I have installed and used wxPython on my work pc (using threading in many apps). However, I attempted to set-up the same environment on my personal computer, and I cannot get the module lib.delayed result to run for anything. I can use wxPython with my applications that don't use threading, but when I attempt to run any app that uses threading, I get the following traceback:
Traceback (most recent call last):
File "<pyshell#0>", line 1, in <module>
import lib.delayedresult
ImportError: No module named lib.delayedresult
I've exhausted what I know to do, at this point .... I appreciate any help/direction in advance.
I am using it by importing like:
import wx.lib.delayedresult as delayedresult
Related
I am trying to use awkward in my Windows 10 system. I am using python 3.8.2.
After installing the package, when I import it, I am getting this DLL import error.
>>> import awkward as ak
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "C:\Users\MSS\Work\PyWorkspace37\awkward_poc\venv\lib\site-packages\awkward\__init__.py", line 23, in <module>
import awkward.layout
File "C:\Users\MSS\Work\PyWorkspace37\awkward_poc\venv\lib\site-packages\awkward\layout.py", line 5, in <module>
from awkward._ext import Index8
ImportError: DLL load failed while importing _ext: The specified module could not be found.
How to know which DLL is missing and how to mitigate it?
The DLL is Awkward Array's C++ part, "awkward/_ext.pyc", which the installation should have put into place. I see two possibilities: (1) the installation went horribly wrong and should be restarted from a clean slate, or (2) the file is there but can't be loaded. If the directory it was installed to doesn't have executable permissions, that could be it. (Python code can be executed from a disk/directory without executable permissions, but native machine code can't be, which can cause some surprises.)
When it comes to installation issues, I can only make guesses because your system is different than mine. We try to use standard installation procedures, so if you use the standard Python inhalation tools (pip, conda) then it ought to work without problems, but evidently that didn't happen here.
I've developed a PyQT5 app that also uses Numpy, Pandas and Plotly. To package it up I decided to use Nuitka however since the product is for the end users who won't be familiar with Python, I want to make sure the interpreter is packaged up along with the app as a single binary (similar to PyInstaller).
I'm running the following command however have been getting errors that I'm struggling to figure out how to fix:
$ python -m nuitka --standalone --show-progress --recurse-all --plugin-enable=numpy main.py
I'm using PyCharm and all the libraries are in the Virtual Environment in project directory. The version of Python I'm using is 3.9.
An executable binary is generated in Windows however upon running I receive the following error message:
C:\Users\user\PycharmProjects\PlotlyExample\main.dist>main
Traceback (most recent call last):
File "C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\numpy\core\__init__.py", line 22, in <module numpy.core>
File "C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\numpy\core\multiarray.py", line 12, in <module numpy.core.multiarray>
File "C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\numpy\core\overrides.py", line 7, in <module numpy.core.overrides>
ImportError: LoadLibraryExW 'C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\numpy\core\_multiarray_umath.pyd' failed: The specified module could not be found.
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\main.py", line 5, in <module>
File "C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\numpy\__init__.py", line 140, in <module numpy>
File "C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\numpy\core\__init__.py", line 48, in <module numpy.core>
ImportError:
IMPORTANT: PLEASE READ THIS FOR ADVICE ON HOW TO SOLVE THIS ISSUE!
Importing the numpy C-extensions failed. This error can happen for
many reasons, often due to issues with your setup or how NumPy was
installed.
We have compiled some common reasons and troubleshooting tips at:
https://numpy.org/devdocs/user/troubleshooting-importerror.html
Please note and check the following:
* The Python version is: Python3.9 from "C:\Users\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\python.exe"
* The NumPy version is: "1.19.3"
and make sure that they are the versions you expect.
Please carefully study the documentation linked above for further help.
Original error was: LoadLibraryExW 'C:\Users\\user\PYCHAR~1\PLOTLY~1\MAIN~1.DIS\numpy\core\_multiarray_umath.pyd' failed: The specified module could not be found.
Sample Code:
https://pastebin.com/RjRYUk0C
Any ideas? Thanks!
I'm unable to go ahead. please help.
this is a link for the code i used
i tried downloading the module using cmd windows 10 but that is also showing an error...
C:\Users\kayza\Desktop\image_converter>python jpgtopng.py jpeg png
Traceback (most recent call last):
File "jpgtopng.py", line 5, in
image_input = sys.argv1
NameError: name 'sys' is not defined
The problem is that you import every module from the package sys. Because of that you can't access them with the dot notation (sys.argv[]).
You have two options to fix this.
Access the method like this argv[] without the sys. in front of it.
(the cleaner option)
Change your import statement to import sys
This question has been asked a few times, but the remedy appears to complicated enough that I'm still searching for a user specific solution.
I recently installed Quandl module using pip command. Even after successful installation my python idle is still showing
Traceback (most recent call last):
File "F:\Python36\Machine Learning\01.py", line 3, in <module>
import Quandl
ModuleNotFoundError: No module named 'Quandl'
I have used import command in my code.
I am using python 3.6.1 version.
I am working on a windows 10 Desktop.
I have also tried re-installation of module.
You can better navigate to your python scripts folder and open a command window there and try pip3 install quandl .Hope this helps.
I am not able to import the zipline.transforms module
>>> from zipline.transforms import batch_transform
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ImportError: No module named 'zipline.transforms'
Disclaimer: I'm currently a maintainer of Zipline.
I'm guessing the reason you're seeing this error is because that particular module was removed a while back (assuming you're using zipline 1.0.0 or later). If you want to do things similar to transforms you'll need to call data.history() to get your pricing data, and call numpy/pandas functions like .avg() or .std(), or use talib.
I think you should firstly print out your sys.path (print sys.path), and then see where you zipline module is installed (somewhere like .../lib/python2.7/site-packages/zipline). Usually "no module named XXX" is caused by you sys.path doesn't contain the path you installed zipline. You should just add your zipline path into sys.path. Also use anaconda is good for zipline (http://www.zipline.io/install.html), so as to keep the environment tidy and clean.