I tried to install the fontconfig-2.11.1 on red hat according to this material , but have following errors while make install:
/usr/share/fonts: caching, new cache contents: 0 fonts, 1 dirs
/usr/share/fonts: failed to write cache
/usr/share/fonts/bitstream-vera: caching, new cache contents: 10 fonts, 0 dirs
/usr/share/fonts/bitstream-vera: failed to write cache
/usr/share/X11/fonts/Type1: skipping, no such directory
/usr/share/X11/fonts/OTF: skipping, no such directory
Re-scanning /usr/share/fonts: /usr/share/fonts: error scanning
/var/cache/fontconfig: not cleaning unwritable cache directory
/home/dn48866/fontconfig-2.11.1/fc-cache/.libs/lt-fc-cache: failed
ia64make[2]: *** [install-data-local] Error 3
ia64make[2]: Leaving directory `/home/dn48866/fontconfig-2.11.1'
ia64make[1]: *** [install-am] Error 2
ia64make[1]: Leaving directory `/home/dn48866/fontconfig-2.11.1'
make: *** [install-recursive] Error 1
Any help is very very very appreciated!
Related
[root#VM-0-15-centos istio]# make build
useradd: UID 0 is not unique
ISTIO_OUT=/work/out/linux_amd64 ISTIO_BIN=/gobin GOOS_LOCAL=linux bin/retry.sh SSL_ERROR_SYSCALL bin/init.sh
Skipping envoy debug. Set DEBUG_IMAGE to download.
/work /work
Downloading envoy: https://storage.googleapis.com/istio-build/proxy/envoy-alpha-432cb173c1e497ae3b05c2af3dadddc91ffa8c65.tar.gz to
real 0m5.408s
user 0m0.731s
sys 0m0.296s
cp: cannot create regular file '': No such file or directory
Unexpected failure: Skipping envoy debug. Set DEBUG_IMAGE to download.
/work /work
Downloading envoy: https://storage.googleapis.com/istio-build/proxy/envoy-alpha-432cb173c1e497ae3b05c2af3dadddc91ffa8c65.tar.gz to
real 0m5.408s
user 0m0.731s
sys 0m0.296s
cp: cannot create regular file '': No such file or directory
Makefile.core.mk:227: recipe for target '/work/out/linux_amd64/istio_is_init' failed
make[1]: *** [/work/out/linux_amd64/istio_is_init] Error 1
make: *** [build] Error 2
Due to the Internet connect is poor on customer side, I copied the tar file of my Yocto Project to customer.
However, customer met an issue while untar the Yocto Project and run the bitbake command to build project on their PC.
Customer got the following build code error:
s32v#s32v-vm:~/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release$ bitbake fsl-image-s32v2xx
ERROR: OE-core's config sanity checker detected a potential misconfiguration.
Either fix the cause of this error or at your own risk disable the checker (see sanity.conf).
Following is the list of potential problems / advisories:
Error, TMPDIR has changed location. You need to either move it back to /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp or rebuild
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
I edited /build_s32v234evb_release/tmp/saved_tmpdir file to re-position the tmp directory, this error has pass.
However, I got another error while building Kernel, it seems the directory parameter is still wrong... (There is no error while building U-Boot only.)
s32v#s32v-vm:~/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release$ bitbake fsl-image-s32v2xx
Loading cache: 100% |########################################################################################################################################################################| ETA: 00:00:00
Loaded 2462 entries from dependency cache.
NOTE: Resolving any missing task queue dependencies
Build Configuration:
BB_VERSION = "1.26.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-14.04"
TARGET_SYS = "aarch64-fsl-linux"
MACHINE = "s32v234evb"
DISTRO = "fsl-networking"
DISTRO_VERSION = "1.8"
TUNE_FEATURES = "aarch64"
TARGET_FPU = ""
meta
meta-yocto
meta-yocto-bsp = "(nobranch):03b0fbcf6b3b5cd16ae16738fbaabd1c6bf98536"
meta-fsl-arm = "(nobranch):c9f259a4bf8472dfa3ff75f1c3fcbe5e0ded7aaf"
meta-fsl-networking = "(nobranch):b8ff02a8d508464a16c84e1d13c155f45aa98cbe"
meta-fsl-toolchain = "(nobranch):0a235c4bcd4057608ee60b8c898eec9509632b95"
meta-virtualization = "(nobranch):0277cbcb47db4239d0a4aa3b37c5c6a705070951"
meta-fsl-s32v = "<unknown>:<unknown>"
meta-oe
meta-networking
meta-python
meta-webserver
meta-filesystems = "(nobranch):c841231b9f327d2d06d19d2ba1324dd86b83617c"
meta-linaro
meta-aarch64
meta-linaro-toolchain = "(nobranch):5075a82bd510d19617803fb16da2375605225cbb"
NOTE: Preparing RunQueue
WARNING: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-kernel/linux/linux-s32v2xx_4.1.26.bb.do_compile is tainted from a forced run
WARNING: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-bsp/u-boot/u-boot-s32v2xx_2016.01.bb.do_compile is tainted from a forced run
WARNING: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-bsp/u-boot/u-boot-s32v2xx_2016.01.bb.do_deploy is tainted from a forced run
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/s32v234evb-fsl-linux/linux-s32v2xx/4.1.26-r0/temp/log.do_compile.17853)
ERROR: Logfile of failure stored in: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/s32v234evb-fsl-linux/linux-s32v2xx/4.1.26-r0/temp/log.do_compile.17853
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4 Image CC=aarch64-fsl-linux-gcc --sysroot=/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/s32v234evb LD=aarch64-fsl-linux-ld.bfd --sysroot=/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/s32v234evb
| make: *** /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work-shared/s32v234evb/kernel-source: No such file or directory. Stop.
| make: *** [__sub-make] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/s32v234evb-fsl-linux/linux-s32v2xx/4.1.26-r0/temp/log.do_compile.17853)
ERROR: Task 76 (/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-kernel/linux/linux-s32v2xx_4.1.26.bb, do_compile) failed with exit code '1'
ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/temp/log.do_compile.17854)
ERROR: Logfile of failure stored in: /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/temp/log.do_compile.17854
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4
| LINK tests/qemu-iotests/socket_scm_helper
| GEN qemu-doc.html
| GEN qemu.1
| CC qga/commands.o
| cc1: warning: /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/x86_64-linux/usr/include/pixman-1: No such file or directory [enabled by default]
| cc1: warning: /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/x86_64-linux/usr/include/glib-2.0: No such file or directory [enabled by default]
| cc1: warning: /media/2T_HDD_for_SDK/Amingo/S32V/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/sysroots/x86_64-linux/usr/lib/glib-2.0/include: No such file or directory [enabled by default]
| /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/qemu-2.2.0/qga/commands.c:13:18: fatal error: glib.h: No such file or directory
| #include <glib.h>
| ^
| compilation terminated.
| make: *** [qga/commands.o] Error 1
| make: *** Waiting for unfinished jobs....
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/build_s32v234evb_release/tmp/work/x86_64-linux/qemu-native/2.2.0-r1/temp/log.do_compile.17854)
ERROR: Task 2849 (virtual:native:/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/poky/meta/recipes-devtools/qemu/qemu_2.2.0.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1504 tasks of which 1502 didn't need to be rerun and 2 failed.
Waiting for 0 running tasks to finish:
Summary: 2 tasks failed:
/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/meta-fsl-s32v/recipes-kernel/linux/linux-s32v2xx_4.1.26.bb, do_compile
virtual:native:/home/s32v/s32v_15.0/yocto_auto_linux_bsp15.0/poky/meta/recipes-devtools/qemu/qemu_2.2.0.bb, do_compile
Summary: There were 3 WARNING messages shown.
Summary: There were 2 ERROR messages shown, returning a non-zero exit code.
My question is:
Is it possible to copy the Yocot Project to another PC by tar file?
What configuration / initial files I need to edit except saved_tmpdir file?
Which file does Yocto Project define the "kernel-source" directory?
Best Regards,
Wayne Kuo
when you copy tar project to another PC, two files will be modified:
build/conf/bblayers.conf
build/tmp/saved_tmpdir
If it's only a matter of internet connection, I suggest you create a download folder mirror.
On your side, you add BB_GENERATE_MIRROR_TARBALLS and build.
Then copy entire DL_DIR folder at customer side, and use BB_NO_NETWORK there.
You can look here and here for usage example.
You can then make a new build at customer side without internet connection. to speed up process, you can also copy your sstate-cache folder to customer side and add a sstate mirror with SSTATE_MIRRORS.
No, you will need a fresh build folder
You need to create a new Yocto environment at customer side
It's bitbake variable STAGING_KERNEL_DIR
Error, TMPDIR has changed location. You need to either move it back to...
I built all yocto stuff with the user jamie. Due to disk space running out, I copied the whole $HOME directory of jamie to another disk /dev/sdb1, which had a larger storage.
When I tried to run bitbake command to make a test, I got the same error. Here is a simple solution which worked for me:
mount /dev/sdb1 /mnt/sdb1/
mount --bind /mnt/sdb1/home_jamie/ /home/jamie/
What I want was to restore the exact original filesystem layout which the bitbake commands were once run with.
To make the above changes permanent, write above mounting as entries of /etc/fstab.
I've been reading through LFS while following the instructions till I got to the point where I needed to compile glibc-2.25 for the actual system.
After running make check, have encountered the following failures:
FAIL: nptl/tst-cond17
FAIL: posix/tst-getaddrinfo4
FAIL: posix/tst-getaddrinfo5
Summary of test results:
3 FAIL
2640 PASS
26 UNSUPPORTED
43 XFAIL
2 XPASS
make[1]: *** [Makefile:355: tests] Error 1
make[1]: Leaving directory '/sources/glibc-2.25'
make: *** [Makefile:9: check] Error 2
Both posix/tst-getaddrinfo4 and posix/tst-getaddrinfo5 failures should pose no real threat as indicated by LFS, but I am not sure about the first failure nptl/tst-cond17.
I have checked the source file and found out that all it does is defining some sort of variable. Here's the code.
#define UNLOCK_AFTER_BROADCAST 1
#include "tst-cond16.c"
Is it not critical to the build process? or should I try to fix it somehow?
EDIT:
The files nptl/tst-cond17.o, nptl/tst-cond17.o.d and nptl/tst-cond17.out are empty, while the contents of the file nptl/tst-cond17.test-result are:
FAIL: nptl/tst-cond17
original exit status 127
I have checked our records, and tst-cond17 is not generally known to generate spurious failures (or as being affected by unfixed kernel bugs). I found a reference to a tst-cond17 failure in the glibc 2.20 release notes, but the submitter comments that, ‘The NPTL failures not mentioned as architecture-independent are thought to result from general unreliability of the board being used for testing.’, so I assume that this does not count.
I would say the tst-cond17 failure is worth investigating further, especially if you can reproduce it.
I am attempting to run bitbake on a recipe with a non-yocto custom source. Using a linux-yocto source works fine, but when I attempt to use the linux-yocto-custom skeleton file provided by the yocto project files, I run into problems.
My file structure looks a little like this:
meta-test
|
.
.
.
+--recipes-kernel/
|
+--linux/
|
+--linux-yocto-custom_3.16.bb
+--linux-yocto-custom/
|
+--defconfig
Here's my modified skeleton file (linux-yocto-custom_3.16.bb):
inherit kernel
require recipes-kernel/linux/linux-yocto.inc
SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;nocheckout=1;name=machine"
SRC_URI += "file://defconfig"
LINUX_VERSION ?= "3.16"
LINUX_VERSION_EXTENSION_append = "-custom"
SRCREV_test="19583ca584d6f574384e17fe7613dfaeadcdc4a6"
PV = "${LINUX_VERSION}+git${SRCPV}"
COMPATIBLE_MACHINE = "test"
Here's the error log:
DEBUG: Executing shell function do_compile
NOTE: make -j 4 bzImage CC=i586-poky-linux-gcc -fuse-ld=bfd LD=i586-poky-linux-ld.bfd
make[1]: Entering directory `/home/me/poky/build/tmp/work/test-poky-linux/linux-yocto-custom/3.16+gitAUTOINC+19583ca584-r0/linux-test-standard-build'
GEN ./Makefile
scripts/kconfig/conf --silentoldconfig Kconfig
SYSTBL arch/x86/syscalls/../include/generated/asm/syscalls_32.h
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_32.h
CHK include/config/kernel.release
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_64.h
UPD include/config/kernel.release
SYSHDR arch/x86/syscalls/../include/generated/uapi/asm/unistd_x32.h
GEN ./Makefile
WRAP arch/x86/include/generated/asm/clkdev.h
WRAP arch/x86/include/generated/asm/early_ioremap.h
WRAP arch/x86/include/generated/asm/cputime.h
WRAP arch/x86/include/generated/asm/mcs_spinlock.h
CHK include/generated/uapi/linux/version.h
UPD include/generated/uapi/linux/version.h
CHK include/generated/utsrelease.h
UPD include/generated/utsrelease.h
HOSTCC scripts/kallsyms
HOSTCC scripts/pnmtologo
CC scripts/mod/empty.o
HOSTCC scripts/mod/mk_elfconfig
CC scripts/mod/devicetable-offsets.s
In file included from /home/me/poky/build/tmp/work-shared/test/kernel-source/include/linux/compiler.h:54:0,
from /home/me/poky/build/tmp/work-shared/test/kernel-source/include/uapi/linux/stddef.h:1,
from /home/me/poky/build/tmp/work-shared/test/kernel-source/include/linux/stddef.h:4,
from /home/me/poky/build/tmp/work-shared/test/kernel-source/include/uapi/linux/posix_types.h:4,
from /home/me/poky/build/tmp/work-shared/test/kernel-source/include/uapi/linux/types.h:13,
from /home/me/poky/build/tmp/work-shared/test/kernel-source/include/linux/types.h:5,
from /home/me/poky/build/tmp/work-shared/test/kernel-source/include/linux/mod_devicetable.h:11,
from /home/me/poky/build/tmp/work-shared/test/kernel-source/scripts/mod/devicetable-offsets.c:2:
/home/me/poky/build/tmp/work-shared/test/kernel-source/include/linux/compiler-gcc.h:106:30: fatal error: linux/compiler-gcc5.h: No such file or directory
compilation terminated.
make[4]: *** [scripts/mod/devicetable-offsets.s] Error 1
make[3]: *** [scripts/mod] Error 2
make[3]: *** Waiting for unfinished jobs....
make[2]: *** [scripts] Error 2
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [sub-make] Error 2
make: *** [__sub-make] Error 2
WARNING: /home/me/poky/build/tmp/work/test-poky-linux/linux-yocto-custom/3.16+gitAUTOINC+19583ca584-r0/temp/run.do_compile.32722:1 exit 1 from
exit 1
ERROR: oe_runmake failed
ERROR: Function failed: do_compile (log file is located at /home/me/poky/build/tmp/work/test-poky-linux/linux-yocto-custom/3.16+gitAUTOINC+19583ca584-r0/temp/log.do_compile.32722)
I believe the most relevant portion is this part of the above log:
compiler-gcc.h:106:30: fatal error: linux/compiler-gcc5.h: No such file or directory
I'm really stumped because a file is generated during the build 'compiler-gcc5.h' at location build/tmp/work/test-poky-linux/core-image-test/1.0-r0/rootfs/usr/src/kernel/include/linux/compiler-gcc5.h. What's going on here? It seems to me that this header file's being requested before being fetched but I don't know how to fix that.
As you're fetching the kernel directly from Linus' tree, the 3.16 version does not support building with gcc5.
If you change to instead fetch from git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git, i.e. the stable tree, and change to v3.16.7:
SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git;protocol=git;nocheckout=1;name=machine;branch=linux-3.16.y"
SRCREV_test = "d0335e4feea0d3f7a8af3116c5dc166239da7521"
then you should be able to build the kernel without any issue.
I have installed xampp and then tuleap in centos and gave /usr/share/tuleap/src/www as document root in /etc/httpd/conf/httpd.conf
When I hit the url, I am getting the following error:
Warning: require_once(pre.php): failed to open stream: No such file or directory in /usr/share/tuleap/src/www/index.php on line 9
Fatal error: require_once(): Failed opening required 'pre.php' (include_path='.:/opt/lampp/lib/php') in /usr/share/tuleap/src/www/index.php on line 9
I am also seeing that the document root points to /usr/share/tuleap/src/www and pre.php is not in this folder. Instead it is at include/pre.php I am totally confused on this directory structure. I didn't change any code after installing tuleap.
Please let me know how to fix this issue.
Thanks in advance!