Why do some numbers lose accuracy when stored as floating point numbers?
For example, the decimal number 9.2 can be expressed exactly as a ratio of two decimal integers (92/10), both of which can be expressed exactly in binary (0b1011100/0b1010). However, the same ratio stored as a floating point number is never exactly equal to 9.2:
32-bit "single precision" float: 9.19999980926513671875
64-bit "double precision" float: 9.199999999999999289457264239899814128875732421875
How can such an apparently simple number be "too big" to express in 64 bits of memory?
In most programming languages, floating point numbers are represented a lot like scientific notation: with an exponent and a mantissa (also called the significand). A very simple number, say 9.2, is actually this fraction:
5179139571476070 * 2 -49
Where the exponent is -49 and the mantissa is 5179139571476070. The reason it is impossible to represent some decimal numbers this way is that both the exponent and the mantissa must be integers. In other words, all floats must be an integer multiplied by an integer power of 2.
9.2 may be simply 92/10, but 10 cannot be expressed as 2n if n is limited to integer values.
Seeing the Data
First, a few functions to see the components that make a 32- and 64-bit float. Gloss over these if you only care about the output (example in Python):
def float_to_bin_parts(number, bits=64):
if bits == 32: # single precision
int_pack = 'I'
float_pack = 'f'
exponent_bits = 8
mantissa_bits = 23
exponent_bias = 127
elif bits == 64: # double precision. all python floats are this
int_pack = 'Q'
float_pack = 'd'
exponent_bits = 11
mantissa_bits = 52
exponent_bias = 1023
else:
raise ValueError, 'bits argument must be 32 or 64'
bin_iter = iter(bin(struct.unpack(int_pack, struct.pack(float_pack, number))[0])[2:].rjust(bits, '0'))
return [''.join(islice(bin_iter, x)) for x in (1, exponent_bits, mantissa_bits)]
There's a lot of complexity behind that function, and it'd be quite the tangent to explain, but if you're interested, the important resource for our purposes is the struct module.
Python's float is a 64-bit, double-precision number. In other languages such as C, C++, Java and C#, double-precision has a separate type double, which is often implemented as 64 bits.
When we call that function with our example, 9.2, here's what we get:
>>> float_to_bin_parts(9.2)
['0', '10000000010', '0010011001100110011001100110011001100110011001100110']
Interpreting the Data
You'll see I've split the return value into three components. These components are:
Sign
Exponent
Mantissa (also called Significand, or Fraction)
Sign
The sign is stored in the first component as a single bit. It's easy to explain: 0 means the float is a positive number; 1 means it's negative. Because 9.2 is positive, our sign value is 0.
Exponent
The exponent is stored in the middle component as 11 bits. In our case, 0b10000000010. In decimal, that represents the value 1026. A quirk of this component is that you must subtract a number equal to 2(# of bits) - 1 - 1 to get the true exponent; in our case, that means subtracting 0b1111111111 (decimal number 1023) to get the true exponent, 0b00000000011 (decimal number 3).
Mantissa
The mantissa is stored in the third component as 52 bits. However, there's a quirk to this component as well. To understand this quirk, consider a number in scientific notation, like this:
6.0221413x1023
The mantissa would be the 6.0221413. Recall that the mantissa in scientific notation always begins with a single non-zero digit. The same holds true for binary, except that binary only has two digits: 0 and 1. So the binary mantissa always starts with 1! When a float is stored, the 1 at the front of the binary mantissa is omitted to save space; we have to place it back at the front of our third element to get the true mantissa:
1.0010011001100110011001100110011001100110011001100110
This involves more than just a simple addition, because the bits stored in our third component actually represent the fractional part of the mantissa, to the right of the radix point.
When dealing with decimal numbers, we "move the decimal point" by multiplying or dividing by powers of 10. In binary, we can do the same thing by multiplying or dividing by powers of 2. Since our third element has 52 bits, we divide it by 252 to move it 52 places to the right:
0.0010011001100110011001100110011001100110011001100110
In decimal notation, that's the same as dividing 675539944105574 by 4503599627370496 to get 0.1499999999999999. (This is one example of a ratio that can be expressed exactly in binary, but only approximately in decimal; for more detail, see: 675539944105574 / 4503599627370496.)
Now that we've transformed the third component into a fractional number, adding 1 gives the true mantissa.
Recapping the Components
Sign (first component): 0 for positive, 1 for negative
Exponent (middle component): Subtract 2(# of bits) - 1 - 1 to get the true exponent
Mantissa (last component): Divide by 2(# of bits) and add 1 to get the true mantissa
Calculating the Number
Putting all three parts together, we're given this binary number:
1.0010011001100110011001100110011001100110011001100110 x 1011
Which we can then convert from binary to decimal:
1.1499999999999999 x 23 (inexact!)
And multiply to reveal the final representation of the number we started with (9.2) after being stored as a floating point value:
9.1999999999999993
Representing as a Fraction
9.2
Now that we've built the number, it's possible to reconstruct it into a simple fraction:
1.0010011001100110011001100110011001100110011001100110 x 1011
Shift mantissa to a whole number:
10010011001100110011001100110011001100110011001100110 x 1011-110100
Convert to decimal:
5179139571476070 x 23-52
Subtract the exponent:
5179139571476070 x 2-49
Turn negative exponent into division:
5179139571476070 / 249
Multiply exponent:
5179139571476070 / 562949953421312
Which equals:
9.1999999999999993
9.5
>>> float_to_bin_parts(9.5)
['0', '10000000010', '0011000000000000000000000000000000000000000000000000']
Already you can see the mantissa is only 4 digits followed by a whole lot of zeroes. But let's go through the paces.
Assemble the binary scientific notation:
1.0011 x 1011
Shift the decimal point:
10011 x 1011-100
Subtract the exponent:
10011 x 10-1
Binary to decimal:
19 x 2-1
Negative exponent to division:
19 / 21
Multiply exponent:
19 / 2
Equals:
9.5
Further reading
The Floating-Point Guide: What Every Programmer Should Know About Floating-Point Arithmetic, or, Why don’t my numbers add up? (floating-point-gui.de)
What Every Computer Scientist Should Know About Floating-Point Arithmetic (Goldberg 1991)
IEEE Double-precision floating-point format (Wikipedia)
Floating Point Arithmetic: Issues and Limitations (docs.python.org)
Floating Point Binary
This isn't a full answer (mhlester already covered a lot of good ground I won't duplicate), but I would like to stress how much the representation of a number depends on the base you are working in.
Consider the fraction 2/3
In good-ol' base 10, we typically write it out as something like
0.666...
0.666
0.667
When we look at those representations, we tend to associate each of them with the fraction 2/3, even though only the first representation is mathematically equal to the fraction. The second and third representations/approximations have an error on the order of 0.001, which is actually much worse than the error between 9.2 and 9.1999999999999993. In fact, the second representation isn't even rounded correctly! Nevertheless, we don't have a problem with 0.666 as an approximation of the number 2/3, so we shouldn't really have a problem with how 9.2 is approximated in most programs. (Yes, in some programs it matters.)
Number bases
So here's where number bases are crucial. If we were trying to represent 2/3 in base 3, then
(2/3)10 = 0.23
In other words, we have an exact, finite representation for the same number by switching bases! The take-away is that even though you can convert any number to any base, all rational numbers have exact finite representations in some bases but not in others.
To drive this point home, let's look at 1/2. It might surprise you that even though this perfectly simple number has an exact representation in base 10 and 2, it requires a repeating representation in base 3.
(1/2)10 = 0.510 = 0.12 = 0.1111...3
Why are floating point numbers inaccurate?
Because often-times, they are approximating rationals that cannot be represented finitely in base 2 (the digits repeat), and in general they are approximating real (possibly irrational) numbers which may not be representable in finitely many digits in any base.
While all of the other answers are good there is still one thing missing:
It is impossible to represent irrational numbers (e.g. π, sqrt(2), log(3), etc.) precisely!
And that actually is why they are called irrational. No amount of bit storage in the world would be enough to hold even one of them. Only symbolic arithmetic is able to preserve their precision.
Although if you would limit your math needs to rational numbers only the problem of precision becomes manageable. You would need to store a pair of (possibly very big) integers a and b to hold the number represented by the fraction a/b. All your arithmetic would have to be done on fractions just like in highschool math (e.g. a/b * c/d = ac/bd).
But of course you would still run into the same kind of trouble when pi, sqrt, log, sin, etc. are involved.
TL;DR
For hardware accelerated arithmetic only a limited amount of rational numbers can be represented. Every not-representable number is approximated. Some numbers (i.e. irrational) can never be represented no matter the system.
There are infinitely many real numbers (so many that you can't enumerate them), and there are infinitely many rational numbers (it is possible to enumerate them).
The floating-point representation is a finite one (like anything in a computer) so unavoidably many many many numbers are impossible to represent. In particular, 64 bits only allow you to distinguish among only 18,446,744,073,709,551,616 different values (which is nothing compared to infinity). With the standard convention, 9.2 is not one of them. Those that can are of the form m.2^e for some integers m and e.
You might come up with a different numeration system, 10 based for instance, where 9.2 would have an exact representation. But other numbers, say 1/3, would still be impossible to represent.
Also note that double-precision floating-points numbers are extremely accurate. They can represent any number in a very wide range with as much as 15 exact digits. For daily life computations, 4 or 5 digits are more than enough. You will never really need those 15, unless you want to count every millisecond of your lifetime.
Why can we not represent 9.2 in binary floating point?
Floating point numbers are (simplifying slightly) a positional numbering system with a restricted number of digits and a movable radix point.
A fraction can only be expressed exactly using a finite number of digits in a positional numbering system if the prime factors of the denominator (when the fraction is expressed in it's lowest terms) are factors of the base.
The prime factors of 10 are 5 and 2, so in base 10 we can represent any fraction of the form a/(2b5c).
On the other hand the only prime factor of 2 is 2, so in base 2 we can only represent fractions of the form a/(2b)
Why do computers use this representation?
Because it's a simple format to work with and it is sufficiently accurate for most purposes. Basically the same reason scientists use "scientific notation" and round their results to a reasonable number of digits at each step.
It would certainly be possible to define a fraction format, with (for example) a 32-bit numerator and a 32-bit denominator. It would be able to represent numbers that IEEE double precision floating point could not, but equally there would be many numbers that can be represented in double precision floating point that could not be represented in such a fixed-size fraction format.
However the big problem is that such a format is a pain to do calculations on. For two reasons.
If you want to have exactly one representation of each number then after each calculation you need to reduce the fraction to it's lowest terms. That means that for every operation you basically need to do a greatest common divisor calculation.
If after your calculation you end up with an unrepresentable result because the numerator or denominator you need to find the closest representable result. This is non-trivil.
Some Languages do offer fraction types, but usually they do it in combination with arbitary precision, this avoids needing to worry about approximating fractions but it creates it's own problem, when a number passes through a large number of calculation steps the size of the denominator and hence the storage needed for the fraction can explode.
Some languages also offer decimal floating point types, these are mainly used in scenarios where it is imporant that the results the computer gets match pre-existing rounding rules that were written with humans in mind (chiefly financial calculations). These are slightly more difficult to work with than binary floating point, but the biggest problem is that most computers don't offer hardware support for them.
I'm using Python3's decimal module. Is the underlying arithmetic done using the processors floating point types, or does it use integers? The notion that the results are 'exact' and of arbitrary precision suggests to me that integer maths is used below the surface.
Indeed it is integer math, not float math for sure. Roughly speaking every float is two parts - before and after the decimal dot (integer and the remainder). Thanks to that the calculations are done using integer arithmetic and hence are not rounded up so they are staying precise even if you sum up a very large value with a very small fraction.
This comes at a price - the number of operations is significantly larger and it is not always necessary to be so precise at all times. That is why most of the calculations are done using float arithmetic that may cause a loss of precision when there are many arithmetic operations on floats or there are significant differences between the values (e.g. 10^10 ratio and more). There is a separate field of computer science: numerical analysis or numerical methods that study the clever ways to get the most of the speed of float calculations while maintaining highest precision possible.
I'm a bit confused of the local space coordinate system. Suppose I have a complex object in the local space. I know when I want to put it in the world space I have to multiply it with Scale,Rotate,Translate matrix. But the problem is the local coordinate only ranged from -1.0f to 1.0f, when I want to have vertex like (1/500,1/100,1/100) things will not work, everything will become 0 due to the float accuracy problem.
The only solution to me now is separate them into lots of local space systems and ProjectView each individually to put them together. It seems not the correct way of solving the problem. I've been checked lots of books but none of them mentioned this issue. I really want to know how to solve it.
when I want to have vertex like (1/500,1/100,1/100) things will not work
What makes you think that? The float accuracy problem does not mean something will coerce to 0 if it can't be accurately represented. It just means, it will coerce to the floating point number closest to the intended figure.
It's the very same as writing down, e.g., 3/9 with at most 6 significant decimal digits: 0.33334 – it didn't coerce to 0. And the very same goes for floating point.
Now you may be familiar with scientific notation: x·10^y – this is essentially decimal floating point, a mantissa x and an exponent y which essentially specifies the order of magnitude. In binary floating point it becomes x·2^y. In either case the significant digits are in the mantissa. Your typical floating point number (in OpenGL) has a mantissa of 23 bits, which boils down to an amount of 22 significant binary digits (which are about 7 decimal digits).
I really want to know how to solve it.
The real trouble with floating point numbers is, if you have to mix and merge numbers over a large range of orders of magnitudes. As long as the numbers are of similar order of magnitudes, everything happens with just the mantissa. And that one last change in order of magnitude to the [-1, 1] range will not hurt you; heck this can be done by "normalizing" the floating point value and then simply dropping the exponent.
Recommended read: http://floating-point-gui.de/
Update
One further thing: If you're writing 1/500 in a language like C, then you're performing an integer division and that will of course round down to 0. If you want this to be a floating point operation you either have to write floating point literals or cast to float, i.e.
1./500.
or
(float)1/(float)500
Note that casting one of the operands to float suffices to make this a floating point division.
How can I implement a code in verilog that resolves a exponential equation that has numbers that must be represented as fixed point.
For example I have this equation on C++ and wish to convert to Verilog or VHDL:
double y = 0.1+0.75*(1.0/(1.0+exp((x[i]+40.5)/6.0)));
Where 'y' and 'x' must be fixed point numbers. And 'x' is a vector also.
I looked up for modules and libraries that has fixed point but none of them have exponentials.
Verilog has a real data type that provides simulation-time support for floating-point numbers. It also has an exponentiation operator, e.g., a ** b computes a to the power of b.
However, code written using the real datatype is generally not synthesizable. Instead, in real hardware designs, support for fixed and floating point numbers is generally achieved by implementing arithmetic logic units that implement, e.g., the IEEE floating point standard.
Most of the time, such a design will require at least a couple of cycles even for basic operations like addition and multiplication. More complex algorithms like division, sine, cosine, etc., are generally implemented using algorithms based on approximating polynomials.
If you really want to understand how to represent and manipulate fixed point and floating point numbers, you should probably get a textbook for a mathematics course such as Numerical Methods, or an EE course on Computer Arithmetic.
Most commonly I see in programs that convert radians to degrees and degrees to radians for trigonometry people always use two different ways to get the radian constant.
double PI = 3.14159265358979;
double Radians = (2 * PI) / 360;
Most commonly I see the one shown below:
double Radians = PI / 180;
From my understanding they both seem to generate the same value, but it seems that the one with 360 looks better. After all it's the angle for a full circle and the other one uses the 180 which is half the circle, also I always learned that PI is for calculating distances in circles so multiplying it by 2 makes no sense to me.
Only thing I can understand from this is that it's some kind of scaling going on here to generate same results.
But shouldn't they both give a little difference anyway?
Since PI is a irrational number, meaning the 180 variant should be less precise?
Yeah my math logic are not good sorry about that.
I think it's just preferential. The first way more closely maps to what you might have learned in school algebra ("there are 2*PI radians in a circle") - it makes explicit what the calculation is. The 2nd way is a reduction of the first. On a modern compiler, both should be equally efficient (though I'd use floating point constants instead of ints). Bottom line: no important difference.