Related
I have a file, the content of file has a string like this:
'/ad/e','#'.base64_decode("ZXZhbA==").'($zad)', 'add'
I want to check the file has this string. But when I use grep to check, It always return false. I try some ways:
grep "'/ad/e','#'.base64_decode("ZXZhbA==").'($zad)', 'add'" foo.txt
grep "'/ad/e','#'\.base64_decode\("ZXZhbA\=\="\)\.'\(\$zad\)', 'add'" foo.txt
str="'/ad/e','#'\.base64_decode\("ZXZhbA\=\="\)\.'\(\$zad\)', 'add'"
grep "$str" foo.txt
Can you help me? Maybe, another command line.
This is my case:
while read str; do
if [ ! -z "$str" ]; then
if grep -Fxq "$str" "$file_path"; then
do somthing
fi
fi
done < <(cat /usr/local/caotoc/db.dat)
Thank you so much!
First, you need to make sure the string is quoted properly. This is a bit of an art form, since your string contains both single and double quotes.
One thought would be to use read and a here-document to avoid having to escape anything.
Second, you need to use -F to perform exact string matching instead of more general regular-expression matching.
IFS= read -r str <<'EOF'
'/ad/e','#'.base64_decode("ZXZhbA==").'($zad)', 'add'
EOF
grep -F "$str" foo.txt
Based on the update, you can use a simple loop to read them one at a time.
while IFS= read -r str; do
grep -F "$str" foo.txt
done < /usr/local/caotoc/db.dat
You may be able to simply use the -f option to grep, which will cause grep to output lines from foo.txt that match any line from db.dat.
grep -f /usr/local/caotoc/db.dat -F foo.txt
Instead of trying to workaround regexes, the simplest way is to turn off regular expressions using -F (or --fixed-strings) option, which makes grep act like a simple string search
-F, --fixed-strings PATTERN is a set of newline-separated strings
like this:
grep -F "'/ad/e','#'.base64_decode(\"ZXZhbA==\").'(\$zad)', 'add'" test
Note: because of the shell, you still need to escape:
double quotes
dollar sign or else $zad is evaluated as an environment variable
I have need to execute a command in a script an arbitrary number of times with associated arbitrary parameters.
I've decided the script will take its cue from a parameter file (parameter.txt) where lines are of the form:
label param1 param2
For each line in parameter.txt, I'll call the command with the specified parameters.
So far, my tinkering is moving along the lines of the following, but it's looking messy:
while read line; do
echo $line | sed -r 's/[^ ]+ ([^ ]+).+/\1/' &&
echo $line | sed -r 's/[^ ]+ [^ ]+ ([^ ]+)/\1/'
done < parameter.txt
My command is of the form:
mycmd -a param1 -b param2 > label
Could I get some suggestions how I might simplify this?
I'm doing this for a small embedded system whose 'helper' commands are in short supply (xargs for example isn't available, and things like awk are hobbled busybox implementations), and I'm using version 2 (2.04g I think) of BASH.
while read label param1 param2; do
mycmd -a "$param1" -b "$param2" > "$label"
done < parameter.txt
I'd suggest a function, as long as there aren't any embedded spaces.
function x()
{
mycmd -a $2 -b $3 >$1
}
while read line; do x $line ; done <parameter.txt
Try this:
while read line ; do
set -- $line
dest="$1"
shift
mycmd "$#" > "$dest"
done < parameter.txt
should work. If the parameters in the file have spaces, you will have to quote them properly.
I suggest to add the -a, -b to the file parameter.txt because generating them on the fly is probably brittle.
If you don't like this solution, then I suggest to create a new script from this one which contains the actual commands. That way, you can easily debug any problems.
When the script looks okay, you can source it with source ./generated.sh (yes, you have to specify the path).
Say, I have a file foo.txt specifying N arguments
arg1
arg2
...
argN
which I need to pass to the command my_command
How do I use the lines of a file as arguments of a command?
If your shell is bash (amongst others), a shortcut for $(cat afile) is $(< afile), so you'd write:
mycommand "$(< file.txt)"
Documented in the bash man page in the 'Command Substitution' section.
Alterately, have your command read from stdin, so: mycommand < file.txt
As already mentioned, you can use the backticks or $(cat filename).
What was not mentioned, and I think is important to note, is that you must remember that the shell will break apart the contents of that file according to whitespace, giving each "word" it finds to your command as an argument. And while you may be able to enclose a command-line argument in quotes so that it can contain whitespace, escape sequences, etc., reading from the file will not do the same thing. For example, if your file contains:
a "b c" d
the arguments you will get are:
a
"b
c"
d
If you want to pull each line as an argument, use the while/read/do construct:
while read i ; do command_name $i ; done < filename
command `< file`
will pass file contents to the command on stdin, but will strip newlines, meaning you couldn't iterate over each line individually. For that you could write a script with a 'for' loop:
for line in `cat input_file`; do some_command "$line"; done
Or (the multi-line variant):
for line in `cat input_file`
do
some_command "$line"
done
Or (multi-line variant with $() instead of ``):
for line in $(cat input_file)
do
some_command "$line"
done
References:
For loop syntax: https://www.cyberciti.biz/faq/bash-for-loop/
You do that using backticks:
echo World > file.txt
echo Hello `cat file.txt`
If you want to do this in a robust way that works for every possible command line argument (values with spaces, values with newlines, values with literal quote characters, non-printable values, values with glob characters, etc), it gets a bit more interesting.
To write to a file, given an array of arguments:
printf '%s\0' "${arguments[#]}" >file
...replace with "argument one", "argument two", etc. as appropriate.
To read from that file and use its contents (in bash, ksh93, or another recent shell with arrays):
declare -a args=()
while IFS='' read -r -d '' item; do
args+=( "$item" )
done <file
run_your_command "${args[#]}"
To read from that file and use its contents (in a shell without arrays; note that this will overwrite your local command-line argument list, and is thus best done inside of a function, such that you're overwriting the function's arguments and not the global list):
set --
while IFS='' read -r -d '' item; do
set -- "$#" "$item"
done <file
run_your_command "$#"
Note that -d (allowing a different end-of-line delimiter to be used) is a non-POSIX extension, and a shell without arrays may also not support it. Should that be the case, you may need to use a non-shell language to transform the NUL-delimited content into an eval-safe form:
quoted_list() {
## Works with either Python 2.x or 3.x
python -c '
import sys, pipes, shlex
quote = pipes.quote if hasattr(pipes, "quote") else shlex.quote
print(" ".join([quote(s) for s in sys.stdin.read().split("\0")][:-1]))
'
}
eval "set -- $(quoted_list <file)"
run_your_command "$#"
If all you need to do is to turn file arguments.txt with contents
arg1
arg2
argN
into my_command arg1 arg2 argN then you can simply use xargs:
xargs -a arguments.txt my_command
You can put additional static arguments in the xargs call, like xargs -a arguments.txt my_command staticArg which will call my_command staticArg arg1 arg2 argN
Here's how I pass contents of a file as an argument to a command:
./foo --bar "$(cat ./bar.txt)"
None of the answers seemed to work for me or were too complicated. Luckily, it's not complicated with xargs (Tested on Ubuntu 20.04).
This works with each arg on a separate line in the file as the OP mentions and was what I needed as well.
cat foo.txt | xargs my_command
One thing to note is that it doesn't seem to work with aliased commands.
The accepted answer works if the command accepts multiple args wrapped in a string. In my case using (Neo)Vim it does not and the args are all stuck together.
xargs does it properly and actually gives you separate arguments supplied to the command.
I suggest using:
command $(echo $(tr '\n' ' ' < parameters.cfg))
Simply trim the end-line characters and replace them with spaces, and then push the resulting string as possible separate arguments with echo.
In my bash shell the following worked like a charm:
cat input_file | xargs -I % sh -c 'command1 %; command2 %; command3 %;'
where input_file is
arg1
arg2
arg3
As evident, this allows you to execute multiple commands with each line from input_file, a nice little trick I learned here.
Both solutions work even when lines have spaces:
readarray -t my_args < foo.txt
my_command "${my_args[#]}"
if readarray doesn't work, replace it with mapfile, they're synonyms.
I formerly tried this one below, but had problems when my_command was a script:
xargs -d '\n' -a foo.txt my_command
After editing #Wesley Rice's answer a couple times, I decided my changes were just getting too big to continue changing his answer instead of writing my own. So, I decided I need to write my own!
Read each line of a file in and operate on it line-by-line like this:
#!/bin/bash
input="/path/to/txt/file"
while IFS= read -r line
do
echo "$line"
done < "$input"
This comes directly from author Vivek Gite here: https://www.cyberciti.biz/faq/unix-howto-read-line-by-line-from-file/. He gets the credit!
Syntax: Read file line by line on a Bash Unix & Linux shell:
1. The syntax is as follows for bash, ksh, zsh, and all other shells to read a file line by line
2. while read -r line; do COMMAND; done < input.file
3. The -r option passed to read command prevents backslash escapes from being interpreted.
4. Add IFS= option before read command to prevent leading/trailing whitespace from being trimmed -
5. while IFS= read -r line; do COMMAND_on $line; done < input.file
And now to answer this now-closed question which I also had: Is it possible to `git add` a list of files from a file? - here's my answer:
Note that FILES_STAGED is a variable containing the absolute path to a file which contains a bunch of lines where each line is a relative path to a file I'd like to do git add on. This code snippet is about to become part of the "eRCaGuy_dotfiles/useful_scripts/sync_git_repo_to_build_machine.sh" file in this project, to enable easy syncing of files in development from one PC (ex: a computer I code on) to another (ex: a more powerful computer I build on): https://github.com/ElectricRCAircraftGuy/eRCaGuy_dotfiles.
while IFS= read -r line
do
echo " git add \"$line\""
git add "$line"
done < "$FILES_STAGED"
References:
Where I copied my answer from: https://www.cyberciti.biz/faq/unix-howto-read-line-by-line-from-file/
For loop syntax: https://www.cyberciti.biz/faq/bash-for-loop/
Related:
How to read contents of file line-by-line and do git add on it: Is it possible to `git add` a list of files from a file?
I need to add the following line to the end of a config file:
include "/configs/projectname.conf"
to a file called lighttpd.conf
I am looking into using sed to do this, but I can't work out how.
How would I only insert it if the line doesn't already exist?
Just keep it simple :)
grep + echo should suffice:
grep -qxF 'include "/configs/projectname.conf"' foo.bar || echo 'include "/configs/projectname.conf"' >> foo.bar
-q be quiet
-x match the whole line
-F pattern is a plain string
https://linux.die.net/man/1/grep
Edit:
incorporated #cerin and #thijs-wouters suggestions.
This would be a clean, readable and reusable solution using grep and echo to add a line to a file only if it doesn't already exist:
LINE='include "/configs/projectname.conf"'
FILE='lighttpd.conf'
grep -qF -- "$LINE" "$FILE" || echo "$LINE" >> "$FILE"
If you need to match the whole line use grep -xqF
Add -s to ignore errors when the file does not exist, creating a new file with just that line.
Try this:
grep -q '^option' file && sed -i 's/^option.*/option=value/' file || echo 'option=value' >> file
Using sed, the simplest syntax:
sed \
-e '/^\(option=\).*/{s//\1value/;:a;n;ba;q}' \
-e '$aoption=value' filename
This would replace the parameter if it exists, else would add it to the bottom of the file.
Use the -i option if you want to edit the file in-place.
If you want to accept and keep white spaces, and in addition to remove the comment, if the line already exists, but is commented out, write:
sed -i \
-e '/^#\?\(\s*option\s*=\s*\).*/{s//\1value/;:a;n;ba;q}' \
-e '$aoption=value' filename
Please note that neither option nor value must contain a slash /, or you will have to escape it to \/.
To use bash-variables $option and $value, you could write:
sed -i \
-e '/^#\?\(\s*'${option//\//\\/}'\s*=\s*\).*/{s//\1'${value//\//\\/}'/;:a;n;ba;q}' \
-e '$a'${option//\//\\/}'='${value//\//\\/} filename
The bash expression ${option//\//\\/} quotes slashes, it replaces all / with \/.
Note: Just trapped into a problem. In bash you may quote "${option//\//\\/}", but in the sh of busybox, this does not work, so you should avoid the quotes, at least in non-bourne-shells.
All combined in a bash function:
# call option with parameters: $1=name $2=value $3=file
function option() {
name=${1//\//\\/}
value=${2//\//\\/}
sed -i \
-e '/^#\?\(\s*'"${name}"'\s*=\s*\).*/{s//\1'"${value}"'/;:a;n;ba;q}' \
-e '$a'"${name}"'='"${value}" $3
}
Explanation:
/^\(option=\).*/: Match lines that start with option= and (.*) ignore everything after the =. The \(…\) encloses the part we will reuse as \1later.
/^#?(\s*'"${option//////}"'\s*=\s*).*/: Ignore commented out code with # at the begin of line. \? means «optional». The comment will be removed, because it is outside of the copied part in \(…\). \s* means «any number of white spaces» (space, tabulator). White spaces are copied, since they are within \(…\), so you do not lose formatting.
/^\(option=\).*/{…}: If matches a line /…/, then execute the next command. Command to execute is not a single command, but a block {…}.
s//…/: Search and replace. Since the search term is empty //, it applies to the last match, which was /^\(option=\).*/.
s//\1value/: Replace the last match with everything in (…), referenced by \1and the textvalue`
:a;n;ba;q: Set label a, then read next line n, then branch b (or goto) back to label a, that means: read all lines up to the end of file, so after the first match, just fetch all following lines without further processing. Then q quit and therefore ignore everything else.
$aoption=value: At the end of file $, append a the text option=value
More information on sed and a command overview is on my blog:
https://marc.wäckerlin.ch/computer/stream-editor-sed-overview-and-reference
If writing to a protected file, #drAlberT and #rubo77 's answers might not work for you since one can't sudo >>. A similarly simple solution, then, would be to use tee --append (or, on MacOS, tee -a):
LINE='include "/configs/projectname.conf"'
FILE=lighttpd.conf
grep -qF "$LINE" "$FILE" || echo "$LINE" | sudo tee --append "$FILE"
Here's a sed version:
sed -e '\|include "/configs/projectname.conf"|h; ${x;s/incl//;{g;t};a\' -e 'include "/configs/projectname.conf"' -e '}' file
If your string is in a variable:
string='include "/configs/projectname.conf"'
sed -e "\|$string|h; \${x;s|$string||;{g;t};a\\" -e "$string" -e "}" file
If, one day, someone else have to deal with this code as "legacy code", then that person will be grateful if you write a less exoteric code, such as
grep -q -F 'include "/configs/projectname.conf"' lighttpd.conf
if [ $? -ne 0 ]; then
echo 'include "/configs/projectname.conf"' >> lighttpd.conf
fi
another sed solution is to always append it on the last line and delete a pre existing one.
sed -e '$a\' -e '<your-entry>' -e "/<your-entry-properly-escaped>/d"
"properly-escaped" means to put a regex that matches your entry, i.e. to escape all regex controls from your actual entry, i.e. to put a backslash in front of ^$/*?+().
this might fail on the last line of your file or if there's no dangling newline, I'm not sure, but that could be dealt with by some nifty branching...
Here is a one-liner sed which does the job inline. Note that it preserves the location of the variable and its indentation in the file when it exists. This is often important for the context, like when there are comments around or when the variable is in an indented block. Any solution based on "delete-then-append" paradigm fails badly at this.
sed -i '/^[ \t]*option=/{h;s/=.*/=value/};${x;/^$/{s//option=value/;H};x}' test.conf
With a generic pair of variable/value you can write it this way:
var=c
val='12 34' # it handles spaces nicely btw
sed -i '/^[ \t]*'"$var"'=/{h;s/=.*/='"$val"'/};${x;/^$/{s//c='"$val"'/;H};x}' test.conf
Finally, if you want also to keep inline comments, you can do it with a catch group. E.g. if test.conf contains the following:
a=123
# Here is "c":
c=999 # with its own comment and indent
b=234
d=567
Then running this
var='c'
val='"yay"'
sed -i '/^[ \t]*'"$var"'=/{h;s/=[^#]*\(.*\)/='"$val"'\1/;s/'"$val"'#/'"$val"' #/};${x;/^$/{s//'"$var"'='"$val"'/;H};x}' test.conf
Produces that:
a=123
# Here is "c":
c="yay" # with its own comment and indent
b=234
d=567
As an awk-only one-liner:
awk -v s=option=value '/^option=/{$0=s;f=1} {a[++n]=$0} END{if(!f)a[++n]=s;for(i=1;i<=n;i++)print a[i]>ARGV[1]}' file
ARGV[1] is your input file. It is opened and written to in the for loop of theEND block. Opening file for output in the END block replaces the need for utilities like sponge or writing to a temporary file and then mving the temporary file to file.
The two assignments to array a[] accumulate all output lines into a. if(!f)a[++n]=s appends the new option=value if the main awk loop couldn't find option in file.
I have added some spaces (not many) for readability, but you really need just one space in the whole awk program, the space after print.
If file includes # comments they will be preserved.
Here's an awk implementation
/^option *=/ {
print "option=value"; # print this instead of the original line
done=1; # set a flag, that the line was found
next # all done for this line
}
{print} # all other lines -> print them
END { # end of file
if(done != 1) # haven't found /option=/ -> add it at the end of output
print "option=value"
}
Run it using
awk -f update.awk < /etc/fdm_monitor.conf > /etc/fdm_monitor.conf.tmp && \
mv /etc/fdm_monitor.conf.tmp /etc/fdm_monitor.conf
or
awk -f update.awk < /etc/fdm_monitor.conf | sponge /etc/fdm_monitor.conf
EDIT:
As a one-liner:
awk '/^option *=/ {print "option=value";d=1;next}{print}END{if(d!=1)print "option=value"}' /etc/fdm_monitor.conf | sponge /etc/fdm_monitor.conf
use awk
awk 'FNR==NR && /configs.*projectname\.conf/{f=1;next}f==0;END{ if(!f) { print "your line"}} ' file file
sed -i 's/^option.*/option=value/g' /etc/fdm_monitor.conf
grep -q "option=value" /etc/fdm_monitor.conf || echo "option=value" >> /etc/fdm_monitor.conf
here is an awk one-liner:
awk -v s="option=value" '/^option/{f=1;$0=s}7;END{if(!f)print s}' file
this doesn't do in-place change on the file, you can however :
awk '...' file > tmpfile && mv tmpfile file
Using sed, you could say:
sed -e '/option=/{s/.*/option=value/;:a;n;:ba;q}' -e 'aoption=value' filename
This would replace the parameter if it exists, else would add it to the bottom of the file.
Use the -i option if you want to edit the file in-place:
sed -i -e '/option=/{s/.*/option=value/;:a;n;:ba;q}' -e 'aoption=value' filename
sed -i '1 h
1 !H
$ {
x
s/^option.*/option=value/g
t
s/$/\
option=value/
}' /etc/fdm_monitor.conf
Load all the file in buffer, at the end, change all occurence and if no change occur, add to the end
The answers using grep are wrong. You need to add an -x option to match the entire line otherwise lines like #text to add will still match when looking to add exactly text to add.
So the correct solution is something like:
grep -qxF 'include "/configs/projectname.conf"' foo.bar || echo 'include "/configs/projectname.conf"' >> foo.bar
Using sed: It will insert at the end of line. You can also pass in variables as usual of course.
grep -qxF "port=9033" $light.conf
if [ $? -ne 0 ]; then
sed -i "$ a port=9033" $light.conf
else
echo "port=9033 already added"
fi
Using oneliner sed
grep -qxF "port=9033" $lightconf || sed -i "$ a port=9033" $lightconf
Using echo may not work under root, but will work like this. But it will not let you automate things if you are looking to do it since it might ask for password.
I had a problem when I was trying to edit from the root for a particular user. Just adding the $username before was a fix for me.
grep -qxF "port=9033" light.conf
if [ $? -ne 0 ]; then
sudo -u $user_name echo "port=9033" >> light.conf
else
echo "already there"
fi
I elaborated on kev's grep/sed solution by setting variables in order to reduce duplication.
Set the variables in the first line (hint: $_option shall match everything on the line up until the value [including any seperator like = or :]).
_file="/etc/ssmtp/ssmtp.conf" _option="mailhub=" _value="my.domain.tld" \
sh -c '\
grep -q "^$_option" "$_file" \
&& sed -i "s/^$_option.*/$_option$_value/" "$_file" \
|| echo "$_option$_value" >> "$_file"\
'
Mind that the sh -c '...' just has the effect of widening the scope of the variables without the need for an export. (See Setting an environment variable before a command in bash not working for second command in a pipe)
You can use this function to find and search config changes:
#!/bin/bash
#Find and Replace config values
find_and_replace_config () {
file=$1
var=$2
new_value=$3
awk -v var="$var" -v new_val="$new_value" 'BEGIN{FS=OFS="="}match($1, "^\\s*" var "\\s*") {$2=" " new_val}1' "$file" > output.tmp && sudo mv output.tmp $file
}
find_and_replace_config /etc/php5/apache2/php.ini max_execution_time 60
If you want to run this command using a python script within a Linux terminal...
import os,sys
LINE = 'include '+ <insert_line_STRING>
FILE = <insert_file_path_STRING>
os.system('grep -qxF $"'+LINE+'" '+FILE+' || echo $"'+LINE+'" >> '+FILE)
The $ and double quotations had me in a jungle, but this worked.
Thanks everyone
Try:
LINE='include "/configs/projectname.conf"'
sed -n "\|$LINE|q;\$a $LINE" lighttpd.conf >> lighttpd.conf
Use the pipe as separator and quit if $LINE has been found. Otherwise, append $LINE at the end.
Since we only read the file in sed command, I suppose we have no clobber issue in general (it depends on your shell settings).
Using only sed I'd suggest the following solution:
sed -i \
-e 's#^include "/configs/projectname.conf"#include "/configs/projectname.conf"#' \
-e t \
-e '$ainclude "/configs/projectname.conf"' lighttpd.conf
s replace the line include "/configs/projectname.conf with itself (using # as delimiter here)
t if the replacement was successful skip the rest of the commands
$a otherwise jump to the last line and append include "/configs/projectname.conf after it
Almost all of the answers work but not in all scenarios or OS as per my experience. Only thing that worked on older systems and new and different flavours of OS is the following.
I needed to append KUBECONFIG path to bashrc file if it doesnt exist. So, what I did is
I assume that it exists and delete it.
with sed I append the string I want.
sed -i '/KUBECONFIG=/d' ~/.bashrc
echo 'export KUBECONFIG=/etc/rancher/rke2/rke2.yaml' >> ~/.bashrc
I needed to edit a file with restricted write permissions so needed sudo. working from ghostdog74's answer and using a temp file:
awk 'FNR==NR && /configs.*projectname\.conf/{f=1;next}f==0;END{ if(!f) { print "your line"}} ' file > /tmp/file
sudo mv /tmp/file file
I have a file as below:
line1
line2
line3
And I want to get:
prefixline1
prefixline2
prefixline3
I could write a Ruby script, but it is better if I do not need to.
prefix will contain /. It is a path, /opt/workdir/ for example.
# If you want to edit the file in-place
sed -i -e 's/^/prefix/' file
# If you want to create a new file
sed -e 's/^/prefix/' file > file.new
If prefix contains /, you can use any other character not in prefix, or
escape the /, so the sed command becomes
's#^#/opt/workdir#'
# or
's/^/\/opt\/workdir/'
awk '$0="prefix"$0' file > new_file
In awk the default action is '{print $0}' (i.e. print the whole line), so the above is equivalent to:
awk '{print "prefix"$0}' file > new_file
With Perl (in place replacement):
perl -pi 's/^/prefix/' file
You can use Vim in Ex mode:
ex -sc '%s/^/prefix/|x' file
% select all lines
s replace
x save and close
If your prefix is a bit complicated, just put it in a variable:
prefix=path/to/file/
Then, you pass that variable and let awk deal with it:
awk -v prefix="$prefix" '{print prefix $0}' input_file.txt
Here is a hightly readable oneliner solution using the ts command from moreutils
$ cat file | ts prefix | tr -d ' '
And how it's derived step by step:
# Step 0. create the file
$ cat file
line1
line2
line3
# Step 1. add prefix to the beginning of each line
$ cat file | ts prefix
prefix line1
prefix line2
prefix line3
# Step 2. remove spaces in the middle
$ cat file | ts prefix | tr -d ' '
prefixline1
prefixline2
prefixline3
If you have Perl:
perl -pe 's/^/PREFIX/' input.file
Using & (the whole part of the input that was matched by the pattern”):
cat in.txt | sed -e "s/.*/prefix&/" > out.txt
OR using back references:
cat in.txt | sed -e "s/\(.*\)/prefix\1/" > out.txt
Using the shell:
#!/bin/bash
prefix="something"
file="file"
while read -r line
do
echo "${prefix}$line"
done <$file > newfile
mv newfile $file
While I don't think pierr had this concern, I needed a solution that would not delay output from the live "tail" of a file, since I wanted to monitor several alert logs simultaneously, prefixing each line with the name of its respective log.
Unfortunately, sed, cut, etc. introduced too much buffering and kept me from seeing the most current lines. Steven Penny's suggestion to use the -s option of nl was intriguing, and testing proved that it did not introduce the unwanted buffering that concerned me.
There were a couple of problems with using nl, though, related to the desire to strip out the unwanted line numbers (even if you don't care about the aesthetics of it, there may be cases where using the extra columns would be undesirable). First, using "cut" to strip out the numbers re-introduces the buffering problem, so it wrecks the solution. Second, using "-w1" doesn't help, since this does NOT restrict the line number to a single column - it just gets wider as more digits are needed.
It isn't pretty if you want to capture this elsewhere, but since that's exactly what I didn't need to do (everything was being written to log files already, I just wanted to watch several at once in real time), the best way to lose the line numbers and have only my prefix was to start the -s string with a carriage return (CR or ^M or Ctrl-M). So for example:
#!/bin/ksh
# Monitor the widget, framas, and dweezil
# log files until the operator hits <enter>
# to end monitoring.
PGRP=$$
for LOGFILE in widget framas dweezil
do
(
tail -f $LOGFILE 2>&1 |
nl -s"^M${LOGFILE}> "
) &
sleep 1
done
read KILLEM
kill -- -${PGRP}
Using ed:
ed infile <<'EOE'
,s/^/prefix/
wq
EOE
This substitutes, for each line (,), the beginning of the line (^) with prefix. wq saves and exits.
If the replacement string contains a slash, we can use a different delimiter for s instead:
ed infile <<'EOE'
,s#^#/opt/workdir/#
wq
EOE
I've quoted the here-doc delimiter EOE ("end of ed") to prevent parameter expansion. In this example, it would work unquoted as well, but it's good practice to prevent surprises if you ever have a $ in your ed script.
Here's a wrapped up example using the sed approach from this answer:
$ cat /path/to/some/file | prefix_lines "WOW: "
WOW: some text
WOW: another line
WOW: more text
prefix_lines
function show_help()
{
IT=$(CAT <<EOF
Usage: PREFIX {FILE}
e.g.
cat /path/to/file | prefix_lines "WOW: "
WOW: some text
WOW: another line
WOW: more text
)
echo "$IT"
exit
}
# Require a prefix
if [ -z "$1" ]
then
show_help
fi
# Check if input is from stdin or a file
FILE=$2
if [ -z "$2" ]
then
# If no stdin exists
if [ -t 0 ]; then
show_help
fi
FILE=/dev/stdin
fi
# Now prefix the output
PREFIX=$1
sed -e "s/^/$PREFIX/" $FILE
You can also achieve this using the backreference technique
sed -i.bak 's/\(.*\)/prefix\1/' foo.txt
You can also use with awk like this
awk '{print "prefix"$0}' foo.txt > tmp && mv tmp foo.txt
Using Pythonize (pz):
pz '"preix"+s' <filename
Simple solution using a for loop on the command line with bash:
for i in $(cat yourfile.txt); do echo "prefix$i"; done
Save the output to a file:
for i in $(cat yourfile.txt); do echo "prefix$i"; done > yourfilewithprefixes.txt
You can do it using AWK
echo example| awk '{print "prefix"$0}'
or
awk '{print "prefix"$0}' file.txt > output.txt
For suffix: awk '{print $0"suffix"}'
For prefix and suffix: awk '{print "prefix"$0"suffix"}'
For people on BSD/OSX systems there's utility called lam, short for laminate. lam -s prefix file will do what you want. I use it in pipelines, eg:
find -type f -exec lam -s "{}: " "{}" \; | fzf
...which will find all files, exec lam on each of them, giving each file a prefix of its own filename. (And pump the output to fzf for searching.)
If you need to prepend a text at the beginning of each line that has a certain string, try following. In the following example, I am adding # at the beginning of each line that has the word "rock" in it.
sed -i -e 's/^.*rock.*/#&/' file_name
SETLOCAL ENABLEDELAYEDEXPANSION
YourPrefix=blabla
YourPath=C:\path
for /f "tokens=*" %%a in (!YourPath!\longfile.csv) do (echo !YourPrefix!%%a) >> !YourPath!\Archive\output.csv