I'm learning to use the open source version of OpenShift. I have downloaded the linux image and started it on a virtual machine (named VM1) on my PC, which runs Windows 7. On another VM (named VM2) I have installed another linux OS and configured the JBoss IDE to work with OpenShift. Then I have successfully created and hosted an app on my local OpenShift PaaS cloud. Here is where the problem starts:
On VM2 (the one running linux where I developed the app) I have no problem accessing my account webpage on OpenShift, viewing what apps I have created and testing them.
From any other PC on my network I can log in to the OpenShift web console and view my apps by simply entering the IP of VM1 (in my case 192.168.1.107). There I can see the URL to launch my app: http://localtest2-mydomain.openshift.local/ . But when I click on it, I get a message saying that the web page is not available. Again, if I use this link in VM2, it works like a charm.
I tried changing the system32\drivers\etc\hosts file so that and link ending in openshift.local will be sent to the IP address of VM1, but it doesn't work. Can anyone help me?
As far as I know, you can not use wildcards in your hosts file, you would need to specify the entire url in your hosts file for it to find it correctly. Give that a try and see if it helps.
Related
I am new to Maximo 7.6.1 installation. Have installed DB2, WAS 11.01 and Maximo 7.6.1 . All of them on the same personal laptop running Windows 10.
Installations successful (except for the final ear deployment). DB2 and WAS are successfully installed. On rebooting the laptop, I get following different logins db2admin,
maximo ,
maxdb76
My question is using which url I can access/ or get the login page of Maximo.
Try modifying this url based on your setup.
You may need to specify a port after hostname (e.g. :9080) if one is configured and specifying localhost or your IP address (found by running ipconfig from the command line) can help rule out any issues with hostname.
You said, "except for the final ear deployment" ... but it is that final EAR deployment that makes Maximo run when you start the app server you deploy it to. Once it is deployed and running, you should be able to access the Maximo login page by browsing to http://localhost:9080/maximo or https://localhost:9443/maximo.
I recently configured and hardened an installation of ColdFusion 2016 + IIS 8 in preparation for a upgrade from CF9. I was able to load all of our web, configure our data sources, and get everything pointed in the right direction. I was able to test that this server was working as expected so we created an image of this machine and loaded it onto another server. We put the cloned machine on it's own IP and gave it it's own domain name in IIS. So here's the problem, the ColdFusion admin pages doesn't work. It works on the original machine, and most of our web apps work on the cloned machine. There are some web apps acting up on the clone machine, but I believe I can solve that issue if I could just get to the CF Administrator page. Currently when we try to reach it at thissite.xyz:8500/CFIDE/administrator we get a blank white page. I created a virtual directory for it in IIS and get the same results.
I have Microsoft Windows server 2008 R2 and have the IIS 7 running.
I have coded a web application on a seperate laptop and would like to publish it now on my server (serves as AD, DNS, File Server, IIS) that runs locally and has no external access. We will be using the application internally only.
I have followed the steps to install a website on IIS, however, it does not work. Below are the steps I have done.
Created a folder hierarchy and pasted the code files there. (check below image. The code files are inside wwwroot)
Create a new website from the IIS Manager as the below image.
The wwwroot folder has SYSTEM permission and it inherits the permissions from the parent. (Does it need to have other permissions?!?)
Whenever I visit the website, I get an error that the page is not found.
UPDATE
Upon #Ravi A's answer below, I have tried his steps as the below image, but the username is not found and the error persists.
Any ideas what is wrong?
windows iis website
You need to add a binding in your DNS i.e. ping mysite.local should resolve to the server IP, in your case since it's a intranet it should resolve to 192.168.1.253.
See here on how to do it. You need access to DNS Manager.
Also since you are not clear on DNS mapping leave the hostname empty and use machine name or IP to browse the site.
I've got a VirtualBox VM running Windows Server 2008 R2. The server is configured as a domain controller.
I've got source code on my web application on the host machine. I shared a folder to the guest VM that contains the source code. I configured an IIS application on the Guest machine and pointed it to the share (\VBOXSVR\code).
When I run the application, I get the following message:
Module: IIS Web Core
Notification: BeginRequest
Handler: Not yet determined
Error Code: 0x80070001
Config Error: Cannot read configuration file
Config File: \?\UNC\VBOXSVR\code\web.config
I've verified that the user account the app pool is running under can access the Share. Any ideas on how to fix this?
I had a very similar issue when setting up a vagrant box for Windows 2012 R2 with IIS for development purposes. From what I remember I was able to use the following as a workaround, but not something I would want to implement in a production environment:
Make C:\vagrant a network share and set the permissions to be
accessible by the user running IIS \\localhost\vagrant.
Set the webroot for site to be the network share \\localhost\vagrant
In theory the following may work for your situation:
Create a symlink to the network share, IE: mklink /j "\\VBOXSVR\code" C:\code\
Make C:\code a network share accessible by IIS, \\localhost\code
Make sure the user running IIS will have permissions to the network share
Set the webroot for the site in IIS to the network share, \\localhost\code
(Optional) I added an entry into the host file (C:\Windows\System32\drivers\etc\host) for localhost. This appeared to improve performance, but it should not be necessary.
Hopefully this will point you in the right direction.
There seems to be an issue with the way Virtualbox shares the folders between Host and Guest. As I discovered when doing this with a Vagrant setup, if you manually create a UNC share on the Host, connect to that share on the Guest and point IIS at it things go along smoothly.
Note that if you are using Application Pools you should ensure the user assigned to the pool can access the share.
If you want to see what a couple of Powershell scripts looks like to automate the process, take a look in the scripts dir of https://github.com/mefellows/vagrant-smb-plugin.
Alternatively, you could use the rsync synced-folder type which has the advantage of much better performance. You could create a local Windows VM with Packer (example templates).
After spending a couple of hours on this issue I finally managed to make it work. Configure your application pool identity to Guest user. If you do this everything will work as expected.
I have a setup in which the host os has the code and a virtualbox vm with IIS configured served that code from a shared folder (vbox shared folder). Everything works as expected.
I am completely new bie to IIS.
I have a very basic knowledge about how to configure IIS.
Today I have a requirement to access website Globally through WAN (through internet from any PC all over world) which I have deployed in my Local IIS.
The website=> SilverLightBusinessApplicationWeb
which you can see in my below screen shot can be open in LAN nicely.
so I only looking for how to open it in WAN?
So anybody please suggest me a simple steps or instruction for it.
You can see two screen shot of Internet Information Service (IIS) Manager.
NOTE: 1. I also have static IP 2. i am using IIS7.0 with Windows-7
Thank you so much…..
1. Screen Shot1
2. Screen Shot2
This question is probably better off on ServerFault. However, providing you have everything set up on your machine, you just need to open and forward port 80 to your host machine and set up a domain or access the site directly via external IP providing your bindings are set up correctly.
EDIT From a security point of view, it would be better practice to do as Germann said by having your public facing web server in its own DMZ.
Finally i have got it........
the steps i have followed are......
define port forwarding at router for that i have enter following values in my router's forwarding page.
--IP address of my PC
--port number which is open(you can see screen shot Brouse*:80(http) which shows port 80
is open for website on my IIS.
finally i have opened website on my IIS by : .http://mystaticip:port/xyzfolder/xyz.html.