Now I want to design a simple game by using python, the step I want to do is to add an icon on the left of the window.
However, when I type
game_window.iconbitmap('favicon.ico')
game_window.mainloop()
the system just tell me Document Drag Error.
I am sure I save favicon and the both in the desktop and both of the path is correct.
I search this question in the internet but all of them are using window os.
If your icon is in the same folder as your file, the script will surely work...
I think that you're getting the error because you didn't save the file you're working on for the first time.
Try the following:
Save your file in the same folder another time (if you've already done it).
If it doesn't work, then write the full path of the icon
I am navigating the code of a big JavaScript library using Sublime Text 3. So I need to open a lot of tabs and switch between them to capture the code co-reference. However, Sublime closes 'unused' tabs automatically for me.
How to disable it? I googled but cannot find a solution. I find a shortcut ctrl+shift+t to restore the most recent closed file, but that is not enough. I need to disable the automatic closing, and that would be better if someone shows me the short key to "display and select a file from all open files". Thanks.
When you single-click on a file in the sidebar, Sublime displays it in a "temp" view that is overwritten the next time you single-click on a file. To open a file in a "permanent" tab that stays open even when other files are opened, you simply need to double-click on the file in the sidebar.
A more direct solution that I find mildly preferable, at least until I can retrain myself to double-click when I want a tab to stay open:
In the Settings, set preview_on_click to false.
This is not quite what I want since it all it does is disable the behavior to open a preview tab on single click -- thereby forcing the user to always double click. But perhaps by working this way for a week or so I will be able to retrain my ingrained assumptions and can go back to the default behavior.
Double click that file on left sidebar you do not want to close automatically.
I didnt change any file paths and everything was working fine. I made one quick change saved it ok, did another change and I went to save it and got the following error. How can I solve this. It will save other files ok
Unable to save
D:\xampp\htdocs\websites\dev.liverpool\style\main.scss
Error:
MoveFileEx(D:\xampp\htdocs\websites\dev.liverpool\style\.sublae1.tmp, D:\xampp\htdocs\websites\dev.liverpoolzstylezmain.scss) failed,
Access is denied.
seems it's because Windows or another program is blocking the file. Sublime text uses a temporal file instead of editing the file directly, and when you save the file uses a API command to move this edited file to the original, so this command has restrictions when one file is locked and Sublime shows this alert.
Maybe this setting {"atomic_save": false} will work for you.
Go to the path where you installed sublime text 2 and...
Right click on the sublime_text 2.exe file.
Go to its properties.
Go to compatibility section under this.
Set its privilege level to "Run this program as an administrator".
Now change settings for all users and there also check the field "Run this program as an administrator".
Apply the changes.
I just solved the same issue on Sublime Text 3 beta, Stable Channel Build 3065 by doing the following under Windows 7:
Navigate to the Sublime Text 3 executable file, wherever you have it installed.
Right-click it and select properties.
Click on the tab marked "Security"
About half way down the tab, on the right hand side, under the list of group and user names is this little button:
Click it.
If your machine is setup the way I suspect it is (otherwise you probably would not be having this issue), you should be prompted for your administrator account credentials. Enter them.
Now, select the Users group in the list, then take a look in the box at the bottom labeled 'Permissions for Users'. Put a check mark in the 'Allow' column for the 'Write' item.
Click 'Apply'
Click 'OK'
You should be set. What this does is it essentially gives Sublime the ability to write files while running with regular user privileges, no administrator level access required. Upon taking a better look at your error, what is happening is Sublime Text is creating a temp file for editing, rather than editing to file itself, then attempting to overwrite the original file with the temp on save. The problem is that the program is not being run by a user with sufficient privileges to perform the overwrite, hence the failure with an 'Access denied' message.
A simple and effective solution: Right-click on the file you want to save, in my case it is index.html, go to the properties and uncheck read-only.
The Sublime text will start working fine.
I have come across this error quite many times and by un-checking read-only file attribute of index.html, I am able to get rid of it
I found out more ways to fix this:
Close and reopen the Sublime Text windows or
Open the file with Np++, add a space, save, quit, then you're prompted by ST to reload the file, click yes, and it works again... or
Open the FTP console to see if there's a transaction in progress - then cancel it
In my case the SFTP plugin seems to be causing this problem, as when the FTP connection is timed out, the file which is waiting to be uploaded is being used, and you try to overwrite it.
This happens because you're using ScoutApp or Compass, they block your SCSS files because they are checking for changes as you specified for a directory for those files.
I suggest you reading this:
http://aspirecode.com/how-to-add-sass-support-in-sublime-text/
Good luck!
On mac using a remote volume sometimes I experience this. The solution is to remove the temp file then save again and all fixed.
IE: if you are working on test.html then the temp file would be ._test.html
Remove ._test.html then save again.
For Mac-
Try changing the destination from 'Macintosh HD' to 'Documents' or any other folder.
Worked for me.
The plugin of Superlime solved this problem. It tries to save the file as root in SublimeText.
Reference Link: https://github.com/azubr/Superlime
Try switching your SublimeText process priority to higher level in process manager (it has to have higher priority than your scss compiling app, if you're using one).
It seems to have worked for me.
if it's not working after doing all suggestions, reinstall the program
On Mac I saved the file in Home directory and it gave me this alert, later when I re saved the file again this time in Document directory the file is working now. Using SublimeText 3.
I found this occurred when the folders are read-only. Right-click on the folders where your site is contained and see if read-only is selected in the properties.
Just open it as an administrator.
Because I want to edit anything and write as admin all the time, I set this program to always open as an administrator using "Configure Applications to Always Run as an Administrator".
Just got your file folder properties which you want to save and deselect to read only attribute.
What shortcuts do you use for file navigation in Gedit? Does anyone use the file browser?
I thought that these shortcuts would exist, but I can't find anything about them:
switch focus to/from the file browser.
disclose folder contents. (Most applications use up/down arrows for moving up and down, and the right/left arrows to open/disclose the folders.)
Do these exist?
Thanks,
Loren
I'm going to assume at this point that no one knows of these. (The only semi-useful shortcut I have found is F9, which simply shows/hides the file browser.)
Even the official shortcut list doesn't show anything regarding these two features:
http://live.gnome.org/Gedit/KeyboardShortcuts
For now, I'll submit this as a bug. Please let me know if this changes, so I can inform the dev team.
Loren
The shortcuts for the embedded file browser are pretty much the same as the file manager ones:
Enter - open directory
Backspace - go back
Alt+Up - go up one level
Up and Down arrows - navigate directory contents
As to how to switch focus to/from the file browser, I have added an answer here.
Kind of a newbie question.
Sometimes I use the project-wide search feature, and my search results appear listed in the window below, along with the related hierarchy placement.
Let's say I double click a file. It opens. Fine.
However, if I double-click again on another file in the search results window, it will replace the file I just opened. It's impossible for me to open multiple search results, short of manually opening them from the project view.
It wasn't always this way - it worked when I first installed the program, but something changed about three days in and I can't do it anymore.
Thanks!
Go to Preferences > General > Search and uncheck Reuse editors to show matches.