I have a large text file that I would like to divide into segments and use sed to delete certain patterns in place. I would like to do this in a single command line using a pipe. For example:
sed -n 1,10p <text file> | sed -i 's/<pattern to remove>//'
The code above attempts to take the first 10 lines of the text file and remove the patterns from the 10 lines in place. The resulting text file should have the first 10 lines modified. The code above doesn't work because the second command after the pipe requires a input file. Please help!
Something like
sed -i '1,10s/pattern//' foo.txt
though for in place editing of a file I prefer ed or perl instead of relying on a non standard sed extension like -i.
This seems to do what you're asking ....
sed -ni '1,10s/pattern//p' file
When there is a program which, upon execution, prints several lines on stout, how can I redirect all those lines to sed and perform some operations on them while they are being generated?
For example:
7zip a -t7z output_folder input_folder -mx9 > sed 's/.*[ \t][ \t]*\([0-9][0-9]*\)%.*/\1/'
7zip generates a series of lines as output, each including a percentage value, and I would like sed to display these values only, while they are being generated. The above script unfortunately does not work...
What is the best way to do this?
You should use the pipe | instead of redirection > so that sed uses first command output as its input.
The above script line must have created a sed file in the current directory.
Furthermore, maybe 7zip outputs these lines to stderr instead of stdout. If it is the case, first redirect standard error to standard output before piping: 2>&1 |
I have a text file which has a particular line something like
sometext sometext sometext TEXT_TO_BE_REPLACED sometext sometext sometext
I need to replace the whole line above with
This line is removed by the admin.
The search keyword is TEXT_TO_BE_REPLACED
I need to write a shell script for this. How can I achieve this using sed?
You can use the change command to replace the entire line, and the -i flag to make the changes in-place. For example, using GNU sed:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
You need to use wildcards (.*) before and after to replace the whole line:
sed 's/.*TEXT_TO_BE_REPLACED.*/This line is removed by the admin./'
The Answer above:
sed -i '/TEXT_TO_BE_REPLACED/c\This line is removed by the admin.' /tmp/foo
Works fine if the replacement string/line is not a variable.
The issue is that on Redhat 5 the \ after the c escapes the $. A double \\ did not work either (at least on Redhat 5).
Through hit and trial, I discovered that the \ after the c is redundant if your replacement string/line is only a single line. So I did not use \ after the c, used a variable as a single replacement line and it was joy.
The code would look something like:
sed -i "/TEXT_TO_BE_REPLACED/c $REPLACEMENT_TEXT_STRING" /tmp/foo
Note the use of double quotes instead of single quotes.
The accepted answer did not work for me for several reasons:
my version of sed does not like -i with a zero length extension
the syntax of the c\ command is weird and I couldn't get it to work
I didn't realize some of my issues are coming from unescaped slashes
So here is the solution I came up with which I think should work for most cases:
function escape_slashes {
sed 's/\//\\\//g'
}
function change_line {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | escape_slashes)
# FIX: No space after the option i.
sed -i.bak '/'"${OLD_LINE_PATTERN}"'/s/.*/'"${NEW}"'/' "${FILE}"
mv "${FILE}.bak" /tmp/
}
So the sample usage to fix the problem posed:
change_line "TEXT_TO_BE_REPLACED" "This line is removed by the admin." yourFile
All of the answers provided so far assume that you know something about the text to be replaced which makes sense, since that's what the OP asked. I'm providing an answer that assumes you know nothing about the text to be replaced and that there may be a separate line in the file with the same or similar content that you do not want to be replaced. Furthermore, I'm assuming you know the line number of the line to be replaced.
The following examples demonstrate the removing or changing of text by specific line numbers:
# replace line 17 with some replacement text and make changes in file (-i switch)
# the "-i" switch indicates that we want to change the file. Leave it out if you'd
# just like to see the potential changes output to the terminal window.
# "17s" indicates that we're searching line 17
# ".*" indicates that we want to change the text of the entire line
# "REPLACEMENT-TEXT" is the new text to put on that line
# "PATH-TO-FILE" tells us what file to operate on
sed -i '17s/.*/REPLACEMENT-TEXT/' PATH-TO-FILE
# replace specific text on line 3
sed -i '3s/TEXT-TO-REPLACE/REPLACEMENT-TEXT/'
for manipulation of config files
i came up with this solution inspired by skensell answer
configLine [searchPattern] [replaceLine] [filePath]
it will:
create the file if not exists
replace the whole line (all lines) where searchPattern matched
add replaceLine on the end of the file if pattern was not found
Function:
function configLine {
local OLD_LINE_PATTERN=$1; shift
local NEW_LINE=$1; shift
local FILE=$1
local NEW=$(echo "${NEW_LINE}" | sed 's/\//\\\//g')
touch "${FILE}"
sed -i '/'"${OLD_LINE_PATTERN}"'/{s/.*/'"${NEW}"'/;h};${x;/./{x;q100};x}' "${FILE}"
if [[ $? -ne 100 ]] && [[ ${NEW_LINE} != '' ]]
then
echo "${NEW_LINE}" >> "${FILE}"
fi
}
the crazy exit status magic comes from https://stackoverflow.com/a/12145797/1262663
In my makefile I use this:
#sed -i '/.*Revision:.*/c\'"`svn info -R main.cpp | awk '/^Rev/'`"'' README.md
PS: DO NOT forget that the -i changes actually the text in the file... so if the pattern you defined as "Revision" will change, you will also change the pattern to replace.
Example output:
Abc-Project written by John Doe
Revision: 1190
So if you set the pattern "Revision: 1190" it's obviously not the same as you defined them as "Revision:" only...
bash-4.1$ new_db_host="DB_HOSTNAME=good replaced with 122.334.567.90"
bash-4.1$
bash-4.1$ sed -i "/DB_HOST/c $new_db_host" test4sed
vim test4sed
'
'
'
DB_HOSTNAME=good replaced with 122.334.567.90
'
it works fine
To do this without relying on any GNUisms such as -i without a parameter or c without a linebreak:
sed '/TEXT_TO_BE_REPLACED/c\
This line is removed by the admin.
' infile > tmpfile && mv tmpfile infile
In this (POSIX compliant) form of the command
c\
text
text can consist of one or multiple lines, and linebreaks that should become part of the replacement have to be escaped:
c\
line1\
line2
s/x/y/
where s/x/y/ is a new sed command after the pattern space has been replaced by the two lines
line1
line2
cat find_replace | while read pattern replacement ; do
sed -i "/${pattern}/c ${replacement}" file
done
find_replace file contains 2 columns, c1 with pattern to match, c2 with replacement, the sed loop replaces each line conatining one of the pattern of variable 1
To replace whole line containing a specified string with the content of that line
Text file:
Row: 0 last_time_contacted=0, display_name=Mozart, _id=100, phonebook_bucket_alt=2
Row: 1 last_time_contacted=0, display_name=Bach, _id=101, phonebook_bucket_alt=2
Single string:
$ sed 's/.* display_name=\([[:alpha:]]\+\).*/\1/'
output:
100
101
Multiple strings delimited by white-space:
$ sed 's/.* display_name=\([[:alpha:]]\+\).* _id=\([[:digit:]]\+\).*/\1 \2/'
output:
Mozart 100
Bach 101
Adjust regex to meet your needs
[:alpha] and [:digit:]
are Character Classes and Bracket Expressions
This worked for me:
sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
An example is:
sed -i .bak -e '7s/.*version.*/ version = "4.33.0"/'
-i: The extension for the backup file after the replacement. In this case, it is .bak.
-e: The sed script. In this case, it is '7s/.*version.*/ version = "4.33.0"/'. If you want to use a sed file use the -f flag
s: The line number in the file to be replaced. In this case, it is 7s which means line 7.
Note:
If you want to do a recursive find and replace with sed then you can grep to the beginning of the command:
grep -rl --exclude-dir=<directory-to-exclude> --include=\*<Files to include> "<Line to be replaced>" ./ | sed -i <extension> 's/.*<Line to be replaced>.*/<New line to be added>/'
The question asks for solutions using sed, but if that's not a hard requirement then there is another option which might be a wiser choice.
The accepted answer suggests sed -i and describes it as replacing the file in-place, but -i doesn't really do that and instead does the equivalent of sed pattern file > tmp; mv tmp file, preserving ownership and modes. This is not ideal in many circumstances. In general I do not recommend running sed -i non-interactively as part of an automatic process--it's like setting a bomb with a fuse of an unknown length. Sooner or later it will blow up on someone.
To actually edit a file "in place" and replace a line matching a pattern with some other content you would be well served to use an actual text editor. This is how it's done with ed, the standard text editor.
printf '%s\n' '/TEXT_TO_BE_REPLACED/' d i 'This line is removed by the admin' . w q | \
ed -s /tmp/foo > /dev/null
Note that this only replaces the first matching line, which is what the question implied was wanted. This is a material difference from most of the other answers.
That disadvantage aside, there are some advantages to using ed over sed:
You can replace the match with one or multiple lines without any extra effort.
The replacement text can be arbitrarily complex without needing any escaping to protect it.
Most importantly, the original file is opened, modified, and saved. A copy is not made.
How it works
How it works:
printf will use its first argument as a format string and print each of its other arguments using that format, effectively meaning that each argument to printf becomes a line of output, which is all sent to ed on stdin.
The first line is a regex pattern match which causes ed to move its notion of "the current line" forward to the first line that matches (if there is no match the current line is set to the last line of the file).
The next is the d command which instructs ed to delete the entire current line.
After that is the i command which puts ed into insert mode;
after that all subsequent lines entered are written to the current line (or additional lines if there are any embedded newlines). This means you can expand a variable (e.g. "$foo") containing multiple lines here and it will insert all of them.
Insert mode ends when ed sees a line consisting of .
The w command writes the content of the file to disk, and
the q command quits.
The ed command is given the -s switch, putting it into silent mode so it doesn't echo any information as it runs,
the file to be edited is given as an argument to ed,
and, finally, stdout is thrown away to prevent the line matching the regex from being printed.
Some Unix-like systems may (inappropriately) ship without an ed installed, but may still ship with an ex; if so you can simply use it instead. If have vim but no ex or ed you can use vim -e instead. If you have only standard vi but no ex or ed, complain to your sysadmin.
It is as similar to above one..
sed 's/[A-Za-z0-9]*TEXT_TO_BE_REPLACED.[A-Za-z0-9]*/This line is removed by the admin./'
Below command is working for me. Which is working with variables
sed -i "/\<$E\>/c $D" "$B"
I very often use regex to extract data from files I just used that to replace the literal quote \" with // nothing :-)
cat file.csv | egrep '^\"([0-9]{1,3}\.[0-9]{1,3}\.)' | sed s/\"//g | cut -d, -f1 > list.txt
I am using bash with linux to accomplish adding content to the top of a file.
Thus far i know that i am able to get this done by using a temporary file. so
i am doing it this way:
tac lines.bar > lines.foo
echo "a" >> lines.foo
tac lines.foo > lines.bar
But is there a better way of doing this without having to write a second file?
echo a | cat - file1 > file2
same as shellter's
and sed in one line.
sed -i -e '1 i<whatever>' file1
this will insert to file1 inplace.
the sed example i referred to
tac is very 'expensive' solution, especially as you need to use it 2x. While you still need to use a tmp file, this will take less time:
edit per notes from KeithThompson, now using '.$$' filename and condtional /bin/mv.
{
echo "a"
cat file1
} > file1.$$ && /bin/mv file1.$$ file1
I hope this helps
Using a named pipe and in place replacement with sed, you could add the output of a command at the top of a file without explicitly needing a temporary file:
mkfifo output
your_command >> output &
sed -i -e '1x' -e '1routput' -e '1d' -e '2{H;x}' file
rm output
What this does is buffering the output of your_command in a named pipe (fifo), and inserts in place this output using the r command of sed. For that, you need to start your_command in the background to avoid blocking on output in the fifo.
Note that the r command output the file at the end of the cycle, so we need to buffer the 1st line of file in the hold space, outputting it with the 2nd line.
I write without explicitly needing a temporary file as sed might use one for itself.
How can we append text in a file via a one-line command without using io redirection?
If you don't mind using sed then,
$ cat test
this is line 1
$ sed -i '$ a\this is line 2 without redirection' test
$ cat test
this is line 1
this is line 2 without redirection
As the documentation may be a bit long to go through, some explanations :
-i means an inplace transformation, so all changes will occur in the file you specify
$ is used to specify the last line
a means append a line after
\ is simply used as a delimiter
If you just want to tack something on by hand, then the sed answer will work for you. If instead the text is in file(s) (say file1.txt and file2.txt):
Using Perl:
perl -e 'open(OUT, ">>", "outfile.txt"); print OUT while (<>);' file*.txt
N.B. while the >> may look like an indication of redirection, it is just the file open mode, in this case "append".
You can use the --append feature of tee:
cat file01.txt | tee --append bothFiles.txt
cat file02.txt | tee --append bothFiles.txt
Or shorter,
cat file01.txt file02.txt | tee --append bothFiles.txt
I assume the request for no redirection (>>) comes from the need to use this in xargs or similar. So if that doesn't count, you can mute the output with >/dev/null.
You can use Vim in Ex mode:
ex -sc 'a|BRAVO' -cx file
a append text
x save and close
On Linux/GNU systems, the simplest and cleanest solution is:
dd of=oldfile oflag=append conv=notrunc
Simple and clean, because no quoting or backslashitis is required.
Unfortunately, this also doesn't work on BSD (and so, on Darwin), because their dd has no oflag . Argh! Can anyone suggest how to do it with the BSD dd ?