Related
While reading up on SQLite, I stumbled upon this quote in the FAQ: "Threads are evil. Avoid them."
I have a lot of respect for SQLite, so I couldn't just disregard this. I got thinking what else I could, according to the "avoid them" policy, use instead in order to parallelize my tasks. As an example, the application I'm currently working on requires a user interface that is always responsive, and needs to poll several websites from time to time (a process which takes at least 30 seconds for each website).
So I opened up the PDF linked from that FAQ, and essentially it seems that the paper suggests several techniques to be applied together with threads, such as barriers or transactional memory - rather than any techniques to replace threads altogether.
Given that these techniques do not fully dispense with threads (unless I misunderstood what the paper is saying), I can see two options: either the SQLite FAQ does not literally mean what it says, or there exist practical approaches that actually avoid the use of threads altogether. Are there any?
Just a quick note on tasklets/cooperative scheduling as an alternative - this looks great in small examples, but I wonder whether a large-ish UI-heavy application can be practically parallelized in a solely cooperative way. If you have done this successfully or know of such examples this certainly qualifies as a valid answer!
Note: This answer no longer accurately reflects what I think about this subject. I don't like its overly dramatic, somewhat nasty tone. Also, I am not so certain that the quest for provably correct software has been so useless as I seemed to think back then. I am leaving this answer up because it is accepted, and up-voted, and to edit it into something I currently believe would pretty much vandalize it.
I finally got around to reading the paper. Where do I start?
The author is singing an old song, which goes something like this: "If you can't prove the program is correct, we're all doomed!" It sounds best when screamed loudly accompanied by over modulated electric guitars and a rapid drum beat. Academics started singing that song when computer science was in the domain of mathematics, a world where if you don't have a proof, you don't have anything. Even after the first computer science department was cleaved from the mathematics department, they kept singing that song. They are singing that song today, and nobody is listening. Why? Because the rest of us are busy creating useful things, good things out of software that can't be proved correct.
The presence of threads makes it even more difficult to prove a program correct, but who cares? Even without threads, only the most trivial of programs can be proved correct. Why do I care if my non-trivial program, which could not be proved correct, is even more unprovable after I use threading? I don't.
If you weren't sure the author was living in an academic dreamworld, you can be sure of it after he maintains that the coordination language he suggests as an alternative to threads could best be expressed with a "visual syntax" (drawing graphs on the screen). I've never heard that suggestion before, except every year of my career. A language that can only be manipulated by GUI and does not play with any of the programmer's usual tools is not an improvement. The author goes on to cite UML as a shining example of a visual syntax which is "routinely combined with C++ and Java." Routinely in what world?
In the mean time, I and many other programmers go on using threads without all that much trouble. How to use threads well and safely is pretty much a solved problem, as long as you don't get all hung up on provability.
Look. Threading is a big kid's toy, and you do need to know some theory and usage patterns to use them well. Just as with databases, distributed processing, or any of the other beyond-grade-school devices that programmers successfully use every day. But just because you can't prove it correct doesn't mean it's wrong.
The statement in the SQLite FAQ, as I read it, is just a comment on how difficult threading can be to the uninitiated. It is the author's opinion, and it might be a valid one. But saying you should never use threads is throwing the baby out with the bath water, in my opinion. Threads are a tool. Like all tools, they can be used and they can be abused. I can read his paper and be convinced that threads are the devil, but I have used them successfully, without killing kittens.
Keep in mind that SQLite is written to be as lightweight and easy to understand (from a coding standpoint) as possible, so I would imagine that threading is kind of the antithesis to this lightweight approach.
Also, SQLite is not meant to be used in a highly-concurrent environment. If you have one of these, you might be better off working with a more enterprisey database like Postgres.
Evil, but a necessary evil. High level abstractions of threads (Tasks in .NET for example) are becoming more common but for the most part the industry is not trying to find a way to avoid threads, just making it easier to deal with the complexities that come with any kind of concurrent programming.
One trend I've noticed, at least in the Cocoa domain, is help from the framework. Apple has gone to great lengths to help developers with the relatively difficult concept of concurrent programming. Some things I've seen:
Different granularity of threading. Cocoa supports everything from posix threads (low level) to object oriented threading with NSLock and NSThread, to high level parellelism such as NSOperation. Depending on your task, using a high level tool like NSOperation is easier and gets the job done.
Threading behind the scenes via an API. Lots of the UI and animation stuff in cocoa is hidden behind an API. You are responsible for calling an API method and providing an asynchronous callback this executed when the secondary thread completes (for example the end of some animation).
openMP. There are tools like openMP that allow you to provide pragmas that describe to the compiler that some task may be safely parelellized. For example iterating a set of items in an independent way.
It seems like a big push in this industry is to make things simple for the Application developers and leave the gory thread details to the system developers and framework developers. There is a push in academia for formalizing parellel patterns. As mentioned you cant always avoid threading, but there are an increasing number of tools in your arsenal to make it as painless as possible.
If you really want to live without threads, you can, so long as you don't call any functions that can potentially block. This may not be possible.
One alternative is to implement the tasks you would have made into threads as finite state machines. Basically, the task does what it can do immediately, then goes to its next state, waiting for an event, such as input arriving on a file or a timer going off. X Windows, as well as most GUI toolkits, support this style. When something happens, they call a callback, which does what it needs to do and returns. For a FSM, the callback checks to see what state the task is in and what the event is to determine what to do immediately and what the next state will be.
Say you have an app that needs to accept socket connections, and for each connection, parse command lines, execute some code, and return the results. A task would then be what listens to a socket. When select() (or Gtk+, or whatever) tells you the socket has something to read, you read it into a buffer, then check to see if you have enough input buffered to do something. If so, you advance to a "start doing something" state, otherwise you stay in the "reading a line" state. (What you "do" could be multiple states.) When done, your task drops the line from the buffer and goes back to the "reading a line" state. No threads or preemption needed.
This lets you act multithreaded by way of being event-driven. If your state machines are complicated, however, your code can get hard to maintain pretty fast, and you'll need to work up some kind of FSM-management library to separate the grunt work of running the FSM from the code that actually does things.
P.S. Another way to get threads without really using threads is the GNU Pth library. It doesn't do preemption, but it is another option if you really don't want to deal with threads.
Another approach to this may be to use a different concurrency model rather than avoid multithreading altogether (you have to utilize all these CPU cores in parallel somehow).
Take a look at mechanisms used in Clojure (e.g. agents, software transactional memory).
Software Transactional Memory (STM) is a good alternative concurrency control. It scales well with multiple processors and do not have most of the problems of conventional concurrency control mechanisms. It is implemented as part of the Haskell language. It worths giving a try. Although, I do not know how this is applicable in the context of SQLite.
Alternatives to threads:
coroutines
goroutines
mapreduce
workerpool
apple's grand central dispatch+lambdas
openCL
erlang
(interesting to note that half of those technologies were invented or popularised by google.)
Another thing is many web frameworks transparently use multiple threads/processes for handling requests, and usually in such a way that mostly eliminates the problems associated with multithreading (for the user of the framework), or at least makes the threading rather invisible. The web being stateless, the only shared state is session state (which isn't really a problem since by definition, a single session isn't going to be doing concurrent things), and data in a database that already has its multithreading nonsense sorted out for you.
It's somewhat important to note though that these are all abstractions. The underlying implementations of these things still use threads. But this is still incredibly useful. In the same way you wouldn't use assembler to write a web application, you wouldn't use threads directly to write any important application. Designing an application to use threads is too complicated to leave for a human to deal with.
Threading is not the only model of concurrency. The actors model (Erlang, Scala) is an example of a somewhat different approach.
http://www.scala-lang.org/node/242
If your task is really, really easily isolatable, you can use processes instead of threads, like Chrome does for its tabs.
Otherwise, inside a single process, there is no way to achieve real parallelism without threads, because you need at least two coroutines if you want two things to happen at the same time (assuming you're having multiple processors/cores at hand, of course; otherwise real parallelism is simply not possible).
The complexity of threading a program is always relative to the degree of isolation of the tasks the threads will perform. There's no trouble in running several threads if you know for sure these will never use the same variables. Then again, multiple high-level constructs exist in modern languages to help synchronize access to shared resources.
It's really a matter of application. If your task is simple enough to fit in some kind of high-level Task object (depends on your development platform; your mileage may vary), then using a task queue is your best bet. My rule of the thumb is that if you can't find a cool name to your thread, then its task is not important enough to justify a thread (instead of task going on an operation queue).
Threads give you the opportunity to do some evil things, specifically sharing state among different execution paths. But they offer a lot of convenience; you don't have to do expensive communication across process boundaries. Plus, they come with less overhead. So I think they're perfectly fine, used correctly.
I think the key is to share as little data as possible among the threads; just stick to synchronization data. If you try to share more than that, you have to engage in complex code that is hard to get right the first time around.
One method of avoiding threads is multiplexing - in essence you make a lightweight mechanism similar to threads which you manage yourself.
Thing is this is not always viable. In your case the 30s polling time per website - can it be split into 60 0.5s pieces, in between which you can stuff calls to the UI? If not, sorry.
Threads aren't evil, they are just easy to shoot your foot with. If doing Query A takes 30s and then doing Query B takes another 30s, doing them simultaneously in threads will take 120s instead of 60 due to thread overhead, fighting for disk access and various bottlenecks.
But if Operation A consists of 5s of activity and 55 seconds of waiting, mixed randomly, and Operation B takes 60s of actual work, doing them in threads will take maybe 70s, compared to plain 120 when you execute them in sequence.
The rule of thumb is: threads should idle and wait most of the time. They are good for I/O, slow reads, low-priority work and so on. If you want performance, use multiplexing, which requires more work but is faster, more efficient and has way less caveats. (synchronizing threads and avoiding race conditions is a whole different chapter of thread headaches...)
In the future, will managed runtimes provide additional protections against subtle data corruption issues?
Managed runtimes such as Java and the .NET CLR reduce or eliminate the possibility of many memory corruption bugs common in native languages like C#. Nonetheless, they are surprisingly not immune from all memory corruption problems. One intuitively expects that a method that validates its input, has no bugs, and robustly handles exceptions will always transform its object from one valid state to another, but this is not the case. (It is more accurate to say that it is not the case using prevailing programming conventions--object implementors need to go out of their way to avoid the problems I describe.)
Consider the following scenarios:
Threading. The caller might share the object with other threads and make concurrent calls on it. If the object does not implement locking, the fields might be corrupted. (Perhaps--unless notified that the object is thread-safe--runtimes should use an interlock on every method call to throw an exception if any method on the same object executing concurrently on another thread. This would be a protection feature and, just like other well-accepted safety features of managed runtimes, it has some cost.)
Re-entrancy. The method makes a callout to an arbitrary function (such as an event handler) that ultimately calls methods on the object that are not designed to be called at that point. This is even trickier than thread safety and many class libraries do not get this right. (Worse yet, class libraries are known to poorly document what re-entrancy is allowed.)
For all of these cases, it can be argued that thorough documentation is a solution. However, documentation also can prescribe how to allocate and deallocate memory in unmanaged languages. We know from experience (e.g., with memory allocation) that the difference between documentation and language/runtime enforcement is night and day.
What can we expect from languages and runtimes in the future to protect us from these problems and other subtle problems like them?
I think languages and runtimes will keep moving forward, keep abstracting away issues from the developer, and keep making our lives easier and more productive.
Take your example - threading. There are some great new features on the horizon in the .NET world to simplify the threading model we use daily. STM.NET may eventually make shared state much, much safer to handle, for example. The parallel extensions in .NET 4 make life very easy for threading compared to current technologies.
I think that transactional memory is promising for addressing some of these issues. I'm not sure if this answers your question in some way but this is an interesting topic in any event:
http://en.wikipedia.org/wiki/Software_transactional_memory
There was an episode of Software Engineering Radio on the topic a year or so ago maybe.
First of all, "managed" is a bit of a misnomer: languages like OCaml, Haskell, and SML achieve such protections and safety while being fully compiled. All relevant "management" occurs at compile time through static analysis, which aids optimization and speed.
Anyway, to answer your question: if you look at languages like Erlang and Haskell, state is isolated and immutable by default. With kind of system, threading and reentrancy is safe by default, and because you have to go out of your way to break these rules, it is obvious to see where unsafe code can arise.
By starting with safe defaults but leaving room for advanced unsafe usage, you get the best of both worlds. It seems reasonable that future systems that are safe by your definition may follow some of these practices as well.
What can we expect in the future?
Nothing. Thread-state and re-entrancy are not problems I see tools/runtimes solving. Instead I think in the future people will move to styles that avoid programming with mutable state to bypass these issues. Languages and libraries can help make these styles of programming more attractive, but the tools are not the solution - changing the way we write code is the solution.
Many projects I work on have poor threading implementations and I am the sucker who has to track these down. Is there an accepted best way to handle threading. My code is always waiting for an event that never fires.
I'm kinda thinking like a design pattern or something.
(Assuming .NET; similar things would apply for other platforms.)
Well, there are lots of things to consider. I'd advise:
Immutability is great for multi-threading. Functional programming works well concurrently partly due to the emphasis on immutability.
Use locks when you access mutable shared data, both for reads and writes.
Don't try to go lock-free unless you really have to. Locks are expensive, but rarely the bottleneck.
Monitor.Wait should almost always be part of a condition loop, waiting for a condition to become true and waiting again if it's not.
Try to avoid holding locks for longer than you need to.
If you ever need to acquire two locks at once, document the ordering thoroughly and make sure you always use the same order.
Document the thread-safety of your types. Most types don't need to be thread-safe, they just need to not be thread hostile (i.e. "you can use them from multiple threads, but it's your responsibility to take out locks if you want to share them)
Don't access the UI (except in documented thread-safe ways) from a non-UI thread. In Windows Forms, use Control.Invoke/BeginInvoke
That's off the top of my head - I probably think of more if this is useful to you, but I'll stop there in case it's not.
Learning to write multi-threaded programs correctly is extremely difficult and time consuming.
So the first step is: replace the implementation with one that doesn't use multiple threads at all.
Then carefully put threading back in if, and only if, you discover a genuine need for it, when you've figured out some very simple safe ways to do so. A non-threaded implementation that works reliably is far better than a broken threaded implementation.
When you're ready to start, favour designs that use thread-safe queues to transfer work items between threads and take care to ensure that those work items are accessed only by one thread at a time.
Try to avoid just spraying lock blocks around your code in the hope that it will become thread-safe. It doesn't work. Eventually, two code paths will acquire the same locks in a different order, and everything will grind to a halt (once every two weeks, on a customer's server). This is especially likely if you combine threads with firing events, and you hold the lock while you fire the event - the handler may take out another lock, and now you have a pair of locks held in a particular order. What if they're taken out in the opposite order in some other situation?
In short, this is such a big and difficult subject that I think it is potentially misleading to give a few pointers in a short answer and say "Off you go!" - I'm sure that's not the intention of the many learned people giving answers here, but that is the impression many get from summarised advice.
Instead, buy this book.
Here is a very nicely worded summary from this site:
Multithreading also comes with
disadvantages. The biggest is that it
can lead to vastly more complex
programs. Having multiple threads does
not in itself create complexity; it's
the interaction between the threads
that creates complexity. This applies
whether or not the interaction is
intentional, and can result long
development cycles, as well as an
ongoing susceptibility to intermittent
and non-reproducable bugs. For this
reason, it pays to keep such
interaction in a multi-threaded design
simple – or not use multithreading at
all – unless you have a peculiar
penchant for re-writing and debugging!
Perfect summary from Stroustrup:
The traditional way of dealing with concurrency by letting a bunch of
threads loose in a single address space and then using locks to try to
cope with the resulting data races and coordination problems is
probably the worst possible in terms of correctness and
comprehensibility.
(Like Jon Skeet, much of this assumes .NET)
At the risk of seeming argumentative, comments like these just bother me:
Learning to write multi-threaded
programs correctly is extremely
difficult and time consuming.
Threads should be avoided when
possible...
It is practically impossible to write software that does anything significant without leveraging threads in some capacity. If you are on Windows, open your Task Manager, enable the Thread Count column, and you can probably count on one hand the number of processes that are using a single thread. Yes, one should not simply use threads for the sake of using threads nor should it be done cavalierly, but frankly, I believe these cliches are used too often.
If I had to boil multithreaded programming down for the true novice, I would say this:
Before jumping into it, first understand that the the class boundary is not the same as a thread boundary. For example, if a callback method on your class is called by another thread (e.g., the AsyncCallback delegate to the TcpListener.BeginAcceptTcpClient() method), understand that the callback executes on that other thread. So even though the callback occurs on the same object, you still have to synchronize access to the members of the object within the callback method. Threads and classes are orthogonal; it is important to understand this point.
Identify what data needs to be shared between threads. Once you have defined the shared data, try to consolidate it into a single class if possible.
Limit the places where the shared data can be written and read. If you can get this down to one place for writing and one place for reading, you will be doing yourself a tremendous favor. This is not always possible, but it is a nice goal to shoot for.
Obviously make sure you synchronize access to the shared data using the Monitor class or the lock keyword.
If possible, use a single object to synchronize your shared data regardless of how many different shared fields there are. This will simplify things. However, it may also overly constrain things too, in which case, you may need a synchronization object for each shared field. And at this point, using immutable classes becomes very handy.
If you have one thread that needs to signal another thread(s), I would strongly recommend using the ManualResetEvent class to do this instead of using events/delegates.
To sum up, I would say that threading is not difficult, but it can be tedious. Still, a properly threaded application will be more responsive, and your users will be most appreciative.
EDIT:
There is nothing "extremely difficult" about ThreadPool.QueueUserWorkItem(), asynchronous delegates, the various BeginXXX/EndXXX method pairs, etc. in C#. If anything, these techniques make it much easier to accomplish various tasks in a threaded fashion. If you have a GUI application that does any heavy database, socket, or I/O interaction, it is practically impossible to make the front-end responsive to the user without leveraging threads behind the scenes. The techniques I mentioned above make this possible and are a breeze to use. It is important to understand the pitfalls, to be sure. I simply believe we do programmers, especially younger ones, a disservice when we talk about how "extremely difficult" multithreaded programming is or how threads "should be avoided." Comments like these oversimplify the problem and exaggerate the myth when the truth is that threading has never been easier. There are legitimate reasons to use threads, and cliches like this just seem counterproductive to me.
You may be interested in something like CSP, or one of the other theoretical algebras for dealing with concurrency. There are CSP libraries for most languages, but if the language wasn't designed for it, it requires a bit of discipline to use correctly. But ultimately, every kind of concurrency/threading boils down to some fairly simple basics: Avoid shared mutable data, and understand exactly when and why each thread may have to block while waiting for another thread. (In CSP, shared data simply doesn't exist. Each thread (or process in CSP terminology) is only allowed to communicate with others through blocking message-passing channels. Since there is no shared data, race conditions go away. Since message passing is blocking, it becomes easy to reason about synchronization, and literally prove that no deadlocks can occur.)
Another good practice, which is easier to retrofit into existing code is to assign a priority or level to every lock in your system, and make sure that the following rules are followed consistently:
While holding a lock at level N, you
may only acquire new locks of lower levels
Multiple locks at the same level must
be acquired at the same time, as a
single operation, which always tries
to acquire all the requested locks in
the same global order (Note that any
consistent order will do, but any
thread that tries to acquire one or
more locks at level N, must do
acquire them in the same order as any
other thread would do anywhere else
in the code.)
Following these rules mean that it is simply impossible for a deadlock to occur. Then you just have to worry about mutable shared data.
BIG emphasis on the first point that Jon posted. The more immutable state that you have (ie: globals that are const, etc...), the easier your life is going to be (ie: the fewer locks you'll have to deal with, the less reasoning you'll have to do about interleaving order, etc...)
Also, often times if you have small objects to which you need multiple threads to have access, you're sometimes better off copying it between threads rather than having a shared, mutable global that you have to hold a lock to read/mutate. It's a tradeoff between your sanity and memory efficiency.
Looking for a design pattern when dealing with threads is the really best approach to start with. It's too bad that many people don't try it, instead attempting to implement less or more complex multithreaded constructs on their own.
I would probably agree with all opinions posted so far. In addition, I'd recommend to use some existing more coarse-grained frameworks, providing building blocks rather than simple facilities like locks, or wait/notify operations. For Java, it would be simply the built-in java.util.concurrent package, which gives you ready-to-use classes you can easily combine to achieve a multithreaded app. The big advantage of this is that you avoid writing low-level operations, which results in hard-to-read and error-prone code, in favor of a much clearer solution.
From my experience, it seems that most concurrency problems can be solved in Java by using this package. But, of course, you always should be careful with multithreading, it's challenging anyway.
Adding to the points that other folks have already made here:
Some developers seem to think that "almost enough" locking is good enough. It's been my experience that the opposite can be true -- "almost enough" locking can be worse than enough locking.
Imagine thread A locking resource R, using it, and then unlocking it. A then uses resource R' without a lock.
Meanwhile, thread B tries to access R while A has it locked. Thread B is blocked until thread A unlocks R. Then the CPU context switches to thread B, which accesses R, and then updates R' during its time slice. That update renders R' inconsistent with R, causing a failure when A tries to access it.
Test on as many different hardware and OS architectures as possible. Different CPU types, different numbers of cores and chips, Windows/Linux/Unix, etc.
The first developer who worked with multi-threaded programs was a guy named Murphy.
Well, everyone thus far has been Windows / .NET centric, so I'll chime in with some Linux / C.
Avoid futexes at all costs(PDF), unless you really, really need to recover some of the time spent with mutex locks. I am currently pulling my hair out with Linux futexes.
I don't yet have the nerve to go with practical lock free solutions, but I'm rapidly approaching that point out of pure frustration. If I could find a good, well documented and portable implementation of the above that I could really study and grasp, I'd probably ditch threads completely.
I have come across so much code lately that uses threads which really should not, its obvious that someone just wanted to profess their undying love of POSIX threads when a single (yes, just one) fork would have done the job.
I wish that I could give you some code that 'just works', 'all the time'. I could, but it would be so silly to serve as a demonstration (servers and such that start threads for each connection). In more complex event driven applications, I have yet (after some years) to write anything that doesn't suffer from mysterious concurrency issues that are nearly impossible to reproduce. So I'm the first to admit, in that kind of application, threads are just a little too much rope for me. They are so tempting and I always end up hanging myself.
I'd like to follow up with Jon Skeet's advice with a couple more tips:
If you are writing a "server", and are likely to have a high amount of insert parallelism, don't use Microsoft's SQL Compact. Its lock manager is stupid. If you do use SQL Compact, DON'T use serializable transactions (which happens to be the default for the TransactionScope class). Things will fall apart on you rapidly. SQL Compact doesn't support temporary tables, and when you try to simulate them inside of serialized transactions it does rediculsouly stupid things like take x-locks on the index pages of the _sysobjects table. Also it get's really eager about lock promotion, even if you don't use temp tables. If you need serial access to multiple tables , your best bet is to use repeatable read transactions(to give atomicity and integrity) and then implement you own hierarchal lock manager based on domain-objects (accounts, customers, transactions, etc), rather than using the database's page-row-table based scheme.
When you do this, however, you need to be careful (like John Skeet said) to create a well defined lock hierarchy.
If you do create your own lock manager, use <ThreadStatic> fields to store information about the locks you take, and then add asserts every where inside the lock manager that enforce your lock hierarchy rules. This will help to root out potential issues up front.
In any code that runs in a UI thread, add asserts on !InvokeRequired (for winforms), or Dispatcher.CheckAccess() (for WPF). You should similarly add the inverse assert to code that runs in background threads. That way, people looking at a method will know, just by looking at it, what it's threading requirements are. The asserts will also help to catch bugs.
Assert like crazy, even in retail builds. (that means throwing, but you can make your throws look like asserts). A crash dump with an exception that says "you violated threading rules by doing this", along with stack traces, is much easier to debug then a report from a customer on the other side of the world that says "every now and then the app just freezes on me, or it spits out gobbly gook".
It's the mutable state, stupid
That is a direct quote from Java Concurrency in Practice by Brian Goetz. Even though the book is Java-centric, the "Summary of Part I" gives some other helpful hints that will apply in many threaded programming contexts. Here are a few more from that same summary:
Immutable objects are automatically thread-safe.
Guard each mutable variable with a lock.
A program that accesses a mutable variable from multiple threads without
synchronization is a broken program.
I would recommend getting a copy of the book for an in-depth treatment of this difficult topic.
(source: umd.edu)
Instead of locking on containers, you should use ReaderWriterLockSlim. This gives you database like locking - an infinite number of readers, one writer, and the possibility of upgrading.
As for design patterns, pub/sub is pretty well established, and very easy to write in .NET (using the readerwriterlockslim). In our code, we have a MessageDispatcher object that everyone gets. You subscribe to it, or you send a message out in a completely asynchronous manner. All you have to lock on is the registered functions and any resources that they work on. It makes multithreading much easier.
Question How can I make sure my application is thread-safe? Are their any common practices, testing methods, things to avoid, things to look for?
Background I'm currently developing a server application that performs a number of background tasks in different threads and communicates with clients using Indy (using another bunch of automatically generated threads for the communication). Since the application should be highly availabe, a program crash is a very bad thing and I want to make sure that the application is thread-safe. No matter what, from time to time I discover a piece of code that throws an exception that never occured before and in most cases I realize that it is some kind of synchronization bug, where I forgot to synchronize my objects properly. Hence my question concerning best practices, testing of thread-safety and things like that.
mghie: Thanks for the answer! I should perhaps be a little bit more precise. Just to be clear, I know about the principles of multithreading, I use synchronization (monitors) throughout my program and I know how to differentiate threading problems from other implementation problems. But nevertheless, I keep forgetting to add proper synchronization from time to time. Just to give an example, I used the RTL sort function in my code. Looked something like
FKeyList.Sort (CompareKeysFunc);
Turns out, that I had to synchronize FKeyList while sorting. It just don't came to my mind when initially writing that simple line of code. It's these thins I wanna talk about. What are the places where one easily forgets to add synchronization code? How do YOU make sure that you added sync code in all important places?
You can't really test for thread-safeness. All you can do is show that your code isn't thread-safe, but if you know how to do that you already know what to do in your program to fix that particular bug. It's the bugs you don't know that are the problem, and how would you write tests for those? Apart from that threading problems are much harder to find than other problems, as the act of debugging can already alter the behaviour of the program. Things will differ from one program run to the next, from one machine to the other. Number of CPUs and CPU cores, number and kind of programs running in parallel, exact order and timing of stuff happening in the program - all of this and much more will have influence on the program behaviour. [I actually wanted to add the phase of the moon and stuff like that to this list, but you get my meaning.]
My advice is to stop seeing this as an implementation problem, and start to look at this as a program design problem. You need to learn and read all that you can find about multi-threading, whether it is written for Delphi or not. In the end you need to understand the underlying principles and apply them properly in your programming. Primitives like critical sections, mutexes, conditions and threads are something the OS provides, and most languages only wrap them in their libraries (this ignores things like green threads as provided by for example Erlang, but it's a good point of view to start out from).
I'd say start with the Wikipedia article on threads and work your way through the linked articles. I have started with the book "Win32 Multithreaded Programming" by Aaron Cohen and Mike Woodring - it is out of print, but maybe you can find something similar.
Edit: Let me briefly follow up on your edited question. All access to data that is not read-only needs to be properly synchronized to be thread-safe, and sorting a list is not a read-only operation. So obviously one would need to add synchronization around all accesses to the list.
But with more and more cores in a system constant locking will limit the amount of work that can be done, so it is a good idea to look for a different way to design your program. One idea is to introduce as much read-only data as possible into your program - locking is no longer necessary, as all access is read-only.
I have found interfaces to be a very valuable aid in designing multi-threaded programs. Interfaces can be implemented to have only methods for read-only access to the internal data, and if you stick to them you can be quite sure that a lot of the potential programming errors do not occur. You can freely share them between threads, and the thread-safe reference counting will make sure that the implementing objects are properly freed when the last reference to them goes out of scope or is assigned another value.
What you do is create objects that descend from TInterfacedObject. They implement one or more interfaces which all provide only read-only access to the internals of the object, but they can also provide public methods that mutate the object state. When you create the object you keep both a variable of the object type and a interface pointer variable. That way lifetime management is easy, because the object will be deleted automatically when an exception occurs. You use the variable pointing to the object to call all methods necessary to properly set up the object. This mutates the internal state, but since this happens only in the active thread there is no potential for conflict. Once the object is properly set up you return the interface pointer to the calling code, and since there is no way to access the object afterwards except by going through the interface pointer you can be sure that only read-only access can be performed. By using this technique you can completely remove the locking inside of the object.
What if you need to change the state of the object? You don't, you create a new one by copying the data from the interface, and mutate the internal state of the new objects afterwards. Finally you return the reference pointer to the new object.
By using this you will only need locking where you get or set such interfaces. It can even be done without locking, by using the atomic interchange functions. See this blog post by Primoz Gabrijelcic for a similar use case where an interface pointer is set.
Simple: don't use shared data. Every time you access shared data you risk running into a problem (if you forget to synchronize access). Even worse, each time you access shared data you risk blocking other threads which will hurt your paralelization.
I know this advice is not always applicable. Still, it doesn't hurt if you try to follow it as much as possible.
EDIT: Longer response to Smasher's comment. Would not fit in a comment :(
You are totally correct. That's why I like to keep a shadow copy of the main data in a readonly thread. I add a versioning to the structure (one 4-aligned DWORD) and increment this version in the (lock-protected) data writer. Data reader would compare global and private version (which can be done without locking) and only if they differr it would lock the structure, duplicate it to a local storage, update the local version and unlock. Then it would access the local copy of the structure. Works great if reading is the primary way to access the structure.
I'll second mghie's advice: thread safety is designed in. Read about it anywhere you can.
For a really low level look at how it is implemented, look for a book on the internals of a real time operating system kernel. A good example is MicroC/OS-II: The Real Time Kernel by Jean J. Labrosse, which contains the complete annotated source code to a working kernel along with discussions of why things are done the way they are.
Edit: In light of the improved question focusing on using a RTL function...
Any object that can be seen by more than one thread is a potential synchronization issue. A thread-safe object would follow a consistent pattern in every method's implementation of locking "enough" of the object's state for the duration of the method, or perhaps, narrowed to just "long enough". It is certainly the case that any read-modify-write sequence to any part of an object's state must be done atomically with respect to other threads.
The art lies in figuring out how to get useful work done without either deadlocking or creating an execution bottleneck.
As for finding such problems, testing won't be any guarantee. A problem that shows up in testing can be fixed. But it is extremely difficult to write either unit tests or regression tests for thread safety... so faced with a body of existing code your likely recourse is constant code review until the practice of thread safety becomes second nature.
As folks have mentioned and I think you know, being certain, in general, that your code is thread safe is impossible (I believe provably impossible but I would have to track down the theorem). Naturally, you want to make things easier than that.
What I try to do is:
Use a known pattern of multithreaded design: A thread pool, the actor model paradigm, the command pattern or some such approach. This way, the syncronization process happens in the same way, in a uniform way, throughout the application.
Limit and concentrate the points of synchronization. Write your code so you need synchronization in as few places as possible and the keep the synchronization code in one or few places in the code.
Write the synchronization code so that the logical relation between the values is clear on both on entering and on exiting the guard. I use lots of asserts for this (your environment may limit this).
Don't ever access shared variables without guards/synchronization. Be very clear what your shared data is. (I've heard there are paradigms for guardless multithreaded programming but that would require even more research).
Write your code as cleanly, clearly and DRY-ly as possible.
My simple answer combined with those answer is:
Create your application/program using
thread safety manner
Avoid using public static variable in
all places
Therefore it usually fall into this habit/practice easily but it needs some time to get used to:
program your logic (not the UI) in functional programming language such as F# or even using Scheme or Haskell. Also functional programming promotes thread safety practice while it also warns us to always code towards purity in functional programming.
If you use F#, there's also clear distinction about using mutable or immutable objects such as variables.
Since method (or simply functions) is a first class citizen in F# and Haskell, then the code you write will also have more disciplined toward less mutable state.
Also using the lazy evaluation style that usually can be found in these functional languages, you can be sure that your program is safe fromside effects, and you'll also realize that if your code needs effects, you have to clearly define it. IF side effects are taken into considerations, then your code will be ready to take advantage of composability within components in your codes and the multicore programming.
When I was learning Java coming from a background of some 20 years of procedural programming with basic, Pascal, COBOL and C, I thought at the time that the hardest thing about it was wrapping my head around the OOP jargon and concepts. Now with about 8 years of solid Java under my belt, I have come to the conclusion that the single hardest thing about programming in Java and similar languages like C# is the multithreaded/concurrent aspects.
Coding reliable and scalable multi-threaded applications is just plain hard! And with the trend for processors to grow "wider" rather than faster, it is rapidly becoming just plain critical.
The hardest area is, of course, controlling interactions between threads and the resulting bugs: deadlocks, race conditions, stale data and latency.
So my question to you is this: what approach or methodology do you employ for producing safe concurrent code while mitigating the potential for deadlocks, latency, and other problems? I have come up with an approach which is a little unconventional but has worked very well in several large applications, which I will share in a detailed answer to this question.
This not only applies to Java but to threaded programming in general. I find myself avoiding most of the concurrency and latency problems just by following these guidelines:
1/ Let each thread run its own lifetime (i.e., decide when to die). It can be prompted from outside (say a flag variable) but it in entirely responsible.
2/ Have all threads allocate and free their resources in the same order - this guarantees that deadlock will not happen.
3/ Lock resources for the shortest time possible.
4/ Pass responsibility for data with the data itself - once you notify a thread that the data is its to process, leave it alone until the responsibility is given back to you.
There are a number of techniques which are coming into the public consciousness just now (as in: the last few years). A big one would be actors. This is something that Erlang first brought to the grid iron but which has been carried forward by newer languages like Scala (actors on the JVM). While it is true that actors don't solve every problem, they do make it much easier to reason about your code and identify trouble spots. They also make it much simpler to design parallel algorithms because of the way they force you to use continuation passing over shared mutable state.
Fork/Join is something you should look at, especially if you're on the JVM. Doug Lea wrote the seminal paper on the topic, but many researchers have discussed it over the years. As I understand it, Doug Lea's reference framework is scheduled for inclusion into Java 7.
On a slightly less-invasive level, often the only steps necessary to simplify a multi-threaded application are just to reduce the complexity of the locking. Fine-grained locking (in the Java 5 style) is great for throughput, but very very difficult to get right. One alternative approach to locking which is gaining some traction through Clojure would be software-transactional memory (STM). This is essentially the opposite of conventional locking in that it is optimistic rather than pessimistic. You start out by assuming that you won't have any collisions, and then allow the framework to fix the problems if and when they occur. Databases often work this way. It's great for throughput on systems with low collision rates, but the big win is in the logical componentization of your algorithms. Rather than arbitrarily associating a lock (or a series of locks) with some data, you just wrap the dangerous code in a transaction and let the framework figure out the rest. You can even get a fair bit of compile-time checking out of decent STM implementations like GHC's STM monad or my experimental Scala STM.
There are a lot of new options for building concurrent applications, which one you pick depends greatly on your expertise, your language and what sort of problem you're trying to model. As a general rule, I think actors coupled with persistent, immutable data structures are a solid bet, but as I said, STM is a little less invasive and can sometimes yield more immediate improvements.
Avoid sharing data between threads where possible (copy everything).
Never have locks on method calls to external objects, where possible.
Keep locks for the shortest amount of time possible.
There is no One True Answer for thread safety in Java. However, there is at least one really great book: Java Concurrency in Practice. I refer to it regularly (especially the online Safari version when I'm on travel).
I strongly recommend that you peruse this book in depth. You may find that the costs and benefits of your unconventional approach are examined in depth.
I typically follow an Erlang style approach. I use the Active Object Pattern.
It works as follows.
Divide your application into very coarse grained units. In one of my current applications (400.000 LOC) I have appr. 8 of these coarse grained units. These units share no data at all. Every unit keeps its own local data. Every unit runs on its own thread (= Active Object Pattern) and hence is single threaded. You don't need any locks within the units. When the units need to send messages to other units they do it by posting a message to a queue of the other units. The other unit picks the message from the queue and reacts on that message. This might trigger other messages to other units.
Consequently the only locks in this type of application are around the queues (one queue and lock per unit). This architecture is deadlock free by definition!
This architecture scales extremely well and is very easy to implement and extend as soon as you understood the basic principle. It like to think of it as a SOA within an application.
By dividing your app into the units remember. The optimum number of long running threads per CPU core is 1.
I recommend flow-based programming, aka dataflow programming. It uses OOP and threads, I feel it like a natural step forward, like OOP was to procedural. Have to say, dataflow programming can't be used for everything, it is not generic.
Wikipedia has good articeles on the topic:
http://en.wikipedia.org/wiki/Dataflow_programming
http://en.wikipedia.org/wiki/Flow-based_programming
Also, it has several advantages, as the incredible flexibile configuration, layering; the programmer (Component programmer) has not to program the business logic, it's done in another stage (putting the processing network together).
Did you know, make is a dataflow system? See make -j, especially if you have multi-core processor.
Writing all the code in a multi-threaded application very... carefully! I don't know any better answer than that. (This involves stuff like jonnii mentioned).
I've heard people argue (and agree with them) that the traditional threading model really won't work going into the future, so we're going to have to develop a different set of paradigms / languages to really use these newfangled multi-cores effectively. Languages like Haskell, whose programs are easily parallelizable since any function that has side effects must be explicitly marked that way, and Erlang, which I unfortunately don't know that much about.
I suggest the actor model.
The actor model is what you are using and it is by far the simplest (and efficient way) for multithreading stuff. Basically each thread has a (synchronized) queue (it can be OS dependent or not) and other threads generate messages and put them in the queue of the thread that will handle the message.
Basic example:
thread1_proc() {
msg = get_queue1_msg(); // block until message is put to queue1
threat1_msg(msg);
}
thread2_proc() {
msg = create_msg_for_thread1();
send_to_queue1(msg);
}
It is a tipical example of producer consumer problem.
It is clearly a difficult problem. Apart from the obvious need for carefulness, I believe that the very first step is to define precisely what threads you need and why.
Design threads as you would design classes : making sure you know what makes them consistent : their contents and their interactions with other threads.
I recall being somewhat shocked to discover that Java's synchronizedList class wasn't fully thread-safe, but only conditionally thread-safe. I could still get burned if I didn't wrap my accesses (iterators, setters, etc.) in a synchronized block. This means that I might've assured my team and my management that my code was thread safe, but I might've been wrong. Another way I can assure thread safety is for a tool to analyse the code and have it pass. STP, Actor model, Erlang, etc are some ways of getting the latter form of assurance. Being able to assure properties of a program reliably is/will be a huge step forward in programming.
Looks like your IOC is somewhat FBP-like :-) It would be fantastic if the JavaFBP code could get a thorough vetting from someone like yourself versed in the art of writing thread-safe code... It's on SVN in SourceForge.
Some experts feel the answer to your question is to avoid threads altogether, because it's almost impossible to avoid unforseen problems. To quote The Problem with Threads:
We developed a process that included
a code maturity rating system (with four levels, red, yellow, green, and blue), design reviews, code
reviews, nightly builds, regression tests, and automated code coverage metrics. The portion
of the kernel that ensured a consistent view of the program structure was written in early 2000,
design reviewed to yellow, and code reviewed to green. The reviewers included concurrency experts,
not just inexperienced graduate students (Christopher Hylands (now Brooks), Bart Kienhuis, John
Reekie, and [Ed Lee] were all reviewers). We wrote regression tests that achieved 100 percent code
coverage...
The... system itself began to be widely used, and every use of the system exercised this
code. No problems were observed until the code deadlocked on April 26, 2004, four years later.
The safest approach to design new applications with multi threading is to adhere to the rule:
No design below the design.
What does that mean?
Imagine you identified major building blocks of your application. Let it be the GUI, some computations engines. Typically, once you have a large enough team size, some people in the team will ask for "libraries" to "share code" between those major building blocks. While it was relatively easy in the start to define the threading and collaboration rules for the major building blocks, all that effort is now in danger as the "code reuse libraries" will be badly designed, designed when needed and littered with locks and mutexes which "feel right".
Those ad-hoc libraries are the design below your design and the major risk for your threading architecture.
What to do about it?
Tell them that you rather have code duplication than shared code across thread boundaries.
If you think, the project will really benefit from some libraries, establish the rule that they must be state-free and reentrant.
Your design is evolving and some of that "common code" could be "moved up" in the design to become a new major building block of your application.
Stay away from the cool-library-on-the-web-mania. Some third party libraries can really save you a lot of time. But there is also a tendency that anyone has their "favorites", which are hardly essential. And with each third party library you add, your risk of running into threading problems increases.
Last not least, consider to have some message based interaction between your major building blocks; see the often mentioned actor model, for example.
The core concerns as I saw them were (a) avoiding deadlocks and (b) exchanging data between threads. A lessor concern (but only slightly lessor) was avoiding bottlenecks. I had already encountered several problems with disparate out of sequence locking causing deadlocks - it's very well to say "always acquire locks in the same order", but in a medium to large system it is practically speaking often impossible to ensure this.
Caveat: When I came up with this solution I had to target Java 1.1 (so the concurrency package was not yet a twinkle in Doug Lea's eye) - the tools at hand were entirely synchronized and wait/notify. I drew on experience writing a complex multi-process communications system using the real-time message based system QNX.
Based on my experience with QNX which had the deadlock concern, but avoided data-concurrency by coping messages from one process's memory space to anothers, I came up with a message-based approach for objects - which I called IOC, for inter-object coordination. At the inception I envisaged I might create all my objects like this, but in hindsight it turns out that they are only necessary at the major control points in a large application - the "interstate interchanges", if you will, not appropriate for every single "intersection" in the road system. That turns out to be a major benefit because they are quite un-POJO.
I envisaged a system where objects would not conceptually invoke synchronized methods, but instead would "send messages". Messages could be send/reply, where the sender waits while the message is processed and returns with the reply, or asynchronous where the message is dropped on a queue and dequeued and processed at a later stage. Note that this is a conceptual distinction - the messaging was implemented using synchronized method calls.
The core objects for the messaging system are an IsolatedObject, an IocBinding and an IocTarget.
The IsolatedObject is so called because it has no public methods; it is this that is extended in order to receive and process messages. Using reflection it is further enforced that child object has no public methods, nor any package or protected methods except those inherited from IsolatedObject nearly all of which are final; it looks very strange at first because when you subclass IsolatedObject, you create an object with 1 protected method:
Object processIocMessage(Object msgsdr, int msgidn, Object msgdta)
and all the rest of the methods are private methods to handle specific messages.
The IocTarget is a means of abstracting visibility of an IsolatedObject and is very useful for giving another object a self-reference for sending signals back to you, without exposing your actual object reference.
And the IocBinding simply binds a sender object to a message receiver so that validation checks are not incurred for every message sent, and is created using an IocTarget.
All interaction with the isolated objects is through "sending" it messages - the receiver's processIocMessage method is synchronized which ensures that only one message is be handled at a time.
Object iocMessage(int mid, Object dta)
void iocSignal (int mid, Object dta)
Having created a situation where all work done by the isolated object is funneled through a single method, I next arranged the objects in a declared hierarchy by means of a "classification" they declare when constructed - simply a string that identifies them as being one of any number of "types of message receiver", which places the object within some predetermined hierarchy. Then I used the message delivery code to ensure that if the sender was itself an IsolatedObject that for synchronous send/reply messages it was one which is lower on the hierarchy. Asynchronous messages (signals) are dispatched to message receivers using separate threads in a thread pool who's entire job deliver signals, therefore signals can be send from any object to any receiver in the system. Signals can can deliver any message data desired, but not reply is possible.
Because messages can only be delivered in an upward direction (and signals are always upward because they are delivered by a separate thread running solely for that purpose) deadlocks are eliminated by design.
Because interactions between threads are accomplished by exchanging messages using Java synchronization, race conditions and issues of stale data are likewise eliminated by design.
Because any given receiver handles only one message at a time, and because it has no other entry points, all considerations of object state are eliminated - effectively, the object is fully synchronized and synchronization cannot accidentally be left off any method; no getters returning stale cached thread data and no setters changing object state while another method is acting on it.
Because only the interactions between major components is funneled through this mechanism, in practice this has scaled very well - those interactions don't happen nearly as often in practice as I theorized.
The entire design becomes one of an orderly collection of subsystems interacting in a tightly controlled manner.
Note this is not used for simpler situations where worker threads using more conventional thread pools will suffice (though I will often inject the worker's results back into the main system by sending an IOC message). Nor is it used for situations where a thread goes off and does something completely independent of the rest of the system such as an HTTP server thread. Lastly, it is not used for situations where there is a resource coordinator that itself does not interact with other objects and where internal synchronization will do the job without risk of deadlock.
EDIT: I should have stated that the messages exchanged should generally be immutable objects; if using mutable objects the act of sending it should be considered a hand over and cause the sender to relinquish all control, and preferably retain no references to the data. Personally, I use a lockable data structure which is locked by the IOC code and therefore becomes immutable on sending (the lock flag is volatile).