There is no SET TERM POSITION option in gnuplot.
I am using cygwin on windows 7.
Is there some kind of work-around?
Gnuplot version 5.0 knows a position option for the interactive terminals:
set terminal wxt 0 position 0,0
plot x
set terminal wxt 1 position 200,200
plot x**2
Related
I am trying to make a frame for a density plot. I start with
set terminal pngcairo size 400,400 enhanced
set output 'test.png'
set view map
unset tics
unset colorbox
set size ratio 1
set border 15 front lw 20
#set border 15 back lw 20
splot sin(sqrt(x**2+y**2))/sqrt(x**2+y**2) w pm3d notitle
If I use front the border looks continuous, but it eats a portion of the plot. If I use back, it no longer looks like a frame.
How can I make a proper frame such that it stays out of the plot region?
Using the square option for the line endings of the pngcairo terminal might help:
set terminal pngcairo size 400,400 enhanced square
set output 'test.png'
set view map
unset tics
unset colorbox
set size ratio 1
set border 15 back lw 20
splot sin(sqrt(x**2+y**2))/sqrt(x**2+y**2) w pm3d notitle
This produces:
One might also want to slightly increase the isosamples, e.g., set isosamples 100 to get a smoother plot:
I have recently upgraded to gnuplot 5 and have been unable to produce dashed lines using the TikZ terminal. Running these commands:
set term tikz
set output "test.tex"
test
produce dashed line types in gnuplot 4.6 (first image), but only solid ones in gnuplot 5 (second image). Is there a way to fix this without downgrading?
I have tried setting different values for the dashlength terminal option, but that didn't help.
With 5.0 gnuplot has changed its way to deal with dashed lines. All line types are solid by default, this is what the test command shows you.
To enable dashed lines, use the new dashtype keyword, e.g
plot for [i=1:4] i*x dashtype i
That works for all terminals which support dashed lines.
Note, that with dashtype you can also specify your own dash patterns.
Example script:
set terminal lua tikz linewidth 3 standalone
set output 'dash.tex'
unset key
set linetype 1 dashtype 2
set linetype 2 dashtype '..-'
set linetype 3 dashtype (2,2,4,4,6,6)
plot for [i=1:3] i*x
I'm trying to understand exactly how colors are processed in my terminal emulator (iTerm2).
In iTerm2 I can configure my "base 16" color palette - in iTerm2 this is done using HSL, not 16-bit RGB values. The colors defined this way are native - they use the cocoa API and are not limited to the typical 256 color palette (they are rendered in true color).
X11'srgb.txt defines names for the colors in the 256 color palette.
In a shell, bash or zsh, I can print text using the 16bit 256 color palette with echo -e "\e[38;5;82mHello \e[38;5;198mWorld" (the third parameter is the xterm color code)
In vim (terminal not gui) the colors are utilized as a 'cterm' value when defining highlights (for example: :highlight Normal ctermfg=188 ctermbg=233 guifg=#e8e8d3 guibg=#151515), however as far as I can tell - there is no way to define a terminal color using an RGB code, so while I can display the base16 colors in truecolor, the rest of the colors are arbitrarily limited to the 256 color palette.
What I haven't been able to figure out is where rgb values are mapped to the xterm codes. It appears to be an arbitrary relationship (the xterm codes don't appear to have a functional relationship with the RGB values), so I assume there must be a mapping somewhere.
I believe that the colors can be redefined in .Xresources (here is an example), but I'm unsure about a couple things:
.Xresources is specific to the xterm terminal emulator, and I'm using iTerm2, so (I believe) that this is irrelevant in my case. I've mucked around and iTerm2 doesn't seem to respect the .Xresources configuration. I was unable to find more documentation on this subject.
I've read that xterm will approximate color definitions from .Xresources that are outside of the web-safe palette - I'm not sure if this is true or exactly how it's done, but I imagine that this is a historical limitation associated with the amount of bits being used to store the colors.
So at this point I believe way it works is:
Terminal applications emit the xterm-compatible escape code sequence - and colors are always defined as an xterm color code (0-255).
iTerm2 detects the escape sequence.
iTerm2 uses an internal mapping that respects X11's rgb.txt to map the xterm color code to an HSL value.
iTerm2 renders color using the cocoa API.
So, no other applications (X11 or anything else) are involved in the color mapping or conversion - it's straight from the terminal application to the terminal emulator.
This being the case, since iTerm2 only allows user to configure the "base 16 colors" users are free to use true color when rendering those only, but restricted to the web-safe palette for all other colors.
Is this correct?
The default xterm palette is standard and expected to be the same in every xterm implementation. It is different from the more or less standard rgb.txt that is only used by GUI programs.
The first 16 colors, 0-15, have more or less standard names, "red", "darkgreen", etc. but all the others can only be referred to by their number, from 16 to 255.
The first 16 colors can usually be defined by the user (using CMYK, HSL, RGB or hexadecimal notation, it doesn't matter) so using "red" or "2" in a colorscheme is pretty much a shot in the dark as there's no guarantee whatsoever that "red" will actually be red. Solarized is an horrible example where the color traditionally referred to as "bright green" is actually a dark grey.
Most "modern" terminal emulators let you define those 16 colors with a GUI but other more "old school" emulators like xterm or rxvt use ~/.Xresources. That file is completely ignored by iTerm so you shouldn't waste your time on it.
It is possible to change the xterm palette but few people know about that which makes this practice very uncommon.
So…
terminal emulators don't use rgb.txt,
colors 0-15 are user-configurable,
colors 16-255 are restricted to the color chart in the first link,
colors 16-255 can be changed but it is rare,
iTerm doesn't use .Xresources.
I know from Gnuplot coloring 3D-vectors how one is supposed to color arrows. However, under Windows Gnuplot 4.6 Patchlevel 5 the following MWE does not produce red arrows but simply black ones.
reset
set terminal epslatex size 15cm,9.27cm color colortext 8 dashed
set style arrow 1 linecolor rgb "red"
file = 'OutputSetting0'
set output 'Setting0/test.tex'
set xrange [-1:1]
set yrange [-1:1]
set zrange [-1:1]
set arrow 1 from -1,0,0 to 1,0,0 arrowstyle 1
splot file u (0):(0):(0):2:3:4 with vectors arrowstyle 1
reset
exit
The extra arrow added by hand (set arrow ...) is colored red. However, the one with position data read from file is still black.
Is there another way how one could achieve colored arrows from file (except changing the terminal which is out of the question)?
As requested here is also a MWE of LaTeX code:
\documentclass{scrreprt}
\usepackage{color}
\usepackage{graphicx}
\usepackage{epstopdf}
\begin{document}
\begin{figure}[H]
\input{Setting0/test}
\end{figure}
\end{document}
Ok, it seems to be a bug?
Adding set hidden3d made my arrows go red. I promise I didn't touch any other part of my script.
I type in gnuplot "plot cos(x) lt 2" and want to take dashed line, but I take only solid line.
I use gnuplot 4.2 and ubuntu 10.04
It depends on the Terminal being used via
set term TYPE_OF_TERMINAL OPTIONS
Some Terminals are unable to display dashed lines.
You would see Terminal being set at the start: Terminal type set to 'TYPE_OF_TERMINAL'
example for ps/eps : set term postscript eps enhanced
At least this way you can include it in your TeX documents.