I am new to Haskell, and wanted to play around with snap framework. Unfortunately I just cant get the thing to compile. I've tried (all I know too), updating cabal and running sudo ghc-pkg recache but I still get the following when I run cabal install snap. Please help.
12 warnings and 1 error generated.
Failed to install binary-0.7.1.0
cabal: Error: some packages failed to install:
SHA-1.6.4 depends on binary-0.7.1.0 which faile
d to install.
binary-0.7.1.0 failed during the building phase
. The exception was:
ExitFailure 1
pwstore-fast-2.4.1 depends on binary-0.7.1.0 wh
ich failed to install.
snap-0.13.2.2 depends on binary-0.7.1.0 which f
ailed to install.
Solution:
I first install the 'real' gcc via homebrew like so:
brew update
brew install gcc47
This took a while to install (as in over an hour). Once it was done I updated the GHC settings to use the copy of gcc installed by homebrew.
GHC settings are located either here :
/Library/Frameworks/GHC.framework/Versions/Current/usr/lib/ghc-7.6.3/settings
or here if you installed ghc with homebrew (I did not).
/usr/local/Cellar/ghc/7.6.3/lib/ghc-7.6.3/settings
Update the line
("C compiler command", "/usr/bin/gcc")
to
("C compiler command", "/usr/local/Cellar/gcc47/4.7.3/bin/gcc-4.7")
Then just run
cabal update && cabal install snap
and all should be well. :)
Your problem is that the binary package has some C preprocessor constructs that are not strictly valid.
After looking around a bit, I found a similar problem somebody had when installing the Haskell platform. It seems the core issue is that the Clang C preprocessor is stricter than the GCC one most Haskellers use. I'm assuming that this is your problem: you're using Clang rather than GCC. If you're on OS X, this is the default choice.
The easiest solution seems to be to switch to using GCC for the preprocessing. Note that on OS X, /usr/bin/gcc actually points to Clang! You will need to point GHC to an actual install of GCC.
You can do this by editing GHC's configuration file. On my system it's found at
/usr/local/lib/ghc-7.6.3/settings
Yours is probably somewhere similar, although I'm on Linux rather than OS X. In the file, change
("C compiler command", "/usr/bin/gcc")
to point to an actual copy of gcc rather than Clang and try installing again.
In the long run, this feels like a bug with the package and probably needs to be addressed, although I don't really know enough about the issue or constraints package authors have to be sure.
Related
I'm trying to install ghc-mod for GHC 8.0.1 on windows/x64. When I try to install ghc-mod via cabal install ghc-mod I get an error saying my C compiler isn't working (it is using the c-compiler bundled with ghc).
Here is the output (of the second time I ran the command. Its basically what the first one says but reduced to the error message):
C:\Users\******>cabal install ghc-mod
Resolving dependencies...
Configuring old-time-1.1.0.3...
Failed to install old-time-1.1.0.3
Build log ( C:\Users\******\AppData\Roaming\cabal\logs\old-time-1.1.0.3.log ):
Configuring old-time-1.1.0.3...
bash.exe: warning: could not find /tmp, please create!
configure: WARNING: unrecognized options: --with-compiler
checking for gcc... C:\PROGRA~1\Haskell Platform\8.0.1\mingw\bin\gcc.exe
^ I think the error lies here, as you can see the file path is corrupted but I wasn't able to locate the cause for this
checking whether the C compiler works... no
configure: error: in `/cygdrive/c/Users/******/AppData/Local/Temp/cabal-tmp-6084/old-time-1.1.0.3':
configure: error: C compiler cannot create executables
See `config.log' for more details
cabal: Leaving directory 'C:\Users\******\AppData\Local\Temp\cabal-tmp-6084\old-time-1.1.0.3'
cabal: Error: some packages failed to install:
cpphs-1.20.2 depends on old-time-1.1.0.3 which failed to install.
ghc-mod-5.6.0.0 depends on old-time-1.1.0.3 which failed to install.
haskell-src-exts-1.17.1 depends on old-time-1.1.0.3 which failed to install.
hlint-1.9.35 depends on old-time-1.1.0.3 which failed to install.
old-time-1.1.0.3 failed during the configure step. The exception was:
ExitFailure 77
Could you please help me to install ghc-mod or provide any other way of installing it.
I already trieded reinstalling Haskell since I'm just starting off but this didn't make any difference.
And YES I added the 3 lines provided on the haskell homepage.
I can't know for certain, but thought I'd write an answer with what I think is going on.
The old-time package contains a configure script, which is a Unix shell script used to (surprise!) configure the package. The Cabal build system allows packages to automatically integrate configure, and will run the script for them. On POSIX systems, there's always a shell easily available. However, on Windows, that's not the case. I believe that's the problem you're running into.
Now the tricky part: why don't you have a shell? In theory, the Haskell Platform ships a shell. Well, here are my guesses:
For Stack usage, there's a Haskell Platform bug where Stack cannot find the MSYS tools, which include the shell script. Newer versions of Stack work around this bug, but passing in --no-system-ghc tells Stack to ignore any installed toolchain and manage the installation itself, which is more reliable than using HP's copy.
For Cabal usage, I'm less certain. I think the HP team decided to require you to use a special batch program to set environment variables correctly, so if you just run cabal install foo from a normal command window, Cabal won't find MSYS and it will fail. However, without more information, I can't be certain this is the case.
My personal recommendation: uninstall Haskell Platform, and use the recommended Stack installation instructions. In your case, that's just downloading and running the 64-bit Windows installer.
Finally: your suspected problem is not actually a problem; on Windows, pathnames longer than 8 characters can be compressed in the way you see (with ~1 at the end). There's nothing buggy in that path display.
Recently I was trying to install llvm-general-3.5.1.0 package.. for about a week. Basically I am getting this error: link. My situation is identical. Windows 10, ghc 7.10.2, cabal 1.22.4.0. I installed llvm 3.5.2 from sources with cmake and everything went fine. In llvm/lib directory I have *.lib files (eg. LLVMAnalysis.lib).
But somehow cabal can't see those libraries and gives this frustrating error:
Configuring llvm-general-3.5.1.0...
setup.exe: Missing dependencies on foreign libraries:
* Missing C libraries: LLVMLTO, LLVMObjCARCOpts, LLVMLinker, LLVMipo,
LLVMVectorize, LLVMBitWriter, LLVMCppBackendCodeGen, LLVMCppBackendInfo,
LLVMTableGen, LLVMDebugInfo, LLVMOption, LLVMX86Disassembler,
LLVMX86AsmParser, LLVMX86CodeGen, LLVMSelectionDAG, LLVMAsmPrinter,
LLVMX86Desc, LLVMX86Info, LLVMX86AsmPrinter, LLVMX86Utils, LLVMJIT,
LLVMIRReader, LLVMAsmParser, LLVMLineEditor, LLVMMCAnalysis,
LLVMMCDisassembler, LLVMInstrumentation, LLVMInterpreter, LLVMCodeGen,
LLVMScalarOpts, LLVMInstCombine, LLVMTransformUtils, LLVMipa, LLVMAnalysis,
LLVMProfileData, LLVMMCJIT, LLVMTarget, LLVMRuntimeDyld, LLVMObject,
LLVMMCParser, LLVMBitReader, LLVMExecutionEngine, LLVMMC, LLVMCore,
LLVMSupport
This problem can usually be solved by installing the system packages that
provide these libraries (you may need the "-dev" versions). If the libraries
are already installed but in a non-standard location then you can use the
flags --extra-include-dirs= and --extra-lib-dirs= to specify where they are.
I really want to use this package on my Windows, but nothing seems to work (I tried everything like --extra-lib-dirs and compiled also with MinGW and VS - the same problem).
I can't accept the fact that it won't install. I mean, there must be some way to fix Setup.hs from this cabal package or something. Does anyone have an idea what can be wrong with cabal in this case and how can I try to workaround this? I don't know how exactly cabal works, maybe someone with this knowledge will have an idea? Or maybe there is a way to do this without cabal?
Ok, i've managed to build it and, i think, found the root of the issue.
First, steps to build:
Get the MinGW. My installation of MinGW has gcc 4.8.
Get 32-bit MinGHC.
Compile LLVM 3.5 with MinGW's gcc and install it somewhere.
Copy contents of MinGW installation directory into MinGHC Install
Dir\ghc-7.10.2\mingw, replacing conflict files.
In the command line set your PATH so it has haskell toolset from
MinGHC (i recommend using switch .bat scripts) and llvm-config.exe.
Get the llvm-general package source either using cabal fetch or
downloading via browser from hackage.
Replace cc-options: -std=c++11 line of llvm-general.cabal with
cc-options: -std=gnu++11.
Finally, cabal configure and cabal build should work.
I have been changing my build environment many times, so if this doesn't work for you let me know, i probably forgot something.
Now let's go into details.
What we thought is a bug of cabal is not, actually. The problem is that both stack and MinGHC (and Haskell Platform, i guess) use quite old gcc - 4.6. This gcc has even two defects:
It doesn't support -std=c++11 and LLVM 3.5 can't be built using it.
As a consequence, this gcc can't be used by ghc when compiling
llvm-general, because it can't parse LLVM headers properly.
Even if it could, its linker can't link against LLVM libs compiled by
MinGW using gcc 4.8. This is why cabal was telling you it
couldn't find LLVM libs. I've hacked Setup.hs so that it wouldn't
look for these libs, but pass -lLLVMSomething to linker via -pgml
ghc option. This lead to clear error message:
ld.exe: ignoring libLLVMSupport.a ...
ld.exe: can't find -lLLVMSupport
So, the cabal was actually finding these libs, but was dropping them because they couldn't be linked to.
Ideally, the solution would be to update mingw distribution used by stack/MinGHC. But as a workaround you can just replace old gcc with new one.
Finally, -std=gnu++11 is used because current MinGW release is affected by this bug, which prevents compilation of c++ bits of the package. Whew, that was a long way.
I have decided to try to install gtk2hs on my Windows 8 (64 bit) machine. I am relying on the lastest Haskell Platform distribution.
So, I go on the wiki, and follow the instructions. I get gtk+ 32-bit distribution, version 2.24, in the all in one bundle. I unpack it correclty, set up PATH to point to gtk/bin, and create INCLUDE and LIB variables to point respectively to gtk/include and gtk/lib (this step does not seem necessary, but it can't hurt!)
I then verify all is in order by invoking
pkg-config --modversion gtk+-2.0
and the terminal happly chirps back
2.24.10
Great!
Then, I run cabal install
gtk2hs-buildtools
and that also goes well.
But then, when I run cabal install gtk, it complains that glib fails to install, because it can't find some C dependencies. I try to isolate the problem by running
cabal install glib
and get the following:
C:\Users\Federico>cabal install glib
Resolving dependencies...
Configuring glib-0.13.1.0...
Failed to install glib-0.13.1.0
Last 10 lines of the build log ( C:\Users\Federico\AppData\Roaming\cabal\logs\gl
ib-0.13.1.0.log ):
[1 of 2] Compiling Gtk2HsSetup ( Gtk2HsSetup.hs, dist\setup-wrapper\Gtk2HsS
etup.o )
[2 of 2] Compiling Main ( SetupMain.hs, dist\setup-wrapper\Main.o )
Linking dist/setup-wrapper\setup.exe ...
Configuring glib-0.13.1.0...
setup.exe: Missing dependencies on foreign libraries:
* Missing C libraries: gobject-2.0, gthread-2.0, glib-2.0, intl
This problem can usually be solved by installing the system packages that
provide these libraries (you may need the "-dev" versions). If the libraries
are already installed but in a non-standard location then you can use the
flags --extra-include-dirs= and --extra-lib-dirs= to specify where they are.
cabal: Error: some packages failed to install:
glib-0.13.1.0 failed during the configure step. The exception was:
ExitFailure 1
But this is utter crap! I KNOW the libraries are there. I can see them, in the gtk/bin folder! I re-check my path, and all is good. They are visible, in path. so is include, and lib. All of it. And yet, cabal complains it can't find them.
But this isn't the scariest bit yet...I download the 64-bit of the library, version 2.16...simply swap the two gtk folders...and now, cabal happly builds the whole thing! Of course, it's unsuable, because ghc on the plaftorm is 32-bit and the libraries are 64-bit, so ghc fails to link against it...but at least cabal was pleased.
I then remove glib, cairo, pango, gtk etc, and go about trying installing again, 2.16, 32-bit. And surely, cabal complains about C dependencies missing.
At this point, befuddled by this kafkian situation, I turn to the wisdom of stack overflow!
Is cabal trolling me? Are the error messages misleading? Or am I missing something obvious?
Thanks to all for the help!
If you are using 64 bit version of GHC, you want to use 64 bit version of gtk as well.
You can download it on this link. Scroll down a bit and download 2.x (not 3.x) all in one bundle, don't download 2.16:
http://www.gtk.org/download/win64.php
Above is no longer an option. You can try installing MSYS and than using MSYS console with pacman package manager to install gtk dev library on windows (I haven't tried it yet though). This pretty much sucks in my opinion.
using cabal; came accross this error.
did cabal install and this happened.
failed during the building phase. The exception was:
ExitFailure 1
checked my log; it said:
dist/package.conf.inplace:
inappropriate type
I have 0 ideas what's going on. cabal build works though. #STRANGE
CURRENTLY:
CABAL version: 1.22.0.0. Glorious Glasgow Haskell Compilation version: 7.8.4
Possible explanation: you have upgraded GHC to 7.10, which does things a bit differently I gather, but not upgraded cabal-install. If this is the problem, running
cabal install cabal-install -w ghc-7.8.4 # or whatever other version of GHC you have
may fix the problem.
You can get this error if you previously built your package with an older (or newer) version of Cabal and now are building with a newer (or older) version.
Not enough information to determine whether this is the problem in your case.
If it is, I think cabal clean should fix it (though I usually just rm -rf dist).
I am trying to install Haskell Platform 2014.2.0.0 from source on Red Hat Enterprise Linux 6.5. I have a functional install of Haskell Platform 2012.4.0.0 and GHC 7.4.2 from two years ago, plus a recently-installed Haskell Platform 2013.2.0.0 and GHC 7.6.3 from JustHub.
I've built GHC 7.8.3 from source, but it keeps coming up with seven failures in the test suite. I have no idea if these test failures are innocuous or not. (The test failures are not relevant to my question, but they may become significant later.)
I unpack the source tarball of 2014.2.0.0, read the README. It says that the way to build this iteration of Haskell is with a shell script, which is invoked:
./platform.sh $PATH_TO_GHC_BINDIST_TARBALL
I don't have a GHC binary distribution tarball. So far as I am able to tell, there is no binary distribution tarball of GHC 7.8.3 for any version of Red Hat Enterprise Linux. I have a built GHC 7.8.3. How do I tell platform.sh -- or whatever is underneath it -- that there is no tarball, and it should just use what's in $PATH? Alternately, how do I pack up my existing install of GHC 7.8.3 so that platform.sh will accept it?
The built GHC does not have a 'cabal' command, so the cabal commands in platform.sh are falling back to $PATH, which I can configure to be either of the other installed versions (2013.2/7.6.3 or 2012.4/7.4.2). It doesn't seem to make a difference: neither one recognizes 'cabal --sandbox'. Both result in complaints that I should run 'cd hptool ; cabal install --only-dependencies', which I've done, repeatedly. platform.sh never gets past that point.
If I run the commands in platform.sh by hand, I get to 'cd hptool; cabal build', which errors out: "cabal-1.16.0.2: Run the 'configure' command first.". But there is no 'configure' command available in the hptool directory.
I'm now stuck. How do I build Haskell Platform 2014 on RHEL 6?
You need to use your GHC sources to make your own "bindist." Directions at https://ghc.haskell.org/trac/ghc/wiki/MakingReleases
I managed to get Haskell Platform installed, and functional. I ended up abandoning platform.sh and just hand-installed all the packages in the Haskell Platform tarball -- and their dependencies -- with manual cabal commands. Along with the broken platform.sh, I ran into many problems on the way.
The ones that I remember:
platform.sh will never succeed if you have the stock Haskell Platform 2013 or previous installed. It wants a cabal that recognizes the '--sandbox' option, and cabal 1.18 doesn't know that option. You must have a newer cabal installed than Haskell Platform 2013 provides. (GHC 7.4 or 7.6 appears to be fine, though.)
I had an existing .cabal and .ghc directory, which had incompatible builds and/or versions of various packages. I deleted both directories numerous times while testing things.
cabal install --global behaves rather differently from the default cabal install --user. .cabal contained something useful after I did 'cabal install cabal-install'. It took two or three tries at that to figure out where the new cabal binary went.
ghc and cabal pick up new libraries in .ghc and .cabal, but not new binaries.
Neither GHC nor cabal install default to --enable-shared, except when something wants it. I had to go rebuild everything before that -- all the way back to GHC 7.8.3 itself -- with --enable-shared once that happened.
haddock is ridiculously tightly bound to the version of GHC it was built with. I had to rebuild it to get --enable-documentation to work for anything built with GHC 7.8.3.
The test packages and the text package are so tightly integrated that they have circular dependencies if you try to do 'cabal install text --enable-tests'. Even after installing the most recent version of text and the test packages, cabal still wouldn't run the text test suite, so I gave up and installed text without testing it.
My default environment includes 'LC_ALL=C'. This trips a known bug in cabal -- apparently in all versions -- that breaks some package builds. To work around it, I had to shift it to 'LC_ALL=en_US.utf8'. I have no idea if the packages affected will work if you have LC_ALL, or any of the other locale variables such as LANG or LC_<anything else>, set to C.
cabal install --global is terribly inconsistent about where packages get stored. We split out individual packages into their own subdirectories, and then build a symlink tree in a known place out of all those subdirectories. So ghc is in its own subdirectory of /usr/sup/ghc-7.8.3; Haskell Platform is in another subdirectory, /usr/sup/haskell-platform-2014.2.0.0. I consistently used --prefix=/usr/sup/haskell-platform-2014.2.0.0 on every 'cabal install' command, but even then, some libraries ended up in /usr/sup/ghc-7.8.3.
Both GHC and Haskell Platform have a dictionary of what's built and where it is -- perhaps as a workaround for the install location inconsistency -- in /usr/sup/ghc-7.8.3/lib/ghc-7.8.3/package.conf.d/package.cache. If that package dictionary isn't world-readable, ghc breaks. What it should do is look at the actual file structure to find things. Given that ghc breaks if the dictionary isn't available, the file shouldn't be called 'cache', as a cache miss shouldn't cause catastrophic failure. Perhaps rename it to 'package-mandatory-dictionary'?
Ultimately, it all installed, but I have to wonder about the damage I did from so much banging my head on the wall.