i am a complete noob to vba's but is this possible?#
I need to write a VBA to convert formula to value but leave as formula if the first column is empty
Is it what you need:
Sub test()
Dim rng As Range
Dim cell As Range
'change Sheet1 to suit
With ThisWorkbook.Worksheets("Sheet1")
'range with formulas
Set rng = .Range("B1:B100")
For Each cell In rng
If Trim(.Range("A" & cell.Row)) <> "" Then cell.Value = cell.Value
Next
End With
End Sub
Related
The situation:
In cells "D18:D94" and "E18:94" I have dropdown lists (data validation). In an additional sheet "Sheet2" in cells "R18:94", I have a formula.
Output wanted:
If cell "E18" is not empty then insert the value from "Sheet2!U18" to cell "F18". I want to loop this for each row from range.
I made something like this, but I don't know how to loop.
If Sheets("Sheet1").Range("E18").Value <> "" Then
Sheets("Sheet1").Range("F18").Value = Sheets("Sheet2").Range("R18")
End if
I don't want to set formula in Sheet1! "F" column because I have a dynamic print area.
Try below sub-
Sub FillData()
Dim sRng As Range, Rng As Range
Set sRng = Sheets("Sheet1").Range("E18:E94")
For Each Rng In sRng
If Rng.Value <> "" Then
Rng.Offset(0, 1).Value = Sheets("Sheet2").Range("R" & Rng.Row)
End If
Next Rng
Set sRng = Nothing
End Sub
I am trying to write some VBA in excel that will clear all cells starting from the next empty cell in Column A (data starts from A2). For example, if A5 is blank then I want A5:P300 to all be cleared (as in all Formula and Data gone). And so on... so if A20 is blank then it deletes everything from A20:P300..
How would I go about writing this? I also need it to refer to the active workbook but a specific worksheet called ("Develop").
Thanks for any help provided.
Sub Clear()
Dim x As Worksheet
Dim rng, cell As Range
Set x = ThisWorkbook.Worksheets("R&DCosts(2)")
Set rng = x.Range("A2:A340").Cells(Rows.Count, 1).End(xlUp)
For Each cell In rng
If cell.Value = "" Then
x.Range(cell.Address & ":P350").ClearContents
End
End If
Next cell
End Sub
Try this code, please:
Sub clearRange_Bis()
Dim sh As Worksheet, firstEmpt As Long
Set sh = ThisWorkbook.Worksheets("R&DCosts(2)")
firstEmpt = sh.Range("A1").End(xlDown).Row + 1
If firstEmpt > 1000000 Then
sh.Range("A2:P300").Clear
Else
sh.Range("A" & firstEmpt & ":P300").Clear
End If
End Sub
A more simple solution
Option Explicit
Sub Clear()
Dim x As Worksheet
Dim rng, cell As Range
Set x = ThisWorkbook.Worksheets("RDCosts(2)") ' you cannot use "&"
Set rng = x.Range("A2:A340", Cells(Rows.Count, 1).End(xlUp))
For Each cell In rng
If cell.Value = "" Then
x.Range(cell.Address & ":P350").ClearContents
End
End If
Next cell
End Sub
Goal: Have the column header of any text in red be represented in column F of the same row as the text.
Problem: Code currently references active row, and for some reason copies F2 (which is written in red). I know the code currently would be attempting to copy/paste over a cell a few times, and I'll work that out later.
Sub CopyRed()
Dim rng As Range
Dim row As Range
Dim cell As Range
Set rng = Range("G3:BF900")
For Each row In rng.Rows
For Each cell In row.Cells
If cell.Font.ColorIndex = 3 Then
Cells(2, ActiveCell.Column).Copy
Range("F" & (ActiveCell.row)).Select
ActiveSheet.Paste
End If
Next cell
Next row
End Sub
Not sure if I follow your logic. Your problem is that you reference active cell but you are not defining it or changing it other than through the pasting. I think you mean to reference cell (?)
Sub CopyRed()
Dim rng As Range
Dim row As Range
Dim cell As Range
Set rng = Range("G3:BF900")
For Each row In rng.Rows
For Each cell In row.Cells
If cell.Font.ColorIndex = 3 Then
Cells(2, cell.Column).Copy Range("F" & cell.row)
End If
Next cell
Next row
End Sub
You are never changing the active cell, so the copy command is always called on row 2 of the active cell, which much be in the F column. I changed the code below to fix the issue.
Sub CopyRed()
Dim rng As Range
Dim row As Range
Dim cell As Range
Dim ws As Worksheet
Set ws = ThisWorkbook.ActiveSheet ' this should be improved to point at the correct worksheet by name
Set rng = ws.Range("G3:BF900")
For Each row In rng.Rows
For Each cell In row.Cells
If cell.Font.ColorIndex = 3 Then
cell.Copy
ws.Range("F" & (cell.row)).PasteSpecial
End If
Next cell
Next row
End Sub
I am looking for a VBA code that could help me apply VLOOKUP on column "L" but only cells with specific text.
For example if the value in cell on column "L" is "#N/A", then it should replace it with the value returned from the VLOOKUP. If the value is not "#N/A", it should not change the actual value in the cell.
Here is the code that I tried
Range("L:L").NumberFormat = "mm/dd/yyyy"
lastrow6 = Range("K" & Rows.Count).End(xlUp).Row
Range("L3").Formula = "=IF(ISNA(VLOOKUP(A3,'[Ref_Data_Vivar.xlsx]Legacy PCO'!$A$2:$B$25628,2,0)),"""",IF(ISERROR(FIND(""#N/A"", VLOOKUP(A3,'[Ref_Data_Vivar.xlsx]Legacy PCO'!$A$2:$B$25628,2,0)))"
Range("L3").AutoFill Destination:=Range("L3:L" & lastrow3)
Range("L:L").value = Range("L:L").value
Something like this should do the trick:
Sub FindErrorInRange()
Dim cell As Variant
Dim rng As Range
'data range:
Set rng = Sheet1.Range("A1:A10")
For Each cell In rng
'checks for '#N/A error:
If CVErr(cell) = CVErr(xlErrNA) Then
'do something here:
MsgBox ("error found")
'example:
cell.Value = Application.WorksheetFunction.Lookup() '<-- insert your lookup values
End If
Next cell
End Sub
How can I create a macro that will add a day in one cell and subtract a day in another cell at the same time? Here is what I have so far.
Sub ChangeDates()
Dim cell As Range
For Each cell In Range("B:B")
cell.Value = cell.Value + 1
Next cell
For Each cell In Range("C:C")
cell.Value = cell.Value - 1
End Sub
I know you've accepted an answer, but I would like to offer this approach, which is even faster and more efficient than looping through all those cells.
If your dates are in Column A, then Column B will hold date +1 and Column C will hold date -1
Option Explicit
Sub ChangeDates()
Dim myRange As range
Dim mySheet As Worksheet
Set mySheet = Sheets("Sheet7") 'change to your sheet
With mySheet
Set myRange = .range("A1:A" & .range("A" & .Rows.Count).End(xlUp).Row)
myRange.Offset(, 1).FormulaR1C1 = "=RC[-1]+1"
myRange.Offset(, 2).FormulaR1C1 = "=RC[-2]-1"
End With
End Sub
Offset to the rescue!!
Sub ChangeDates()
Dim cell As Range
For Each cell In Range("B:B")
cell.Value = cell.Value + 1
cell.offset(0,1).value = cell.offset(0,1).value - 1
Next cell
End Sub
Another thing you may consider is either looking at usedrange to not have to iterate through all of column B or put in a check to make sure the cells aren't blank... Just faster, better coding and stops you from having bad values where the cells were originally blank...
Sub ChangeDates()
Dim cell As Range
For Each cell In Intersect(Range("B:B"), ActiveSheet.UsedRange)
cell.Value = cell.Value + 1
cell.Offset(0, 1).Value = cell.Offset(0, 1).Value - 1
Next cell
End Sub