Trying to install the SDL-gfx library on Windows, and running into problems at the configure:
Resolving dependencies...
Configuring SDL-gfx-0.6.0...
checking for sdl-config... /usr/bin/sdl-config
checking for gcc... gcc
checking for C compiler default output file name... a.exe
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... .exe
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for SDL_initFramerate in -lSDL_gfx... no
configure: error: *** SDL_gfx lib not found! Get SDL_gfx from
http://www.ferzkopp.net/~aschiffler/Software/SDL_gfx-2.0/
The link is broken, but I got the tar from http://www.ferzkopp.net/joomla/content/view/19/14/ and looked at the contents. It's a grab bag of header files, c files, etc. I'm not sure where to put these so that SDL-gfx's configure recognizes them. For fun I also grabbed some pre-compiled dll's and header files but I don't know where to put those either.
Anyone know where I should put those files to make them work?
I had similar struggles with SDL, but I eventually found an SDL download with an "include" and "lib" directory, and added them to extra-include-dirs and extra-lib-dirs in my .cabal/config...but I don't know what is "include" and what is "lib" for SDL_gfx.
Related
I would like to install 'readline' using Cabal on Windows. When running the command it is saying that readline isn't found. Cabal is up to date.
Command
cabal install readline
Output
Resolving dependencies...
Notice: installing into a sandbox located at
C:\Users\Michael\Desktop\haskell-project\.cabal-sandbox
Configuring readline-1.0.3.0...
Failed to install readline-1.0.3.0
Build log ( C:\Users\Michael\Desktop\haskell-project\.cabal-sandbox\logs\readline-1.0.3.0.log ):
Configuring readline-1.0.3.0...
checking for gcc... gcc
checking for C compiler default output file name... a.exe
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... .exe
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for GNUreadline.framework... checking for readline... no
checking for tputs in -lncurses... no
checking for tputs in -ltermcap... no
checking for tputs in -lcurses... no
checking for rl_readline_version... no
configure: error: readline not found, so this package cannot be built
See `config.log' for more details.
cabal: Error: some packages failed to install:
readline-1.0.3.0 failed during the configure step. The exception was:
ExitFailure 1
What could be the reason for this?
If you are using an msys distro that includes pacman (the one that ships with the windows haskell platform installer should be such a distro) then you can use pacman to install the readline library, and this should let you link against it.
Also note that ghc ships with the haskeline library, which is a pure-haskell replacement for readline that is more portable.
So I've been getting this problem (as seen below) on my CentOS 7 (64-bit) server when I try and configure wine with png with the following code:
./configure --with-png
I need this to run a specific server for a game called Mount & Blade Warband.
Because when I run the server i get this:
err:wincodecs:PngEncoder_CreateInstance Trying to save PNG picture, but PNG support is not compiled in.
fixme:ole:CoCreateInstance no instance created for interface {00000103-a8f2-4877-ba0a-fd2b6645fb94} of class {27949969-876a-41d7-9447-568f6a35a4dc}, hres is 0x80004005
I have looked at this post:
https://www.centos.org/forums/viewtopic.php?f=13&t=44897
They said that the following code should fix it:
yum install glibc-devel.i686
But it didn't, atleast not for me. I`m still getting the following error over and over:
checking build system type... x86_64-pc-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for cpp... cpp
checking for ld... ld
checking whether gcc -m32 works... no
configure: error: Cannot build a 32-bit program, you need to install 32-bit development libraries.
Solved, I had to run this code to install 32-bit devolpment libraries in order to do --with-png. The code came from this post:
https://www.centos.org/forums/viewtopic.php?f=48&t=49542
Code:
yum install glibc-devel.i686 dbus-devel.i686 freetype-devel.i686 pulseaudio- libs-devel.i686 libX11-devel.i686 mesa-libGLU-devel.i686 libICE-devel.i686 libXext-devel.i686 libXcursor-devel.i686 libXi-devel.i686 libXxf86vm-devel.i686 libXrender-devel.i686 libXinerama-devel.i686 libXcomposite-devel.i686 libXrandr-devel.i686 mesa-libGL-devel.i686 mesa-libOSMesa-devel.i686 libxml2-devel.i686 libxslt-devel.i686 zlib-devel.i686 gnutls-devel.i686 ncurses-devel.i686 sane-backends-devel.i686 libv4l-devel.i686 libgphoto2-devel.i686 libexif-devel.i686 lcms2-devel.i686 gettext-devel.i686 isdn4k-utils-devel.i686 cups-devel.i686 fontconfig-devel.i686 gsm-devel.i686 libjpeg-turbo-devel.i686 pkgconfig.i686 libtiff-devel.i686 unixODBC.i686 openldap-devel.i686 alsa-lib-devel.i686 audiofile-devel.i686 freeglut-devel.i686 giflib-devel.i686 gstreamer-devel.i686 gstreamer-plugins-base-devel.i686 libXmu-devel.i686 libXxf86dga-devel.i686 libieee1284-devel.i686 libpng-devel.i686 librsvg2-devel.i686 libstdc++-devel.i686 libusb-devel.i686 unixODBC-devel.i686 qt-devel.i686
I am trying to compile llvm in centos6. already followed this_thread to install gcc 4.7 and 4.8. but I am getting the next error message :
../llvm/configure --prefix=/opt/llvm/installation
checking for clang... clang
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether clang accepts -g... yes
checking for clang option to accept ISO C89... none needed
checking for clang++... clang++
checking whether we are using the GNU C++ compiler... yes
checking whether clang++ accepts -g... yes
checking how to run the C preprocessor... clang -E
checking whether clang works... yes
checking whether GCC or Clang is our host compiler... clang
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking type of operating system we're going to host on... Linux
checking type of operating system we're going to target... Linux
checking target architecture... x86_64
checking whether Clang is new enough... yes
checking whether Clang will select a modern C++ standard library... no
configure: error:
We detected a missing feature in the standard C++ library that was known to be
missing in libstdc++4.6 and implemented in libstdc++4.7. There are numerous
C++11 problems with 4.6's library, and we don't support GCCs or libstdc++ older
than 4.7. You will need to update your system and ensure Clang uses the newer
standard library.
what am I doing wrong ? how do I install libstdc++4.7 ?
using centos 6.
I have downloaded expect5.4 . I'm trying to cross compile it for ARM(PandaBoard) running stripped down version of linux.
In the initial setup of configuring , I try
Shell$ ./configure --host=ARM
configure: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used.
checking for correct TEA configuration... ok (TEA 3.9)
configure: configuring expect 5.45
checking for Tcl configuration... found /home/user1/scripts/tcl8.6.0/unix/tclConfig.sh
checking for existence of /home/user1/scripts/tcl8.6.0/unix/tclConfig.sh... loading
configure: --prefix defaulting to TCL_PREFIX /usr/local
configure: --exec-prefix defaulting to TCL_EXEC_PREFIX /usr/local
checking for ARM-gcc... /home/user1/toolchain/toolchain/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... yes
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether /home/user1/toolchain/toolchain/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc accepts -g... yes
checking for /home/user1/toolchain/toolchain/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc option to accept ANSI C... none needed
checking how to run the C preprocessor... /home/user1/toolchain/toolchain/arm-none-linux-gnueabi/bin/arm-none-linux-gnueabi-gcc -E
checking for a BSD-compatible install... /usr/bin/install -c
checking whether make sets $(MAKE)... yes
checking for ARM-ranlib... no
checking for ranlib... ranlib
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
..
..
..
..
..
checking for openpty... no
checking for openpty in -lutil... yes
checking if running Sequent running SVR4... no
checking build system type... i686-pc-linux-gnu
checking host system type... Invalid configuration `ARM': machine `ARM' not recognized
configure: error: /bin/bash tclconfig/config.sub ARM failed
UPDATE:
On compiling with ./configure --host=arm , It goes further the error i'm getting now is
checking for sysconf... yes
checking for strftime... yes
checking for strchr... yes
checking for timezone... yes
checking for siglongjmp... yes
checking for memcpy... yes
checking if WNOHANG requires _POSIX_SOURCE... configure: error: Expect can't be cross compiled
Its able to pick arm-gcc but it fails for some reason.
You will get a bit further with --host=arm (lowercase), but not
much: expect just doesn't want to be cross-compiled. Overcoming this
would require non-trivial modifications in configure.in. It could be
rational to work on them if expect is the only thing you want to
cross-compile, but if there are many others, you'd better setup some
environment where you can run compiled binaries (scratchbox or
something like that).
Expect (Version = 5.45.4) is available in buildroot 2019.11 and it has support for the PandaBoard.
You could
download `buildroot 2019.11' from the project .
Extract it
run make pandaboard_defconfig inside the buildroot-folder
run make menuconfig and enable TCL(-> Target packages
-> Interpreter languages and scripting) and then expect (-> Target packages
-> Interpreter languages and scripting) because of the dependency
run make to build the whole thing and get the executable from the
output/build/expect folder
Here's the message I get when trying to install in via cabal-install:
$ cabal install --extra-include-dirs="C:\no_spaces\cygwin\usr\include" --extra-lib-dirs="C:\no_spaces\cygwin\lib" readline
Resolving dependencies...
Configuring readline-1.0.1.0...
checking for gcc... gcc
checking for C compiler default output file name... a.exe
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... .exe
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for GNUreadline.framework... checking for readline... no
checking for tputs in -lncurses... yes
checking for readline in -lreadline... yes
checking for rl_readline_version... yes
checking for rl_begin_undo_group... yes
checking for rl_erase_empty_line... yes
checking for rl_free_undo_list... yes
checking for rl_completion_word_break_hook in -lreadline... yes
configure: creating ./config.status
config.status: creating config.mk
config.status: creating readline.buildinfo
config.status: creating include/HsReadlineConfig.h
config.status: include/HsReadlineConfig.h is unchanged
cabal.exe: Missing dependencies on foreign libraries:
* Missing header file: HsReadline.h
* Missing C libraries: readline, ncurses
This problem can usually be solved by installing the system packages that
provide these libraries (you may need the "-dev" versions). If the libraries
are already installed but in a non-standard location then you can use the
flags --extra-include-dirs= and --extra-lib-dirs= to specify where they are.
cabal.exe: Error: some packages failed to install:
readline-1.0.1.0 failed during the configure step. The exception was:
ExitFailure 1
I have readline.h and whatnot, and clearly it seems to find them. The lack of HsReadline.h being an issue seems strange: isn't that part of the package I'm trying to install?
Any advice on how to get this working would be appreciated. I've spent days mucking around trying to get this to work, whether under gnuWin32 readline, MinGW, or cygwin.
I'm going to venture a guess that what's throwing Cygwin off is the DOS/Windows-style path: "C:\no_spaces\cygwin\usr\include"
Try navigating to these files in the Cygwin shell. It'll probably look something like "/cygdrive/c/no_spaces/cygwin/usr/include"
The message about HsReadline.h is probably a red herring. The real issue is that Cabal can't find the underlying dev library to compile against.