Visual Studio 2012 complains about comparing two Brushes:
private void SetLabel(string stText, Brushes colorBackground)
{
if (colorBackGround == Brushes.Yellow)
...
}
Error message: "The name 'colorBackGround' does not exist in the current context"
colorBackGround is not the same as colorBackground! C# is case sensitive
Related
Header:
CChristianLifeMinistryHtmlView m_pHtmlView = nullptr;
Source:
m_pHtmlView = new CChristianLifeMinistryHtmlView();
Trying to change it to use a smart pointer. I can do this (inside OnInitDialog):
auto m_pHtmlView2 = std::make_unique<CChristianLifeMinistryHtmlView>;
But I can't work out how to have my smart pointer defined as a member variable of my CDialog class. I can't do: std::unique_ptr m_pHtmlView2.
I saw this discussion (Using smart pointers as a class member) and based on that I tried this in the header:
//CChristianLifeMinistryHtmlView *m_pHtmlView;
std::unique_ptr<CChristianLifeMinistryHtmlView> m_pHtmlView;
But that will not compile:
6>C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.30.30704\include\memory(3087,1): error C2248: 'CChristianLifeMinistryHtmlView::~CChristianLifeMinistryHtmlView': cannot access protected member declared in class 'CChristianLifeMinistryHtmlView'
6>D:\My Programs\2022\MeetSchedAssist\Meeting Schedule Assistant\ChristianLifeMinistryHtmlView.h(104): message : compiler has generated 'CChristianLifeMinistryHtmlView::~CChristianLifeMinistryHtmlView' here
6>D:\My Programs\2022\MeetSchedAssist\Meeting Schedule Assistant\ChristianLifeMinistryHtmlView.h(22): message : see declaration of 'CChristianLifeMinistryHtmlView'
6>C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.30.30704\include\memory(3085): message : while compiling class template member function 'void std::default_delete<CChristianLifeMinistryHtmlView>::operator ()(_Ty *) noexcept const'
6> with
6> [
6> _Ty=CChristianLifeMinistryHtmlView
6> ]
6>C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.30.30704\include\memory(3195): message : see reference to function template instantiation 'void std::default_delete<CChristianLifeMinistryHtmlView>::operator ()(_Ty *) noexcept const' being compiled
6> with
6> [
6> _Ty=CChristianLifeMinistryHtmlView
6> ]
6>C:\Program Files\Microsoft Visual Studio\2022\Preview\VC\Tools\MSVC\14.30.30704\include\memory(3122): message : see reference to class template instantiation 'std::default_delete<CChristianLifeMinistryHtmlView>' being compiled
6>D:\My Programs\2022\MeetSchedAssist\Meeting Schedule Assistant\AvailableBrothersReportPreview.h(52): message : see reference to class template instantiation 'std::unique_ptr<CChristianLifeMinistryHtmlView,std::default_delete<CChristianLifeMinistryHtmlView>>' being compiled
Update
Based on the advice in the comments I now have:
Header:
std::unique_ptr<CChristianLifeMinistryHtmlView> m_pHtmlView;
Source (in OnInitDialog):
m_pHtmlView = std::make_unique<CChristianLifeMinistryHtmlView>();
if (m_pHtmlView != nullptr)
{
m_pHtmlView->Create(nullptr, nullptr, AFX_WS_DEFAULT_VIEW,
m_rctPreviewHtml, this, 0);
m_pHtmlView->ShowWindow(SW_SHOWNORMAL);
if(CMeetingScheduleAssistantApp::WaitForFileToBeReady(m_strTempHtmlFile))
m_pHtmlView->Navigate2(m_strTempHtmlFile, 0, nullptr);
}
It complies and works. My popup dialog displays and the CHtmlView derived control is visible. Cool. But when I click OK to close the dialog I get an exception:
How do we address that?
CHtmlView is derived from CFormView -> CView, which deletes itself in CView::PostNcDestroy with delete this; So the memory is already managed.
Replace new with std::make_unique, and call release() immediately, because you don't want unique_ptr to delete it anymore.
//m_pHtmlView = new CChristianLifeMinistryHtmlView();
m_pHtmlView = std::make_unique<CChristianLifeMinistryHtmlView>().release();
If you had written new and delete in your original code (that also means you at least override CMyHtmlView::PostNcDestroy) then unique_ptr can be used to replace both new and delete.
In this case, you only had new in the original code. You don't want unique_ptr to manage delete
This information might be useful for those who are developing for Web and need to deploy for Android devices.
By handling double data type from a json model, I was experiencing the follow error in a flutter app running on real Android phone (not any emulator):
type '_Smi' is not a subtype of type 'double' as cast
This error did not happen for Web version and I did not try for IOS (because, I do not have any IOS device). Also, I did not perform tests on any emulators.
Here is my model:
class ModelExample {
int id;
String name;
double percentRank;
ModelExample({
this.id,
this.name,
this.percentRank,
});
factory ModelExample.fromJson(Map<String, dynamic> json) {
return ModelExample(
id: json['id'] as int,
name: json['api_name'] as String,
percentRank: json['api_percent_rank'] as double,
);
}
Map<String, dynamic> toJson() => {
'id': id.toString(),
'api_name': name,
'api_percent_rank': percentRank.toString(),
};
}
My environment is:
Flutter (Channel stable, 2.0.5, on Microsoft Windows [Version 10.0.19042.928], locale en-US)
Dart version 2.12.3
Android toolchain - develop for Android devices (Android SDK version 30.0.3)
Java version OpenJDK Runtime Environment (build 1.8.0_242-release-1644-b01)
Android Studio (version 4.1.0)
How can I get rid this error?
Answer:
A way to solve this issue is as follows:
By changing your model fromJson method (excerpt) from:
factory ModelExample.fromJson(Map<String, dynamic> json) {
...
percentRank: json['api_percent_rank'] as double,
...
}
to:
factory ModelExample.fromJson(Map<String, dynamic> json) {
...
percentRank: double.parse(json['api_percent_rank'].toString()),
...
}
After changed that line, that error will go away.
To know better, have a look at: https://api.flutter.dev/flutter/dart-core/double/parse.html
i came from Microsoft course on edx, the template 10 is not working even after installing the NuGet Package, it gives me this error while compilling:
Error CS0103 The name 'PropertyChanged_ViewModel' does not exist in the current context.
and with double clicking on it, it takes me to the DetailPage.g.cs and the error is in this function :
public void UpdateChildListeners_ViewModel(global::solarizer.ViewModels.DetailPageViewModel obj)
{
if (obj != cache_ViewModel)
{
if (cache_ViewModel != null)
{
((global::System.ComponentModel.INotifyPropertyChanged)cache_ViewModel).PropertyChanged -= PropertyChanged_ViewModel;
cache_ViewModel = null;
}
if (obj != null)
{
cache_ViewModel = obj;
((global::System.ComponentModel.INotifyPropertyChanged)obj).PropertyChanged += PropertyChanged_ViewModel;
}
}
}
}
i deleted those if blocks and the error disappeared and the app ran but without the Hamburger Menu, any idea on how to fix this ??
Please consider updating the Template 10 Visual Studio Extension to at least version 1.7 and the NuGet package to at least 1.1.2. Then, create your project using the Hamburger template and let me know if it works.
takes me to the DetailPage.g.cs
Those .g.cs files are auto generated, and you shouldn't be modifying them. I think a clean build here would solve this issue, (especially after you've upgraded to a new version of T10)
Need help to resolve an error.
Currently I am working on a migration project from visual c++ 6.0 to visual studio c++ 2005.
And during compilation, I am getting "Undeclared Identifier Error"
I am hearing pasting the code and error.
code
const SMbfIndexCash* GetIxCashed(const CPoint& ptIxBlock, const short nMbfID)
{
SMbfIndexCash* pCashFound;
for(int ixFound=0; ixFound<MBF_IX_CASH_SIZE; ixFound++)
{
pCashFound=&ElementAt(ixFound);
if(pCashFound->nAge<0)
return NULL;
if(nMbfID==pCashFound->nMbfID && ptIxBlock==pCashFound->ptIxBlock)
break;
}
if(ixFound==MBF_IX_CASH_SIZE)
return NULL;
}
Error.
1>c:\cm and nemesis\cm code\cm 8.16\cm
8.16.0.1\source\cmoslib\tile.h(466) : error C2065: 'ixFound' :
undeclared identifier
Thank you.
The ixFound is now local to the scope of the for loop.
you need to do something like:
int ixFound = 0;
for(ixFound=0; ixFound<MBF_IX_CASH_SIZE; ixFound++)
{
//...
}
//...
I have a very similar question to this SO post: TFS Build 2010 - Custom Binary Location and SharePoint WSP. There's no marked answer, but the only answer provided seemed to be the path to go.
I'm building several solutions and need the solutions and projects to be placed into their own folders. This lead to the build output change to the MSBuild call in the template that I'm using. I've been using this for sometime without any issues.
Recently a developer complained that the .wsp files were not being generated in our daily build. I looked into this and came across the fore mentioned SO post.
I followed the instructions and now have a new error:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\SharePointTools\Microsoft.VisualStudio.SharePoint.targets (411): Method not found: 'Boolean Microsoft.VisualStudio.SharePoint.PathUtils.HasIllegalDeploymentPathCharacters(System.String)'.
I've looked at this line (411) in the targets file:
<PackageFiles LayoutPath="$(LayoutPath)%(EnumeratedFiles.Package)\" PackagePath="$(BasePackagePath)%(EnumeratedFiles.Package).$(PackageExtension)" />
The PackageFiles target is defined:
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="PackageFiles" />
I checked the GAC and didn't see it there so I added it. The TFS 2010 Build machine has Visual Studio 2010 and Sharepoint 2010 installed on it. I don't think I need to do anything other than changing this task:
<CreateSharePointProjectService Configuration="$(Configuration)"
Platform="$(Platform)"
ProjectFile="$(MSBuildProjectFile)"
ProjectReferences="#(SharePointProjectReference)"
OutDir="$(TargetDir)">
<Output PropertyName="ProjectService" TaskParameter="ProjectService" />
</CreateSharePointProjectService>
So that OutDir points to $(TargetDir).
Am I missing something as to why I'm getting this error where now a method cannot be found? This error is very exasperating as there is no information on the web regardless of the Google Fu employed!
Update
I've pulled apart the Microsoft.VisualStudio.SharePoint.dll that's on the build server. There is no PathUtils class or Namespace. Could I possibly have a bad version of this file? How can I detect this? Should I install the Sharepoint SDK on the build server. It already has Sharepoint 2010 installed on it.
Update 2
I checked the GAC. The Microsoft.VisualStudio.Sharepoint assembly shows up. However, I can only find it when I'm running the x64 version of the Visual Studio Command Prompt. When I run the normal one I get no assembly back. I'm assuming that is because the Sharepoint assembly is 64 bit. As far as I know TFS is setup to be 64bit. Is this going to be my problem?
The PathUtils.HasIllegalDeploymentPathCharacters method is present in version 10.0.40219.1 of Microsoft.VisualStudio.SharePoint.Designers.Models.dll and not in version 10.0.30319.1 (where I was seeing this error).
You are missing the assembly "Microsoft.VisualStudio.SharePoint.Designers.Models.dll"
The following assemblies must be copied to the GAC of the build system:
Microsoft.VisualStudio.SharePoint.Designers.Models.dll
Microsoft.VisualStudio.SharePoint.Designers.Models.Features.dll
Microsoft.VisualStudio.SharePoint.Designers.Models.Packages.dll
Microsoft.VisualStudio.SharePoint.dll
Please refer to the following article for more information about the required assemblies:
http://msdn.microsoft.com/en-us/ff622991.aspx
Regards,
Wes MacDonald
I found a solution to this issue. I don't think anyone has ever encountered this so I'm doubtful there will be a "correct" solution. I will post here what I have done to allow my .wsp files to build in the solution.
By all means, please post an answer (or comment on either this answer or the original question) if you think there is a better solution or if my manner of solving the problem is not up to par.
I will explain this in steps that I came up with to solve the problem.
First Step
The task PackageFiles was giving me the issue. This task was unable to find a method to invoke. Looking at the file C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\SharePointTools\Microsoft.VisualStudio.SharePoint.targets we can find this on line 56:
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="PackageFiles" />
I know knew where to look for the PackageFiles task/class.
Step Two
After knowing where to look I decompiled the task. I used Telerik's JustDecompile but I also came up with the same code in Reflector.
I could clearly see the line:
if (PathUtils.HasIllegalDeploymentPathCharacters(str2))
Which was erroring.
Step Three
I ended up deciding that the PathUtils.HasIllegalDeploymentPathCharacters method was just there as a safety check. I could recreate this task in my own custom library and then insert it into a custom targets file.
Here was the class I came up with:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.IO;
using System.Reflection;
using Microsoft.VisualStudio.SharePoint.Tasks;
using Microsoft.Build.Framework;
namespace SharepointTaskLibrary
{
public class PackageFiles : BuildTask
{
[Required]
public ITaskItem LayoutPath
{
get;
set;
}
[Required]
public ITaskItem PackagePath
{
get;
set;
}
public PackageFiles()
{
}
protected override void OnCheckParameters()
{
if (this.LayoutPath == null)
{
throw new InvalidOperationException(Strings.GetString("LayoutPathNotSpecified"));
}
if (this.PackagePath == null)
{
throw new InvalidOperationException(Strings.GetString("PackagePathNotSpecified"));
}
}
protected override void OnExecute()
{
object[] objArray;
object[] objArray2;
object[] objArray3;
string metadata = this.LayoutPath.GetMetadata("FullPath");
string str1 = this.PackagePath.GetMetadata("FullPath");
Assembly sharepointTasksAss = Assembly.Load("Microsoft.VisualStudio.SharePoint.Tasks");
if (sharepointTasksAss != null)
base.Log.LogMessage(MessageImportance.High, "Found Tasks assembly!");
else
{
base.Log.LogError("Couldn't find the tasks assembly");
return;
}
if (!Directory.Exists(metadata))
{
base.Log.LogErrorFromResources("LayoutPathDoesNotExist", new object[] { metadata });
}
else
{
MethodInfo createCabMethod = GetStaticMethod(sharepointTasksAss, "Microsoft.VisualStudio.SharePoint.Tasks.Utilities.CabCreator", "CreateCabinet");
if (createCabMethod == null)
{
base.Log.LogError("the method could not be retrieved on type.");
return;
}
else
base.Log.LogMessage(MessageImportance.High, "Found method: " + createCabMethod.Name);
IEnumerable<string> strs = createCabMethod.Invoke(null, new object[] { metadata, str1 }) as IEnumerable<string>;
/*
* The following code would error in the original task.
*/
//foreach (string str2 in strs)
//{
// if (PathUtils.HasIllegalDeploymentPathCharacters(str2))
// {
// base.Log.LogWarningFromResources("FileNameContainsIllegalDeploymentPathCharacters", new object[] { str2 });
// }
//}
base.Log.LogMessage(MessageImportance.High, Strings.GetString("PackageCreatedSuccessfully"), new object[] { str1 });
}
Type codeMarkersType = null;
try
{
codeMarkersType = sharepointTasksAss.GetType("Microsoft.Internal.Performance.CodeMarkers", true);
}
catch (Exception e)
{
base.Log.LogErrorFromException(e, true);
}
if (codeMarkersType == null)
{
base.Log.LogError("Couldn't get the CodeMarkers class!");
return;
}
else
base.Log.LogMessage(MessageImportance.High, "Found the type: " + codeMarkersType.FullName);
/*
* This has yet to be added back in.
*/
//CodeMarkers.Instance.CodeMarker(CodeMarkerEvent.perfSharePointPackageWspPackageEnd);
}
private MethodInfo GetStaticMethod(Assembly assembly, string typeName, string methodName)
{
Type type = null;
try
{
type = assembly.GetType(typeName, true);
}
catch (Exception e)
{
base.Log.LogErrorFromException(e, true);
}
if (type == null)
{
base.Log.LogError("Couldn't get the type: " + typeName);
return null;
}
else
base.Log.LogMessage(MessageImportance.High, "Found the type: " + type.FullName);
MethodInfo methodInfo = type.GetMethod(methodName, BindingFlags.Static);
if (methodInfo == null)
{
MethodInfo[] methods = type.GetMethods().Union(type.GetMethods(BindingFlags.Static)).ToArray();
base.Log.LogWarning(string.Format("Wasn't able to find {0} directly. Searching through the static {1} method(s) on {2}", methodName, methods.Length, type.FullName));
foreach (MethodInfo info in methods)
{
if (info.Name == methodName && methodInfo == null)
methodInfo = info;
}
if (methodInfo == null)
{
MemberInfo[] members =
type.GetMembers().Union(type.GetMembers(BindingFlags.Static | BindingFlags.NonPublic)).Union(type.GetMembers(BindingFlags.NonPublic)).ToArray();
base.Log.LogWarning(string.Format("Wasn't able to find {0}. Searching through the {1} members(s) on {2}", methodName, methods.Length, type.FullName));
MemberInfo createCabMember = null;
foreach (MemberInfo member in members)
{
if (member.Name == methodName)
{
createCabMember = member;
break;
}
else
base.Log.LogMessage(MessageImportance.High, "Found member: " + member.Name);
}
if (createCabMember == null)
base.Log.LogError("Still wasn't able to find " + methodName + " in the members!");
}
}
return methodInfo;
}
}
}
Since most of the classes and methods are marked as internal I had to make use reflection to get the type and method needed to actually build the cab/wsp files. This is done in the method: GetStaticMethod
Step Four
If you read over the decompiled code and my custom version of the class you'll notice the Strings class. It appears to be a resource accessor class. I decided that I'd just decompile that code as well and use it in my solution that makes the custom task instead of reflecting every time I wanted to access a string resource. This file ended up not being a straight decompile as it has a line this.GetType().Assembly it uses to get the current assembly containing the resources. This works fine within the original assembly but causes a problem in this custom assembly.
The original line:
internal Strings()
{
this.resources = new ResourceManager("Strings", this.GetType().Assembly);
}
This line had to be changed to:
Assembly sharepointTasksAss = Assembly.Load("Microsoft.VisualStudio.SharePoint.Tasks");
this.resources = new ResourceManager("Strings", sharepointTasksAss);
Step Five
After I had a custom build task that mimics the original I needed to now place that into the targets file. I then backed up the original targets file and made a custom one replacing the UsingTask section like this:
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="CreateSharePointProjectService" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="EnumerateFiles" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="EnumerateFeature" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="EnumeratePackage" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="EnumerateProjectItem" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="LayoutFiles" />
<!-- The next task is a mimic of the one from the other assembly. I decompiled it and recreated it so it wouldn't error. LOL -->
<UsingTask AssemblyFile="C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\SharePointTools\SharepointTaskLibrary.dll" TaskName="PackageFiles" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="ResolveProjectMember" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="SetPackagingProperties" />
<UsingTask AssemblyFile="Microsoft.VisualStudio.SharePoint.Tasks.dll" TaskName="ValidatePackage" />
This made the task point to my DLL which contained the custom task. Specifically, this line:
<UsingTask AssemblyFile="C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\SharePointTools\SharepointTaskLibrary.dll" TaskName="PackageFiles" />
FINALLY
I dropped the compiled DLL and edited targets file into the C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v10.0\SharePointTools directory (again backing up the original targets file).
This allowed me to build via TFS 2010 with custom outputs the wsp files generated by the SharePoint solutions!
I used this site as a resource:
http://blogs.like10.com/2011/08/04/team-build-2010-customized-output-directories-sharepoint-2010-wsps/
(I may have used another one or two sites as a resource, but I can find them in the browser history at the moment).
Your mileage may vary, but please let me know if anyone has this similar issue and is able to fix it in a non "hacked" way.
UPDATE
This whole issue seems to have came from the original TFS install I was administering. I recently moved our team to a proper TFS server (2012) with a completely fresh OS install and a new database server. Once I migrated the databases over and ran the upgrade tasks in TFS I was able to do some small build edits to make my build work with 2012 and I did not encounter this issue a second time. I believe that because the original 2010 TFS was on a converted dev machine it caused this problem.