I need to get a list of matches with grep including filename and line number but without the match string
I know that grep -Hl will give only file names and grep -Hno will give filename with only matching string. But those not ideal for me. I need to get a list without match but with line no. For this grep -Hln doesn't work. I tried with grep -Hn 'pattern' | cut -d " " -f 1 But it doesn't cut the filename and line no properly.
awk can do that in single command:
awk '/pattern/ {print FILENAME ":" NR}' *.txt
You were pointing it well with cut, only that you need the : field separator. Also, I think you need the first and second group. Hence, use:
grep -Hn 'pattern' files* | cut -d: -f1,2
Sample
$ grep -Hn a a*
a:3:are
a:10:bar
a:11:that
a23:1:hiya
$ grep -Hn a a* | cut -d: -f1,2
a:3
a:10
a:11
a23:1
I guess you want this, just line numbers:
grep -nh PATTERN /path/to/file | cut -d: -f1
example output:
12
23
234
...
Unfortunately you'll need to use cut here. There is no way to do it with pure grep.
Try
grep -RHn Studio 'pattern' | awk -F: '{print $1 , ":", $2}'
Related
I am trying to find the number an even occured in my log file.
Command:
grep -Eo "2016-08-30" applciationLog.log* -c
Output:
applciationLog.log.1:0
applciationLog.log.2:0
applciationLog.log.3:0
applciationLog.log.4:0
applciationLog.log.5:7684
applciationLog.log.6:9142
applciationLog.log.7:8699
applciationLog.log.8:0
What I actually need is sum of all these values 7684 + 9142 + 8699 = 25525. Any suggestion I can do it? Anything I can append to the grep to enable it.
Any help or pointers are welcome and appreciated.
If you want to keep your grep command, pipe its output to awk, the quick and dirty way is down here:
grep -Eo "aaa" -c aaa.txt bbb.txt -c | awk 'BEGIN {cnt=0;FS=":"}; {cnt+=$2;}; END {print cnt;}'
Or use use awk regex directly:
awk 'BEGIN {cnt=0}; {if(/aaa/) {cnt+=1;}}; END {print cnt;}' aaa.txt bbb.txt
As addition to the already given answer by ghoti:
You can avoid awk -F: by using grep -h:
grep -c -h -F "2016-08-30" applicationLog.log* | awk '{n+=$0} END {print n}'
This means no filenames and only the counts are printed by grep and we can use the first field for the addition in awk.
See if this works for you:
grep -Eo "2016-08-30" applciationLog.log* -c | awk -F':' 'BEGIN {sum = 0;} {sum += $2;} END {print sum;}'
We use awk to split each line up with a delimeter of :, sum up the numbers for each line, and print the result at the end.
The grep command doesn't do arithmetic, it just finds lines that match regular expressions.
To count the output you already have, I'd use awk.
grep -c -F "2016-08-30" applciationLog.log* | awk -F: '{n+=$2} END {print n}'
Note that your grep options didn't make sense -- -E tells the command to use Extended regular expressions, but you're just looking for a fixed string (the date). So I swapped in the -F option instead. And -o tells grep to print the matched text, which you've overridden with -c, so I dropped it.
An alternative using for-loop and arithmetic expansion could be:
x=0
for i in $(grep -hc "2016-08-30" applciationLog.log*);do
x=$((x+i))
done
echo "$x"
An easy alternative is to merge all the files before grep sees them:
cat applciationLog.log* | grep -Eo "2016-08-30" -c
In my directory have have hundreds of files, each file contains lot of text along with a lines similar to this-
Job_1-Run.log:[08/27/20 01:28:40] Total Jobs Cancelled for Job_1_set0 = 10
I do
grep '^Total Jobs Cancelled' ./*
to get that above line.
Then I do a pipe
| awk 'BEGIN {cnt=0;FS="="}; {cnt+=$2;}; END {print cnt;}'
so my final command is-
grep '^Total Jobs Cancelled' ./* | awk 'BEGIN {cnt=0;FS="="}; {cnt+=$2;};END {print cnt;}'
and result is the sum. e.g. -
900
I am using Cmder # https://cmder.net/
Thanks to the answer by #alagner, #john above
I am having following syntax for one of my file.Could you please anyone explain me what is this command doing
path = /document/values.txt
where we have different username specified e.g username1 = john,username2=marry
cat ${path} | grep -e username1 | cut -d'=' -f2`
my question here is cat command is reading from the file value of username1 but why why we need to use cut command?
Cat is printing the file. The file has username1=something in one of the lines. The cut command splits this and prints out the second argument.
your command was not written well. the cat is useless.
you can do:
grep -e pattern "$path"|cut ...
you can of course do it with single process with awk if you like. anyway the line in your question smells not good.
awk example:
awk -F'=' '/pattern/{print $2}' inputFile
cut -d'=' -f2`
This cut uses -d'=' that means you use '=' as 'field delimiter' and -f2 will take only de second field.
So in this case you want only the value after the "=" .
I am trying to read/grep a particular word or content that is before a period (.).
e.g. file1 has abinaya.ashok and I want to grep whatever is before the period (.) without hardcoding anything.
if I try
grep \.\ file1
it gives abinaya.ashok.
I've tried: grep\*\.\ file1
it doesn't give anything.Can we find it using grep commands or should we do it only using awk command? Any thoughts?
Using GNU grep for PCRE regex (for non-greedy and positive look-ahead), you can do:
echo 'abinaya.ashok' | grep -oP '.*?(?=\.)'
abinaya
Using awk:
echo 'abinaya.ashok' | awk -F\. '{print $1}'
abinaya
Check the following simple examples.
Including the dot:
$ echo abinaya.ashok | grep -o '.*[.]'
abinaya.
Without the dot:
$ echo abinaya.ashok | grep -o '^[^.]\+'
abinaya
Hope I understand you correctly:
sed -n 's/\..*//p' file1 | grep whatever
sed expression will print only part before dot (lines without dot are not printed).
Now use grep to search what you need.
I have a number of log files in a directory. I am trying to write a script to search all the log files for a string and echo the name of the files and the line number that the string is found.
I figure I will probably have to use 2 grep's - piping the output of one into the other since the -l option only returns the name of the file and nothing about the line numbers. Any insight in how I can successfully achieve this would be much appreciated.
Many thanks,
Alex
$ grep -Hn root /etc/passwd
/etc/passwd:1:root:x:0:0:root:/root:/bin/bash
combining -H and -n does what you expect.
If you want to echo the required informations without the string :
$ grep -Hn root /etc/passwd | cut -d: -f1,2
/etc/passwd:1
or with awk :
$ awk -F: '/root/{print "file=" ARGV[1] "\nline=" NR}' /etc/passwd
file=/etc/passwd
line=1
if you want to create shell variables :
$ awk -F: '/root/{print "file=" ARGV[1] "\nline=" NR}' /etc/passwd | bash
$ echo $line
1
$ echo $file
/etc/passwd
Use -H. If you are using a grep that does not have -H, specify two filenames. For example:
grep -n pattern file /dev/null
My version of grep kept returning text from the matching line, which I wasn't sure if you were after... You can also pipe the output to an awk command to have it ONLY print the file name and line number
grep -Hn "text" . | awk -F: '{print $1 ":" $2}'
I have a product which has a command called db2level whose output is given below
I need to extract 8.1.1.64 out of it, so far i came up with,
db2level | grep "DB2 v" | awk '{print$5}'
which gave me an output v8.1.1.64",
Please help me to fetch 8.1.1.64. Thanks
grep is enough to do that:
db2level| grep -oP '(?<="DB2 v)[\d.]+(?=", )'
Just with awk:
db2level | awk -F '"' '$2 ~ /^DB2 v/ {print substr($2,6)}'
db2level | grep "DB2 v" | awk '{print$5}' | sed 's/[^0-9\.]//g'
remove all but numbers and dot
sed is your friend for general extraction tasks:
db2level | sed -n -e 's/.*tokens are "DB2 v\([0-9.]*\)".*/\1/p'
The sed line does print no lines (the -n) but those where a replacement with the given regexp can happen. The .* at the beginning and the end of the line ensure that the whole line is matched.
Try grep with -o option:
db2level | grep -E -o "[0-9]+\.[0-9]+\.[0-9]\+[0-9]+"
Another sed solution
db2level | sed -n -e '/v[0-9]/{s/.*DB2 v//;s/".*//;p}'
This one desn't rely on the number being in a particular format, just in a particular place in the output.
db2level | grep -o "v[0-9.]*" | tr -d v
Try s.th. like db2level | grep "DB2 v" | cut -d'"' -f2 | cut -d'v' -f2
cut splits the input in parts, seperated by delimiter -d and outputs field number -f