I am trying to use two WIFI adapters to form a WLAN network. I know the following command can setup a hostednetwork and I have already done it.
netsh wlan set hostednetwork [[mode={allow|disallow}] [[ssid=]WirelessNetworkName] [[key=]passphrase] [[keyUsage=]{persistent|temporary}]
netsh wlan start hostednetwork
However, the hostednetwork that I had setup is automatically mirror to the first adapter. How I can setup another hostednetwork that mirror to the second adapter? I have searched in the internet for long time but still cannot get a solution. Thandks.
According to my previous search, it's up to the windows to automatically chose which adapter is suitable, and you can't change that.
A work around might work, try it then report back to me the results:
Delete already setup-ed hostednetwork
Disable all the wireless adapters except the one you want to setup the hostednetwork on it
Setup hostednetwork
And no, you can't setup 2 hostednetworks.
Related
I've been trying to SSH to my RPi from an external network for a while with little luck. I've followed all the guides and they say all the same things: get SSH set up, port forward on port 22, and then connect using your external IP address. I've been able to easily SSH to the RPi using my internal IP from the same network with no problem, but not from my external IP. This is my configuration for port forwarding:
That is the internal IP for my RPi's ethernet connection. I've tried it with the IP for WiFi as well and it just has the same effect. When I try to SSH using my external IP, it just times out no matter which internal IP is port forwarded (ethernet or WiFi). I've tried it both on PuTTY on my PC and from my Macbook using
sudo ssh pi#my.external.ip.address
It still just times out. The only thing I can think that might be happening is some issue with a firewall, but I have no idea how firewalls work so if this has been seen before and it is a firewall issue, more detailed guide would be nice.
Even if the issue is not known, is there any way to debug the SSH call and see where exactly it's failing when I use the external IP? Any kind of help is greatly appreciated.
I recently struggled through a lot of this with my pi. As alvits suggests, if you are trying to connect to the pi via the LAN it probably won't work. You need to test from an external IP address.
You shouldn't need to sudo either.
If you are still using pi/raspberry as the username and password, change ASAP. Once the firewall is open it won't take long before you start to see bots trying to log in. I think it was about 30 minutes on my machine. It was interesting for a few days, then annoying. Almost all attacks stopped when I moved off of port 22.
According to this page, it does not appear that my router supports SSH. I was able to find guides online of how to enable it using custom firmware, however I probably won't be attempting that. Thanks for the help anyways!
My machine is connected to the office net work using wifi. My internet was working for some time without any issue. Suddenly this morning the internet stopped working although I could ping to 8.8.8.8 and other network IPs. I set the preferred DNS server and the alternate DNS server and made it work again. My question is why was it working without these settings and why did I need to enter these settings suddenly? What changes did my computer go through without me doing anything?
Had the DNS on your machine been set before? If so,minor changes to a WIFI policy would then make your machine create a second WIFI network connection. This would then make your previously set DNS no longer valid.
I'm trying to access the Cassandra browser terminal but the reported IP is unreachable.
I'm following the instructions to install Cassandra on VirtualBox here, and have the following configuration:
And Cassandra appears to start up appropriately:
But I'm unable to hit the provided IP (10.0.0.2)
Any idea what's wrong?
Ok, so I went to Install Cassandra OVA on VirtualBox and followed the instructions (like you did). And it didn't work for me, either.
What did work, was messing with the network settings and ultimately switching to a "Bridged" network adapter:
This put the CassandraVM on my internal network, and I was then able to reach everything from an internal IP (192.168.0.103, in my case).
Also, not sure if it made a difference, but I set Promiscuous Mode to "Allow All."
Had the same issue. Here's what worked for me (the solution came from this VirtualBox forum post).
In Host-only Network Details select the Adapter tab and change the ipv4 address into something inside the 10.0.0.x range. I think you should avoid conflicts with settings in the DHCP Server tab, thus a suitable choice would be 10.0.0.254, for example.
Also, I think you should configure your virtual machine's network settings this way:
Attach to: select Host-only Adapter
Name: select vboxnet0
I've also set Allow All for Promiscous Mode, but I don't know if it's strictly required.
Is there a command line or gui tool that I can use to make a client update its local nic settings without making them reboot or ipconfig /renew? I changed the DNS settings but the computers that have already received their IP address via dhcp need the new dns settings.
If you want to update the DNS settings and keep the clients as "auto obtain DNS settings from DHCP", then the answer is NO. However, you can set the DNS setting remotely using the netsh command line. Please note when you set the DNS using that command, you statically change the client's network properties.
I connected two laptops using a cross-over cable. My IP Address is 192.168.1.1 and the other IP Address is 192.168.1.16. We both are able to ping each other and the reply is perfect. There is no loss of packets.
The problem is I shared a file and the other system is not able to open my IP Address using the run command. Even I am not able to open my Shared folder by giving in the run (\\192.168.1.1). A dialogue box with the message \\192.168.1.1, The Network Path was not found opens each time we try this.
But I am able to open his shared folder by giving in run command (\\192.168.1.16). I closed all the firewall services in my system. But still my system is not able to respond. Also we are not able to use remote desktop connection.
Can anyone please help me in solving this?
Additional Details: I use Windows XP and the other machine uses Windows 7. We both are in the same work group.
Here are some steps to solve your problem:
Did you set the static IP by yourself or that come automatically?
If yes then please go and set the IP manually
Then share the file and put the permission of that file to Maximum (If you believe your partner)
Then power down the firewall or antivirus for some moments (say 10 minutes)
Now try to connect using the \192.xxx.xxx.xxx method using the Run window
If the 5th step is not working, then try disabling and reenabling the LAN card, then try the 5th step again.
Hope that solved your problem.
Remote Desktop needs to be explicitly enabled. Right click on "My computer", go to properties and look at the remote settings tab.
I advice you to use Radio Access Point to connect both windows 7 and windowsXP. I think this is best choice of troubleshoting jaringan. why?
Because I already do anything to connect both Operating System but can't solve that problem.