Say I've written code that references the x dimension. What is the best way to get vim to duplicate a line of code replacing all references to x to y and to z (best being the most clear method).
Input:
length_x = X_vec.dot(X_vec)**.5
Desired Output:
length_x = X_vec.dot(X_vec)**.5
length_y = Y_vec.dot(Y_vec)**.5
length_z = Z_vec.dot(Z_vec)**.5
Here's my best so far.
function SwitchXtoYZ()
:normal yy
:normal p
:normal! V
:s/X/Y/ge
:normal! V
:s/x/y/ge
:normal p
:normal! V
:s/X/Z/ge
:normal! V
:s/x/z/ge
endfunction
command XtoYZ exec SwitchXtoYZ() | :normal `.
It works, but I feel this is not very vim-y. Bonus points if the cursor returns to where it was before the command XtoYZ was issued (it currently goes the beginning of the second inserted line).
You don't need a function to do that, a macro would be fine for your requirement. Also you can define a macro in your vimrc too, if you like, so that you can have it everytime you open vim.
here is the macro:
qqv<Esc>Y2p:s/x/y/gi<Enter>n:s//z/gi<Enter>`<q
so it was recorded and saved in register q, you can #q to replay it.
explain it a little:
qq " start recording into q
v<esc> " enter visual mode and exit. to let `< work
Y2p " yank current line and paste twice below
:s/x/y/gi<Enter> " x->y sub, case insensitive
n " go to next x (here we could use j too)
:s//z/gi<Enter> " do another sub x->z
`< " back to the old cursor position
q " end recording
if you want to X->Y and x->y, just remove the i flag and add two more :s
The : at the beginning of each line is optional, as are the :normal! V lines.
You are leveraging the Normal commands that you know, which is a good way to start, but IMHO you get cleaner code if you use more Command-mode (ex) commands and functions. I would do something like this:
function! SwitchXtoYZ()
let save_cursor = getpos(".")
copy .
s/X/Y/ge
s/x/y/ge
-copy .
s/X/Z/ge
s/x/z/ge
call setpos('.', save_cursor)
endfun
command! XtoYZ call SwitchXtoYZ()
:help function-list
:help getpos()
:help :call
:help :exec
Related
I sometimes write a multi-word identifier in one order, then decide the other order makes more sense. Sometimes there is a separator character, sometimes there is case boundary, and sometimes the separation is positional. For example:
$foobar becomes $barfoo
$FooBar becomes $BarFoo
$foo_bar becomes $bar_foo
How would I accomplish this in vim? I want to put my cursor on the word, hit a key combo that cuts the first half, then appends it to the end of the current word. Something like cw, but also yanking into the cut buffer and then appending to the current word (eg ea).
Nothing general and obvious comes to mind. This is more a novelty question than one of daily practical use, but preference is given to shortest answer with fewest plugins. (Hmm, like code golf for vim.)
You can use this function, it swaps any word of the form FooBar, foo_bar, or fooBar:
function! SwapWord()
" Swap the word under the cursor, ex:
" 'foo_bar' --> 'bar_foo',
" 'FooBar' --> 'BarFoo',
" 'fooBar' --> 'barFoo' (keeps case style)
let save_cursor = getcurpos()
let word = expand("<cword>")
let match_ = match(word, '_')
if match_ != -1
let repl = strpart(word, match_ + 1) . '_' . strpart(word, 0, match_)
else
let matchU = match(word, '\u', 1)
if matchU != -1
let was_lower = (match(word, '^\l') != -1)
if was_lower
let word = substitute(word, '^.', '\U\0', '')
endif
let repl = strpart(word, matchU) . strpart(word, 0, matchU)
if was_lower
let repl = substitute(repl, '^.', '\L\0', '')
endif
else
return
endif
endif
silent exe "normal ciw\<c-r>=repl\<cr>"
call setpos('.', save_cursor)
endf
Mapping example:
noremap <silent> gs :call SwapWord()<cr>
Are you talking about a single instance, globally across a file, or generically?
I would tend to just do a global search and replace, e.g.:
:1,$:s/$foobar/$barfoo/g
(for all lines, change $foobar to $barfoo, every instance on each line)
EDIT (single occurrence with cursor on the 'f'):
3xep
3xep (had some ~ in there before the re-edit of the question)
4xea_[ESC]px
Best I got for now. :)
nnoremap <Leader>s dwbP
Using Leader, s should now work.
dw : cut until the end of the word from cursor position
b : move cursor at the beginning of the word
P : paste the previously cut part at the front
It won't work for you last example though, you have to add another mapping to deal with _ .
(If you don't know what Leader is, see :help mapleader)
I just got answer to jump to the line start with given character by typing
/ + ^[character]
But I thought it's not as fast as f to jump to character in a line. so i'm want to map it to a key combination like
go + [character]
by doing something like in the .vimrc
nmap go<expr> /^<expre>
See :help map-expression; you can query a single character with getchar():
:nnoremap <expr> go '/^' . nr2char(getchar()) . '<CR>'
it is hard to map this function directly. because the letter/character could be anything.
But this small function may work for you:
function! GoToLine()
call inputsave()
let c= input('Enter chars:')
call inputrestore()
call search ('^' . c)
let #/ = '^'.c
endfunction
you can map for example:
nnoremap <leader>go call GoToLine()
then enter chars you need, the function will bring you there. In this way you could enter more than one chars.
hope it helps.
I have a big file with a lot of lines that share the same pattern, something like this:
dbn.py:206 ... (some other text) <-- I am here
dbn.py:206 ... (some other text)
...
(something I don't know) <-- I want to jump here
Is there a quick way in Vim to jump to the place where the succession of dbp.py:206 ends?
/^\(dbn.py\)\#!
Matches first line which does not start with the text inside the escaped parentheses.
If you want quick access to this you could add a vmap which yanks the visually selected text and inserts it in the right spot (but first escaping it with escape(var, '/').
Try this vmap: vmap <leader>n "hy<Esc>/^\(<C-R>=escape(#h,'/')<CR>\)\#!<CR>
Press n when visually selecting the text you wish to skip and you should be placed on the next first line which does not begin with the selection.
I just write a function to select identical lines:
nnoremap vii :call SelectIdenticalLines()<CR>
fun! SelectIdenticalLines()
let s = getline('.')
let n = line('.')
let i = n
let j = n
while getline(i)==s && i>0
let i-=1
endwhile
while getline(j)==s && j<=line('$')
let j+=1
endwhile
call cursor(i+1, 0)
norm V
call cursor(j-1, 0)
endfun
type vii to select identical lines (feel free to change the key-binding)
type zf to fold them.
type za to toggle folding
It's handy when you want to squeeze several empty line.
It acts like C-x C-o in emacs.
One option is to go to the bottom of the file and search backwards for the last line you want, then go down one:
G ?^dbn\.py:206?+1
I would like to define a vim macro that breaks for user input at certain times, is this possible?
EDIT: Turns out I ment recordings (q), not macros
It is possible to use the input command in a recording, but it's more trouble than it's worth.
I first mapped insert input escape to a key
:map <F2> a<C-R>=input('input: ')<CR>
then I made this recording in the q register
name:
and pasted it into a new tab
iname: ^[
And after the final escape I pressed <C-V><F2> making the line:
iname ^[^[OQ
That I yanked back to the q buffer then used the macro, letting me use the input function.
It works, but terribly.
Yes. See the function input({prompt}, [, {text} [, {completion}] ]). There is even
inputdialog({prompt} [, {text} [, {cancelreturn}]]), for a dialog popup.
If you use input() inside a mapping or macro, the remaining characters will be taken as input, which is not what you want. Vim offers the inputsave() and inputrestore() functions to temporarily suspend reading from the mapping character stream.
Based on mogelbrod's answer, this doesn't work; the itest is read in as input:
oBEFORE ^R=input('prompt> ')^Mitest
But this does:
function! Input()
call inputsave()
let text = input('prompt> ')
call inputrestore()
return text
endfunction
oBEFORE ^R=Input()^Mitest
Unfortunately, because <C-R> takes an expression, we cannot put the commands inline, but have to define a separate Input() function.
Unfortunately it doesn't seem to be possible. You can trigger input() inside a macro, but continuing on afterwards doesn't seem to be possible as any additional input recorded is inserted into the input prompt.
Yank the line into a named register ("qY) and run it (#q) to try it out.
Note: replace ^R and ^M with Ctrl-V Ctrl-R/M (see :help i_CTRL-V).
oBEFORE ^R=input('prompt> ') - works
oBEFORE ^R=input('prompt> ')^Mitest - works, but inserts itest into the prompt
oBEFORE ^R=input('prompt> ')<CR>test - fails
I have collected information from this and other threads and written this script:
function! MacroInterrupt()
"call inputsave()
if strlen(reg_recording()) == 0
if mode() == 'n'
call inputsave()
let tmp_col = col('.')
let tmp_line = line('.')
let text = input('input:')
let line = getline('.')
call setline('.', strpart(line, 0, col('.') - 1) . text . strpart(line, col('.') - 1))
call cursor(tmp_line, tmp_col + strlen(text))
call inputrestore()
return text
else
call inputsave()
let text = input('input:')
call inputrestore()
return text
endif
else
echo "Interrupt added to macro"
call setreg(reg_recording(), getreg(reg_recording()) . "\<F2>")
"echo getreg("q")
endif
"call inputrestore()
endfunction
map <F2> :call MacroInterrupt() <CR>
inoremap <buffer><expr> <F2> MacroInterrupt()
I hope this can help especially people attempting the same.
I have a simple vim script that takes a visual block of text and stores it as a list. The problem with the function VtoList() is that it executes after the cursor returns to the start of the visual block, not before it. Because of this, I have no way of getting the line where the visual block ends.
nn <F2> :call VtoList()<CR>
func! VtoList()
firstline = line('v') " Gets the line where the visual block begins
lastline = line('.') " Gets the current line, but not the one I want.
mylist = getline(firstline, lastline)
echo mylist
endfunc
The problem is with line('.'). It should return the current line of the cursor, but before the function is called, the cursor has already returned to the start of the visual block. Thus, I'm only getting a single line instead of a range of lines.
I put together a solution that sets a mark everytime the user hits V and sets another mark before the function is called.
nnoremap V mV
nnoremap <F2> mZ:call VtoList()<CR>
The function works fine if I substitute line('v') and line('.') with line("'V") and line("'Z"), but I want to avoid this solution if I can because it could conflict with a user's mappings.
Is there a way I can get current line of a visual block within a function before the cursor has returned to the start of the visual block?
Don't use :, use <expr>:
function! s:NumSort(a, b)
return a:a>a:b ? 1 : a:a==a:b ? 0 : -1
endfunction
func! VtoList()
let [firstline, lastline]=sort([line('v'), line('.')], 's:NumSort')
let mylist = getline(firstline, lastline)
echo mylist
return ""
endfunc
vnoremap <expr> <F2> VtoList()
Note other changes: let (you forgot it), sort (line where selection starts may be after the line where selection ends), vnoremap (line("v") works only in visual mode), return (expr mappings return value is executed, but you don't need it, you need only side effects). You can replace the second line with
if mode()=~#"^[vV\<C-v>]"
let [firstline, lastline]=sort([line('v'), line('.')], 's:NumSort')
else
let [firstline, lastline]=sort([line("'<"), line("'>")], 's:NumSort')
endif
The reason why your solution is not working is that when : occurs in the mapping, you immediately exit visual mode and enter command mode. line("v") works only in visual mode.
Other note: vnoremap {lhs} : will produce command line already filled with '<,'>. You may have added range to the function definition and use let [firstline, lastline]=sort([a:firstline, a:lastline], 's:NumSort'). But you nevertheless will exit visual mode with :.