I am using Flash builder actionscript 3 Flex mobile.
I have a very heavy function that loads data from the local device and creates many graphic elements. While this function runs, the device freezes for 6 seconds or so.
I want to show a progress bar and let the device continue working, is there any way I can use threading to do this ? Other ideas are also welcome.
Thanks, Koby.
You know that at which function application getting freeze. Before that function call a progress bar. Create a progress bar in a pop up mode & call it. After 6 seconds(Not recommended) or getting the data just call removeallpopups() method. So now you can set the label in progress bar as "Loding..."
Sample code
<mx:ProgressBar id="sampleProgressBar" styleName="Calib16Blue"
indeterminate="true" labelPlacement="left"
label="{theMessage}"/>
Call this mxml by creating a pop up.
To do 'proper' muiltithreading you need to use the Worker Class (Documentation here), however the SQLConnection class and FileStream class have asynchronous methods that fit into the normal Actionscript event listener cycle and operate in "the background". Allowing the rest of the app to load when they're still pending.
Related
My Qt 5.9 program (on X11 Linux) launches other applications, using QProcess.
I would like to have control over windows these applications spawn, so I obtain their winId value and use QWindow::fromWinId to get a QWindow instance.
The problem is these instances are invalid and do not represent the window they are supposed to.
If I check the winId values using xwininfo, the correct information is returned, so I know they are good.
What am I doing wrong?
Edit: An example won't help much, but here goes:
QProcess *process=new QProcess(this);
...
process.open()
... // wait until window appears
WId winId=PidToWid(process->processId()); // this function returns the Window ID in decimal format. I test this with xwininfo, it's always correct
...
QWindow *appWindow=QWindow::fromWinId(winId);
... And that's basically it. appWindow is a valid QWindow instance, but it does not relate to the actual window in any way. For example, if I close() it, it returns true but the window does not close.
Even if I provide a wrong WId on purpose, the end result is the same.
This is not proper solution with explanation why it should work, however it may be helpful for somebody...
I had the same issue with my application when I switched from Qt4 QX11EmebeddedContainer to Qt5 implementation using QWindow. What I did to resolve / fix this issue was following:
Client application:
widget->show(); //Widget had to be shown
widget->createWinId();
sendWinId(widget->winId()); //Post window handle to master app where is constructed container
Master application:
QWindow* window = QWindow::fromWinId(clientWinId);
window->show(); //This show/hide toggle did trick in combination with show in client app
window->hide();
QWidget* container = QWidget::createWindowContainer(window, parentWindowWidget);
After this I was able to control window properly through QWidget container.
I'm trying to make a game (Universal DX11 application) and at some point I need access to image library to allow user to select avatar. But for some reason call of PickSingleFileAsync on picker rises an exception.
Windows::Storage::Pickers::FileOpenPicker^ openPicker = ref new Windows::Storage::Pickers::FileOpenPicker();
openPicker->SuggestedStartLocation = Windows::Storage::Pickers::PickerLocationId::PicturesLibrary;
openPicker->ViewMode = Windows::Storage::Pickers::PickerViewMode::Thumbnail;
// Filter to include a sample subset of file types.
auto filters = openPicker->FileTypeFilter;
filters->Clear();
filters->Append(".png");
openPicker->PickSingleFileAsync();// same exception with create_task(...);
Seems like the sample works only if I put it into UI thread. How can I use picker from my own thread?
UPD: HRESULT:0x80004005
Ok, I just decided to call dipatcher's RunAsync to execute this code. But I still have no idea why I cannot open picker inside non-UI thread.
When user opens map, my app starts loading much data from DB to show on map (when it's loaded).
But what i see is that map control stops loading/showing tiles when BG thread is loaded with hard work.
AFAIK WP7 doesn't support thread priorities.
This is really weird. Simple while(true) on BG thread stops map from showing new geodata on zoom/pan.
Maybe any ideas ?
Repro project: https://www.dropbox.com/s/21fmgepcdzf3u1n/Map_bug_Repro.zip
If you start it - map won't load. If you edit MainPage.xaml.cs and comment thread creation - it will work fine.
Thanks!
Background: I am using OmniThreadLibrary to load batch mode ADO stored procedures in the background. I am doing some slightly dodgy stuff by swapping the connection after opening the SP but that seems to be quite reliable. I'm using PostMessage to send messages back to the calling form and that works in my test applications. Primoz' comms channels work for me, I'm using those for inter-thread comms but for our main application I'm trying to avoid that dependency by using standard PostMessage calls as we do elsewhere in the app.
Problem: Unfortunately when I put this into our main application the PostMessage calls in the thread start failing with 1400:invalid window handle.
I have liberally added extra PostMessage calls and logging code to try to locate the problem, but I'm out of ideas now. The code is boilerplate:
const WM_PW_ADLQUEUEEMPTY = WM_USER + 11;
...
if PostMessage (OwnerHandle, WM_PW_ADLPROGRESS, QueueID, 10) then
pwDebugLog ('TADLQueue.Run WM_PW_ADLPROGRESS send to ' + IntToHex (OwnerHandle, 8) + ' (IsWindow '+BoolToStr(IsWindow(OwnerHandle),true)+') OK for Queue ' + IntToStr (QueueID))
else
pwDebugLog ('TADLQueue.Run WM_PW_ADLPROGRESS send to ' + IntToHex (OwnerHandle, 8) + ' (IsWindow '+BoolToStr(IsWindow(OwnerHandle),true)+') failed for Queue ' + IntToStr (QueueID));
But the log for a series of calls is not very revealing to me. note that the four hex digits after the time is the thread id from GetCurrentThreadID.
15:41:53.221 1614 TpwAsyncDataLoader.RunQueue WM_PW_ADLPROGRESS send to 00A5110C (IsWindow True) OK for Queue -6
15:41:53.265 13B4 TADLQueue.Run WM_PW_ADLPROGRESS send to 00A5110C (IsWindow True) OK for Queue -6
15:41:53.554 13B4 TADLQueueManager.WriteSysErrorMessageToDatabase Postmessage 00A5110C (IsWindow False) failed with 1400 Invalid window handle
Can anyone shed some light on this? I'm confused at how a window handle can become invalid while I'm looking at it, but that's what it looks like to me.
The one thing I can think of is that the form I'm showing here isn't processing messages and I'm seeing a "message queue full" failure rather than the IsWindow(handle) failure that it looks like. How can I test for that?
There are cases where a handle gets recreated, most notably when you change window flags. This might be what's happening in your application.
All I found so far about recreating windows handle is this post from Allen Bauer but I'm certain reading a more detailed one written by Peter Below. Unfortunatly I can't seem to find that one.
Finally, you need to be aware of cases
where your handle may need to get
recreated. This can happen if the
surrounding form or the parent
component's handle goes through a
recreate process. Up until more recent
releases of Windows, the only way to
change some window flags was to
destroy the handle and recreate with
new flags in the CreateWindowEx()
call. There are many components that
still do this. You know if you're in a
recreate situation by checking
(csRecreating in ControlState).
Edit
Not actually the posts from Peter I had in mind but it might give you some fresh ideas.
The form will not have a handle until
you show it the first time (unless
something in the form load sequence
request the handle) but the handle is
not destroyed when you hide the form
and unless you do something that
forces the form to recreate the
handle, e.g. change its border style
or border icons, or call RecreateWnd
yourself the handle will stay the
same.
It may not be desirable but it cannot
be avoided, at least not the way
Delphi drag&dock is currently
implemented. When you dock the dragged
form to another form it becomes a
control (with WS_CHILD window style)
and that means that its window handle
has to be destroyed and recreated with
the new style. And destroying the
window handle of a container control
automatically destroys the handles for
all child controls as well.
and
There is also the fact that the forms
window handle is destroyed and
recreated when you assign to its
Parent property. This also destroys
and recreates the handles for all
controls on the form.
I had a similar issue (but in VC++2010), and I did not find the solution on any forum, so I post it here, hope this will help:
Issue:
Creating a thread,
Passing the HWnd handle
In the thread, PostMessage
throws a 1400 error (invalid handle), although the pointer was equal
with the handle as seen from UI thread (with GetSafeHWnd()).
Solution:
Do not pass the handle, but the parent CDialog(Ex) class
This class has a m_hWnd member that will do the job
Here is a (Cpp) example, sorry for the cast mess.
// In the worker thread
ThreadParam *threadParam = (ThreadParam*)param
// This is ugly because my pointer is a void *, to avoid one more forward declaration
CCoreGenDlg *dlg = static_cast<CCoreGenDlg *>(threadParam->ptr);
// Post
bool b = PostMessage(dlg->m_hWnd ,1221,0,(LPARAM)message);
Cheers'
I've embedded an nsIWebBrowser in my application. Because I'm just generating HTML for it on the fly, I'm using OpenStream, AppendToStream, and CloseStream to add content. What I need is to add event listeners for mouse movement over the web browser as well as mouse clicks. I've read documentation and tried lots of different things, but nothing I have tried has worked. For instance, the code below would seem to do the right thing, but it does nothing:
nsCOMPtr<nsIDOMWindow> domWindow;
mWebBrowser->GetContentDOMWindow(getter_AddRefs(domWindow));
if (!mEventTarget) {
mEventTarget = do_QueryInterface(domWindow);
if (mEventTarget)
mEventTarget->AddEventListener(NS_LITERAL_STRING("mouseover"), (nsIDOMEventListener *)mEventListener, PR_FALSE);
}
Perhaps it isn't working because this is run during initialization, but before any content is actually added. However, if I add it during AppendStream, or CloseStream, it segfaults.
Please tell me a straightforward way to do this.
Well, here's the answer:
nsCOMPtr<nsIDOMEventTarget> cpEventTarget;
nsCOMPtr<nsIDOMWindow> cpDomWin;
m_pWebBrowser->GetContentDOMWindow (getter_AddRefs(cpDomWin));
nsCOMPtr<nsIDOMWindow2> cpDomWin2 (do_QueryInterface (cpDomWin));
cpDomWin2->GetWindowRoot(getter_AddRefs(cpEventTarget));
rv = cpEventTarget->AddEventListener(NS_LITERAL_STRING("mousedown"),
m_pBrowserImpl, PR_FALSE);