I'm just learning Haskell and am kind of stuck.
I'd like to compare list elements and measure the difference between them and return the highest one.
Unfortunatly, I do not know how to approach that problem.
For usual, I'd just iterate the list and compare the neighbours but that does not seem to be the way to go in Haskell.
I already tried using map but as I said I do not really know how you can solve that problem.
I'd be thankful for every kind of advice!
Best wishes
Edit: My idea is to first zip all pairs like this pairs a = zip a (tail a). Then I'd like to get all differences (maybe with map?) and then just chose the highest one. I just can't handle the Haskell syntax.
I don't know what you mean by "measure the discrepancy" between list elements, but if you want to calculate the "largest" element in a list, you'd use the built-in maximum function:
maximum :: Ord a => [a] -> a
This function takes a list of values that can be ordered, so all numbers, chars, and strings, among others.
If you want to get the difference between the maximum value and the minimum value, you can use the similar function minimum, then just subtract the two. Sure, there might be a slightly faster solution whereby you only traverse the list once, or you could sort the list then take the first and last elements, but for most cases doing diff xs = maximum xs - minimum xs is plenty fast enough and makes the most sense to someone else.
So what you want to do is compute a difference between successive elements, not calculate the minimum and maximum of each element. You don't need to index directly, but rather use a handy function called zipWith. It takes a binary operation and two lists, and "zips" them together using that binary operation. So something like
zipWith (+) [1, 2, 3] [4, 5, 6] = [1 + 4, 2 + 5, 3 + 6] = [5, 7, 9]
It is rather handy because if one of the lists runs out early, it just stops there. So you could do something like
diff xs = zipWith (-) xs ???
But how do we offset the list by 1? Well, the easy (and safe) way is to use drop 1. You could use tail, but it'll throw an error and crash your program if xs is an empty list, but drop will not
diff xs = zipWith (-) xs $ drop 1 xs
So an example would be
diff [1, 2, 3, 4] = zipWith (-) [1, 2, 3, 4] $ drop 1 [1, 2, 3, 4]
= zipWith (-) [1, 2, 3, 4] [2, 3, 4]
= [1 - 2, 2 - 3, 3 - 4]
= [-1, -1, -1]
This function will return positive and negative values, and we're interested only in the magnitude, so we can then use the abs function:
maxDiff xs = ??? $ map abs $ diff xs
And then using the function I highlighted above:
maxDiff xs = maximum $ map abs $ diff xs
And you're done! If you want to be fancy, you could even write this in point-free notation as
maxDiff = maximum . map abs . diff
Now, this will in fact raise an error on an empty list because maximum [] throws an error, but I'll let you figure out a way to solve that.
As mentioned by bheklilr, maximum is the quick and easy solution.
If you want some of the background though, here's a bit. What we're trying to do is take a list of values and reduce it to a single value. This is known as a fold, and is possible with (among others) the foldl function, which has the signature foldl :: (a -> b -> a) -> a -> [b] -> a.
The (a -> b -> a) section of foldl is a function which takes two values and returns one of the first type. In our case, this should be our comparison function:
myMax :: Ord a => a -> a -> a
myMax x y | x > y = x
| otherwise = y
(note that Ord a is required so that we can compare our values).
So, we can say
-- This doesn't work!
myMaximum :: Ord a => [a] -> a
myMaximum list = foldl myMax _ list
But what is _? It doesn't make sense to have a starting value for this function, so we turn instead to foldl1, which does not require a starting value (instead it takes the first two values from the list). That makes our maximum function
myMaximum :: Ord a => [a] -> a
myMaximum list = foldl1 myMax list
or, in pointfree format,
myMaximum :: Ord a => [a] -> a
myMaximum = foldl1 myMax
If you look at the actual definition of maximum in Data.List, you'll see it uses this same method.
map maps a function over a list. It transforms each thing1 in a list to a thing2.
What you want is to find the biggest difference between two neighbours, which you can't do with map alone. I'll assume you're only looking at numbers for now, because that's just easier.
diffs :: (Num a) => [a] -> [a]
diffs [] = []
diffs [x] = []
diffs (x1:x2:xs) = abs(x1-x2) : (diffs$x2:xs)
mnd :: (Num a, Ord a) => [a] -> a
mnd [] = 0
mnd [x] = 0
mnd xs = maximum$diffs xs
So diffs takes each list item one at a time and gets the absolute difference between it and its neighbour, then puts that at the front of a list it creates at it goes along (the : operator puts an individual element at the front of a list).
mnd is just a wrapper around maximum$diffs xs that stop exceptions being thrown.
Related
Reading the book Get Programming with Haskell, one of the questions was to find if a given element is in the first half of a list. This can be done as
isInFirstHalf x xs = elem x firstHalf
where firstHalf = take (length xs `div` 2) xs
However, the problem is that here length traverses the whole list. In an imperative language, one can shortcircut the loop early by keeping track of the element index and the current counter. E.g. if the list has a million elements, and there was a match on the third element, once you finish looping through the sixth element, you can immediately return true.
My question is if there's a way to implement something like this in Haskell.
Sure.
halfAsLong (x:_:xs) = x:halfAsLong xs
halfAsLong _ = []
isInFirstHalf x xs = elem x (zipWith const xs (halfAsLong xs))
Try it out:
> isInFirstHalf 3 (1:2:3:4:5:6:undefined)
True
Exercises for the reader:
Where did the element index and current counter of your proposed imperative solution go? (They are still in there, just hidden in a way I think is a bit subtle!)
This rounds down when dividing odd lengths in half, like length xs `div` 2 does. How would the code have to change to round up, like (length xs + 1) `div` 2 does?
Daniel Wagner posted a very nice answer that shows that you don't really need indices, after all.
Still, if you do want to use indices, a solution can be crafted as follows.
We enumerate all the list elements by pairing them with their indices. This is done by using zip [0..] xs (or zip [1..] xs if you want to start counting at 1).
We find whether your x is in the list, and find its index i if it's present. One could proceed by direct recursion, or use something like dropWhile ((/= x) . fst) ... and then test the result.
Once we know i, we need to check whether there are at least i elements after that. This can be solved by direct recursion, or by dropping i-1 elements and testing whether the result is a non empty list.
There are other alternatives, of course. We could for instance skip enumerating elements with zip [0..] and use recursion by keeping track of the current index: foo n x (y:ys) = ... foo (n+1) x ys ....
Here’s another way to think of the task. An element x appears in the first half of a list xs, excluding the midpoint, if there are strictly fewer elements before the first occurrence of the element than after it.
We can write break (== x) xs using the standard function break :: (a -> Bool) -> [a] -> ([a], [a]) to split xs into two parts: those appearing before x (or all of xs, if x is not found), and the remainder (including x, if it is found).
> break (== 0) []
([], [])
> break (== 0) [0, 1]
([], [0, 1])
> break (== 0) [1, 0]
([1], [0])
> break (== 0) [1, 2, 0, 3, 4]
([1, 2], [0, 3, 4])
> break (== 0) [1, 2, 3, 4]
([1, 2, 3, 4], [])
We then want to compare the lengths of these two parts without calculating the actual lengths strictly as Int. To do so, we can compute the shape of each part by ignoring all its elements, using shape = map (const ()), a.k.a. void :: (Functor f) => f a -> f () specialised to lists.
shape :: [a] -> [()]
shape = void
The Ord instance for lists sorts them lexicographically, and all values of type () are equal—okay, the only value of type ()—so a comparison of shapes [()] is a comparison of the lengths of the lists, which is also lazy enough for our purposes. (For maximal laziness, shape could be defined as genericLength on a lazy natural number type like data N = Z | S N with an appropriate Ord instance.)
> [] < repeat ()
True
> shape [5 .. 10] >= shape [1 .. 3]
True
> shape [1 .. 3] > shape [1 ..]
False
We can also “decrement” the shape of a list using drop 1, which we’ll use to skip counting the element itself if it was found. (Alternatively, we could “increment” the shape with (() :).)
Finally, putting these elements together leads to a fairly simple solution:
isInFirstHalf :: (Eq a) => a -> [a] -> Bool
isInFirstHalf x xs = shape before < shape (drop 1 after)
where
(before, after) = break (== x) xs
Notice that if the element was not found, after will be empty, so drop 1 will have no effect, but the shape of before can’t possibly be smaller than the empty shape [], so the comparison (<) will still correctly return False.
I have a Haskell problem and I came up with a solution but I just can't put pen to paper.
Basically I have a function calc that takes in an Int and returns a Float.
calc :: Int -> Int -> Float
In my function g I want to apply this function on an array
g :: [Int] -> [Float]
Since calc takes two Int parameters I want to consume two Ints (
x being the first index of the array and x+1 being second index). This will keep repeating the function on (index of array) [1][2], [2][3], [3][4] etc.
g :: [Int] -> [Float]
g [] = ""
g (x:xs) = map calc x x+1
calc :: Int -> Int -> Float
calc current last = (current - last / last) * 100
I've tried to research online on how to use map and it basically said like this? Any idea why the code doesn't want to compile and if x+1 is even a viable?
Unary map is map but binary map is zipWith. So what's to zip together? The two copies of the same list, shifted by one position one against the other:
calc :: Int -> Int -> Float
g :: [Int] -> [Float]
g xs = zipWith calc xs (drop 1 xs)
This is all. The zipping automatically stops when the shorter sequence runs out.
zipWith foo applies foo to each pair of arguments, each argument coming from the corresponding list, one element after the other. It could be implemented using zip as
zipWith foo xs ys = map (\ (x,y) -> foo x y) $ zip xs ys
= [ foo x y | (x,y) <- zip xs ys ]
but it already does this by itself.
As an illustration, drop 1 [1,2,3] == [2,3] and this means that
zipWith calc [1, 2, 3] (drop 1 [1, 2, 3]) ==
zipWith calc [1, 2, 3]
[2, 3 ] ==
[calc 1
2,
calc 2
3]
You wanted to use indices. Indices are practically never used in Haskell with lists. We instead achieve the same effect by structural jiggling, and then when we advance along the two lists one element at a time, each operation is O(1) because the next element is already at the top of the advanced list. Whereas with the indices we'd have to traverse the same list from the top anew each time, leading to O(k) time per each one (kth) element, i.e. quadratic behavior overall.
update: taking the zipping approach leads to a possibility of code fusion,
g2 xs = zipWith calc xs (drop 1 xs)
= [calc x y | (x,y) <- zip xs (drop 1 xs)]
= [calc x y | (x:y:_) <- tails xs] -- tails ~= iterate (drop 1)
because why build a new structure to house the two consecutive elements when they already appear in a structure ... the original list structure.
Interestingly, Common Lisp has this special kind of map, a map on tails, as part of the language. While the regular map is known there as mapcar, the map on tails is known there as maplist (it's a map on non-empty tails, to be precise).
I think the best a solution is
-- Returns the empty list on empty list due to laziness of zip
g xs = uncurry calc `map` zip xs (tail xs)
-- | |- this is the list of pairs with indeces: [(1,2), (2,3), (3,4) ...]
-- |- this converts a two arguments functions on a function with single 2-tuple argument
EDIT: #Will Ness solution is actually better.
I have function:
isEven n = (mod n 2) == 0
And a I want only even numbers, I get:
filter isEven [1, 2, 3, 4 ,5 ,6] -- -> 2, 4, 6
So far so good.
My question is: Is there in the function where I can filter by list index? (you can imagine js filter where second parameter is the index).
If not is there any reason why this is not included and how can I do it in a good haskell way?
If you want a function that filters on both values and indexes, you can write it yourself like this:
filterIndexed :: (a -> Int -> Bool) -> [a] -> [a]
filterIndexed p xs = [x|(x,i) <- zip xs [0..], p x i]
It uses a list comprehension which is nice for this kind of thing (filter and project). The reason this is not in the standard libraries is because it is a relatively rare operation, and it's fairly easy to have the list comprehension directly in your code.
I am new to Haskell, actually I just started, and I would like to get a small hint to the question I am about to ask.
I am currently trying to get the GCD of a given list. For example, having the list [3, 6, 9] it will return 3.
For the moment, I tought of the following aproach, am I going in a good direction?
let getGCD l = map (\x y -> gcd x y) l
Not quite, you don't want map but rather a fold. map will let you transform every element in the list uniformly, so you give it a local transformation a -> b and it gives you a global transformation ([a] -> [b]). This isn't really what you want.
As a quick primer on folds, there's a whole family of them which all let us express computations which we build up by repeatedly applying a function to an initial value, the next element and the list, and then repeating with the result of that application as the new initial value. So foldl' (+) 0 [1, 2, 3, 4] would so something like
foldl' (+) 0 [1, 2, 3, 4] ==>
foldl' (+) 1 [2, 3, 4] ==>
foldl' (+) 3 [3, 4] ==>
foldl' (+) 6 [4] ==>
foldl' (+) 10 [] ==> -- For empty lists we just return the seed given
10
Can you see how to slot your problem into this framework?
More hints
You want to take a list and compute a result which depends on every element of the list, something like
gcdAll :: [Int] -> Int
gcdAll l = foldl' step initial l
is closer to what you want where step takes the current gcd of the list you've processed so far and the next element of the list and returns the next value and initial is the value to start with (and what is returned if l is empty. Since there isn't really a sane value, I'd instead split this into
gcdAll :: [Int] -> Maybe Int
gcdAll [] = Nothing
gcdAll (h : rest) = Just $ foldl' step h rest
so that you correctly signal the possibility of failure, after all, what's the gcd of nothing?
Note that foldl' is imported from Data.List.
You can recursively use gcd on a list (essentially a fold implementation)
gcd' :: (Integral a) => [a] -> a
gcd' [] = 1
gcd' [x] = x
gcd' (x:xs) = gcd x (gcd' xs)
A GCD is a property of a pair of numbers. So, really, you want to look at pairs of numbers drawn from your list. Ultimately you want to end up with a single GCD for the entire list, but as a first step, you want pairs.
There's a widely-known trick for working with consecutive pairs:
f1 list = zipWith f2 list (tail list)
The zipWith function is a bit like map, but works with a pair of lists. In this case, the original list, and the tail of the original list. (Note that this fails if the list is empty.) If you replace f2 with your gcd function, you now have a new list which is the GCD of each consecutive pair of numbers. And this list is one element shorter than the original:
f1 [x, y, z, w] ==> [gcd x y, gcd y z, gcd z w]
So each time you apply f1 to a list, you get a new, shorter list of GCDs. Apply it enough times, and you should end up with just one element...
I just tackled this one and this would be the quickest, simplest
myGCDMultiple = foldr1 gcd
> myGCDMultiple [3,6,9]
3
I am new to Haskell and I have the following problem. I have to create a list of numbers [f1, f2, f3...] where fi x = x ^ i. Then I have to create a function that applies the fi to a list of numbers. For example if I have a list lis = [4,5,6,7..] the output would be [4^1, 5^2,6^3, 7^4...]. This is what I have written so far :
powers x= [x^y |y<-[1,2,3,4]]
list = [1,2,3,4]
match :: (x -> xs) -> [x] -> [xs]
match f [] = []
match f (x:xs) = (f x) : ( match f xs )
So if I put the list = [1,2,3] the output is [1,1,1,1][2,4,8,16],[3,9,27,81] instead of [1,4,27]
Can you please tell me what is wrong and point me to the right direction?
The first issue is that powers is of type Int -> [Int]. What you really want, I think, is something of type [Int -> Int] -- a list of Int -> Int functions instead of a function that takes an Int and returns a list of Int. If you define powers like so:
powers = [(^y) | y <- [1..4]]
you can use zipWith to apply each power to its corresponding element in the list, like so:
zipWith ($) powers [1,2,3] -- returns [1,4,27]
The ($) applies its left (first) argument to its right (second) argument.
Note that using powers as defined here will limit the length of the returned list to 4. If you want to be able to use arbitrary length lists, you want to make powers an infinite list, like so:
powers = [(^y) | y <- [1..]]
Of course, as dave4420 points out, a simpler technique is to simply use
zipWith (^) [1,2,3] [1..] -- returns [1,4,27]
Your match is the standard function map by another name. You need to use zipWith instead (which you can think of as mapping over two lists side-by-side).
Is this homework?
You are currently creating a list for every input value.
What you need to do is recursively compute the appropriate
power for each input value, like this:
match f [] = []
match f (x:xs) y = (f x y) : (match f xs y+1)
Then, you can call this as match pow [1, 2, 3] 1.
This is equivalent to using zipWith and providing the desired function (pow), your input list ([1, 2, 3]) and the exponent list (a lazy one to infinity list) as arguments.