I've been trying to use Web Deploy 3.5 to deploy an application to an IIS 6 web server without any luck.
I am connecting using a domain service account that is an administrator of the remote server, but when I attempt to deploy (or validate the connection in VS2012) I receive a "ERROR_USER_NOT_ADMIN" error instead.
I read that Web Deploy 2.0 had a bug in it where a domain user account could not be used, but surely that's fixed by now? Right?
Has anyone had any luck with IIS 6.0, Web Deploy 3.5 and domain user accounts?
Anyone else trying this (with the right password ;-) , there is an issue using non domain accounts that gives this message, and the link in the error wasn't much use for me....
There is a regedit (yes, I know it's dirty, but this was a dev machine), which gets this working.... I'd tried everything from the MS link with adding users to additional groups etc, but still didn't work, the solution below did though.
Take a look at http://networkprogramming.wordpress.com/2010/10/29/401-not-authorized-for-msdeploy%E2%80%8F-msdeployagentservice/
Well this is embarrassing. It looks like that error message is also returned if the password is incorrect.
Oh well, you live and learn!
Another possibility: The user's password has expired.
Either
go into the "local users" within computer management and make sure Password never expires is checked, OR
run this command for that user: WMIC USERACCOUNT WHERE "Name='YOUR-USERNAME-HERE'" SET PasswordExpires=FALSE
Related
I just installed b2c_acc_plus recipe and after it i also installed powertools B2B add on. When i am trying to access the accelerator website, i am getting a message on browser "Server Error". However strangely the Platform site is working. The server logs are also not showing any error.
I changed the host file. In HAC/Extentions all the B2C and B2B extention are showing installed.
Before installing the B2B addons the B2C sites were working, server logs are showing cronjobs for B2C & B2B. Any idea what could be problem?
In case an error is thrown, the tomcat server logs are very helpful.
Not sure how you started the application with a recipe or by executing hybrisserver.sh (on linux) in the .../hybris/bin/platform folder. You can take a look in the tomcat logfile directly in .../hybris/log/tomcat/console<date>.log file.
Without this, it's very hard to providing help.
Try to set logging level to debug and make sure you're passing site name in the URL. E.g. .../yacceleratorstorefront?site=electronics
Where did you get trainingstorefront? If you are using OOTB accelerator, it would be yacceleratorstorefront.
Please try to hit below URL and it should work.
http://localhost:9001/yacceleratorstorefront/?site=electronics&clear=true
http://localhost:9001/yacceleratorstorefront/?site=apparel-uk&clear=true
for https please change the port to 9002.
Note: I've found several questions similar on here, but the one's that were resolved did not work for me. So I thought I'd open a new question.
I rebooted our server 2012 box, which hosts our new .net applications. After doing so, I started receiving a 503 error. Upon investigation, it seemed like an identity problem.
Before going much further, I should state that this account has worked for several months now. I've rebooted before, and everything started fine.
So I'm getting the (quite common) 5059, 5057, and 5021 errors in the log. They boil down to this:
The identity of application pool SVFileUpload is invalid. The user name or password that is specified for the identity may be incorrect, or the user may not have batch logon rights. If the identity is not corrected, the application pool will be disabled when the application pool receives its first request. If batch logon rights are causing the problem, the identity in the IIS configuration store must be changed after rights have been granted before Windows Process Activation Service (WAS) can retry the logon. If the identity remains invalid after the first request for the application pool is processed, the application pool will be disabled. The data field contains the error number.
I thought I would just ensure the password and account were correct, so I go to the application pool, select identity-> custom and ensure it's set up right. I get an error:
There was an error while performing this operation. Details: Keyset does not exist (Exception from HRESULT: 0x80090016)
This was strange to me, so I tried setting the app pool to a built in account, and it worked fine. I get this error anytime I try to set to a custom account. Also, no app pools that are using custom accounts will run.
I googled a bit, unsure which error was the one I needed to track. I have tried:
registering the account on the command line via the aspnet_ tool
Making sure the user was in the IIS_IUSRS group
changing the permissions on C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys file(s)
adding a completely new user and trying to set an app pool to that users account
There was a couple other random things I tried from googling but I don't remember.
This error doesn't make sense to me, and it seems random. I need help figuring out 1) why I can't set an app pool to a custom account and 2) why the identity isn't working for my applications anymore
-Edit
I recently removed and re-added the user account I've been working with. I think that solves that problem. The problem remaining is I can't update the application pool because of the "keyset does not exist" error.
I found a couple of links that led me to a solution.
In c:\windows\system32\inetsrv\config\applicationHost.config I removed all the configProtectedData entries.
Then I removed everything in %ALLUSERSPROFILE%\Microsoft\Crypto\RSA\MachineKeys
I ran iissetup.exe /install SharedLibraries from the inetsrv directory, which resulted in a "Failed = 0x80070005"
I then was able to set up my application pools as if nothing happened.
See also https://techcommunity.microsoft.com/t5/IIS-Support-Blog/Keyset-does-not-exist-exception-from-HRESULT-0x8009000D-or-or/ba-p/342955 for a more detailed explanation
I ran the iisreset command and my problem was sovled
I had the same error-message because my user was not member of the "Local Administrators" group.
I was able to connect to the server because I was member of the "Remote Desktop Users" group.
I was able to open IIS Management and to change settings, but when I clicked on the "OK" or "Save" button - I got the "Keyset does not exist" - error message.
So my advice - check if you are an administrator.
I tried to change the Identity of Application Pool on a remote server and it failed with the above error.
I RDP into the remote machine and then tried to update the Identity using local IIS Manager and it worked.
For anyone on Windows server 2008 stumbling into this error:
this may occur when you are managing the IIS instance from another server using the remote management feature ('connect to another computer').
I resolved by managing the IIS instance from the server itself.
https://support.microsoft.com/en-hk/help/977754/-keyset-does-not-exist-error-message-when-you-try-to-change-the-identi
Since I am working on a fresh server I was able to uninstall the IIS Windows Feature and then re-add it.
I was able to change the App Pool Identity after that with no issues.
delete the rsa found here C:\Users\usernamn\AppData\Roaming\Microsoft\Crypto\RSA
MAKE A BACKUP JUST TO BE SURE WORKED FOR ME
OK, I've created an Azure Mobile Services project in Visual Studio 2013.
I run it up as-is, then in the browser I test it by adding a todo item via the simple browser app that seems to get baked into these service projects. It gives me a '201 success' message - brilliant.
I then convert the project from IIS Express to Local IIS as the web host, recompile and try again, and although I get the same smiley face app telling me that everything is OK, when I try and add a todo item I get a 404 error. This is contrary to the Microsoft article that gives these instructions, which clearly says I am able to choose either IIS Express or Local IIS when setting up the project.
My guess is that web.config is missing something when this project runs on the local IIS server.
I'm hoping someone already has a solution before I spend hours trying to work out how to configure IIS for this type of project.
I've already wasted a load of time working through loads of bugs and gotchas with Azure Mobile, and I'm starting to run out of steam - so I'm hoping someone can help me before I go and grab an account at Parse.com
Many thanks in anticipation.
Dean
The easiest approach for your situation might be to just deploy to the cloud, and use that service for your testing. Visual Studio 2013 Update 2 makes it easy to deploy your app and connect to it for remote debugging. It is a little slower than using a local instance, but you are also assured that there will be no surprises when you eventually go live (since you are live the whole time).
That said, we will investigate the issue you are seeing with using IIS directly. Some things you might want to try on your own:
Verify that you can view the web side from your Mac's browser, to make sure that the firewall is letting the requests through.
Try using the "Getting Starting" link from the smiley-face page, to see if the REST endpoints are behaving correctly.
I've just created two Windows VM's in Azure, one 2012 Datacenter and a 2008 R2 SP1 and i am not able to connect via remote desktop to either of them. Both machines are running under the same cloud service and the RDP ports are mapped to two distinct public ports. Every time i try to connect i get the error message "The logon attempt failed".
Using NMAP in a Linux VM i also have there, i was able to check that the port 3389 is OPEN in both machines. Also, the public RDP ports respond correctly (e.g. are open).
I tried to enter using two different Windows 7 client machines, also with no lock. MSTSC version is 6.3.9600.16415, in both machines. I've used both the .rdp file, downloaded from the "Connect" option in the windows azure dashboard and a brand new RDP connection created by me - same result.
I've tried also to upgrade the VM size from small (1 core, 1.5 GBRam) to medium (2 cores, 3.6 GBRam), restart, setup a new clean windows VM, with different credentials... nothing changed, same result.
The really odd thing is that i was able to connect, after several failed attempts, to one of the VM's, the 2012 one, but only one time - after that, no luck, always "The login attempt failed".
What worked for me was changing the RDP login screen to use a different account, and use the "local account" which is the name of the VM and the username, like so:
TheVMName\TheAdminUsername
Where TheVMName is the name of your VM, and TheAdminUserName is the admin user name you used for that machine.
I was able to find/confirm the latter on the Reset Password screen under the SUPPORT + TROUBLESHOOTING section on the left.
Since Windows 10, you need the domain is automatically set to MicrosoftAccount followed by your email address as username. MicrosoftAccount\My#UserName.com
Instead, the username is like UserName.com\My.
This worked for me.
I have no idea why, but the solution is simple (works every time, at least for me): I was copy-pasting the passwords from a KeePass, as i use this to generate and maintain the huge amount of credentials i use one way or another.
SOLUTION: instead of copy-paste, type the password
The drawback is that i have to use simpler passwords for this access
I've tried to login and failed using windows 8.1 Pro to an azure vm. The message I got repeatedly was "Login Attempt Failed". So my specific problem wasn't that i couldn't connect to the machine but that it couldn't authenticate...even though my my Administrator username and password were correct.
The way I logged into the machine was to provide the host name then the username:
Host\Username
My Azure account did not have a domain controller setup.
It was simply looking for it's local host machine name.
This link helped: https://azure.microsoft.com/en-us/documentation/articles/virtual-machines-log-on-windows-server/
May be following can help:
In this screen please select the option "Use a different account":
Further type in "Domain\Username"
TIPS:
- The "Domain" can be found on the "Overview" page for your VM in Azure. It's appearing as:
Public IP Address: [SomeIPValue].
- If you do not remember or have "Username" & "Password".The local admin "Username" & "Password" can be set to get access under:
Azure -> Your VM page -> Support + Troubleshooting -> Reset Password.
I've had a similar problem and it turned out that my password wasn't complex enough.
It was really confusing that Azure Portal even let me create a VM with such a password.
It was resolved by going to the VM page -> Support + Troubleshooting -> Reset Password and specifying a more complex password (both case letters, numbers, special characters and doesn't contain username).
Thanks to Jagjit Singh whose answer pointed me in the right direction. Hope this helps somebody.
I found that, while creating VM, if we put password without any special characters, then it still accepts the password but the login to the VM will fail using that password. It gives an error "The logon attempt failed".
It may work after the "Reset password" option but sometimes it shows "Failed to reset password".
So better to put a proper password.
I know this question is too old, answering for new visitors.
Easy solution would be, you can try to add new user or reset the password from Azure Portal
This will add the user if it does not exist, and you can try logging in with new account.
Issue : "The logon attempt failed". ( Windows azure Machine)
I have tried multiple option didn't help, hence updating this as correct answer , it worked for me .
Solution :- While creating the password/updating for windows azure vm create the password as recommended by Azure with prescribed. Main issue with password .
Steps as below for Issue fix.
Once logged in Azure portal, click on VM windows machine , go to (Support and Troubleshoot)
update the password as recommended by Azure as below
(Password must have 3 of the following: 1 lower case character, 1 upper case character, 1 number, and 1 special character.)
Password :- updated as 13 char which include 1 Capital, Lower Case and Special ,1 number .
Password:- Azureuser#123
After updating the password as Microsoft Suggested it worked for me and able to connect windows machine as below
Able to connect as below
Try about method it should work, if issue please suggest.
We need to have strong password when we create user account for VM ..
It was annoying when I encountered this.I was only succeed when I reset my password step. Issue with portal allows is to create week password while creating VM and validation rules are different while RDP to using week password.Same validation rules applies when we re-setting password.
I was running my application with no errors locally, but when added Windows Azure project, set up the database config, generated the packages and ran in stage mode, I just can get 500 internal errors.
My app has some redirections for logged and non logged users.
I tried to follow some answers about the problem with no results. When I run the application locally with the emulator everything runs ok.
I didn't set any permission or user anywhere in my SQL or Windows Azure panel. As I don't have any experience with Windows Azure, please explain steps on how to do things =)
Now, after reading almost 20 articles, I realized that I was using the old Membership and Session Providers, and that the old aspnet_regsql doesn't fit Windows Azure.
So, the first action of my application was watch if the user was logged in. Because of that, the 500 Internal errors.
Articles that helped me a lot:
http://geekswithblogs.net/ranganh/archive/2011/06/21/using-the-asp.net-membership-api-wish-sql-server--sql.aspx
http://www.hanselman.com/blog/IntroducingSystemWebProvidersASPNETUniversalProvidersForSessionMembershipRolesAndUserProfileOnSQLCompactAndSQLAzure.aspx