I have to manage a lot of information in Excel. I have two spreadsheets in one workbook. The first one shows different names on the second row (Abasolo TAMPS 1, Abasolo TAMPS 10, etc) and the second one shows also names (Column A) but next to them there are also some parameters like Wind Speed, Distance, X and Y (Column B). Does any one know how to programm in VBA a way to tell Excel to take the first value on the column A (Say Abasolo, TAMPS 17) on the second spreadsheet (image of the right), look them up in the second row of the first spreadsheet (image on the left), take the set of parameters next to the name and insert them on row 11 and the intersecting column on the first spreadsheet (image of the left, where the "2's" are). That for all the values on column A of the second spreadsheet.
You can VLOOKUP to achieve this.
Sheet 2 parameters
Sheet 1 VLookup
I used the function
=VLOOKUP(B$4,Sheet2!$A$2:$B$3,2,FALSE)
in Cell B6 on sheet1.
To maintain line breaks, you will need to ensure wrap text is used for the destination cells as shown below
You can read more about VLOOKUP here.
VLOOKUP
Related
Is there a way in excel to copy the contents of one column to another sheet based on particular values in another column.
I have data which looks like this:
Sheet1:
Sheet2:
I would like to copy the column A of sheet 1 directly onto column A of sheet 2, but only if the value in column B is Y.
I have tried used the match function but am not sure how the best way to do this would be. Is there a way for me to achieve this?
My desired output is:
As discussed in the comments, #Waldorf99 was looking to have a second worksheet that would automatically show a filtered list from the first sheet. I can think of a few ways to do this (array formulas or pivot tables come to mind). The problem with mixing dynamic columns with static values is that the static values would become desynced from the dynamic ones.
In the original example, rows may have a blank value in the condition column in sheet one, and then may be assigned a Y or N at a later date. If a Y is assigned to a row in the middle of other rows, the filtered sheet would shift the existing rows down to make room. The static values would stay where they were, and would become desynced. To demonstrate:
If the above image is the original state of sheet 1 and 2...
...adding a y next to x.1.c would result in sheet two shifting columns A and B of row 2 down, but leaves columns C and D behind (as they are static, and not tied into the first two columns in any way).
One thing that may work as you are wanting are filters. You would only have one sheet, with all of the data manually entered. Then you can add filters, and change them to hide rows temporarily when needed.
To add and use filters:
Start with your data all on one sheet...
Highlight your data...
On the Home tab, select "Format as Table" and choose any style...
This turns your data into a table. You can filter by clicking the drop down in a given columns header row, then deselecting the values you want to hide.
The results are a table that only shows the rows with a 'Y'.
The other rows aren't removed, just hidden. You can always reset or change your filters, to configure which rows are visible.
Note: when working with tables, they will auto expand to account for new rows, so long as you work in the row directly under the table (e.g. don't leave blank rows). You can also manually resize the table at any time by clicking and dragging from the bottom right corner of the table.
There are tons of resources of Excel tables online, and it's a pretty useful tool in Excel.
Hope that achieves what you were looking for.
I'm fairly new to coding and i've been googling around for the last few hours trying to solve this problem but it seems to be a little beyond what i'm able to do so i would be very grateful for some help
In Sheet1, I have a table which has columns between M - CV (175 columbs). For each column, i have an "ID number" value in row 3. From Row 6 to the end of the table, i have several "search terms" separated by commas in the column CV
In Sheet2, the corresponding "ID Numbers" are in column B. Column AN contains strings.
For each ID Number value in sheet1, i'm looking to find find all the corresponding cells in sheet2 where the ID number in Column B is the same, and Column AN of sheet2 contains at least one of the "search terms" in column CV
For each ID number, i'm hoping to join the entries in Column AN of sheet2 which match the criteria above and paste them into Row 5 of the respective column in Sheet1
I've gone around in quite a few circles trying to do this and i'm back to square 1 with no code to show for it.
I've tried to research both the autofilter function, and using for loops. The research i've done indicates that for loops are rather slow to run for a large data set.
I'm hoping to find a solution which is as easy to read and understand as possible
I hope i've given enough information for everyone to understand and help
THank you in advance
My Excel subscription has expired an I've started using Google Sheets for most of my spreadsheet work, so I tested this there. Some conversion may be required. I did this using formulas, not VBA also, not sure if that changes things for you.
If I understand correctly, you have two sheets with a shared key column, sheet 1 contains search terms across multiple columns, and sheet 2 contains search terms comma delimited in a single column.
With this setup we want to bring the search term column of sheet 2 into the correct row of sheet 1 by key using VLOOKUP. I made a named range in sheets which contained all my data on sheet 2 and called it "dst". My formula was then =VLOOKUP(A2, dst, 7, true) since my key in sheet 1 was in column A, dst was the range I was searching, my column with my delimited search terms was column 7 in relation to dst, and I had ordered sheet 2 by key. I pasted this formula relatively down all rows as needed.
We want to construct a regex string using our search terms across multiple columns in sheet 1, into a single cell. I used =JOIN("|", B2:E2) on sheet 1 since my search terms were in columns B:E, and this resulted in a regex that looked like this for me: alligator|dog|rabbit|lizard where alligator, dog, rabbit, and lizard, were all search terms in that row. Paste down relative as needed.
We want to run our regex against our search target cell containing the comma delimited search terms. I ran =REGEXMATCH(F2, G2) where F2 was my delimited search terms from sheet 2, and G2 was my constructed regex for the row. Paste down relative as needed.
A screenshot of my completed sheet 1:
Once you know which cells have matches you can do whatever you want.
I am currently automating a dashboard creation and I've hit a bit of a roadblock. I need some code that will go through about 7000 rows of data and return the highest value in a certain column for each specific item. The data is copied from a pivot table and so is broken down into row sections, I have attached a mock of what it looks like.
I need the highest value in Column G for each portfolio, and will need to use the portfolio code (e.g. XY12345 - They are always 7 characters) to map that value to the dashboard.
My issue is, each portfolio has a different number of rows for the values, and some have blank cells between them, and therefore I am stumped. I was hoping to use Column J to count the number of rows for each portfolio (as there are no breaks for the portfolios in this column) and then use a loop to loop through each portfolios rows of values, based off the Column J count, and then return the highest row value for each portfolio. Problem is I'm new to VBA and have been teaching myself as I go, and I've yet to use a loop.
Many thanks,
Harry
If I understand correctly, you're looking for the largest value in Column G.
I'm not sure why you think you would need VBA for this.
Get the maximum value of a column
You mentioned that you're concerned about each column not having the same number of cells but that's irrelevant. as SUM ignores blank cells, so just "go long", or - find the maximum of the entire column.
To return the largest number in Column G you could use worksheet formula :
=MAX(G:G)
The only catch is that you can't place that formula anywhere column G or else it would create a circular cell reference (trying to infinitely add a number to itself). let's pit that formula in cell F1 for now (but anywhere besides column G would do fine).
Find the location of a value
Now that you know the largest value, you can determine where it is using a lookup function such as MATCH or VLOOKUP. Like with so many things in Excel, there are several ways to accomplish the same thing. I'll go with MATCH.
Replace the formula from above (in F1) with:
=MATCH(MAX(G:G),G:G,0)
This will return the row number of the first exact match of the maximum value of Column G.
As for the third part of question: returning the code like X12345 where the value exists, will be a little tricky since your data is not organized in a logical tabular style (tabular meaning, "like a table").
Your data is organized for humans to look at, not for machines to easily read and manipulate it. (See: Office Support: Guidelines for organizing and formatting data on a worksheet)
Basically, when organizing data in rows, all relevant information should be on the same row (not a subjective number of rows behind). Also, you have the number combined with other information.
My suggestion for a quick fix:
Right-click the heading of Column C and choose Insert to insert a blank column.
In C2 enter formula: =IF(B2="",C1,LEFT(B2,7))
Copy cell C2
Select cells in column C all the way to the "end" of your data, where ever that is (not the end of the worksheet). For example maybe you would select cells B2:B1000)
Paste the copied cell into all those cells.
Now, you can again modify the formula in F1:
=INDEX(C:C,MATCH(MAX(G:G),G:G,0))
This will return the value from Column C in the same row that the maximum value of Column G is located.
This is known as an INDEX/MATCH formula.
Hopefully this works for you in the interim until you can organize your data more logically. There's lots of related information and tutorials online.
I'm attempting to check one list of roadways (each has a unique identifier) against a separate list in Excel. If that roadway on the first list is present on the second I then want to see if it also falls within the milepoints on the second list (for both lists I have a column with for the beginning milepoint and a column for the ending milepoint).
The formula (located in cell CC3) I have that is checking for the roadway on the second list is this:
=IF(ISNA(VLOOKUP('Sheet1'!CA3,'Sheet2'!Y:Y,1,FALSE)),"",VLOOKUP('Sheet1'!CA3,'Sheet2'!Y:Y,1,FALSE))
I'm attempting to write a formula in another column that will check to see if the milepoints from the first sheet fall within the milepoints on the second sheet. Here is the formula for that:
=IF(AND(CC3<>"",F3>='Sheet2'!F2,G3<='Sheet2'!G2),"YES","")
Column F is the beginning milepoint and Column G is the ending milepoint on both sheets.
I realized that this formula isn't doing what I want since the second and third logic tests are simply looking at those respective cells on Sheet 2, not at the Column F & G values on the same row where it found the matching roadway unique identifier. How would I go about fixing this? I can seem to reason my way through it. Thanks for any help you can provide!
I am trying to assemble a index/match combination and am having trouble figuring out how to make it work. I have experience with a lot of the formula types in excel, but unfortunately I am pretty ignorant when it comes to these functions.
I will explain what I am trying to do first, but I have attached 3 images at the end that will probably make things more clear.
In order to identify the specific values I want, I am having to use helper cells. These helper cells are denoted with the (helper) tag in the pictures. These cells go through and grab the adjusted closing price of the stock (column A) at the beginning (column C) and the end (Column D) of a dynamically calculated period.
I would like to consolidate these values into numerical order in columns F and G. The thought is that the first non zero number in C/D is belongs to the first predefined period and should go into columns F/G beside the #1 (column E). This gets carried on through all of the periods (ex: 2nd non zero goes beside the number 2, third nonzero number goes beside the number 3 etc.)
This is just an example of one stock. I need the function or formula to be dynamic enough to work on a wide variety of distributions. Sometimes there are up to 100 dynamically calculated periods within the stock analysis.
Below are the images that should provide more clarity
Image 1 is an example of what the data looks like
Image 2 is a crudely drawn example of how I would like the data to move
Image 3 is the desired result
Image 1
Image 2
Image 3
Updated image for Scott Craner showing out of order results
Please let me know if I can clarify any confusion.
If you just need to return the first value of each period (column C) and the last value of each period (column D), you could use index match and lookup to do this without even using helper columns.
Try this in cell F2
=INDEX(A2:A50,MATCH(E2,B2:B50,0))
And this in cell G2
=LOOKUP(E2,B2:B50,A2:A50)
Depending on much variance is in your overall number of rows, you could use indirect references in the formulas to dynamically update the ranges.
Example:
=INDEX(A2:INDIRECT("A"&COUNTA(A:A)),MATCH(E2,B2:INDIRECT("B"&COUNTA(A:A)),0))
You will need to open macro. Then do the following in recorded macro.
+ Filter only non-null value in C/D
+ Select whole column in C/D then copy the whole column
+ Turn off Filter
+ Paste the whole C/D in F/G
+ Stop macro
Gook Luck
Put this formula if F2:
=INDEX(INDEX(C:C,MATCH($E2,$B:$B,0)):INDEX(C:C,MATCH($E2,$B:$B,0)+COUNTIF($B:$B,$E2)-1),MATCH(1E+99,INDEX(C:C,MATCH($E2,$B:$B,0)):INDEX(C:C,MATCH($E2,$B:$B,0)+COUNTIF($B:$B,$E2)-1)))
Copy over one column and down the list.