Related
The . key can be used to repeat the last insert command. However, we might do some navigation that is not part of the insert, but we want it repeated.
Imagine commenting out lines like so:
// line of text
// line of text
line of text
line of text
The insert command is to put the two forward slashes and a space. That can be repeated using the . key. The navigation would be to navigate down one line and then left some number of characters. That part is not captured by the . key command.
How can we achieve this functionality? I read that it was not available in Vi some years ago, but I'm wondering if it exists now in the latest version of Vim.
Press qX, where X is any of the writable registers (typically: pick any lowercase letter).
Do whatever actions you want to record.
Press q again to stop recording.
Press #X (where X is the same register) to play it back (count times, if used with a count).
Press ## to replay the most recently used macro (count times).
I read that it was not available in Vi some years ago, but I'm wondering if it exists now in the latest version of Vim.
If the Vim docs are to be believed, Vi did not support recording (steps 1-3), but did support #. Then you would have to manually yank the characters into the target register with "Xy<motion> or some other register-writing command. That also works under Vim, but I can't recommend it because it is much more error prone.
Another approach would be "block select then edit" approach:
ctrl + v - block select
then go down j or down-arrow
shift + i will put you in insert mode. Make the change here where you want it to be reflected on all the other lines you've selected.
esc twice will show/repeat that change you made on the line one.
If you have a big range of similar lines and want to put // at the beginning of it, you can do something like:
:15,25norm! I//<space>
You can also use visual area (vip selects an entire paragraph)
:'<,'>norm! I//<space>
using a pattern
:g/TODO/norm! I//<space>
I want to wrap some code :
myObj.text;
with a function call where the code is passed as an argument.
console.log(myObj.text);
I've thought about using surround.vim to do that but didn't manage to do it.
Any idea if it's possible ? I
With Surround in normal mode:
ysiwfconsole.log<CR>
With Surround in visual mode:
Sfconsole.log<CR>
Without Surround in normal mode:
ciwconsole.log(<C-r>")<Esc>
Without Surround in visual mode:
cconsole.log(<C-r>")<Esc>
But that's not very scalable. A mapping would certainly be more useful since you will almost certainly need to do it often:
xnoremap <key> cconsole.log(<C-r>")<Esc>
nnoremap <key> ciwconsole.log(<C-r>")<Esc>
which brings us back to Surround, which already does that—and more—very elegantly.
I know and use two different ways to accomplish this:
Variant 1:
Select the text you want to wrap in visual mode (hit v followed by whatever movements are appropriate).
Replace that text by hitting c, then type your function call console.log(). (The old text is not gone, it's just moved into a register, from where it will be promptly retrieved in step 3.) Hit <esc> while you are behind the closing parenthese, that should leave you on the ) character.
Paste the replaced text into the parentheses by hitting P (this inserts before the character you are currently on, so right between the ( and the )).
The entire sequence is v<movement>c<functionName>()<esc>P.
Variant 2:
Alternatively to leaving insert mode and pasting from normal mode, you can just as well paste directly from insertion mode by hitting <ctrl>R followed by ".
The entire sequence is v<movement>c<functionName>(<ctrl>R")<esc>.
You can use substitution instruction combined with visual mode
To change bar to foo(bar):
press v and select text you want (plus one more character) to surround with function call (^v$ will select whole text on current line including the newline character at the end)
type :s/\%V.*\%V/foo\(&\)/<CR>
Explanation:
s/a/b/g means 'substitute first match of a with b on current line'
\%V.*\%V matches visual selection without last character
& means 'matched text' (bar in this case)
foo\(&\) gives 'matched text surrounded with foo(...) '
<CR> means 'press enter'
Notes
For this to work you have to visually select also next character after bar (^v$ selects also the newline character at the end, so it's fine)
might be some problems with multiline selections, haven't checked it yet
when I press : in visual mode, it puts '<,'> in command line, but that doesn't interfere with rest of the command (it even prevents substitution, when selected text appears also somewhere earlier on current line) - :'<,'>s/... still works
Frequently when I am doing a find and replace in vi I will do it like this:
:%s/find/replace/gc
This gives you the option to skip by pressing n, or replace by pressing y. But, sometimes I will accidentally skip over one in a large file by pressing n when I meant to press y.
How do I go backwards to the previous one and give me a second change?
Essentially, how to I find (search) the other direction temporarily? thanks.
I'm not sure if you would like to interrupt current find-replace operation and resume it again. But if that is acceptable, here is my suggestion:
Start your find-replace the way you mentioned:
:%s/find/replace/gc
After you accidentally skip over a substitution by pressing n, interrupt the search by pressing <ctrl-C>
Press <shift-N> to go back to the previous occurrence of your find term
Run find-replace a little differently while you are at this word: :.,$s/find/replace/gc
Continue the operation
All this functionality works with vim native capabilities without having to install any addon.
Note: The .,$ range specifier indicates to perform :s (substitute) operation over a range of lines that start with current line (indicated by .) and until last line (indicated by $).
Note2: It might be known to you, but reiterating for anyone else who stumbles upon this post searching for something similar - The % range specifier indicates to perform :s (substitute) operation over all lines of currently active buffer.
This is not answer to the question, but a very good alternative. I recently discovered the CtrlSF plugin and it improves the search /replace process dramatically.
Basically, you have the search results in a buffer and you can do all the replacements in this single buffer.
In your scenario, you first do :CtrlSF find, get a buffer with all the matches in all files and then you do /find and move with n over your targets and change them (of course, you can actually change only the first one and then repeat the replacement with .).
If you miss some target, you just hit N to go back to the previous result and replace it.
Seems like you can't back to previous match using this pattern. Appeared bar propose following commands y/n/a/q/l/^E/^Y but no one of them will return backward to previous match.
But you can use little different pattern described bellow:
Type this /pattern replacing pattern with interested word;
Your cursor is navigated to first occurrence, if you don't need to change it press n it will navigates you to the next occurrence;
Since you understand you need to replace a word, do this by typing cw, this command cuts the forward word and turns you to insertion mode;
Type in desired text on the released place and press ESC to switch back to command mode;
Now again press n until desired occurrence;
Since you realize that you need to change an occurrence, just press on . it will repeat previously mentioned actions;
If you want to go back just use N.
In Unix the ^ allows you to repeat a command with some text substituted for new text. For example:
csh% grep "stuff" file1 >> Results
grep "stuff" file1
csh% ^file1^file2^
grep "stuff" file2
csh%
Is there a Vim equivalent? There are a lot of times I find myself editing minor things on the command line over and over again.
Specifically for subsitutions: use & to repeat your last substitution on the current line from normal mode.
To repeat for all lines, type :%&
q: to enter the command-line window (:help cmdwin).
You can edit and reuse previously entered ex-style commands in this window.
Once you hit :, you can type a couple characters and up-arrow, and it will character-match what you typed. e.g. type :set and it will climb back through your "sets". This also works for search - just type / and up-arrow. And /abc up-arrow will feed you matching search strings counterchronologically.
There are 2 ways.
You simply hit the . key to perform an exact replay of the very last command (other than movement). For example, I type cw then hello to change a word to "hello". After moving my cursor to a different word, I hit . to do it again.
For more advanced commands like a replace, after you have performed the substition, simply hit the : key then the ↑ up arrow key, and it fills your command line with the same command.
To repeat the previous substition on all lines with all of the same flags you can use the mapping g&.
If you have made a substitution in either normal mode :s/A/B/g (the current line) or visual mode :'<,>'s/A/B/g (lines included in the current selection) and you want to repeat that last substitution, you can:
Move to another line (normal mode) and simply press &, or if you like, :-&-<CR> (looks like :&), to affect the current line without highlighting, or
Highlight a range (visual mode) and press :-&-<CR> (looks like :'<,'>&) to affect the range of lines in the selection.
With my limited knowledge of Vim, this solves several problems. For one, the last visual substitution :'<,'>s/A/B/g is available as the last command (:-<UP>) from both normal and visual mode, but always produces an error from normal mode. (It still refers to the last selection from visual mode - not to the empty selection at the cursor like I assumed - and my example substitution exhausts every match in one pass.) Meanwhile, the last normal mode substitution starts with :s, not :'<,'>s, so you would need to modify it to use in visual mode. Finally, & is available directly from normal mode and so it accepts repetitions and other alternatives to selections, like 2& for the next two lines, and as user ruohola said, g& for the entire file.
In both versions, pressing : then & works as if you had pressed : and then retyped s/A/B/, so the mode you were in last time is irrelevant and only the current cursor line or selection determines the line(s) to be affected. (Note that the trailing flags like g are cleared too, but come next in this syntax too, as in :&g/: '<,'>&g. This is a mixed blessing in my opinion, as you can/must re-specify flags here, and standalone & doesn't seem to take flags at all. I must be missing something.)
I welcome suggestions and corrections. Most of this comes from experimentation just now so I'm sure there's a lot more to it, but hopefully it helps anyway.
Take a look at this: http://vim.wikia.com/wiki/Using_command-line_history for explanation.
Selecting a large amount of text that extends over many screens in an IDE like Eclipse is fairly easy since you can use the mouse, but what is the best way to e.g. select and delete multiscreen blocks of text or write e.g. three large methods out to another file and then delete them for testing purposes in Vim when using it via putty/ssh where you cannot use the mouse?
I can easily yank-to-the-end-of-line or yank-to-the-end-of-code-block but if the text extends over many screens, or has lots of blank lines in it, I feel like my hands are tied in Vim. Any solutions?
And a related question: is there a way to somehow select 40 lines, and then comment them all out (with "#" or "//"), as is common in most IDEs?
Well, first of all, you can set vim to work with the mouse, which would allow you to select text just like you would in Eclipse.
You can also use the Visual selection - v, by default. Once selected, you can yank, cut, etc.
As far as commenting out the block, I usually select it with VISUAL, then do
:'<,'>s/^/# /
Replacing the beginning of each line with a #. (The '< and '> markers are the beginning and and of the visual selection.
Use markers.
Go to the top of the text block you want to delete and enter
ma
anywhere on that line. No need for the colon.
Then go to the end of the block and enter the following:
:'a,.d
Entering ma has set marker a for the character under the cursor.
The command you have entered after moving to the bottom of the text block says "from the line containing the character described by marker a ('a) to the current line (.) delete."
This sort of thing can be used for other things as well.
:'a,.ya b - yank from 'a to current line and put in buffer 'b'
:'a,.ya B - yank from 'a to current line and append to buffer 'b'
:'a,.s/^/#/ - from 'a to current line, substitute '#' for line begin
(i.e. comment out in Perl)
:'s,.s#^#//# - from 'a to current line, substitute '//' for line begin
(i.e. comment out in C++)
N.B. 'a (apostrophe-a) refers to the line containing the character marked by a. ``a(backtick-a) refers to the character marked bya`.
To insert comments select the beginning characters of the lines using CTRL-v (blockwise-visual, not 'v' character wise-visual or 'V' linewise-visual). Then go to insert-mode using 'I', enter your comment-character(s) on the first line (for example '#') and finally escape to normal mode using 'Esc'. Voila!
To remove the comments use blockwise-visual to select the comments and just delete them using 'x'.
Use the visual block command v (or V for whole lines and C-V for rectangular blocks). While in visual block mode, you can use any motion commands including search; I use } frequently to skip to the next blank line. Once the block is marked, you can :w it to a file, delete, yank, or whatever. If you execute a command and the visual block goes away, re-select the same block with gv. See :help visual-change for more.
I think there are language-specific scripts that come with vim that do things like comment out blocks of code in a way that fits your language of choice.
Press V (uppercase V) and then press 40j to select 40 lines and then press d to delete them. Or as #zigdon replied, you can comment them out.
The visual mode is the solution for your main problem. As to commenting out sections of code, there are many plugins for that on vim.org, I am using tComment.vim at the moment.
There is also a neat way to comment out a block without a plugin. Lets say you work in python and # is the comment character. Make a visual block selection of the column you want the hash sign to be in, and type I#ESCAPE. To enter a visual block mode press C-q on windows or C-v on linux.
My block comment technique:
Ctrl+V to start blockwise visual mode.
Make your selection.
With the selection still active, Shift+I. This put you into column insert mode.
Type you comment characters '#' or '//' or whatever.
ESC.
Or you may want to give this script a try...
http://www.vim.org/scripts/script.php?script_id=23
For commenting out lines, I would suggest one of these plugins:
EnhancedCommentify
NERD Commenter
I find myself using NERD more these days, but I've used EnhancedCommentify for years.
If you want to perform an action on a range of lines, and you know the line numbers, you can put the range on the command line. For instance, to delete lines 20 through 200 you can do:
:20,200d
To move lines 20 through 200 to where line 300 is you can use:
:20,200m300
And so on.
Use Shift+V to go in visual mode, then you can select lines and delete / change them.
My usual method for commenting out 40 lines would be to put the cursor on the first line and enter the command:
:.,+40s/^/# /
(For here thru 40 lines forward, substitute start-of-line with hash, space)
Seems a bit longer than some other methods suggested, but I like to do things with the keyboard instead of the mouse.
First answer is currently not quite right?
To comment out selection press ':' and type command
:'<,'>s/^/# /g
('<, '> - will be there automatically)
You should be aware of the normal mode command [count]CTRL-D.
It optionally changes the 'scroll' option from 10 to [count], and then scrolls down that many lines. Pressing CTRL-D again will scroll down that same lines again.
So try entering
V "visual line selection mode
30 "optionally set scroll value to 30
CTRL-D "jump down a screen, repeated as necessary
y " yank your selection
CTRL-U works the same way but scrolls up.
v enters visual block mode, where you can select as if with shift in most common editors, later you can do anything you can normally do with normal commands (substitution :'<,'>s/^/#/ to prepend with a comment, for instance) where '<,'> means the selected visual block instead of all the text.
marks would be the simplest mb where u want to begin and me where u want to end once this is done you can do pretty much anything you want
:'b,'ed
deletes from marker b to marker e
commenting out 40 lines you can do in the visual mode
V40j:s/^/#/
will comment out 40 lines from where u start the sequence