i tried to install
1.yum install -zxvf apache-tomcat-6.0.47.tar.gz then
2. export TOMCAT_HOME=/home/mpatil/softwares/apache-tomcat-6.0.37
3. [root#localhost mpatil]# echo $TOMCAT_HOME
/home/mpatil/softwares/apache-tomcat-7.0.47
while starting tomcat by using this command
4.[root#localhost mpatil]# /startup.sh
bash: /startup.sh: No such file or directory
i don't know why it showing like this.
my file in
5.[root#localhost mpatil]# find /home -type f -name apache-tomcat-6.0.37.tar.gz
/home/mpatil/Downloads/apache-tomcat-6.0.37.tar.gz
what i tried before this is is correct or not? --please tell me
my question is how to start a tomcat server in linux.Please tell me..
The command you have typed is /startup.sh, if you have to start a shell script you have to fire the command as shown below:
$ cd /home/mpatil/softwares/apache-tomcat-7.0.47/bin
$ sh startup.sh
or
$ ./startup.sh
Please try that, you also have to go to your tomcat's bin-folder (by using the cd-command) to execute this shell script. In your case this is /home/mpatil/softwares/apache-tomcat-7.0.47/bin.
Use ./catalina.sh start to start Tomcat. Do ./catalina.sh to get the usage.
I am using apache-tomcat-6.0.36.
if you are a sudo user i mean if you got sudo access:
sudo sh startup.sh
otherwise:
sh startup.sh
But things is that you have to be on the bin directory of your server like
cd /home/nanofaroque/servers/apache-tomcat-7.0.47/bin
I know this is old question, but this command helped me!
Go to your Tomcat Directory
Just type this command in your terminal:
./catalina.sh start
cd apache-tomcat-6.0.43 ====: Go to Tomcat Directory
sh bin/startup.sh =====: Start the tomcat on Linux
sh bin/shutdown.sh ======:Shut Down the tomcat on Linux
tail -f logs/catelina.out ====: Check the logs
Go to your Tomcat Directory with : cd/home/user/apache-tomcat6.0
sh bin/startup.sh.>> tail -f logs/catelina.out.>>
Go to the appropriate subdirectory of the EDQP Tomcat installation directory. The default directories are:
On Linux: /opt/server/tomcat/bin
On Windows: c:\server\tomcat\bin
Run the startup command:
On Linux: ./startup.sh
On Windows: % startup.bat
Run the shutdown command:
On Linux: ./shutdown.sh
On Windows: % shutdown.bat
To run Apache Tomcat server in Linux following ways can be used. Let me share the difference as well since I see some got confusions with the multiple ways Apache Tomcat Server can be started.
The catalina.sh is the main control script for Tomcat. Following are the multiple ways of running tomcat:
./catalina.sh run
Passing "run" argument for catalina.sh --> starts the Tomcat in the foreground and displays the running logs in the same console. when the console terminal is closed it will terminate the tomcat.
./catalina.sh start
Passing "start" argument for catalina.sh --> starts the Tomcat in the background. Since in background no issues closing down the terminal. The logs need to be viewed as below: tail -f $CATALINA_HOME/logs/catalina.out
./startup.sh
The last way is firing the startup.sh to start your Tomcat server. If you Vi the script you can see it calls catalina.sh script passing start as the argument. This will be running in background as well.
Related
I am trying to run a shell script which runs at system login. To try, I used an example script, which has two lines
#!/bin/bash
echo “Hello World”
I Followed all the instructions mentioned on this website http://www.cyberciti.biz/tips/linux-how-to-run-a-command-when-boots-up.html
Even I did some steps such as editing /etc/rc.local, but still when I login, I do not see Hello world output running on terminal.
Can anyone please explain what is wrong here or may be I am missing something?
Looks to me like Ubuntu 16.04 is a systemd system.
Which means you should create a systemd service to run whatever you'd like # startup.
Look here https://wiki.ubuntu.com/SystemdForUpstartUsers#Example_Systemd_service
After you made your service, use systemctl to enable it on boot for systemd.
sudo systemctl enable mycustom.service
To start the service.
sudo systemctl start mycustom.service
You can also schedule a cron job to run once after the reboot command. The line will need "#reboot root /path/script.sh" You can specify whatever user you want to run the script. To make the result easier to find, you might make that second line something like
echo "Hello World" > /root/hello.txt
Add the line in /etc/profile under echo command as follows
echo “Hello World”
Then execute the following command
source /etc/profile
I'm curious of how su -c "cmd arg" and tomcat works within a shell script.
Manually from the cmd line, I ran:
su -m tomcat -c /path/to/tomcat/catalina.sh start
This didn't work. However, if I put the cmd in quotes, it worked
su -m tomcat -c "/path/catalina.sh start"
Within a shell script (trying to run chkconfig so it starts automatically), I have something like this:
START="/path/catalina.sh start"
...
...
su -m tomcat -c "$START"
The command is in quotes since I found out manually that quotes are required.
When I run the script, the output comes back as:
Using CATALINA_BASE: /apps/local/apache-tomcat-7.0.42
Using CATALINA_HOME: /apps/local/apache-tomcat-7.0.42
Using CATALINA_TMPDIR: /apps/local/apache-tomcat-7.0.42/temp
Using JRE_HOME: /usr/java/default
Using CLASSPATH: /apps/local/apache-tomcat-7.0.42/bin/bootstrap.jar:/apps/local/apache-tomcat-7.0.42/bin/tomcat-juli.jar
Usage: catalina.sh ( commands ... )
commands:
debug Start Catalina in a debugger
debug -security Debug Catalina with a security manager
jpda start Start Catalina under JPDA debugger
run Start Catalina in the current window
run -security Start in the current window with security manager
start Start Catalina in a separate window
start -security Start in a separate window with security manager
stop Stop Catalina, waiting up to 5 seconds for the process to end
stop n Stop Catalina, waiting up to n seconds for the process to end
stop -force Stop Catalina, wait up to 5 seconds and then use kill -KILL if still running
stop n -force Stop Catalina, wait up to n seconds and then use kill -KILL if still running
configtest Run a basic syntax check on server.xml - check exit code for result
version What version of tomcat are you running?
Note: Waiting for the process to end and use of the -force option require that $CATALINA_PID is defined
This output is like if I manually ran catalina.sh w/o any start/stop arguments. Why is the start/stop option being ignored in the shell script? Yes, I replaced catalina.sh with startup.sh and shutdown.sh and that made the script work but I'm still curious why inside a script, su -c "cmd arg" seemed to ignore the argument portion of the command.
Thanks in advance for your explanation. I'll shoot myself if it's something as easy as shell expansion and quote removal unless I do something to make it not lose the quote.
I use the following in my tomcat init files:
...
su -l $TOMCAT_USER -c $CATALINA_HOME/bin/startup.sh
...
The -l creates a login shell and allows you to pass what you need.
This might be related also with "setenv.sh"
If you created setenv.sh, and have lines starts with "set X=Y", then you will get this problem, because of "set". Remove "set" and try to restart tomcat again.
https://ubuntuforums.org/showthread.php?t=2032330
I am using node's forever module to keep my node server running. Forever however terminates when there is a system restart. Is there any way I can automatically start the node server (with forever) when the system restarts?
I would suggest using crontab. It's easy to use.
How to
To start editing run the following replacing the "testuser" with your desired runtime user for the node process. If you choose a different user other than yourself, you will have to run this with sudo.
$ crontab -u testuser -e
If you have never done this before, it will ask you which editor you wish to edit with. I like vim, but will recommend nano for ease of use.
Once in the editor add the following line:
#reboot /usr/local/bin/forever start /your/path/to/your/app.js
Save the file. You should get some feedback that the cron has been installed.
For further confirmation of the installation of the cron, execute the following (again replacing "testuser" with your target username) to list the currently installed crons:
$ crontab -u testuser -l
Note that in my opinion, you should always use full paths when executing binaries in cron.
Also, if the path to your forever script is not correct, run which forever to get the full path.
Given that forever calls node, you may also want to provide the full path to node:
#reboot /usr/local/bin/forever start -c /usr/local/bin/node /your/path/to/your/app.js
Further Reading
crontab Man Page
Ubuntu Cron HowTo
You can use forever-service for doing this.
npm install -g forever-service
forever-service install test
This will provision app.js in the current directory as a service via forever. The service will automatically restart every time system is restarted. Also when stopped it will attempt a graceful stop. This script provisions the logrotate script as well.
Github url: https://github.com/zapty/forever-service
NOTE: I am the author of forever-service.
Install PM2 globally using NPM
npm install pm2 -g
Start your script with pm2
pm2 start app.js
generate an active startup script
pm2 startup
NOTE: pm2 startup is for startting the PM2 when the system reboots. PM2 once started, restarts all the processes it had been managing before the system went down.
In case you want to disable the automatic startup, simply use pm2 unstartup
If you want the startup script to be executed under another user, just use the -u <username> option and the --hp <user_home>:
This case is valid for Debian.
Add the following to /etc/rc.local
/usr/bin/sudo -u {{user}} /usr/local/bin/forever start {{app path}}
{{user}} replaces your username.
{{app path}} replaces your app path. For example, /var/www/test/app.js
An alternative crontab method inspired by this answer and this blog post.
1. Create a bash script file (change bob to desired user).
vi /home/bob/node_server_init.sh
2. Copy and paste this inside the file you've just created.
#!/bin/sh
export NODE_ENV=production
export PATH=/usr/local/bin:$PATH
forever start /node/server/path/server.js > /dev/null
Make sure to edit the paths above according to your config!
3. Make sure the bash script can be executed.
chmod 700 /home/bob/node_server_init.sh
4. Test the bash script.
sh /home/bob/node_server_init.sh
5. Replace "bob" with the runtime user for node.
crontab -u bob -e
6. Copy and paste (change bob to desired user).
#reboot /bin/sh /home/bob/node_server_init.sh
Save the crontab.
You've made it to the end, your prize is a reboot (to test) :)
Copied answer from the attached question.
You can use PM2, it's a production process manager for Node.js applications with a built-in load balancer.
Install PM2
$ npm install pm2 -g
Start an application
$ pm2 start app.js
If you using express then you can start your app like
pm2 start ./bin/www --name="app"
Listing all running processes:
$ pm2 list
It will list all process. You can then stop / restart your service by using ID or Name of the app with following command.
$ pm2 stop all
$ pm2 stop 0
$ pm2 restart all
To display logs
$ pm2 logs ['all'|app_name|app_id]
You need to create a shell script in the /etc/init.d folder for that. It's sort of complicated if you never have done it but there is plenty of information on the web on init.d scripts.
Here is a sample a script that I created to run a CoffeeScript site with forever:
#!/bin/bash
#
# initd-example Node init.d
#
# chkconfig: 345
# description: Script to start a coffee script application through forever
# processname: forever/coffeescript/node
# pidfile: /var/run/forever-initd-hectorcorrea.pid
# logfile: /var/run/forever-initd-hectorcorrea.log
#
# Based on a script posted by https://gist.github.com/jinze at https://gist.github.com/3748766
#
# Source function library.
. /lib/lsb/init-functions
pidFile=/var/run/forever-initd-hectorcorrea.pid
logFile=/var/run/forever-initd-hectorcorrea.log
sourceDir=/home/hectorlinux/website
coffeeFile=app.coffee
scriptId=$sourceDir/$coffeeFile
start() {
echo "Starting $scriptId"
# This is found in the library referenced at the top of the script
start_daemon
# Start our CoffeeScript app through forever
# Notice that we change the PATH because on reboot
# the PATH does not include the path to node.
# Launching forever or coffee with a full path
# does not work unless we set the PATH.
cd $sourceDir
PATH=/usr/local/bin:$PATH
NODE_ENV=production PORT=80 forever start --pidFile $pidFile -l $logFile -a -d --sourceDir $sourceDir/ -c coffee $coffeeFile
RETVAL=$?
}
restart() {
echo -n "Restarting $scriptId"
/usr/local/bin/forever restart $scriptId
RETVAL=$?
}
stop() {
echo -n "Shutting down $scriptId"
/usr/local/bin/forever stop $scriptId
RETVAL=$?
}
status() {
echo -n "Status $scriptId"
/usr/local/bin/forever list
RETVAL=$?
}
case "$1" in
start)
start
;;
stop)
stop
;;
status)
status
;;
restart)
restart
;;
*)
echo "Usage: {start|stop|status|restart}"
exit 1
;;
esac
exit $RETVAL
I had to make sure the folder and PATHs were explicitly set or available to the root user since init.d scripts are ran as root.
Use the PM2
Which is the best option to run the server production server
What are the advantages of running your application this way?
PM2 will automatically restart your application if it crashes.
PM2 will keep a log of your unhandled exceptions - in this case, in a file at /home/safeuser/.pm2/logs/app-err.log.
With one command, PM2 can ensure that any applications it manages restart when the server reboots. Basically, your node application will start as a service.
ref: https://www.digitalocean.com/community/tutorials/how-to-use-pm2-to-setup-a-node-js-production-environment-on-an-ubuntu-vps
Forever was not made to get node applications running as services. The right approach is to either create an /etc/inittab entry (old linux systems) or an upstart (newer linux systems).
Here's some documentation on how to set this up as an upstart:
https://github.com/cvee/node-upstart
crontab does not work for me on CentOS x86 6.5. #reboot seems to be not working.
Finally I got this solution:
Edit: /etc/rc.local
sudo vi /etc/rc.local
Add this line to the end of the file. Change USER_NAME and PATH_TO_PROJECT to your own. NODE_ENV=production means the app runs in production mode. You can add more lines if you need to run more than one node.js app.
su - USER_NAME -c "NODE_ENV=production /usr/local/bin/forever start /PATH_TO_PROJECT/app.js"
Don't set NODE_ENV in a separate line, your app will still run in development mode, because forever does not get NODE_ENV.
# WRONG!
su - USER_NAME -c "export NODE_ENV=production"
Save and quit vi (press ESC : w q return). You can try rebooting your server. After your server reboots, your node.js app should run automatically, even if you don't log into any account remotely via ssh.
You'd better set NODE_ENV environment in your shell. NODE_ENV will be set automatically when your account USER_NAME logs in.
echo export NODE_ENV=production >> ~/.bash_profile
So you can run commands like forever stop/start /PATH_TO_PROJECT/app.js via ssh without setting NODE_ENV again.
I wrote a script that does exactly this:
https://github.com/chovy/node-startup
I have not tried with forever, but you can customize the command it runs, so it should be straight forward:
/etc/init.d/node-app start
/etc/init.d/node-app restart
/etc/init.d/node-app stop
The problem with rc.local is that the commands are accessed as root which is different than logging to as a user and using sudo.
I solved this problem by adding a .sh script with the startup commands i want to etc/profile.d. Any .sh file in profile.d will load automatically and any command will be treated as if you used the regular sudo.
The only downside to this is the specified user needs to loggin for things to start which in my situation was always the case.
I tried lots of the above answers. None of them worked for me. My app is installed in /home and as user, not as root. This probably means that when the above mentioned start scripts run, /home is not mounted yet, so the app is not started.
Then I found these instructions by Digital Ocean:
https://www.digitalocean.com/community/tutorials/how-to-use-pm2-to-setup-a-node-js-production-environment-on-an-ubuntu-vps
Using PM2 as explained was very simple and works perfectly: My virtual servers had two physical crashes since - downtime was only about a minute.
complete example crontab (located at /etc/crontab) ..
#!/bin/bash
# edit this file with .. crontab -u root -e
# view this file with .. crontab -u root -l
# put your path here if it differs
PATH=/root/bin:/root/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/snap/bin
# * * * * * echo "executes once every minute" > /root/deleteme
#reboot cd /root/bible-api-dbt-server; npm run forever;
#reboot cd /root/database-api-server; npm run forever;
#reboot cd /root/mailer-api-server; npm run forever;
I have found my own solution by using serve & npm as follows:
Install serve package: npm install -g serve
Then have the command serve -s /var/www/sitename to execute on reboot.
This is what works for me on my VPS.
You can use the following command in your shell to start your node forever:
forever app.js //my node script
You need to keep in mind that the server on which your app is running should always be kept on.
On an Amazon S3 Linux instance, I have two scripts called start_my_app and stop_my_app which start and stop forever (which in turn runs my Node.js application). I use these scripts to manually start and stop my Node.js application. So far so good.
My problem: I also want to set it up such that start_my_app is run whenever the system boots up. I know that I need to add a file inside init.d and I know how to symlink it to the proper directory within rc.d, but I can't figure out what actually needs to go inside the file that I place in init.d. I'm thinking it should be just one line, like, start_my_app, but that hasn't been working for me.
First create your startup script # /home/user/startup.sh, and make it executable
chmod +x /home/user/startup.sh
Then set a crontab for it:
$ crontab -e
#reboot /home/user/startup.sh
Now your your startup.sh script will run at every start.
The file you put in /etc/init.d/ have to be set to executable with:
chmod +x /etc/init.d/start_my_app
As pointed out by #meetamit, if it still does not run you might have to create a symbolic link to the file in /etc/rc.d/
ln -s /etc/init.d/start_my_app /etc/rc.d/
Please note that on the latest versions of Debian, this will not work as your script will have to be LSB compliant (provide at least the following actions: start, stop, restart, force-reload, and status):
https://wiki.debian.org/LSBInitScripts
As a note, you should always use the absolute path to files in your scripts instead of the relative one, it may solve unexpected issues:
/var/myscripts/start_my_app
Finally, make sure that you included the shebang on top of the file:
#!/bin/sh
A simple approach is to add a line in /etc/rc.local :
/PATH/TO/MY_APP &
or if you want to run the command as a special user :
su - USER_FOOBAR -c /PATH/TO/MY_APP &
(the trailing ampersand backgrounds the process and allows the rc.local to continue executing)
If you want a full init script, debian distro have a template file, so :
cp /etc/init.d/skeleton /etc/init.d/your_app
and adapt it a bit.
This is the way I do it on Red Hat Linux systems.
Put your script in /etc/init.d, owned by root and executable. At the top of the script, you can give a directive for chkconfig. Example, the following script is used to start a Java application as user oracle.
The name of the script is /etc/init.d/apex
#!/bin/bash
# chkconfig: 345 99 10
# Description: auto start apex listener
#
case "$1" in
'start')
su - oracle -c "cd /opt/apex ; java -jar apex.war > logs/apex.log 2>logs/apex_error.log &";;
'stop')
echo "put something to shutdown or kill the process here";;
esac
This says that the script must run at levels 3, 4, and 5, and the priority for start/stop is 99 and 10.
Then, as user root you can use chkconfig to enable or disable the script at startup:
chkconfig --list apex
chkconfig --add apex
And you can use service start/stop apex.
Enter cron using sudo:
sudo crontab -e
Add a command to run upon start up, in this case a script:
#reboot sh /home/user/test.sh
Save:
Press ESC then :x to save and exit, or hit ESC then ZZ (that's shift+zz)
Test Test Test:
Run your test script without cron to make sure it actually works.
Make sure you saved your command in cron, use sudo crontab -e
Reboot the server to confirm it all works sudo #reboot
Just have a line added to your crontab..
Make sure the file is executable:
chmod +x /path_to_you_file/your_file
To edit crontab file:
crontab -e
Line you have to add:
#reboot /path_to_you_file/your_file
That simple!
Another option is to have an #reboot command in your crontab.
Not every version of cron supports this, but if your instance is based on the Amazon Linux AMI then it will work.
Edit the rc.local file using nano or gedit editor and add your scripts in it. File path could be /etc/rc.local or /etc/rc.d/rc.local.
sudo nano /etc/rc.local
This is the edit:
#!/bin/sh
/path-to-your-script/your-scipt-name.sh
once done press ctrl+o to update, pressEnter then ctrl+x.
Make the file executable.
sudo chmod 755 /etc/rc.local
Then initiate the rc-local service to run script during boot.
sudo systemctl start rc-local
You can do it :
chmod +x PATH_TO_YOUR_SCRIPT/start_my_app
then use this command
update-rc.d start_my_app defaults 100
Please see this page on Cyberciti.
Many answers on starting something at boot, but often you want to start it just a little later, because your script depends on e.g. networking. Use at to just add this delay, e.g.:
at now + 1 min -f /path/yourscript
You may add this in /etc/rc.local, but also in cron like:
# crontab -e
#reboot at now + 1 min -f /path/yourscript
Isn't it fun to combine cron and at? Info is in the man page man at.
As for the comments that #reboot may not be widely supported, just try it. I found out that /etc/rc.local has become obsolete on distros that support systemd, such as ubuntu and raspbian.
The absolute easiest method if all you want to run is a simple script, (or anything) is if you have a gui to use system > preferences then startup apps.
just browse to the script you want and there you go. (make script executable)
This simple solution worked for me on an Amazon Linux instance running CentOS.
Edit your /etc/rc.d/rc.local file and put the command there. It is mentioned in this file that it will be executed after all other init scripts. So be careful in that regards. This is how the file looks for me currently.. Last line is the name of my script.
Create your own /init executable
This is not what you want, but it is fun!
Just pick an arbitrary executable file, even a shell script, and boot the kernel with the command line parameter:
init=/path/to/myinit
Towards the end of boot, the Linux kernel runs the first userspace executable at the given path.
Several projects provide popular init executables used by major distros, e.g. systemd, and in most distros init will fork a bunch of processes used in normal system operation.
But we can hijack /init it to run our own minimal scripts to better understand our system.
Here is a minimal reproducible setup: https://github.com/cirosantilli/linux-kernel-module-cheat/tree/f96d4d55c9caa7c0862991025e1291c48c33e3d9/README.md#custom-init
I refered to this blog, always sound a good choice
https://blog.xyzio.com/2016/06/14/setting-up-a-golang-website-to-autorun-on-ubuntu-using-systemd/
vim /lib/systemd/system/gosite.service
Description=A simple go website
ConditionPathExists=/home/user/bin/gosite
[Service]
Restart=always
RestartSec=3
ExecStart=/home/user/bin/gosite
[Install]
WantedBy=multi-user.target
systemctl enable gosite.service
multi ways to finish it:
crontab
rc.local
init.d
systemd
For Debian 9 see https://askubuntu.com/questions/228304/how-do-i-run-a-script-at-start-up. It is helped me. Short version for Debian 9:
add commands (as root) to /etc/rc.local
/path_to_file/filename.sh || exit 1 # Added by me
exit 0
Probably, /path_to_file/filename.sh should be executable (I think so).
In Lubuntu I had to deal with the opposite situation. Skype start running after booting and I found in ~/.config/autostart/ the file skypeforlinux.desktop. The content of the file is as follows:
[Desktop Entry]
Name=Skype for Linux
Comment=Skype Internet Telephony
Exec=/usr/bin/skypeforlinux
Icon=skypeforlinux
Terminal=false
Type=Application
StartupNotify=false
X-GNOME-Autostart-enabled=true
Deleting this file helped me.
Here is a simpler method!
First: write a shell script and save it a .sh
here is an example
#!/bin/bash
Icoff='/home/akbar/keyboardONOFF/icon/Dt6hQ.png'
id=13
fconfig=".keyboard"
echo "disabled" > $fconfig
xinput float $id
notify-send -i $Icoff "Internal Keyboard disabled";
this script will disable the internal keyboard at startup.
Second: Open the application " Startup Application Preferences"
enter image description here
enter image description here
Third: click Add.
fourth: in the NAME section give a name.
fifth: In the command section browse to your .sh .
sixth: edit your command section to:
bash <space> path/to/file/<filename>.sh <space> --start
seventh: click Add. Thats it! Finished!
Now confirm by rebooting your pc.
cheers!
Add your script to /etc/init.d/ directory
Update your rc run-levels:
$ update-rc.d myScript.sh defaults NN where NN is the order in which it should be executed. 99 for example will mean it would be run after 98 and before 100.
Painless, easiest and the most universal method is simply
executing it with ~.bash_profile or ~.profile (if you don't have bash_profile file).
Just add the execution command at the bottom of that file and it will be executed when system started.
I have this one at the bottom an example;
~\Desktop\sound_fixer.sh
Working with Python 3 microservices or shell; using Ubuntu Server 18.04 (Bionic Beaver) or Ubuntu 19.10 (Eoan Ermine) or Ubuntu 18.10 (Cosmic Cuttlefish) I always do like these steps, and it worked always too:
Creating a microservice called p example "brain_microservice1.service" in my case:
$ nano /lib/systemd/system/brain_microservice1.service
Inside this new service that you are in:
[Unit]
Description=brain_microservice_1
After=multi-user.target
[Service]
Type=simple
ExecStart=/usr/bin/python3.7 /root/scriptsPython/RUN_SERVICES/microservices /microservice_1.py -k start -DFOREGROUND
ExecStop=/usr/bin/python3.7 /root/scriptsPython/RUN_SERVICES/microservices/microservice_1.py -k graceful-stop
ExecReload=/usr/bin/python3.7 /root/scriptsPython/RUN_SERVICES/microservices/microservice_1.py -k graceful
PrivateTmp=true
LimitNOFILE=infinity
KillMode=mixed
Restart=on-failure
RestartSec=5s
[Install]
WantedBy=multi-user.target
Give the permissions:
$ chmod -X /lib/systemd/system/brain_microservice*
$ chmod -R 775 /lib/systemd/system/brain_microservice*
Give the execution permission then:
$ systemctl daemon-reload
Enable then, this will make then always start on startup
$ systemctl enable brain_microservice1.service
Then you can test it;
$ sudo reboot now
Finish = SUCCESS!!
This can be done with the same body script to run shell, react ... database startup script ... any kind os code ... hope this help u...
...
For some people, this will work:
You could simply add the following command into System → Preferences → Startup Applications:
bash /full/path/to/your/script.sh
I have a node.js script which need to start at boot and run under the www-data user. During development I always started the script with:
su www-data -c 'node /var/www/php-jobs/manager.js
I saw exactly what happened, the manager.js works now great. Searching SO I found I had to place this in my /etc/rc.local. Also, I learned to point the output to a log file and to append the 2>&1 to "redirect stderr to stdout" and it should be a daemon so the last character is a &.
Finally, my /etc/rc.local looks like this:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
su www-data -c 'node /var/www/php-jobs/manager.js >> /var/log/php-jobs.log 2>&1 &'
exit 0
If I run this myself (sudo /etc/rc.local): yes, it works! However, if I perform a reboot no node process is running, the /var/log/php-jobs.log does not exist and thus, the manager.js does not work. What is happening?
In this example of a rc.local script I use io redirection at the very first line of execution to my own log file:
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
exec 1>/tmp/rc.local.log 2>&1 # send stdout and stderr from rc.local to a log file
set -x # tell sh to display commands before execution
/opt/stuff/somefancy.error.script.sh
exit 0
On some linux's (Centos & RH, e.g.), /etc/rc.local is initially just a symbolic link to /etc/rc.d/rc.local. On those systems, if the symbolic link is broken, and /etc/rc.local is a separate file, then changes to /etc/rc.local won't get seen at bootup -- the boot process will run the version in /etc/rc.d. (They'll work if one runs /etc/rc.local manually, but won't be run at bootup.)
Sounds like on dimadima's system, they are separate files, but /etc/rc.d/rc.local calls /etc/rc.local
The symbolic link from /etc/rc.local to the 'real' one in /etc/rc.d can get lost if one moves rc.local to a backup directory and copies it back or creates it from scratch, not realizing the original one in /etc was just a symbolic link.
I ended up with upstart, which works fine.
In Ubuntu I noticed there are 2 files. The real one is /etc/init.d/rc.local; it seems the other /etc/rc.local is bogus?
Once I modified the correct one (/etc/init.d/rc.local) it did execute just as expected.
You might also have made it work by specifying the full path to node. Furthermore, when you want to run a shell command as a daemon you should close stdin by adding 1<&- before the &.
I had the same problem (on CentOS 7) and I fixed it by giving execute permissions to /etc/local:
chmod +x /etc/rc.local
if you are using linux on cloud, then usually you don't have chance to touch the real hardware using your hands. so you don't see the configuration interface when booting for the first time, and of course cannot configure it. As a result, the firstboot service will always be in the way to rc.local. The solution is to disable firstboot by doing:
sudo chkconfig firstboot off
if you are not sure why your rc.local does not run, you can always check from /etc/rc.d/rc file because this file will always run and call other subsystems (e.g. rc.local).
I got my script to work by editing /etc/rc.local then issuing the following 3 commands.
sudo mv /filename /etc/init.d/
sudo chmod +x /etc/init.d/filename
sudo update-rc.d filename defaults
Now the script works at boot.
I am using CentOS 7.
$ cd /etc/profile.d
$ vim yourstuffs.sh
Type the following into the yourstuffs.sh script.
type whatever you want here to execute
export LD_LIBRARY_PATH=/usr/local/cuda-7.0/lib64:$LD_LIBRARY_PATH
Save and reboot the OS.
I have used rc.local in the past. But I have learned from my experience that the most reliable way to run your script at the system boot time is is to use #reboot command in crontab. For example:
#reboot path_to_the_start_up_script.sh
This is most probably caused by a missing or incomplete PATH environment variable.
If you provide full absolute paths to your executables (su and node) it will work.
It is my understanding that if you place your script in a certain RUN Level, you should use ln -s to link the script to the level you want it to work in.
first make the script executable using
sudo chmod 755 /path/of/the/file.sh
now add the script in the rc.local
sh /path/of/the/file.sh
before exit 0
in the rc.local,
next make the rc.local to executable with
sudo chmod 755 /etc/rc.local
next to initialize the rc.local use
sudo /etc/init.d/rc.local start
this will initiate the rc.local
now reboot the system.
Done..
I found that because I was using a network-oriented command in my rc.local, sometimes it would fail. I fixed this by putting sleep 3 at the top of my script. I don't know why but it seems when the script is run the network interfaces aren't properly configured or something, and this just allows some time for the DHCP server or something. I don't fully understand but I suppose you could give it a try.
I had exactly same issue, the script was running fine locally but when I reboot/power-on it was not.
I resolved the issue by changing the file path. Basically need to give the complete path in the script. While running locally, file can be accessed but when running on reboot, local path will not be understood.
1 Do not recommend using root to run the apps such as node app.
Well you can do it but may catch more exceptions.
2 The rc.local normally runs as root user.
So if the your script should runs as another user such as www U should make sure the PATH and other environment is ok.
3 I find a easy way to run a service as a user:
sudo -u www -i /the/path/of/your/script
Please prefer the sudo manual~
-i [command]
The -i (simulate initial login) option runs the shell specified by the password database entry of the target user as a loginshell...
rc.local only runs on startup. If you reboot and want the script to execute, it needs to go into the rc.0 file starting with the K99 prefix.