multiple lines in vim tabpage window [duplicate] - vim

This question already has an answer here:
display two rows of tabs vim
(1 answer)
Closed 8 years ago.
This is not about indentation.
I usually uses vim's tabpage to open multiple files.
This usually works well, but when there are too many tabpages, tabpage starts to shorten file names, making it difficult to recognize what file is opened for each tab.
So, How can I configure vim's tabpage window to have multiple lines rather than just one line?
(If there is another good way to deal with multiple files, welcome, but you should first answer to the main question.)

To the best of my knowledge, what you ask is not possible with vim as it is. Adding that behaviour may be possible if you play with vim's source code but this is almost certainly a lost cause.
However, vim's tabs are not 1-to-1 file proxies and you are wrong in treating them as such. The canonical multiple-buffer management method is to open each file as a buffer (that's how Vim works by default, the buffer is the 1-to-1 file proxy you need) and jump from one to another. It's simpler, more solid and infinitely more scalable than tabs (which are a fundamentally broken UX paradigm anyway).

You can use :tabs List the tab pages and the windows they contain.
For more information :
:help :tabs
By the way, there is no need to use tab to open multiple files. Vim is based on buffers.
Basically, you can do vim file1 file2, each file is open in a buffer. So, you can use :bn (buffer next) to switch between buffers.

Related

Why do Vim experts prefer buffers over tabs? [closed]

Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 2 years ago.
Improve this question
I don't understand buffers. When I open 3 files on the same tab and close my window, I'm generally annoyed to find out next time I open one of those files that there are strange swap files lingering and giving me pesky messages. But time and time again I read that these things are the productivity nirvana I'm missing out on and that tabs were made for the plebeians to use.
So I ask you, the Vim expert: what are the advantages of using buffers over tabs? I don't see how the difference could be profoundly different, but I would consider myself only at the beginner-intermediate level at operating Vim. Is :ls :b# really that much faster than gting around? I feel it must go deeper than this.
As ZyX said on #vim, this question sounds like "Why do Vim experts prefer tasty over warm?".
"Vim experts" don't prefer buffers over tabs: they use buffers as the file proxies they are and tab pages as the workspaces they are. Buffers and tab pages have different purposes so preferring one to the other makes no sense whatsoever.
The issue with buffers and tabs is one of confusion, caused by a combination of independent facts.
Most "modern" text editors and IDEs use a tab metaphor to represent loaded files. That metaphor acts as an information system — it shows the user what files are opened and their state — and as an interactive device — it allows the user to manipulate (reorder, select, close…) those opened files. Despite their many limitations, tabs are everywhere and people are used to them and expect them everywhere.
Vim introduced tab pages in 7.0 as a way for its users to create ad-hoc "workspaces". Nothing in their features, their specific options, their specific commands or their :help sections suggests that tab pages could or should be used as file proxies.
Nothing except the name and the appearance of "tab pages", of course, which leads to much confusion.
Without :set hidden, which is disabled by default and not very easy to find, Vim makes it impossible to switch to another buffer without writing the current one or abandoning its changes. New users, unaware of that option, have no choice but to turn to heavy windows use or to the closest "tab-like" feature they can find: tab pages.
"Tab page" is an unfortunate name choice for that feature, especially in an era dominated by the idea that reading documentation is a waste of time.
In Vim, tab pages are an abstraction built on top of windows, themselves an abstraction built on top of buffers. Each new level adds useful features but restricts your workflow.
The "buffer way"
With a buffer-based workflow, the files you are working with are distributed along a single dimension. You can cycle through your buffers, you can access a specific buffer by typing part of its name (with completion) or its number, you can alternate between buffers, you can target them pretty easily. There's basically no friction.
Eight buffers open, only one visible:
Switching by number:
Switching by name:
Buffers are Vim's file-proxies. If you think in terms of files, you think in terms of buffers.
The "window way"
With a window-based workflow, your "files" are both distributed along the same single "virtual" dimension as they would if you only used buffers and along two other "physical" dimensions. But the cartesian spaces in which those dimensions are found are almost completely separated: moving to another buffer still means "moving to another file" but moving to another window doesn't. The buffer that corresponds to the desired file may be displayed in that window but it could also be displayed in another one, maybe in another tab page, or not at all.
With windows, navigating between open files either becomes too complex or too simplistic, even with 'switchbuf' and :sb. Mostly because you are forced to use two sets of commands for what is essentially the same thing: accessing a buffer.
Windows have their use, as described below, but they don't have what it takes to replace buffers in anybody's workflow.
Here I am working on a Vim colorscheme. The two windows are different views of the same buffer: the top one serves as reference, with a table of the color codes used in the colorscheme, and the bottom one is where I work:
Windows are not designed as file-proxies and can't be made into ones: they are "containers" or "viewports" designed to offer you a view into a buffer. No more, no less.
The "tab way"
With a tab-based workflow, you essentially try to mimic the user experience you are used to from your previous editor while completely ignoring the very nature of Vim's tab pages. If we forget for a moment that this strategy is generally very unproductive, it is also impossible, just like with windows, to force Vim to adhere to that "one file = one tab" paradigm without losing a lot of flexibility.
Still working with the same files as above, the tabline takes up a significant space for virtually no benefit. All my files and all my tabs are called javascript*.vim so I can't do 3gt and be confident I'll end up at the right place and it is impossible to reach a specific tab by name. Add to that the fact that its label can very well be the very unhelpful but perfectly logical [Quickfix List]… Since there is no practical way to tie a file/buffer to a tab page, you are basically left with only one practical way to navigate between tab pages/buffers/files: cycling.
And yeah, my tabline is clobbered with only 8 tabs, imagine if I had 20!
Eight buffers open in eight tab pages (wrong)
Two tabs for two specific tasks (right)
Tab pages are "containers" or "viewports" designed to contain one or more windows, themselves also "containers" designed to contain buffers.
In conclusion
"Vim experts" (let's assume I can speak as if I was one) don't prefer buffers over tabs: they just use Vim as it was designed and are perfectly comfortable with that design:
"Vim experts" have 2, 30 or 97 buffers loaded and are very happy they don't have to deal with spatial distribution;
when they need to compare two files or work in one part of the current buffer while keeping another as a reference, "Vim experts" use windows because that's how they are meant to be used;
when they need to work for a while on a separate part of the project without messing with their current view, "Vim experts" load a brand new tab page.
I used to keep every buffer in a separate tab, but I grew tired of constantly gt and gT-ing around everywhere.
I also felt that buffers were too difficult to manage.
Here are some techniques that totally changed my earlier opinion:
Buffer management: :b. You get surprisingly fast at this. See vim, switching between files rapidly using vanilla Vim (no plugins)
Jump/Change lists (ctrl o/i and g;)
Alternate file (^)
tpope's Unimpaired plugin. Convenient mappings for flying through your buffers (among others).
Here is my typical workflow:
Open Vim, and use :e (usually with a regex like :e src/**/F*Bar.js) to open a buffer
Realize I need to open another file. Use :e for that as well. If I want to toggle between this buffer and the currently open buffer I will use :sp or :vsp to open it in a separate window.
Repeat until I've got the 3-5 files that I will be switching between using the techniques in the above bulleted list to fly between your buffers.
If I want to "start over" with my buffers, just close Vim and re-open.
I felt that after a week or so of forcing these new patterns, it became much easier to visualize which buffers I had open, and how to get to any one of them in only a few automatic strokes.
Tosses 2c into the pile.
TLDR; :b *part-of-filename* is the best way to find a file you need in the buffer list i.e. it is FASTER and has LESS cognitive load than buffer numbers, tabs, or windows for tracking files.
It's nothing for me to have 30 buffers open (I.e. I haven't been housekeeping), and the beauty of buffers used-well is that it doesn't slow me down at all. In fact, it speeds things up when four days after I opened the file I need it, call :b *part-of-filename* and it magically appears, impressing co-workers and toady collectivists alike.
Buffers are for files.
To be effective:
Open an important first file from a devilishly well chosen root directory
Open subsequent files with :e
Use ls ALL the time when you first start to get a good mental model (you can't grok what you can't see, mentally or literally)
Never :q, it blows
Enter :b into your muscle memory
:b1 is good for the first file you know you opened, otherwise numbers and letters get clumsy quick
:b# is good for switching to your last file, which is a common need
:bd# is good for when you've switched to a temp file, done what you needed to do, switched back with :b#, and now want to close that temp file
:b *part-of-filename* is otherwise the best way to find a file you need in the list i.e. it is FASTER and has LESS cognitive load than buffer numbers, tabs, or windows for tracking files.
The only annoyance of :b *part-of-filename* is that sometimes you haven't opened the file yet, and you need to go back and :e path/to/full-filename first.
Tabs are for differentiating truly unrelated files.
Or keeping a particular windows layout handy (disclaimer: I've never used it for this myself).
Or for files rarely used, but predictably needed. For me, that's usually a commitMessage file that I annotate as I work so I don't have to do too much thinking when it comes time to make a commit. gt is faster than :b com<enter> (if you're feeling lucky, otherwise :b com<tab><enter>)
:tabe commitMessage
gt or gT also a muscle memory favorite
Window splits are for visually comparing information
Or having immediate access to important information (truthfully, unless that info is somehow something I need to live update with :e i.e. a log file, I usually just pull the content into the current file and deal with it there).
:vsp or C-w v opens a vertical split i.e. left | right, then use :b or :e to get the file you want
:sp or C-w s open a horizontal split i.e. top / bottom
C-w C-w i.e. double Ctrl-w, rotates you around the available windows
C-w c close current window
C-w o close all other windows, keep current ONLY
The downside of tabs is that you can only see the contents of one at a time. So if you use them like in a browser, you're losing out on viewing multiple buffers side by side, or even viewing separate parts of the same file in splits. Therefore, many recommend to use tabs only to segregate different workspaces (e.g. have one for a Java project, another for a todo list, a third to hack on a script on the side).
The problems you describe make it appear that you're using Vim wrong. Either have (mostly) a single, dedicated instance. Then, buffers that become hidden will simply "reappear" if you re-edit them (and you can now use the buffer list to recall them), and there won't be swap file messages. Or, use separate Vim instances per project / file / edit session, but then make it a habit to fully :quit each instance when you're done with the file.
Another tip, when using the buffer name as the argument to :buffer, you don't have to specify entire names. However, if more than one buffer matches the given argument, the buffers won't be switched.
Any fragment of the buffer name can be used to match. For example, if you have the buffers request_manager.java and queue_manager.java then :buffer que or :b que matches both of them, but will switch to queue_manager.java as it matches at the beginning.
Tabs and Buffers are two different standards in Vi.
Read these three definitions:
A buffer is the in-memory text of a file
A window is a viewport on a buffer.
A tab page is a collection of windows.
Read this article for more https://joshldavis.com/2014/04/05/vim-tab-madness-buffers-vs-tabs/
I use tabs, Ctrl-P and Vim sessions in my workflow and have for over a year now:
I have ) and ( mapped to "go to next tab" and "go to previous tab" respectively. tn opens a new tab. I also make use of tabm to help keep things organized.
I use Vim sessions for groups of files relating to the current story/bug I'm working on, usually done by category. These sessions get overwritten during the course of the process.
I have yet to find anything better than Ctrl-P, but it does take a bit to process all the files for finding.
I would like to suggest a brillent implementation from a good number of years ago: kien/tabman.vim. It clarifies the following:
One can have as many buffers that are carefully hidden, somewhere;
By design, tabs are meant to display bufferes in creative ways.
With some proper tabline plugin, one can display all the hidden buffers at the top row (tabline);
Per my experience with vim-airline, the tabline will show very few relevant information when I create a new tab.
Two tags will occupy the tabline slot, side by side, wasting the rest of the horizontal spaces
Worst still, I no longer have any idea of what are the buffers that are hidden.
It has been a wonderful rediscovery of this magic plugin, which should have been staying in my Vim configuration for a good number of years as well.
While I would continue to look for some thing that also displays all the hidden buffers, TabMan is my superman when it comes to having a bird's eye view of how buffers were arranged across different tabs.
I load "selected" buffers as tabs to quickly (TAB/S-TAB) toggle between them.
The framework of workspaces fits here as for me buffers VS tabs is mostly the visibility thing. I can pop important/work files in windows and tabs and hide the ones I don't currently need to utilize in the background on the fly without having to remember paths or take time to search and load them up again once the need arises. This allows for handling several tasks or projects in one VIM session, I guess this used to be important in low-memory machines but is also good for concentrating all editing tasks under one application frame. I also have buffer shifting shortcuts set to Ctrl-Right/Left so I can quickly shift through various buffers as well.
Bottom line, one can only split up to some windows for his uses as much as screen estate goes, but one can hold multiple windows settings in several tabs thus expanding one's workspace and improving workflow allowing the convenient division of complicated tasks revolving more than one file.
For the swap files, you can tell VIM to keep all of them in one folder of your designation. For this use :set directory.
Add these to your .vimrc and start loving buffers:
:nnoremap <Tab> :n<cr>
:nnoremap <S-Tab> :N<cr>
That way you can cycle forward/backward through them in normal mode via Tab/ShiftTab.

How to effectively manage tabs / buffers in vim?

This is how I use vim's tabs:
I have shortcuts to move a tab to left/right with <ctrl>j <ctrl>k and to move between tabs with <ctrl>h, <ctrl>l. According to answer to this question, I'm doing it wrong. How to effectively use buffers then? Constantly listing hidden buffers to know which to switch to doesn't seem like an imprevement.
There is no right or wrong way of handling buffers in Vim. First, learn and understand the difference between buffers, windows, and tab pages. Then adopt a style that suits you. There are many "buffer management" plugins on http://www.vim.org/, but you can also just use the built-in commands like :buffer together with file completion.
If you solely stick to the "one file per tab" rule (like in a browser), you're losing the benefits of window splits, and you'll still occasionally encounter splits in the form of the preview and quickfix windows, and in order to use diff mode.
I mostly use tab pages to separate different workspaces (I only have a single GVIM instance running); sometimes I open the same set of buffers in different tabs in different arrangements, like the perspectives in IDEs such as Eclipse.

Why do you use tabs in g(vim) when you're programming?

In Using vim's tabs like buffers:
This is not how vim's tabs are
designed to be used. In fact, they're
misnamed. A better name would be
"viewport" or "layout", because that's
what a tab is -- it's a different
layout of windows of ALL of your
existing buffers.
If each tab in vim is just a different layout of all existing buffers (so doing :ls in each tab, shows the same list), isn't the existence of tabs in vim useless? If I can use plugins to handle buffers like minibufexplorer and such, why do tabs exist? Shouldn't at least buffers opened in a tab be shown when doing :ls only on that tab (acting somehow like a "workspace" feature)?
I think that having multiple tabs with different files opened, but when trying to do :bn on the tabs it goes to all opened buffers, it becomes a mess. Some people like to open different tabs for each "domain" of problem when developing, but I to me it would be really useful if it was possible to have a different buffer list for each tab in Vim.
(I have search SO a lot, and couldn't find WHY tabs exist, only "stop using tabs in vim like tabs in others editors, use buffers instead", so why do tabs in vim were implemented? That's why I don't think this question is a duplicate)
Summarizing... How do you feel about this subject - usefulness of tabs in Vim when programming? How do you use it?
Tabs can each have their own working directory which makes grouping and working with similar groups of files much more convenient.
Also, directly from :help tabpage:
Tabs are also a nice way to edit a buffer temporarily without changing
the current window layout. Open a new tab page, do whatever you want
to do and close the tab page.
I use tabs often, and use them to logically group files.
For instance, I'll open views or HTML in one tab, in another have the associated controllers and another has the associated models. Then I'll save out the layout using :mksession! and reload it later with the -S flag.
Other times I'll use tabs to keep one of vim's help pages open just so it's immediately available.
I think the main thing is tabs allow you to organize your buffers in a different way than using split windows and that flexibility allows vim to work with more people's brains, because we all think differently.
This answer to a related question might help: Using Vim's tabs like buffers
I normally use the -O flag to open files in split windows, but if you insist on opening them in separate tabs you can use -p. I prefer splits because I can easily see two separate files side by side, something you can't do with tabs.
And finally, here's some key defs I use to make it easy to move between splits:
" Switch between window splits using big J or K and expand the split to its
" full size.
"
" Move vertically in the window through the horizontal splits...
map <C-J> <C-w>j<C-w>_
map <C-K> <C-w>k<C-w>_
" Move horizontally in the window through the vertical splits...
map <C-H> <C-w>h<C-w>\|
map <C-L> <C-w>l<C-w>\|
I normally use tabs when my current view is split as much as it can while still allowing me to read and program efficiently. Most of the time it is there so that I have quick access to the information of that file (generally some kind of include file).
I rarely use tabs for actual development but rather a placeholder for information that I want to occasionally look at.
So normaly I have
Tab0 -> source file and test file
Tab1 -> include file and sometimes a related interface file

Vim tabs and buffers

I've started using Vim some time ago. So far - I enjoyed my experience with this editor. Until recently I started using Tabs in Vim.
I must admit that I am a bit frustrated about whole buffer/tab/window concept in Vim. For example, suppose I am working on a number of files related to one "project". All files are open in tabs. Suppose I issue a command which would make switch active buffer (e.g. jumping to function definition with CTRL-]). Result is that in current tab I see buffer with file where function is defined. BUT I already have the same buffer in another tab! Now I have two tabs with same contents.
Is there a possibility to somehow bind together buffers with tabs? Or, say make vim check if buffer to be switched to is currently open in some window/tab and switch to that window/tab instead?
So far I have found the following (which does not solve above described problem, but somewhat demonstrates Vim behaviour I am looking for):
set switchbuf=usetab
Now, when using :sb, :sbnext, :sbprev instead of :b, :bnext, :bprev to switch buffers, Vim will check if buffer is open in tab/window and switch to that tab/window.
Isn't this question similar to this one: Using vim's tabs like buffers

Using Vim's tabs like buffers

I have looked at the ability to use tabs in Vim (with :tabe, :tabnew, etc.) as a replacement for my current practice of having many files open in the same window in hidden buffers.
I would like every distinct file that I have open to always be in its own tab. However, there are some things that get in the way of this. How do I fix these:
When commands like gf and ^] jump to a location in another file, the file opens in a new buffer in the current tab. Is there a way to have all of these sorts of commands open the file in a new tab, or switch to the existing tab with the file if it is already open?
When switching buffers I can use
:b <part of filename><tab>
and it will complete the names of files in existing buffers. <part of filename> can even be the middle of a filename instead of the beginning. Is there an equivalent for switching tabs?
Stop, stop, stop.
This is not how Vim's tabs are designed to be used. In fact, they're misnamed. A better name would be "viewport" or "layout", because that's what a tab is—it's a different layout of windows of all of your existing buffers.
Trying to beat Vim into 1 tab == 1 buffer is an exercise in futility. Vim doesn't know or care and it will not respect it on all commands—in particular, anything that uses the quickfix buffer (:make, :grep, and :helpgrep are the ones that spring to mind) will happily ignore tabs and there's nothing you can do to stop that.
Instead:
:set hidden
If you don't have this set already, then do so. It makes vim work like every other multiple-file editor on the planet. You can have edited buffers that aren't visible in a window somewhere.
Use :bn, :bp, :b #, :b name, and ctrl-6 to switch between buffers. I like ctrl-6 myself (alone it switches to the previously used buffer, or #ctrl-6 switches to buffer number #).
Use :ls to list buffers, or a plugin like MiniBufExpl or BufExplorer.
Bit late to the party here but surprised I didn't see the following in this list:
:tab sball - this opens a new tab for each open buffer.
:help switchbuf - this controls buffer switching behaviour, try :set switchbuf=usetab,newtab. This should mean switching to the existing tab if the buffer is open, or creating a new one if not.
Vim :help window explains the confusion "tabs vs buffers" pretty well.
A buffer is the in-memory text of a file.
A window is a viewport
on a buffer.
A tab page is a collection of windows.
Opening multiple files is achieved in vim with buffers. In other editors (e.g. notepad++) this is done with tabs, so the name tab in vim maybe misleading.
Windows are for the purpose of splitting the workspace and displaying multiple files (buffers) together on one screen. In other editors this could be achieved by opening multiple GUI windows and rearranging them on the desktop.
Finally in this analogy vim's tab pages would correspond to multiple desktops, that is different rearrangements of windows.
As vim help: tab-page explains a tab page can be used, when one wants to temporarily edit a file, but does not want to change anything in the current layout of windows and buffers. In such a case another tab page can be used just for the purpose of editing that particular file.
Of course you have to remember that displaying the same file in many tab pages or windows would result in displaying the same working copy (buffer).
Contrary to some of the other answers here, I say that you can use tabs however you want. vim was designed to be versatile and customizable, rather than forcing you to work according to predefined parameters. We all know how us programmers love to impose our "ethics" on everyone else, so this achievement is certainly a primary feature.
<C-w>gf is the tab equivalent of buffers' gf command. <C-PageUp> and <C-PageDown> will switch between tabs. (In Byobu, these two commands never work for me, but they work outside of Byobu/tmux. Alternatives are gt and gT.) <C-w>T will move the current window to a new tab page.
If you'd prefer that vim use an existing tab if possible, rather than creating a duplicate tab, add :set switchbuf=usetab to your .vimrc file. You can add newtab to the list (:set switchbuf=usetab,newtab) to force QuickFix commands that display compile errors to open in separate tabs. I prefer split instead, which opens the compile errors in a split window.
If you have mouse support enabled with :set mouse=a, you can interact with the tabs by clicking on them. There's also a + button by default that will create a new tab.
For the documentation on tabs, type :help tab-page in normal mode. (After you do that, you can practice moving a window to a tab using <C-w>T.) There's a long list of commands. Some of the window commands have to do with tabs, so you might want to look at that documentation as well via :help windows.
Addition: 2013-12-19
To open multiple files in vim with each file in a separate tab, use vim -p file1 file2 .... If you're like me and always forget to add -p, you can add it at the end, as vim follows the normal command line option parsing rules. Alternatively, you can add a bash alias mapping vim to vim -p.
I ran into the same problem. I wanted tabs to work like buffers and I never quite manage to get them to. The solution that I finally settled on was to make buffers behave like tabs!
Check out the plugin called Mini Buffer Explorer, once installed and configured, you'll be able to work with buffers virtaully the same way as tabs without losing any functionality.
This is an answer for those not familiar with Vim and coming from other text editors (in my case Sublime Text).
I read through all these answers and it still wasn't clear. If you read through them enough things begin to make sense, but it took me hours of going back and forth between questions.
The first thing is, as others have explained:
Tab Pages, sound a lot like tabs, they act like tabs and look a lot like tabs in most other GUI editors, but they're not. I think it's an a bad mental model that was built on in Vim, which unfortunately clouds the extra power that you have within a tab page.
The first description that I understood was from #crenate's answer is that they are the equivalent to multiple desktops. When seen in that regard you'd only ever have a couple of desktops open but have lots of GUI windows open within each one.
I would say they are similar to in other editors/browsers:
Tab groupings
Sublime Text workspaces (i.e. a list of the open files that you have in a project)
When you see them like that you realise the power of them that you can easily group sets of files (buffers) together e.g. your CSS files, your HTML files and your JS files in different tab pages. Which is actually pretty awesome.
Other descriptions that I find confusing
Viewport
This makes no sense to me. A viewport which although it does have a defined dictionary term, I've only heard referring to Vim windows in the :help window doc. Viewport is not a term I've ever heard with regards to editors like Sublime Text, Visual Studio, Atom, Notepad++. In fact I'd never heard about it for Vim until I started to try using tab pages.
If you view tab pages like multiple desktops, then referring to a desktop as a single window seems odd.
Workspaces
This possibly makes more sense, the dictionary definition is:
A memory storage facility for temporary use.
So it's like a place where you store a group of buffers.
I didn't initially sound like Sublime Text's concept of a workspace which is a list of all the files that you have open in your project:
the sublime-workspace file, which contains user specific data, such as the open files and the modifications to each.
However thinking about it more, this does actually agree. If you regard a Vim tab page like a Sublime Text project, then it would seem odd to have just one file open in each project and keep switching between projects. Hence why using a tab page to have open only one file is odd.
Collection of windows
The :help window refers to tab pages this way. Plus numerous other answers use the same concept. However until you get your head around what a vim window is, then that's not much use, like building a castle on sand.
As I referred to above, a vim window is the same as a viewport and quiet excellently explained in this linux.com article:
A really useful feature in Vim is the ability to split the viewable area between one or more files, or just to split the window to view two bits of the same file more easily. The Vim documentation refers to this as a viewport or window, interchangeably.
You may already be familiar with this feature if you've ever used Vim's help feature by using :help topic or pressing the F1 key. When you enter help, Vim splits the viewport and opens the help documentation in the top viewport, leaving your document open in the bottom viewport.
I find it odd that a tab page is referred to as a collection of windows instead of a collection of buffers. But I guess you can have two separate tab pages open each with multiple windows all pointing at the same buffer, at least that's what I understand so far.
You can map commands that normally manipulate buffers to manipulate tabs, as I've done with gf in my .vimrc:
map gf :tabe <cfile><CR>
I'm sure you can do the same with [^
I don't think vim supports this for tabs (yet). I use gt and gT to move to the next and previous tabs, respectively. You can also use Ngt, where N is the tab number. One peeve I have is that, by default, the tab number is not displayed in the tab line. To fix this, I put a couple functions at the end of my .vimrc file (I didn't paste here because it's long and didn't format correctly).
I use buffers like tabs, using the BufExplorer plugin and a few macros:
" CTRL+b opens the buffer list
map <C-b> <esc>:BufExplorer<cr>
" gz in command mode closes the current buffer
map gz :bdelete<cr>
" g[bB] in command mode switch to the next/prev. buffer
map gb :bnext<cr>
map gB :bprev<cr>
With BufExplorer you don't have a tab bar at the top, but on the other hand it saves space on your screen, plus you can have an infinite number of files/buffers open and the buffer list is searchable...
Looking at
:help tabs
it doesn't look like vim wants to work the way you do...
Buffers are shared across tabs, so it doesn't seem possible to lock a given buffer to appear only on a certain tab.
It's a good idea, though.
You could probably get the effect you want by using a terminal that supports tabs, like multi-gnome-terminal, then running vim instances in each terminal tab. Not perfect, though...
If you want buffers to work like tabs, check out the tabline plugin.
That uses a single window, and adds a line on the top to simulate the tabs (just showing the list of buffers). This came out a long time ago when tabs were only supported in GVim but not in the command line vim. Since it is only operating with buffers, everything integrates well with the rest of vim.
relevant:
Vim: can global marks switch tabs instead of the file in the current tab?
maybe useful to solve a little part of OP's problem:
nno \ <Cmd>call To_global_mark()<cr>
fun! To_global_mark()
-tab drop /tmp/useless.md
exe 'normal! `' .. toupper(input("To global mark: "))
endf

Resources