I was wondering how I might go about moving around Columns/Text around in VIM using a string. I have a short list of names I have to reorder, which need to be placed in Last Name First Middle to First Middle Last.
So here would be an example list:
Plant, Robert A.
Page, Jimmy
Bonhham, John H.
Jones, John Paul
I was thinking that the string should look something like this:
:s/\([A-z]\{2}\)\(\[A-z]\{2}\)/2\1/
Thanks
First, I recommend using the \v "very magic" flag to avoid all the other internal escaping of metacharacters. This will work with a replacement like:
:s/\v([A-z]+),\s+([A-z]+)(\s+[A-z.]+)?/\2\3 \1
Breaking it down:
([A-z]+) Capture the last name into \1
,\s+ A literal comma and one or more spaces
([A-z]+) Capture the first name into \2
(\s+[A-z.]+)? Capture the middle name with its leading spaces, since it may not exist. Also permit the ., and end with a ? to make the whole construct optional, into \3
\2\3 \1 Replace with the second group (first name) followed immediately by the middle name \3 with no space in between because the space was captured along with the middle name. Then append \1 the last name.
If the names could be possibly more than [A-z]+, you may alternatively use [\S]+ to capture all non-whitespace characters.
How about this:
:%s/\([[:alpha:]]\+\), \([[:alpha:]]\+\)\( [[:alpha:]]\+\.\?\)\?/\2\3 \1/g
This captures last, middle (optional), and first, and reorders them in the replacement. You'll probably need to include additional characters in the [[:alpha:]] collection, but this works for your example.
For more information, learn how the excellent and comprehensive :help is structured; all the information is in there (you just need to know how to find it)! There are also many very similar regular expression questions here on Stack Overflow.
Related
I have a file that is out-of-date and needs to be updated. The names have changed somewhat and I would like to clean them all up using a single substitution.
Here's what I'm trying to accomplish:
foo.foo_[single word] -> foo_bar.foo_[single word]_bar
where a single word is a string of n characters. In the file, they are always preceded by an underscore, but it needs to have "_bar" appended. There is always a "." after these instances, so I thought the following might work:
%s/foo\.foo_*\./foo_bar\.foo_*_bar\./g
Sadly, the first part doesn't even match what I want, so I'm back to square one.
I would first change:
foo_[word] -> foo_[word]_bar
and then
foo. -> foo_bar.
i.e.:
%s,\(foo_\w\+\),\1_bar,g|%s,foo\.,foo_bar\.,g
There are many ways to skin a cat but following should do the trick
%s/\vfoo.foo_(\w+)/foo_bar.foo_\1_bar/gc
what loosely translates to
\v Very Magic (:help magic)
foo.foo_ Search for exact string
(\w+) Search for a "word" and store in a backreference
/foo_bar.foo Replace search pattern with this exact string
\1 appended with backreference 1
_bar appended with _bar
or if you don't want to repeat the search in the replace part, you can go a bit nuts with backreferences and use
%s/\v(foo)\.foo_(\w+)/\1_bar.\1_\2_bar/gc
The most important parts you were missing were
using backreferences (:helpgrep backref)
using character classes (:h \w)
using repetition (_* is searching for 0 or more underscores. You probably meant _.*)
I have the following string in the code at multiple places,
m_cells->a[ Id ]
and I want to replace it with
c(Id)
where the string Id could be anything including numbers also.
A regular expression replace like below should do:
%s/m_cells->a\[\s\(\w\+\)\s\]/c(\1)/g
If you wish to apply the replacement operation on a number of files you could use the :bufdo command.
Full explanation of #BasBossink's answer (as a separate answer because this won't fit in a comment), because regexes are awesome but non-trivial and definitely worth learning:
In Command mode (ie. type : from Normal mode), s/search_term/replacement/ will replace the first occurrence of 'search_term' with 'replacement' on the current line.
The % before the s tells vim to perform the operation on all lines in the document. Any range specification is valid here, eg. 5,10 for lines 5-10.
The g after the last / performs the operation "globally" - all occurrences of 'search_term' on the line or lines, not just the first occurrence.
The "m_cells->a" part of the search term is a literal match. Then it gets interesting.
Many characters have special meaning in a regex, and if you want to use the character literally, without the special meaning, then you have to "escape" it, by putting a \ in front.
Thus \[ and \] match the literal '[' and ']' characters.
Then we have the opposite case: literal characters that we want to treat as special regex entities.
\s matches white*s*pace (space, tab, etc.).
\w matches "*w*ord" characters (letters, digits, and underscore _).
(. matches any character (except a newline). \d matches digits. There are more...)
If a character is not followed by a quantifier, then exactly one such character matches. Thus, \s will match one space or tab, but not fewer or more.
\+ is a quantifier, and means "one or more". (\? matches 0 or 1; * (with no backslash) matches any number: zero or more. Warning: matching on zero occurrences takes a little getting used to; when you're first learning regexes, you don't always get the results you expected. It's also possible to match on an arbitrary exact number or range of occurrences, but I won't get into that here.)
\( and \) work together to form a "capturing group". This means that we don't just want to match on these characters, we also want to remember them specially so that we can do something with them later. You can have any number of capturing groups, and they can be nested too. You can refer to them later by number, starting at 1 (not 0). Just start counting (escaped) left-parantheses from the left to determine the number.
So here, we are matching a space followed by a group (which we will capture) of at least one "word" character followed by a space, within the square brackets.
Then section between the second and third / is the replacement text.
The "c" is literal.
\1 means the first captured group, which in this case will be the "Id".
In summary, we are finding text that matches the given description, capturing part of it, and replacing the entire match with the replacement text that we have constructed.
Perhaps a final suggestion: c after the final / (doesn't matter whether it comes before or after the 'g') enables *c*onfirmation: vim will highlight the characters to be replaced and will show the replacement text and ask whether you want to go ahead. Great for learning.
Yes, regexes are complicated, but super powerful and well worth learning. Once you have them internalized, they're actually fairly easy. I suggest that, as with learning vim itself, you start with the basics, get fluent in them, and then incrementally add new features to your repertoire.
Good luck and have fun.
I am a beginner at Vim and I've been reading about substitution but I haven't found an answer to this question.
Let's say I have some numbers in a file like so:
1
2
3
And I want to get:
(1)
(2)
(3)
I think the command should resemble something like :s:\d\+:........ Also, what's the difference between :s/foo/bar and :s:foo:bar ?
Thanks
Here is an alternative, slightly less verbose, solution:
:%s/^\d\+/(&)
Explanation:
^ anchors the pattern to the beginning of the line
\d is the atom that covers 0123456789
\+ matches one or more of the preceding item
& is a shorthand for \0, the whole match
Let me address those in reverse.
First: there's no difference between :s/foo/bar and :s:foo:bar; whatever delimiter you use after the s, vim will expect you to use from then on. This can be nice if you have a substitution involving lots of slashes, for instance.
For the first: to do this to the first number on the current line (assuming no commas, decimal places, etc), you could do
:s:\(\d\+\):(\1)
The \(...\) doesn't change what is matched - rather, it tells vim to remember whatever matched what is inside, and store it. The first \(...\) is stored in \1, the second in \2, etc. So, when you do the replacement, you can reference \1 to get the number back.
If you want to change ALL numbers on the current line, change it to
:s:\(\d\+\):(\1):g
If you want to change ALL numbers on ALL lines, change it to
:%s:\(\d\+\):(\1):g
You can do what you want with:
:%s/\([0-9]\)/(\1)/
%s means global search and replace, that is do the search/replace for every line in the file. the \( \) defines a group, which in turn is referenced by \1. So the above search and replace, finds all lines with a single digit ([0-9]), and replaces it with the matched digit surrounded by parentheses.
I have several functions that start with get_ in my code:
get_num(...) , get_str(...)
I want to change them to get_*_struct(...).
Can I somehow match the get_* regex and then replace according to the pattern so that:
get_num(...) becomes get_num_struct(...),
get_str(...) becomes get_str_struct(...)
Can you also explain some logic behind it, because the theoretical regex aren't like the ones used in UNIX (or vi, are they different?) and I'm always struggling to figure them out.
This has to be done in the vi editor as this is main work tool.
Thanks!
To transform get_num(...) to get_num_struct(...), you need to capture the correct text in the input. And, you can't put the parentheses in the regular expression because you may need to match pointers to functions too, as in &get_distance, and uses in comments. However, and this depends partially on the fact that you are using vim and partially on how you need to keep the entire input together, I have checked that this works:
%s/get_\w\+/&_struct/g
On every line, find every expression starting with get_ and continuing with at least one letter, number, or underscore, and replace it with the entire matched string followed by _struct.
Darn it; I shouldn't answer these things on spec. Note that other regex engines might use \& instead of &. This depends on having magic set, which is default in vim.
For an alternate way to do it:
%s/get_\(\w*\)(/get_\1_struct(/g
What this does:
\w matches to any "word character"; \w* matches 0 or more word characters.
\(...\) tells vim to remember whatever matches .... So, \(w*\) means "match any number of word characters, and remember what you matched. You can then access it in the replacement with \1 (or \2 for the second, etc.)
So, the overall pattern get_\(\w*\)( looks for get_, followed by any number of word chars, followed by (.
The replacement then just does exactly what you want.
(Sorry if that was too verbose - not sure how comfortable you are with vim regex.)
I always wanted to know, how you can substitute within given parameters.
If you have a line like this:
123,Hello,World,(I am, here), unknown
and you wnat to replace World with Foobar then this is an easy task: :%s/World/Foobar/
Now I wonder how I can get rid of a , which is wihtin the ( ).
Theoretically I just have to find the first occurance of ( then substitute the , with a blank until ).
Try lookahead and lookbehind assertions:
%s/([^)]*\zs,\ze.*)//
(\zs and \ze tell where pattern starts and end)
or
%s/\(([^)]*\)\#<=,\(.*)\)\#=//
The first one is more readable, the second one uses \( ... \) groupings with parentheses inside groups which makes it look like obfuscated, and \#<= which apart from being a nice ASCII-art duck is the lookbehind operator, and \#= that is the lookahead operator.
References: :help pattern (more detail at :help /\#=, :help /\ze, etc.)
You use the GUI and want to try those commands? Copy them into the clipboard and run :#+ inside Gvim.
Modifying slightly the answer of #Tom can give you a quite good and "a bit" more readable result :
%s/\(.*\)(\(.*\),\(.*\))\(.*\)/\1(\2\3)\4/
That way you will have : in \1 will store what is at the left outside of the parenthesis, \4 what is at the right outside of the parenthesis and \2 and \3 what is inside the parenthesis, respectively on the left (\2) and on the right (\3).
With that you can easily swap your elements if your file is organised as column.
You can also select the text you want to change (either with visual or visual-block modes) and enter the : to start the replace command. vi will automatically start the command with :'<,'> which applies the command to the selected area.
Replacing a , can be done with:
:'<,'>s/,/ /g
For your example, this is the same thing as suggested by #ubuntuguy
%s/\(.*\)(\(.*\),\(.*\)/\1(\2\3
This will do the exact replacement you want.
Yet another approach, based on the fact that actually you want to substitute only the first occurrence of , inside the parenthesis:
:%s#\((.\{-}\),#\1 #
Explanation:
:%s for substitution in the whole file (don't use % if you want to work only with the current line)
we can use # or : as a delimiter to make the command more readable
in (.\{-} we ask to find any symbol (dot) after the left parenthesis and the rest stands for 0 or more occurrence (as few as possible) of this symbol. This expression is put inside \(...\) to be able to refer to this group as \1 in the future.