I am trying to setup a script that will:
Connect to a windows share
Using LOAD DATA LOCAL INFILE, upload the two files into their appropriate db tables
Umount share
Situation:
I can currently vpnc into this remote machine
Problem:
I cannot
mount -t cifs //ip.address/share /mnt/point -o username=u,password=p,port=445
mount error(110) Connection timed out
I am attempting to do this manually first
Remote server is open to port 445
Questions:
Do I even need to vpnc in first?
Do I need to do route add for the remote ip/mask/gw after vpnc?
Thank you!
The mount.cifs file is provided by the samba-client package. This can be installed from the standard CentOS yum repository by running the following command:
yum install samba samba-client cifs-utils
Once installed, you can mount a Windows SMB share on your CentOS server by running the following command:
Syntax:
mount.cifs //SERVER_ADDRESS/SHARE_NAME MOUNT_POINT -o user=USERNAME
SERVER_ADDRESS: Windows system’s IP address or hostname
SHARE_NAME: The name of the shared folder configured on the Windows system
USERNAME: Windows user that has access to this share
MOUNT_POINT: The local mount point on your CentOS server
I am mounting to a share from \\10.11.10.26\snaps
Make a directory under mount for your reference
mkdir /mnt/mymount
Now I am mounting the snaps folder from indiafps02, User name is the Domain credentials, i.e. Mydomain in this case
mount.cifs //10.11.10.26/snaps /mnt/mymount -o user=Girish.KG
Now you could see the content by typing
ls /mnt/mymount
So, after performing your task, just fire umount command
umount /mnt/mymount
That's it. You are done.
no need to install "samba" and "samba-client", only "cifs-utils" using command
yum install cifs-utils
after that in windows share the folder you would like to mount in centos if you didn't do that already ("c:\interpub\wwwroot" in my case).
make sure you share it with a specific username whom your know the password for ("netops" in my case).
create a directory in centos in which you would like to mount the windows share in to ("/mnt/cm" in my case).
after that run that simple command as a root
mount.cifs //10.16.0.160/wwwroot /mnt/cm/ -o user=netops
centos will prompt you for the windows username password.
you are done.
Related
I want to copy file from Azure Linux VM to local Windows PC. Actually I remember, I could do this perfectly with the same command but now when I run the cmd it shows message as 100% done but when I go to tmp directory, I dont see the file there.
Here is the cmd I give on Linux VM:
scp -r mlopenedx#138.91.116.170:/edx/var/log/tracking/tracking.log /tmp/
And this is output I get:
tracking.log 100% 70KB 70.0KB/s 00:00
But when I see tmp folder I dont see the file.Can any on suggest me the answer.
I have tried things like: giving Home folder ~/ instead of /tmp/.
Also tried below cmd:
sudo scp -i ~/.ssh/id_rsa mlopenedx#MillionEdx:/edx/var/log/tracking/tracking.log /tmp/
The easiest way to do this is to run pscp from windows like this:
pscp mlopenedx#LINUXVMIP:/edx/var/log/tracking/tracking.log c:/someExistingFolder/tracking.log
to have pscp command you need to install PuTTY.
your command looks wrong as one of the paths needs to be Windows valid path C:/Folder/Folder/File.ext. If you are executing that command from Linux VM and 138.91.116.170 is your Linux vm IP address than you are copping files locally - you can try finding your log file on that linux in \tmp\ folder. In order for that to work from remote Linux to local Windows you would need public IP for your windows or some sort of tunnel that would allow this connection.
Also you are adding -r recursive copy and you are pointing to file.
This question already has answers here:
WinSCP connect to Amazon AMI EC2 Instance changing user after login to "root"
(6 answers)
Closed last year.
I am trying to use WinSCP to transfer files over to a Linux Instance from Windows.
I'm using private key for my instance to login to Amazon instance using ec2-user. However ec2-user does not have access to write to the Linux instance
How do I sudo su - to access the root directory and write to the Linux box, using WinSCP or any other file transfer method?
Thanks
I know this is old, but it is actually very possible.
Go to your WinSCP profile (Session > Sites > Site Manager)
Click on Edit > Advanced... > Environment > SFTP
Insert sudo su -c /usr/lib/sftp-server in "SFTP Server" (note this path might be different in your system)
Save and connect
Source
AWS Ubuntu 18.04:
There is an option in WinSCP that does exactly what you are looking for:
AFAIK you can't do that.
What I did at my place of work, is transfer the files to your home (~) folder (or really any folder that you have full permissions in, i.e chmod 777 or variants) via WinSCP, and then SSH to to your linux machine and sudo from there to your destination folder.
Another solution would be to change permissions of the directories you are planning on uploading the files to, so your user (which is without sudo privileges) could write to those dirs.
I would also read about WinSCP Remote Commands for further detail.
Usually all users will have write access to /tmp.
Place the file to /tmp and then login to putty , then you can sudo and copy the file.
I just wanted to mention for SUSE Enterprise server V15.2 on an EC2 Instance the command to add to winSCP SFTP server commands is :
sudo su -c /usr/lib/ssh/sftp-server
I didn't have enough Reputation points to add a comment to the original answer but I had to fish this out so I wanted to add it.
ssh to FreePBX and run the commands stated below in your terminal:
sudo nano -f /etc/sudoers.d/my_config_file
YourUserName ALL=(ALL) NOPASSWD:ALL
sudo systemctl restart sshd
Winscp:
under session login ==> Advanced ==> SFTP
Change SFTP Server to:
sudo /usr/libexec/openssh/sftp-server
I do have the same issue, and I am not sure whether it is possible or not,
tried the above solutions are not worked for me.
for a workaround, I am going with moving the files to my HOME directory, editing and replacing the files with SSH.
Tagging this answer which helped me, might not answer the actual question
If you are using password instead of private key, please refer to this answer for tested working solution on Ubuntu 16.04.5 and 20.04.1
https://stackoverflow.com/a/65466397/2457076
I am attempting to mount a remote directory located on my web server to a directory in my xUbuntu installedation hosted in a VirtualBox.
I'm using the following command syntax:
sshfs root#*.*.*.*:/var/www Desktop/RemoteMount
Using the file manager, I navigate to the Desktop/RemoteMount directory but find it entirely blank. The SSHFS command above executed with no indication of an error.
Completely by chance, I use the terminal to long list the contents of the Desktop/RemoteMount directory and it shows all the data I was expecting to see in the file manager.
Can anyone tell me why the file manager does not show my remotely mounted data and how I might fix it?
Thanks.
you are missing local mountpoint.
sshfs -o idmap=user mika#192.168.1.2:/home/mika/remotepoint /home/mika/localmountpoint.
And You need to have localmount folder exist.
thanks Mika
I'm sure this has been asked before but I have no clue what to search for
I am trying to create a custom Linux image (for the Raspberry Pi) - I am currently manipulating the filesystem of the .img but I've discovered it's not as simple as dropping in the binary :( if only...
What is the accepted way to "pre-install" a package on a disk image where you can only manipulate the filesystem and ideally not run it first? Am I best to boot up, install, and then create the image from that, or is there a way of doing it beforehand in the same way you can change configuration settings etc?
Usually, when I have to change something in a disk image, I do the following:
sudo mount --bind /proc /mnt/disk_image/proc
sudo mount --bind /sys /mnt/disk_image/sys
sudo mount --bind /dev /mnt/disk_image/dev
These action are needed as this folder are create during boot process, mounting them in your system image will emulate a full boot. Then, you can chroot on it safely:
sudo chroot /mnt/disk_image
You're now able to issue commands in the chroot environment:
sudo apt-get install chromium
Of course, change /mnt/disk_image to the path where you have mounted your filesystem. apt-get will only works on Debian based system, change it according to your distribution.
You could find problem connecting to the internet and it can be cause by DNS configuration. The best thing you can do, is to copy your /etc/resolv.conf file in the remote filesystem as this file is usually changed by dhcp and it's empty on chroot environment.
This is the only solution that gives you full access to the command line of the system you're trying to modify.
This is an untested idea:
The dpkg tool, which can install .deb packages, has a --root option which can set a different filesystem than the local / path.
From the man page:
--instdir=dir
Change default installation directory which refers to the
directory where packages are to be installed. instdir is
also the directory passed to chroot(2) before running
package’s installation scripts, which means that the
scripts see instdir as a root directory. (Defaults to /)
--root=dir
Changing root changes instdir to dir and admindir to
dir/var/lib/dpkg.
If you mount your image and pass its mountpoint as --root, it should work.
There are things like the Ubuntu Customization Kit which allow you to create your own version of the distro with your own packages.
Crunchbang even has a utility like this, which is the distro I have personally selected for experimenting with my Pi.
I'm a newbie in linux. I installed Fedora 16 OS as guest in virtualbox on Window 7. Now, I want to access share folder from Fedora. Here is something I did:
Install guest addtion [OK]
Make share folder link to virtualbox [OK]. Share folder path in Window 7: D:\share_folder_vm
In terminal program in fedora, I just run some commands:
[hoangphi#localhost ~]$ su
Password:
[root#localhost hoangphi]# cd Desktop/
[root#localhost Desktop]# mkdir share_folder
[root#localhost Desktop]# sudo mount -t vboxsf D:\share_folder_vm \share_folder
/sbin/mount.vboxsf: mounting failed with the error: Protocol error
[root#localhost Desktop]#
I got this message: /sbin/mount.vboxsf: mounting failed with the error: Protocol error
share_folder_vm is the folder in Win7 Host and share_folder is the folder in Fedora Guest.
My question: How can I fix this problem?
Install Oracle Guest Additions:
[host-hotkey (usually right Ctrl)] + [d],
Then:
sudo /media/VBOXADDITIONS_4.*/VBoxLinuxAdditions.run
You can now enjoy:
A guest that can run at native screen resolution
Ability to share files between host and guest
Share the clipboard (allowing you to copy and paste between host and guest).
To share folders set them up to be shared. Consider the permissions. Note that the host file permissions are transient. IOW if you can't write to file on host, the guest can't either.
After setting up the file to be shared create a destination if you don't have one:
mkdir -p ~/destination
Now mount it under the name you configured it with:
sudo mount -t vboxsf myFileName ~/destination
As an extra tip you can really exploit this feature to do things like:
- Use guest subversion client to create repository to mounted directory (you won't have a full svn client but the repo can be used in an IDE on the host).
- I personally use my guest to download and unpack binaries like Tomcat to a targeted mount. Yes you can use Linux to install things on Windows!
To unmount all shares:
sudo umount -f -a -t vboxsf
This thread has some great tips. However....
#GirishB's answer isn't correct - sorry. Jartender's is best.
Also, every post in here seems to assume you're logging in to the Linux guest as root, except for #tomoguisuru. Yuck! Don't use root, use a separate user account and "sudo" when you need root privileges. Then this user (or any other user who needs the shared folder) should have membership in the vboxsf group, and #tomoguisuru's command is perfect, even terser than what I use.
Forget running mount yourself. Set up the shared folder to auto mount and you'll find the shared folder - it's under /media in my OEL (RH and Centos probably the same). If it's not there, just run "mount" with no arguments and look for the mounted directory of type vboxsf.
For accessing a shared folder, YOU have to have "Oracle VM extension pack" installed.
Look at the bottom of this link, you can download it from there.
http://www.oracle.com/technetwork/server-storage/virtualbox/downloads/index.html
I just figured. You need to add a shared folder using VirtualBox before you access it with the guest.
Click "Device" in the menu bar--->Shared File--->add a directory and name it
then in the guest terminal, use:
sudo mount -t vboxsf myFileName ~/destination
Dont directly refer to the host directory
There's a simpler way I found when running Linux Mint.
Ensure you install the Guest Additions from the command line and that you have the folder(s) shared with "automount" and "make permanent" settings selected within "Shared Folders" tab of the Machine Settings
Launch the User management application from Application/Settings/System Setting/ menu selection (requires sudo) from within the Mint menu
In the "Privileges and Groups" tab, check the box next to the "vboxsf" group, and then apply and ok your way back out.
Any user within the vboxsf group has full access to any shared folders on each boot with no manual mounting or unmounting
I usually do the following in addition to the above just to have quick access
Open the Dolphin file manager and navigate to /media/
Right-Click on the shared folder and click "Add to Places"
You probably need to change your mount command from:
[root#localhost Desktop]# sudo mount -t vboxsf D:\share_folder_vm \share_folder
to:
[root#localhost Desktop]# sudo mount -t vboxsf share_name \share_folder
where share_name is the "Name" of the share in the VirtualBox -> Shared Folders -> Folder List list box. The argument you have ("D:\share_folder_vm") is the "Path" of the share on the host, not the "Name".
May be this can help other guys:
I had the same problem, and after looking with Google I found that can be because of the permissions of the folder... So, you need first to add permissions...
$ chmod 777 share_folder
Then run again
$ sudo mount -t vboxsf D:\share_folder_vm \share_folder
Check the answers here: Error mounting VirtualBox shared folders in an Ubuntu guest...
VirtualBox version has many uncompatibilities with Linux version, so it's hard to install by using "Guest Addition CD image". For linux distributions it's frequently have a good companion Guest Addition package(equivalent functions to the CD image) which can be installed by:
sudo apt-get install virtualbox-guest-dkms
After that, on the window menu of the Guest, go to Devices->Shared Folders Settings->Shared Folders and add a host window folder to Machine Folders(Mark Auto-mount option) then you can see the shared folder in the Files of Guest Linux.
There is a really simple tuturial here : http://my-wd-local.wikidot.com/otherapp:configure-virtualbox-shared-folders-in-a-windows-ho
telling to do:
sudo mkdir /mnt/vbox_share
sudo mount.vboxsf nameAddesAsShared /mnt/vbox_share
These are the steps to share a folder from Windows to Linux Virtual Box
Step 1 : Install Virtual Box Extension Pack from this link
Step 2: Install Oracle Guest Additions:
By pressing -> Right Ctrl and d together
Run the command
sudo /media/VBOXADDITIONS_4.*/VBoxLinuxAdditions.run
Step 3 : Create Shared Folder by Clicking Settings in Vbox
Then Shared Folders -> + and give a name to the folder (e.g. VB_Share)
Select the Shared Folder path on Windows (e.g. D:\VBox_Share)
Step 4: Create a folder in named VB_share in home\user-name (e.g. home\satish\VB_share) and share
mkdir VB_Share
chmod 777 VB_share
Step 5: Run the following command
sudo mount –t vboxsf vBox_Share VB_Share