I installed android studio.. it was working fine. Now all the sudden, none of the auto complete features are working.. I can type anything anywhere no variable checking, no help with functions or checking anything. I can still compile the project and I get errors when that happens.
Can anyone please help me out with this issue.
#1 From Build menu (of your Android Studio), click Rebuild Project option.
#2 Then once rebuild completes, go to File > Invalidate Caches / Restart... and Click on Invalidate an Restart button.
This really works for me.
Source: https://code.google.com/p/android/issues/detail?id=61844#c4
#1 Rebuild is required, because Android-Studio does simply rely solely on Gradle's build-result (without static-analysis support, at least at time of writing, 2022).
#2 Clearing cache is required, because the previous build-result (before above rebuild) may be indexed, which makes Android Studio ignore latest Gradle build-result
(this is a very good speed optimization, but a very bad Developer-experience as well).
There can sometimes be other reasons too, which is why there are many other answers posted here.
You can also check if Power Save Mode on File menu is disabled.
Close Android Studio
Go to C:\Users\UserName\.android and rename the folder:
build-cache to build-cache_old
Go to C:\Users\UserName\.AndroidStudio3.x\system
OR (for Android studio 4 and Higher) go to C:\Users\UserName\AppData\Local\Google\AndroidStudio4.x
and rename these folders:
caches to caches_old
compiler to compiler_old
compile-server to compile-server_old
conversion to conversion_old
external_build_system to external_build_system_old
frameworks to frameworks_old
gradle to gradle_old
resource_folder_cache to resource_folder_cache_old
Open Android Studio and open your project again.
Originally use:
compileSdkVersion 32
targetSdkVersion 32
And an update to 33 appeared, I updated it and the suggestions in the XML no longer appeared, I went back to 32 and now the suggestions appeared.
Close Android Studio
Go to c_users_path_on_windows/.AndroidStudio3.5/system/
Delete the cache folder
Start Android Studio
This works for me.
Most of the times i have seen that the problem is that Power Save Mode is enabled, to disable go to Current inspection profile (lower right corner in Android Studio).
I have not run into this problem personally, but try checking the following settings (File -> Settings or Alt+F7):
Project Settings [name]
Inspections - ensure that Android and Android Lint is checked, or alternately just set it back to default using the dropdown box at the top.
IDE Settings
Editor -> Code Completion - ensure the Autopopup code completion is checked (and check the rest of the settings based on your preference.
Uncheck "Power Save Mode" in "File" tab
If nothing works (like happened with me ) go to your user profile in windows at %userprofile% . You will find folders there (hidden) named with the version of the android studio you are using and prefixed with a dot.
like .AndroidStudio3.1. Just delete that .
Solution: Try disabling "File -> Power Save Mode" in Android Studio (Beta) 0.8.14 - Mac OS X
On windows, the option can be at some other place.
I had the same problem then I recalled that while exploring the new android studio, I switched on the "File -> Power Save Mode" to see what it does?
I disabled the power save mode and all those intelligent features were back.
It turned out that in Power Save Mode, Android Studio switches off the modules responsible for features like Smart Code Completion and Code Analysis.
I had a similar problem where none of the other solutions worked.
Closing Android Studio and then deleting the .idea and build folders resolved the issue.
Disable Power Save Mode and Invalidate Cache and Restart.
For Artic Fox 2020|3.1 Version: Auto Complete Suggestion Problem.
Please Follow the Following Steps:
Close Android Studio
Locate caches folder in C:\Users{username}\AppData\Local\Google\AndroidStudio2020.3
and Delete it.
Open Android Studio Again.
Check your Android studio version and Target that version folder at below location
C:\Users{username}\AppData\Local\Google
Note : AppData folder is Hidden in Windows
This Solution also works if android studio mess up with xml files and java code. Don't! modify your code otherwise IDE won't able to change it to default. If you see such messy code just follow above steps and your code will be fine again.
It's Working
Disable Power Save Mode
Untick Power Save Mode Option ::
File -> Power Save Mode
There is a power saver mode in android studio if accidentally you click on that it will disable code analysis which will reduce the battery consumption and performance will also increase but it will not detect any errors and do auto complete operations.
To disable power saver mode
- Go to File Menu of Studio
- Uncheck The Power Saver Mode
In your IDE code analysis will be shown using an eye symbol at the right corner of your android studio.
If Green means it is enabled and there is no error in your code.
If Red Means It is enabled but there are few errors in your code.
If It is white or blur then code analysis is disabled
Just remove all the folders named AndroidStudioPreview
On Windows:
Go to your User Folder - on Windows 7/8 this would be:
[SYSDRIVE]:\Users[your username] (ex. C:\Users\JohnDoe)
In this folder there should be a folder called .AndroidStudioPreview
On Mac OS X
Remove these files:
~/Library/Application Support/AndroidStudioPreview
~/Library/Caches/AndroidStudioPreview
~/Library/Logs/AndroidStudioPreview
~/Library/Preferences/AndroidStudioPreview
There can be several things which cause this.
Make sure you've write the correct version in targetSdkVersion and compileSdkVersion.
Make sure targetSdkVersion and compileSdkVersion are same.
Other solutions can be:
Invalidate caches & restart Android Studio from File → Invalidate Caches / Restarts...
Clean your project from Build → Clean Project
Rebuild project from Build → Rebuild Project
Make project from Build → Make Project [this process may take some time]
Be sure to check for IDE errors by clicking the button at the bottom right of android studio.
In my case, there was a bad plugin, and the IDE Fatal Errors window prompted me to uninstall the plugin. (I wish I'd known about this feature before spending half a day invalidating caches, deleting folders, and reinstalling android studio with no luck.)
It worked for me.
From menu select:
File -> Power Save Mode
and make sure it's disabled
Go TO Left Side Top File Option
Then Click To Power Save Mode
Disable Power Save Mode That Fix This Issue
In my case, when I switch keyboard language to English, the auto complete works again.
if the autocomplete isn't working for you in Android Studio, just press File and uncheck the Power save mode, it should work fine after that.
if power save mode is already unchecked then first check then uncheck them.
If you have a library project included, make sure the library has the dependencies in build.gradle listed using the api configuration, not the implementation configuration.
Also make sure that the project that includes the library has all the dependencies listed (using the implementation configuration is fine here).
'The file size (2561270 bytes) exceeds configured limit (2560000 bytes). Code insight features are not available.'
Had this issue for days with none of these proposed solutions working before eventually getting this message in yellow under the tabs after adding a line of code. Removing the line of code eliminated the message but not the issue. There appears to be a code size window where you lose insight features but don't get this message, at least for me. Once you go over a certain point the message finally pops up. The suggested solution in a different thread for this issue was to edit 'Help/Edit Custom Properties' to increase the configured limit, but just opening this brought up a dialogue asking if I wanted to create an 'idea.properties' folder so I decided not to risk that approach over eventually cutting the file size.
If sometimes this problem can occur if you misspelled a file extension or make a file without adding an extension.
Check you have added the file extension correctly.
I think that answer may help you.
I'm using mac and suddenly the code completion (^space) not working. There are no errors. Turned out the android studio's shortcut was conflicted with system's shortcut. I don't know why it suddenly happen because it was fine before, maybe there was an update on my Mac.
See below setting for the conflicting shortcut
In my case, C:\Users\UserName\AppData\Local\Google\AndroidStudio2020.3\ just delete caches folder and restart android studio. after deleting this caches folder my problem was solved :)
I encounter with this problem while adding a kotlin library into my project on mac. Changing macbook language to english solved this problem. I also had some weird problems with auto-generated databinding codes, those are also solved.
Try Invalidate caches/Restart from File in Menu Bar from android studio.
Close Android Studio
Go to
C:\Users\YOUR_USERNAME\.android
and rename the following folder to:
build-cache to build-cache_old
then Go to (Android studio lower then version 4)
C:\Users\UserName.AndroidStudio3.x\system
OR (Android studio 4 and Higher) Go to
C:\Users\UserName\AppData\Local\Google\AndroidStudio4.x
or
C:\Users\UserName\AppData\Local\Google\AndroidStudio2021.2
depending on your version and rename these folders:
caches to caches_old
compiler to compiler_old
compile-server to compile-server_old
conversion to conversion_old
external_build_system to external_build_system_old
frameworks to frameworks_old
gradle to gradle_old (if exists)
resource_folder_cache to resource_folder_cache_old (if exists)
Open Android Studio again and the autosuggsion will be fixed.
and You can also check if Power Save Mode is disabled or not from the File menu.
Related
I'am a newby in android studio and learning a lot, but now have a problem where i cannot seem to find the answer to.
In android studio you can visualy drag&drop your screen.
I have seen it can do al lot (although you sometimes need the xml) but for me it is not working at all.
I mean i cannot drag&drop any widgets on the screen at all.
Tried changing the theme: no help (really tried a lot of them)
Tried a complete new project: same story
Tried other APK verion: same story
Tried Invalidatd caches / restart: no help
Even with a new project (EmptyActivity) it add's a android.support.v4.widget.NestedScrollView and then gives error's on that
(Failed to find style 'coordinatorLayoutStyle' in current theme).
It also gives an error on layout_height/layout_with not being there. But they are there for each widget.
Please do not missunderstand: when i execute the project i runs just fine (both on phone and emulator) but the visual builder for the screen.....:-(
Does somebody knows how to solve this.
If more info is needed please ask.
Any help is more than welcome.
There are several things that could be causing this:
Your caches could be messed up. Try going to
File > Invalidate Caches / Restart ... (I know that you already tried this, but posting for future views.)
Also, make sure that you don't have Drag-n-Drop with ALT pressed only checked in your Settings (Appearance & Behavior - Appearance).
Finally, in a default project created in Android Studio, there are two XML files created for each layout. For example, content_main.xml is embedded within activity_main.xml. Make sure that you are using content_main.xml for your design work.
In the end i fixed it by changing the SDK version in de gradle file.
still do not understand why it was wrong as studio genereded it that way but now it works so.... for me: case closed.
I tried fixing this for ages now, but I don't know what to do. How do I get it to display a preview? Here is a screenshot of the code:
Solved :
Try 1 : Just close and open the Android Studio
Try 2 : Build -> Clean project -> rebuild
Try 3 : Build -> Clean project -> rebuild -> restart Android studio
Mi
From Menu Open file option and choose option Close Project.
then restart your project android.
this will resolve your issue.
in my case, clean and build didn't work, I just close the project and open it again, it's solved
The attached screenshot shows your Project is not sync properly. Here are some of the possible steps:
Use Sync Project with Gradle Files for more Here is answer with more detail.
If you made huge changes to project or changed package names etc. use rebuild
In menu Build => Rebuild Project.
Preview may not show if an API is selected that is not properly installed. Check Answer here.
One of the above should fix the problem. If none of the above work try restarting IDE (Android Studio).
Follow these steps-
If you have any incomplete statement(s) in your code (probably where
you left it last time) then comment those lines to make them
inactive.
Go to Build=>Rebuild to rebuild the project.
Uncomment those lines to make them active again and you are done!!
Close the android studio and reopen the project again.
If not work replace all 'compile' with 'implementation' from build.gradle file.
Because it is obsolete now and will be removed at the end of 2018.
I solved this kind of problem like that.
I tried above answers. But, sometimes they work and sometimes not.
I tried -
File -> Invalidate Caches/ Restart -> Invalidate and restart
And it always works for me.
I do this to solved the problem:
type Ctrl + Shift + A to open the "Actions" search window
input "Sync Project with Gradle Files" , then type Enter
wait for Sync finished
I'm here today because I'm having an issue with Android Studio. I don't know if it existed on previous versions (I don't remember this being an issue, so I doubt it was a problem on a previous version), but currently I am using the Android Studio V2.1 Stable release.
My issue is that if I launch Android Studio (I happen to be on Windows, 64-bit Android Studio) and at the Start Screen/Page, I click Configure>Settings>Editor>Code Styles, and change the default parameters on any of the languages (XML, Java, HTML, etc.), the Default profile is copied to a new profile (Default(1)) and the new settings get applied to each profile.
If I Apply these changes and exit Android Studio, and launch back up and follow the same method...the settings have completely gone back to what they were before I changed them, with the exception of the Default(1) copy profile. But from my experience, Android Studio doesn't build new projects based on this Default(1) copy profile, it builds them on the Default profile. Which means all of my adjustments to using indents and not spaces, keeping indents on empty lines, etc. all do not get carried through to the actual project files, leaving me to have to go back into the settings with the project loaded up and change all of these parameters again. That's just asinine. Please tell me I'm missing something here and that there's a simpler way of achieving the ability to keep a code style template that I can use on all of my projects!
Perhaps it would be better to report or consult on this using the Android Studio feedback site. If that's the better option, I'm willing to do that too.
Thanks everyone!
What I do in that case is
Go to Preferences
Code Style
Select scheme you want
Click Settings cog
Click copy to project
Some OKs and then it works.
After selecting the code style that i want, opened the gradle.properties file in root folder of the project and deleted the following line
kotlin.code.style=official
deleting the above line, prevents the code style resetting to default.
Go to Preferences
Code Style
Set Scheme to Default [IDE]
Click restore defaults
The simplest way I found to reset the default settings is as follows:
In Android Studio, click on File.
Settings (Ctrl + Alt + S)
Under Editor in settings
Select Code Style
Next to Scheme: select the three dots to access the scheme options ()
Select Restore Defaults
A Confirmation Dialog Box will be displayed to confirm if you want to revert back to
the default settings.
I am creating a new project with Blank Activity in Android Studio.
Then VCS > Enable Version Control Integration > Git > OK.
After that I am closing the project and immediately I am opening it.
I am opening Setting > Version Control and it turns out that settings duplicate.
If I close and open the project again, one more backup line appears. And the quantity of such duplicating lines increases with every start.
Please, could you explain me, if it is normal or I do something wrong? Thanks a lot for you response.
http://hsto.org/files/806/992/9a6/8069929a60724887b55805b4fd6868e9.png
I am unable to see the folders that are physically existing, this is the case.
But in actual fact I have other folders as welll
So what can I do?
Above your the file directory view in Android Studio is a drop down which currently is most likely set to Android. Change it to Project and you should be able to see all your files.
I tried the all the approaches mentioned above but can't fix rather than fix it by a hardcore approach -
Step 1. Close your Android studio.
Step 2. Delete .gradle and .idea folder from your project directory.
Step 3. Open your project and you will see the files again.
go to View menu then click tool window then after click on project
view->toolwindow->project
it worked for me
for me doing the following works:
from menu go to: View--->tool windows ---> Project
then click the little gears icon (settings) you will see an option to change the empty middle packages. it looks like this:
disable "Hide Empty Middle Packages" under the Project View settings dropdown and then it should make everything show up.
If anyone ever does what I did maybe this will help:
Android Studio does not like it when module names begin with a number. I was learning from some tutorials and named the first module "1-name" and the next one "2-name". Setup was fine and it ran, but only the "Gradle" Scripts entry would show in the navigation window in "Android" mode.