I'm trying to do some practices on a MDI application in Microsoft Visual Studio 2012 but it seems that I'm doing something wrong.
I made a new Windows Forms Application project and changed the IsMdiContainer property of the first form to True. Then I add a new form by right clicking the project in solution explorer and selecting Add - New Item - Windows Form.
I'm trying to set MdiParent property of form2 to the MDI Container form, but it seems that form2 has no MdiParent property.
Here's the properties of form2 sorted alphabetically.
Of course I can open form2 as a child form this way:
form2 newMDIChild = new form2();
newMDIChild.MdiParent = this;
newMDIChild.Show();
I just wondered why the forms has no MDIParent property.
According to this page the child forms have a MdiParent property.
Any kind of help is much appreciated.
You're doing it right, instantiating the new form and assigning MdiParent there. Really there IS such a property, and in your code you're using it:
newMDIChild.MdiParent = this;
This is perfectly fine and the normal way of doing it.
Now, what you're pointing is that the designer doesn't shows it, which is also true. That don't means that the property don't exist (it does, and you're using it in fact!). Why it isn't in the designer property sheet is another history, totally irrelevant, but I suppose that it has to do with the fact that it's difficult, if not impossible to properly set MdiParent at design time. If you think about it, it must contain an instance of another form (with it's IsMdiContainer set to true). At design time, you don't have any instances of anything, as they're created as your program runs. There is no way that you can set it beforehand, as you must normally pass another form to it, which you can't know while designing.
Related
I have created a custom module (actually I have created a handful in recent years, and this same obstacle frustrates me every time) following the Kentico documentation:
https://docs.kentico.com/display/K9/Creating+custom+modules
The problem I end up with every time, is in developing the User Interface for Parent/Child classes. I create a Vertical Tab node, and beneath it I add an edit tab and a Binding tab for the child class. This all works, and I can add and remove bindings at will, but what I can't do is ADD a new child class and bind it.
Using the Standard Edit Binding template, I am able to bind EXISTING Job Titles to the selected Category, but I cannot CREATE a new one from that page:
To solve this, I created a custom Edit Binding template, and added a New Child Class Header Action that points to a New / Edit Object child:
Which gives me a button that I can use to add a new child class (Job Title):
This approach works per se, in that I can click the New Job Title button and create a new item on the subsequent page:
But no binding is created to link the child object (Job Title) to the selected parent object (Category), An even bigger problem is that once I click Save, I am presented with the following:
The new object DOES SAVE, but the post-save navigation is somehow failing. The event log offers little in the way of diagnostics:
So I thought to create a completely custom interface to accomplish my needs here, according to the Kentico documentation:
https://docs.kentico.com/display/K9/Manually+creating+the+interface+for+custom+modules
So I change the Element Content of the New Job Title page to a custom page that I created to post a DataForm for the new object:
Taking care to assign the proper Object Types on the Properties Tab:
The intent was to programmatically create the binding upon save and also handle the correct navigation to avoid the ambiguous parameter error above, but when this page loads, the UIContext.ObjectID and UIContext.ParentObjectID are both 0:
So I cannot create the binding programmatically. I was able however to solve the error that I received by manually assigning the redirect. The experience is still lacking even with this hack, since it returns to the listing page, but the user still has to click "Add Items" to assign the binding after successfully creating it with the custom page I built.
This cannot be the proper way to do this, so any help with getting me on the right track would be greatly appreciated.
In order for the EditedObject to have a value you have to either decorate the page with the EditedObjectAtribute e.g. like this:
[EditedObject("<custom.objecttype>", "<objectid>", ...)]
or set the object yourself:
int objectId = QueryHelper.GetInteger("objectid", 0);
EditedObject = SomeInfoProvider.GetSomeInfo(objectId);
In your case, I'd recommend exploring what query parameters are available on the page and using them to fetch appropriate object(s). Also, make sure "JobCategoryId" is passed to the "New Job Title" dialog so that you can create the binding.
Btw - kudos for well asked question!
I'm new to Domino Designer. I'm trying to modify an existing application which is running on a remote server. I create a blank xPage and view in browser and it works. I add a label and view in browser and it works. I add a combo box and setup a data source for my xPage. The data source is in the current application and I'm using a view. I setup my combo to point to that data source and specify BindTo value. I view it in browser and I get Error 500 "HTTP Web Server: Command Not Handled Exception" I can open the view that I've used and see all the data in the view. I can even add, edit, and delete from the view.
Ideas... Thnxs in advance.
Additional Info. I've added a "View" from "Container Controls" and used the same data source and the same view and it also works in the browser.
The error being printed is:
javax.faces.el.PropertyNotFoundException: Error getting property 'CompanyName' from bean of type lotus.domino.local.View
com.sun.faces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:119)
com.ibm.xsp.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:144)
com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:182)
com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:163)
com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:257)
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:150) ....
This was already answered in the comments, but I want to write a better answer.
The problem in this case is that a view data source is being used for editing a document. Directly, this is not a possibility, though there are a few great ways to get around this. The first way, and my favorite, is to use an inline form. I think the Extension Library Demo database offers a few great examples of how to go about doing this. One way is to use a tooltip dialog. Another way is an inline form. A repeater is used and for every row in the view, a hidden panel can be made which contains the document data source and all field which are required to be changeable. By clicking on a button or link, the panel is made visible. This is my favorite variant because it is simple, quick, and generally looks great.
Another way to go about this is to have a view data source only, but use scripts to retrieve the document and set the values in the background and then save and release. It all depends on what you are trying to achieve.
My main recommendation is to look at the ExtLib demo and take a look at what they are doing there.
I'm trying to bind a UITableView to an ObservableCollection<MyTypeViewModel> using MvxStandardTableViewSource, and I'm getting weird behavior and bindings that aren't working
The (partial) code is this:
tblFeatures = new UITableView ();
mSource = new MvxStandardTableViewSource(tblFeatures, "TitleText Name");
var set = this.CreateBindingSet<MyTypeView, MyTypeViewModel> ();
set.Bind(mSource).To (vm => vm.Objects);
set.Bind(mSource).For(s => s.SelectedItem).To (vm => vm.SelectedObject);
set.Apply ();
What I'm seeing is that when I select an item in the table, it does update SelectedObject with the new value. But when I change SelectedObject by some other means, the table does not update the displayed selected item. I have verified that the SelectedObject really is being changed, by setting a breakpoint and by binding another control to it; the other control (a label) does change as the selection changes, but the UITableView does not.
Am I doing something wrong, or could this be an issue in MVVMCross?
The selecteditem binding was requested as a 'nice to have' and was mainly requested for the user story where a user clicks on a list item - so this is currently a 'one way to source' implementation.
The very basic details and some code can be found via - https://github.com/slodge/MvvmCross/issues/278
In truth, the current binding is abusing the 'selected' paradigm - as it doesn't really reflect the selection state of the cell and also has no handling of mutiselect - instead it just lets the viewmodel know the latest tapped item.
If there are genuine user stories/requirements for full two'way binding, then these should be addable - eg if the user story were for scrolling the item into view then 'scrollToRowAt' could be used - see How to scroll UITableView to specific position - but this again might not be true 'selection' within the uitableview.
if you wanted to implement this yourself it should be fairly straight-forward to override the binding with your own one (see the custom binding n+1 in http://mvvmcross.wordpress.com for an intro on custom bindings).
could this be an issue in MVVMCross?
Overall I think I'd categorise it as a known limitation of that particular binding caused by lack of user demand and by some confusion over whether selection genuinely means selection in the touch screen era.
if it was logged as a bug I'd say it wasn't.. If it was logged ss a feature request I'd try getting as much user input as i could about what devs really want from this, whether they want true cell selection or scroll into view, both or something more.
By other means you mean not from UI thread I presume. Please try by invoking the change on UI thread.
I have an Xpages application that pulls data from another .nsf file. I have a view panel linked to a view in that db. The view has documents with several different forms in it. I want to be able to open each document in it's own form(xpage).
How do I write a computed At Runtime, open selected document using: statement that will select the correct Xpage to present the document.
If you use the Data View component instead of a View Panel, you can compute the pageName attribute, referencing the var attribute to return a different value for each row based on the document that row represents. The flexibility of the Data View component also makes it easier to make your app look more like a modern web application and less like an Excel spreadsheet. As an additional bonus, the mobile theme invokes a renderer that makes each Data View instance look like a native mobile list, so using Data Views instead of View Panels simplifies mobile development.
You have 2 options:
use "use xpage associated with form" and edit the form's property
use a SSJS formula to compute the Form. You provide a variable name in the view control var to access a view row as XSPViewEntry. If the Form is in a view column even one you don't display you use .getColumnValue otherwise getDocument.getItemValueString
Does that work for you?
Maybe this mothed can help you: Unable to get document page name for
Hope this helps
Mark
I had a similar problem today. I use only one form but 3 different xpages for associated with this form. I have 3 different document types in the view. I used rowData the get the type of the document.
try{
var v=rowData.getColumnValue("form");
if(v.indexOf("x")> -1){var page ="x.xsp"}
else if(v.indexOf("y") > -1){var page = "y.xsp"}
else{var page = "z.xsp"}
}catch(e){
var page = "x.xsp"
}
So to your view you can create a column with the value of the form and you can use it.
I have used the extension library Dynamic View control which has an event you can code to get a handle to the NotesViewEntry which was selected. See the demo database page Domino_DynamicView.xsp and the Custom Event Handler tab for an example.
Note, in 8.5.3 (I have not upgraded yet) if you add or edit the eventHandler for onColumnClick it will be added to the XPages source as an xe:eventHandler. It needs to be an xp:eventHandler to work. The way to do it is to copy the code in the source from the exiting event and delete it. Recreate the event and update the code. Then go back into the source and change the tags within the eventHandler to xp:.
This is a rather strange one I think, and I'm sure I made a mistake here myself:
in one of my applications I'm showing a fileDownload control bound to a Richtext field in my underlying NotesDocument. The control's properties a are set to Hide if no attachments, show size, type and created as well as allow delete. The control itself sits inside a custom control, being part of another custom control, similar to this:
Xpage.xsp
- ccContainer
- - ccInnerDoc
Document datasources for both the container and the "inner" doc are defined at the root of ccContainer and passed into the inner doc.
The inner doc's datasource is comnputed based on a document selection, and it's igenoreRequestParams property is set to false so that I can display the contents of the selected datasource in a given panel etc.
The selected doc is first opened in read mode, and I can set it to edit mode using a button.
Problem now is that my file download control always is showing the delete icon (trashcan) no matter which mode the doc is opened in. And it's not only the icon showing, it also pretends to work by asking me whether I really want to delete and then really removes the file attachment. Only that this change of course cannot be stored into the datasource because it's only open in read mode.
I'm sure that this behaviour is some side-effect of something else in my application (to a certain extent I rebuilt this in a plain new db and until now cannot reproduce it), but I'm at the end of my knowledge of what this could be.
Any hint of what could be causing this is more than welcome.
In place of #Frantisek Kossuth I answer this myself: see compute dynamically the allowDelete property of file download xpages
Thanks again, Frantisek!