Forward host port to docker container - linux

Question

Is it possible to have a Docker container access ports opened by the host? Concretely I have MongoDB and RabbitMQ running on the host and I'd like to run a process in a Docker container to listen to the queue and (optionally) write to the database.
I know I can forward a port from the container to the host (via the -p option) and have a connection to the outside world (i.e. internet) from within the Docker container but I'd like to not expose the RabbitMQ and MongoDB ports from the host to the outside world.
EDIT: some clarification:
Starting Nmap 5.21 ( http://nmap.org ) at 2013-07-22 22:39 CEST
Nmap scan report for localhost (127.0.0.1)
Host is up (0.00027s latency).
PORT STATE SERVICE
6311/tcp open unknown
joelkuiper#vps20528 ~ % docker run -i -t base /bin/bash
root#f043b4b235a7:/# apt-get install nmap
root#f043b4b235a7:/# nmap 172.16.42.1 -p 6311 # IP found via docker inspect -> gateway
Starting Nmap 6.00 ( http://nmap.org ) at 2013-07-22 20:43 UTC
Nmap scan report for 172.16.42.1
Host is up (0.000060s latency).
PORT STATE SERVICE
6311/tcp filtered unknown
MAC Address: E2:69:9C:11:42:65 (Unknown)
Nmap done: 1 IP address (1 host up) scanned in 13.31 seconds
I had to do this trick to get any internet connection within the container: My firewall is blocking network connections from the docker container to outside
EDIT: Eventually I went with creating a custom bridge using pipework and having the services listen on the bridge IP's. I went with this approach instead of having MongoDB and RabbitMQ listen on the docker bridge because it gives more flexibility.

Answer 1

A simple but relatively insecure way would be to use the --net=host option to docker run.
This option makes it so that the container uses the networking stack of the host. Then you can connect to services running on the host simply by using "localhost" as the hostname.
This is easier to configure because you won't have to configure the service to accept connections from the IP address of your docker container, and you won't have to tell the docker container a specific IP address or host name to connect to, just a port.
For example, you can test it out by running the following command, which assumes your image is called my_image, your image includes the telnet utility, and the service you want to connect to is on port 25:
docker run --rm -i -t --net=host my_image telnet localhost 25
If you consider doing it this way, please see the caution about security on this page:
https://docs.docker.com/articles/networking/
It says:
--net=host -- Tells Docker to skip placing the container inside of a separate network stack. In essence, this choice tells Docker to not containerize the container's networking! While container processes will still be confined to their own filesystem and process list and resource limits, a quick ip addr command will show you that, network-wise, they live “outside” in the main Docker host and have full access to its network interfaces. Note that this does not let the container reconfigure the host network stack — that would require --privileged=true — but it does let container processes open low-numbered ports like any other root process. It also allows the container to access local network services like D-bus. This can lead to processes in the container being able to do unexpected things like restart your computer. You should use this option with caution.

Answer 2

Your docker host exposes an adapter to all the containers. Assuming you are on recent ubuntu, you can run
ip addr
This will give you a list of network adapters, one of which will look something like
3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
link/ether 22:23:6b:28:6b:e0 brd ff:ff:ff:ff:ff:ff
inet 172.17.42.1/16 scope global docker0
inet6 fe80::a402:65ff:fe86:bba6/64 scope link
valid_lft forever preferred_lft forever
You will need to tell rabbit/mongo to bind to that IP (172.17.42.1). After that, you should be able to open connections to 172.17.42.1 from within your containers.

Answer 3

As stated in one of the comments, this works for Mac (probably for Windows/Linux too):
I WANT TO CONNECT FROM A CONTAINER TO A SERVICE ON THE HOST
The host has a changing IP address (or none if you have no network access). We recommend that you connect to the special DNS name host.docker.internal which resolves to the internal IP address used by the host. This is for development purpose and will not work in a production environment outside of Docker Desktop for Mac.
You can also reach the gateway using gateway.docker.internal.
Quoted from https://docs.docker.com/docker-for-mac/networking/
This worked for me without using --net=host.

Answer 4

You could also create an ssh tunnel.
docker-compose.yml:
---
version: '2'
services:
kibana:
image: "kibana:4.5.1"
links:
- elasticsearch
volumes:
- ./config/kibana:/opt/kibana/config:ro
elasticsearch:
build:
context: .
dockerfile: ./docker/Dockerfile.tunnel
entrypoint: ssh
command: "-N elasticsearch -L 0.0.0.0:9200:localhost:9200"
docker/Dockerfile.tunnel:
FROM buildpack-deps:jessie
RUN apt-get update && \
DEBIAN_FRONTEND=noninteractive \
apt-get -y install ssh && \
apt-get clean && \
rm -rf /var/lib/apt/lists/*
COPY ./config/ssh/id_rsa /root/.ssh/id_rsa
COPY ./config/ssh/config /root/.ssh/config
COPY ./config/ssh/known_hosts /root/.ssh/known_hosts
RUN chmod 600 /root/.ssh/id_rsa && \
chmod 600 /root/.ssh/config && \
chown $USER:$USER -R /root/.ssh
config/ssh/config:
# Elasticsearch Server
Host elasticsearch
HostName jump.host.czerasz.com
User czerasz
ForwardAgent yes
IdentityFile ~/.ssh/id_rsa
This way the elasticsearch has a tunnel to the server with the running service (Elasticsearch, MongoDB, PostgreSQL) and exposes port 9200 with that service.

Answer 5

TLDR;
For local development only, do the following:
Start the service or SSH tunnel on your laptop/computer/PC/Mac.
Build/run your Docker image/container to connect to hostname host.docker.internal:<hostPort>
Note: There is also gateway.docker.internal, which I have not tried.
END_TLDR;
For example, if you were using this in your container:
PGPASSWORD=password psql -h localhost -p 5432 -d mydb -U myuser
change it to this:
PGPASSWORD=password psql -h host.docker.internal -p 5432 -d mydb -U myuser
This magically connects to the service running on my host machine. You do not need to use --net=host or -p "hostPort:ContainerPort" or -P
Background
For details see: https://docs.docker.com/docker-for-mac/networking/#use-cases-and-workarounds
I used this with an SSH tunnel to an AWS RDS Postgres Instance on Windows 10. I only had to change from using localhost:containerPort in the container to host.docker.internal:hostPort.

Answer 6

I had a similar problem accessing a LDAP-Server from a docker container.
I set a fixed IP for the container and added a firewall rule.
docker-compose.yml:
version: '2'
services:
containerName:
image: dockerImageName:latest
extra_hosts:
- "dockerhost:192.168.50.1"
networks:
my_net:
ipv4_address: 192.168.50.2
networks:
my_net:
ipam:
config:
- subnet: 192.168.50.0/24
iptables rule:
iptables -A INPUT -j ACCEPT -p tcp -s 192.168.50.2 -d $192.168.50.1 --dport portnumberOnHost
Inside the container access dockerhost:portnumberOnHost

Answer 7

If MongoDB and RabbitMQ are running on the Host, then the port should already exposed as it is not within Docker.
You do not need the -p option in order to expose ports from container to host. By default, all port are exposed. The -p option allows you to expose a port from the container to the outside of the host.
So, my guess is that you do not need -p at all and it should be working fine :)

Answer 8

For newer versions of Docker, this worked for me. Create the tunnel like this (notice the 0.0.0.0 at the start):
-L 0.0.0.0:8080:localhost:8081
This will allow anyone with access to your computer to connect to port 8080 and thus access port 8081 on the connected server.
Then, inside the container just use "host.docker.internal", for example:
curl host.docker.internal:8081

Answer 9

why not use slightly different solution, like this?
services:
kubefwd:
image: txn2/kubefwd
command: ...
app:
image: bash
command:
- sleep
- inf
init: true
network_mode: service:kubefwd
REF: txn2/kubefwd: Bulk port forwarding Kubernetes services for local development.

Answer 10

Easier way under all platforms nowadays is to use host.docker.internal. Let's first start with the Docker run command:
docker run --add-host=host.docker.internal:host-gateway [....]
Or add the following to your service, when using Docker Compose:
extra_hosts:
- "host.docker.internal:host-gateway"
Full example of such a Docker Compose file should then look like this:
version: "3"
services:
your_service:
image: username/docker_image_name
restart: always
networks:
- your_bridge_network
volumes:
- /home/user/test.json:/app/test.json
ports:
- "8080:80"
extra_hosts:
- "host.docker.internal:host-gateway"
networks:
your_bridge_network:
Again, it's just an example. But in if this docker image will start a service on port 80, it will be available on the host on port 8080.
And more importantly for your use-case; if the Docker container want to use a service from your host system that would now be possible using the special host.docker.internal name. That name will automatically be resolved into the internal Docker IP address (of the docker0 interface).
Anyway, let's say... you also running a web service on your host machine on (port 80). You should now be able to reach that service within your Docker container.. Try it out: nc -vz host.docker.internal 80.
All WITHOUT using network_mode: "host".