I am using a bash script and I am trying to split a string with urls inside for example:
str=firsturl.com/123416 secondurl.com/634214
So these URLs are separated by spaces, I already used the IFS command to split the string and it is working great, I can iterate trough the two URLs with:
for url in $str; do
#some stuff
done
But my problem is that I need to get how many items this splitting has, so for the str example it should return 2, but using this:
${#str[#]}
return the length of the string (40 for the current example), I mean the number of characters, when I need to get 2.
Also iterating with a counter won't work, because I need the number of elements before iterating the array.
Any suggestions?
Split the string up into an array and use that instead:
str="firsturl.com/123416 secondurl.com/634214"
array=( $str )
echo "Number of elements: ${#array[#]}"
for item in "${array[#]}"
do
echo "$item"
done
You should never have a space separated list of strings though. If you're getting them line by line from some other command, you can use a while read loop:
while IFS='' read -r url
do
array+=( "$url" )
done
For properly encoded URLs, this probably won't make much of a difference, but in general, this will prevent glob expansion and some whitespace issues, and it's the canonical format that other commands (like wget -i) works with.
You should use something like this
declare -a a=( $str )
n=${#a[*]} # number of elements
Several ways:
$ str="firsturl.com/123416 secondurl.com/634214"
bash array:
$ while read -a ary; do echo ${#ary[#]}; done <<< "$str"
2
awk:
$ awk '{print NF}' <<< "$str"
2
*nix utlity:
$ printf "%s\n" $(printf "$str" | wc -w)
2
bash without array:
$ set -- $str
$ echo ${##}
2
If you create a function that will echo $* then that should provide the number of items to split.
count_params () { echo $#; }
Then passing $str to this function will give you the result
str="firsturl.com/123416 secondurl.com/634214"
count_params $str
Related
i searched ours but can't find a solution to extract all Strings between two characters to array using Bash.
I find
sed -n 's/.*\[\(.*\)\].*/\1/p'
But this only show me the last entry.
My String looks like:
var="[a1] [b1] [123] [Text text] [0x0]"
I want a Array like this:
arr[0]="a1"
arr[1]="b1"
arr[2]="123"
arr[3]="Text text"
arr[4]="0x0"
So i search for Stings between [ and ] and load it into an Array without [ and ].
Thank you for helping!
There's no simple way to do it. I would use a loop to extract them one at a time:
var="[a1] [b1] [123] [Text text] [0x0]"
regex='\[([^]]*)\](.*)'
while [[ $var =~ $regex ]]; do
arr+=("${BASH_REMATCH[1]}")
var=${BASH_REMATCH[2]}
done
In the regular expression, \[([^]]*)\] captures everything after the first [ up to (but not including) the next ]. (.*) captures everything after that for the next iteration.
You can use declare -n in bash 4.3 or later to make this look a little less intimidating.
declare -n m1=BASH_REMATCH[1] m2=BASH_REMATCH[2]
regex='\[([^]]*)\](.*)'
var="[a1] [b1] [123] [Text text] [0x0]"
while [[ $var =~ $regex ]]; do
arr+=("$m1")
var=$m2
done
$ IFS=, arr=($(sed 's/\] \[/","/g;s/\]/"/;s/\[/"/' <<< "$var")); echo "${arr[3]}"
"Text text"
There are a lot of suggestions that may work for you here already, but may not depending on your data. For example, substituting your current field separator of ] [ for a comma works unless you have commas embedded in your fields. Which your sample data does not have, but one never knows. :)
An ideal solution would be to use something as a field separator that is guaranteed never to be part of your field, like a null. But that's hard to do in a portable way (i.e. without knowing what tools are available). So a less extreme stance might be to use a newline as a separator:
var="[a1] [b1] [123] [Text text] [0x0]"
mapfile -t arr < <(sed $'s/^\[//;s/] \[/\\\n/g;s/]$//' <<<"$var")
declare -p arr
which would result in:
declare -a arr='([0]="a1" [1]="b1" [2]="123" [3]="Text text" [4]="0x0")'
This is functionally equivalent to the awk solution that Inian provided. Note that mapfile requires bash version 4 or above.
That said, you could also this exclusively within bash, without relying on any external tools like sed:
arr=( $var )
last=0
for i in "${!arr[#]}"; do
if [[ ${arr[$i]} != \[* ]]; then
arr[$last]="${arr[$last]} ${arr[$i]}"
unset arr[$i]
continue
fi
last=$i
done
for i in "${!arr[#]}"; do
arr[$i]="${arr[$i]:1:$((${#arr[$i]}-2))}"
done
At this point, declare -p arr results in:
declare -a arr='([0]="a1" [1]="b1" [2]="123" [3]="Text text" [5]="0x0")'
This sucks your $var into the array $arr[] with fields separated by whitespace, then it collapses the fields based on whether they begin with a square bracket. It then goes through the fields and replaces them with the substring that eliminates the first and last character. It may be a little less resilient and harder to read, but it's all within bash. :)
With GNU awk for multi-char RS and RT and newer versions of bash for mapfile:
$ mapfile -t arr < <(echo "$var" | awk -v RS='[^][]+' 'NR%2{print RT}')
$ declare -p arr
declare -a arr=([0]="a1" [1]="b1" [2]="123" [3]="Text text" [4]="0x0")
The goal: produce a path from an integer.
I need to split strings in fixed length (2 characters in this case), and then glue the pieces with a separator. Example : 123456 => 12/34/56, 12345 => 12/34/5.
I found a solution with sed:
sed 's/\(..\)/\1\//g'
but I'm not sure it's really quick, since I'm really not searching for any analysis of the string content (which will always be an integer, if it's any importance), but really to split it in length 2 (or 1 if the original length is odd).
bash expansion can do substring
var=123456
echo "${var:0:2}" # 2 first char
echo "${var:2:2}" # next two
echo "${var:4:2}" # etc.
joinning manually with /
echo "${var:0:2}/${var:2:2}/${var:4:2}"
Use parameter substitution. ${var:position:length} extracts substrings, ${#var} returns length of the value, ${var%final} removes "final" from the end of the value. Run in in a loop for strings of unknown length:
#!/bin/bash
for s in 123456 1234567 ; do
o=""
for (( pos=0 ; pos<${#s} ; pos+=2 )) ; do
o+=${s:pos:2}/
done
o=${o%/}
echo "$o"
done
TL;DR
sed is enough fast.
If we are talking about speed, let's check.
I think sed is the shorted solution, but as example I'll take #choroba's shell script:
$ wc -l hugefile
10877493 hugefile
Sed:
sed 's/\(..\)/\1\//g' hugefile
Output:
real 0m25.432s
user 0m8.731s
sys 0m10.123s
Script:
#!/bin/bash
while IFS='' read -r s ; do
o=""
for (( pos=0 ; pos<${#s} ; pos+=2 )) ; do
o+=${s:pos:2}/
done
o=${o%/}
echo "$o"
done < hugefile
Working really long time, I've interrupted it at:
real 1m19.480s
user 1m14.795s
sys 0m4.683s
So on my PC Intel(R) Core(TM) i5-7500 CPU # 3.40GHz, MemTotal: 16324532 kB, sed making around 426568 (close for half a million) string modifications per second. Seems like fast enough
You can split a string into elements using the fold command, read the elements into an array with readarray and process substitution, and then insert the field separator using IFS:
$ var=123456
$ readarray -t arr < <(fold -w2 <<< "$var")
$ (IFS=/; echo "${arr[*]}")
12/34/56
I put the last command in a subshell so the change to IFS is not persistent.
Notice that the [*] syntax is required here, or IFS won't be used as the output separator, i.e., the usually preferred [#] wouldn't work.
readarray and its synonym mapfile require Bash 4.0 or newer.
This works with an odd number of elements as well:
$ var=12345
$ readarray -t arr < <(fold -w2 <<< "$var")
$ (IFS=/; echo "${arr[*]}")
12/34/5
So I have this function with the following output:
AGsg4SKKs74s62#
I need to find a way to scramble the characters without deleting anything..aka all characters must be present after I scramble them.
I can only bash utilities including awk and sed.
echo 'AGsg4SKKs74s62#' | sed 's/./&\n/g' | shuf | tr -d "\n"
Output (e.g.):
S7s64#2gKAGsKs4
Here's a pure Bash function that does the job:
scramble() {
# $1: string to scramble
# return in variable scramble_ret
local a=$1 i
scramble_ret=
while((${#a})); do
((i=RANDOM%${#a}))
scramble_ret+=${a:i:1}
a=${a::i}${a:i+1}
done
}
See if it works:
$ scramble 'AGsg4SKKs74s62#'
$ echo "$scramble_ret"
G4s6s#2As74SgKK
Looks all right.
I know that you haven't mentioned Perl but it could be done like this:
perl -MList::Util=shuffle -F'' -lane 'print shuffle #F' <<<"AGsg4SKKs74s62#"
-a enables auto-split mode and -F'' sets the field separator to an empty string, so each character goes into a separate array element. The array is shuffled using the function provided by the core module List::Util.
Here is my solution, usage: shuffleString "any-string". Performance is not in my consideration when using bash.
function shuffleString() {
local line="$1"
for i in $(seq 1 ${#line}); do
local p=$(expr $RANDOM % ${#line})
if [[ $p -lt $i ]]; then
local line="${line:0:$p}${line:$i:1}${line:$p+1:$i-$p-1}${line:$p:1}${line:$i+1}"
elif [[ $p -gt $i ]]; then
local line="${line:0:$i}${line:$p:1}${line:$i+1:$p-$i-1}${line:$i:1}${line:$p+1}"
fi
done
echo "$line"
}
I have this variable:
A="Some variable has value abc.123"
I need to extract this value i.e abc.123. Is this possible in bash?
Simplest is
echo "$A" | awk '{print $NF}'
Edit: explanation of how this works...
awk breaks the input into different fields, using whitespace as the separator by default. Hardcoding 5 in place of NF prints out the 5th field in the input:
echo "$A" | awk '{print $5}'
NF is a built-in awk variable that gives the total number of fields in the current record. The following returns the number 5 because there are 5 fields in the string "Some variable has value abc.123":
echo "$A" | awk '{print NF}'
Combining $ with NF outputs the last field in the string, no matter how many fields your string contains.
Yes; this:
A="Some variable has value abc.123"
echo "${A##* }"
will print this:
abc.123
(The ${parameter##word} notation is explained in §3.5.3 "Shell Parameter Expansion" of the Bash Reference Manual.)
Some examples using parameter expansion
A="Some variable has value abc.123"
echo "${A##* }"
abc.123
Longest match on " " space
echo "${A% *}"
Some variable has value
Longest match on . dot
echo "${A%.*}"
Some variable has value abc
Shortest match on " " space
echo "${A%% *}"
some
Read more Shell-Parameter-Expansion
The documentation is a bit painful to read, so I've summarised it in a simpler way.
Note that the '*' needs to swap places with the ' ' depending on whether you use # or %. (The * is just a wildcard, so you may need to take off your "regex hat" while reading.)
${A% *} - remove shortest trailing * (strip the last word)
${A%% *} - remove longest trailing * (strip the last words)
${A#* } - remove shortest leading * (strip the first word)
${A##* } - remove longest leading * (strip the first words)
Of course a "word" here may contain any character that isn't a literal space.
You might commonly use this syntax to trim filenames:
${A##*/} removes all containing folders, if any, from the start of the path, e.g.
/usr/bin/git -> git
/usr/bin/ -> (empty string)
${A%/*} removes the last file/folder/trailing slash, if any, from the end:
/usr/bin/git -> /usr/bin
/usr/bin/ -> /usr/bin
${A%.*} removes the last extension, if any (just be wary of things like my.path/noext):
archive.tar.gz -> archive.tar
How do you know where the value begins? If it's always the 5th and 6th words, you could use e.g.:
B=$(echo "$A" | cut -d ' ' -f 5-)
This uses the cut command to slice out part of the line, using a simple space as the word delimiter.
As pointed out by Zedfoxus here. A very clean method that works on all Unix-based systems. Besides, you don't need to know the exact position of the substring.
A="Some variable has value abc.123"
echo "$A" | rev | cut -d ' ' -f 1 | rev
# abc.123
More ways to do this:
(Run each of these commands in your terminal to test this live.)
For all answers below, start by typing this in your terminal:
A="Some variable has value abc.123"
The array example (#3 below) is a really useful pattern, and depending on what you are trying to do, sometimes the best.
1. with awk, as the main answer shows
echo "$A" | awk '{print $NF}'
2. with grep:
echo "$A" | grep -o '[^ ]*$'
the -o says to only retain the matching portion of the string
the [^ ] part says "don't match spaces"; ie: "not the space char"
the * means: "match 0 or more instances of the preceding match pattern (which is [^ ]), and the $ means "match the end of the line." So, this matches the last word after the last space through to the end of the line; ie: abc.123 in this case.
3. via regular bash "indexed" arrays and array indexing
Convert A to an array, with elements being separated by the default IFS (Internal Field Separator) char, which is space:
Option 1 (will "break in mysterious ways", as #tripleee put it in a comment here, if the string stored in the A variable contains certain special shell characters, so Option 2 below is recommended instead!):
# Capture space-separated words as separate elements in array A_array
A_array=($A)
Option 2 [RECOMMENDED!]. Use the read command, as I explain in my answer here, and as is recommended by the bash shellcheck static code analyzer tool for shell scripts, in ShellCheck rule SC2206, here.
# Capture space-separated words as separate elements in array A_array, using
# a "herestring".
# See my answer here: https://stackoverflow.com/a/71575442/4561887
IFS=" " read -r -d '' -a A_array <<< "$A"
Then, print only the last elment in the array:
# Print only the last element via bash array right-hand-side indexing syntax
echo "${A_array[-1]}" # last element only
Output:
abc.123
Going further:
What makes this pattern so useful too is that it allows you to easily do the opposite too!: obtain all words except the last one, like this:
array_len="${#A_array[#]}"
array_len_minus_one=$((array_len - 1))
echo "${A_array[#]:0:$array_len_minus_one}"
Output:
Some variable has value
For more on the ${array[#]:start:length} array slicing syntax above, see my answer here: Unix & Linux: Bash: slice of positional parameters, and for more info. on the bash "Arithmetic Expansion" syntax, see here:
https://www.gnu.org/savannah-checkouts/gnu/bash/manual/bash.html#Arithmetic-Expansion
https://www.gnu.org/savannah-checkouts/gnu/bash/manual/bash.html#Shell-Arithmetic
You can use a Bash regex:
A="Some variable has value abc.123"
[[ $A =~ [[:blank:]]([^[:blank:]]+)$ ]] && echo "${BASH_REMATCH[1]}" || echo "no match"
Prints:
abc.123
That works with any [:blank:] delimiter in the current local (Usually [ \t]). If you want to be more specific:
A="Some variable has value abc.123"
pat='[ ]([^ ]+)$'
[[ $A =~ $pat ]] && echo "${BASH_REMATCH[1]}" || echo "no match"
echo "Some variable has value abc.123"| perl -nE'say $1 if /(\S+)$/'
I have a string in a Bash shell script that I want to split into an array of characters, not based on a delimiter but just one character per array index. How can I do this? Ideally it would not use any external programs. Let me rephrase that. My goal is portability, so things like sed that are likely to be on any POSIX compatible system are fine.
Try
echo "abcdefg" | fold -w1
Edit: Added a more elegant solution suggested in comments.
echo "abcdefg" | grep -o .
You can access each letter individually already without an array conversion:
$ foo="bar"
$ echo ${foo:0:1}
b
$ echo ${foo:1:1}
a
$ echo ${foo:2:1}
r
If that's not enough, you could use something like this:
$ bar=($(echo $foo|sed 's/\(.\)/\1 /g'))
$ echo ${bar[1]}
a
If you can't even use sed or something like that, you can use the first technique above combined with a while loop using the original string's length (${#foo}) to build the array.
Warning: the code below does not work if the string contains whitespace. I think Vaughn Cato's answer has a better chance at surviving with special chars.
thing=($(i=0; while [ $i -lt ${#foo} ] ; do echo ${foo:$i:1} ; i=$((i+1)) ; done))
As an alternative to iterating over 0 .. ${#string}-1 with a for/while loop, there are two other ways I can think of to do this with only bash: using =~ and using printf. (There's a third possibility using eval and a {..} sequence expression, but this lacks clarity.)
With the correct environment and NLS enabled in bash these will work with non-ASCII as hoped, removing potential sources of failure with older system tools such as sed, if that's a concern. These will work from bash-3.0 (released 2005).
Using =~ and regular expressions, converting a string to an array in a single expression:
string="wonkabars"
[[ "$string" =~ ${string//?/(.)} ]] # splits into array
printf "%s\n" "${BASH_REMATCH[#]:1}" # loop free: reuse fmtstr
declare -a arr=( "${BASH_REMATCH[#]:1}" ) # copy array for later
The way this works is to perform an expansion of string which substitutes each single character for (.), then match this generated regular expression with grouping to capture each individual character into BASH_REMATCH[]. Index 0 is set to the entire string, since that special array is read-only you cannot remove it, note the :1 when the array is expanded to skip over index 0, if needed.
Some quick testing for non-trivial strings (>64 chars) shows this method is substantially faster than one using bash string and array operations.
The above will work with strings containing newlines, =~ supports POSIX ERE where . matches anything except NUL by default, i.e. the regex is compiled without REG_NEWLINE. (The behaviour of POSIX text processing utilities is allowed to be different by default in this respect, and usually is.)
Second option, using printf:
string="wonkabars"
ii=0
while printf "%s%n" "${string:ii++:1}" xx; do
((xx)) && printf "\n" || break
done
This loop increments index ii to print one character at a time, and breaks out when there are no characters left. This would be even simpler if the bash printf returned the number of character printed (as in C) rather than an error status, instead the number of characters printed is captured in xx using %n. (This works at least back as far as bash-2.05b.)
With bash-3.1 and printf -v var you have slightly more flexibility, and can avoid falling off the end of the string should you be doing something other than printing the characters, e.g. to create an array:
declare -a arr
ii=0
while printf -v cc "%s%n" "${string:(ii++):1}" xx; do
((xx)) && arr+=("$cc") || break
done
If your string is stored in variable x, this produces an array y with the individual characters:
i=0
while [ $i -lt ${#x} ]; do y[$i]=${x:$i:1}; i=$((i+1));done
The most simple, complete and elegant solution:
$ read -a ARRAY <<< $(echo "abcdefg" | sed 's/./& /g')
and test
$ echo ${ARRAY[0]}
a
$ echo ${ARRAY[1]}
b
Explanation: read -a reads the stdin as an array and assigns it to the variable ARRAY treating spaces as delimiter for each array item.
The evaluation of echoing the string to sed just add needed spaces between each character.
We are using Here String (<<<) to feed the stdin of the read command.
I have found that the following works the best:
array=( `echo string | grep -o . ` )
(note the backticks)
then if you do: echo ${array[#]} ,
you get: s t r i n g
or: echo ${array[2]} ,
you get: r
Pure Bash solution with no loop:
#!/usr/bin/env bash
str='The quick brown fox jumps over a lazy dog.'
# Need extglob for the replacement pattern
shopt -s extglob
# Split string characters into array (skip first record)
# Character 037 is the octal representation of ASCII Record Separator
# so it can capture all other characters in the string, including spaces.
IFS= mapfile -s1 -t -d $'\37' array <<<"${str//?()/$'\37'}"
# Strip out captured trailing newline of here-string in last record
array[-1]="${array[-1]%?}"
# Debug print array
declare -p array
string=hello123
for i in $(seq 0 ${#string})
do array[$i]=${string:$i:1}
done
echo "zero element of array is [${array[0]}]"
echo "entire array is [${array[#]}]"
The zero element of array is [h]. The entire array is [h e l l o 1 2 3 ].
Yet another on :), the stated question simply says 'Split string into character array' and don't say much about the state of the receiving array, and don't say much about special chars like and control chars.
My assumption is that if I want to split a string into an array of chars I want the receiving array containing just that string and no left over from previous runs, yet preserve any special chars.
For instance the proposed solution family like
for (( i=0 ; i < ${#x} ; i++ )); do y[i]=${x:i:1}; done
Have left overs in the target array.
$ y=(1 2 3 4 5 6 7 8)
$ x=abc
$ for (( i=0 ; i < ${#x} ; i++ )); do y[i]=${x:i:1}; done
$ printf '%s ' "${y[#]}"
a b c 4 5 6 7 8
Beside writing the long line each time we want to split a problem, so why not hide all this into a function we can keep is a package source file, with a API like
s2a "Long string" ArrayName
I got this one that seems to do the job.
$ s2a()
> { [ "$2" ] && typeset -n __=$2 && unset $2;
> [ "$1" ] && __+=("${1:0:1}") && s2a "${1:1}"
> }
$ a=(1 2 3 4 5 6 7 8 9 0) ; printf '%s ' "${a[#]}"
1 2 3 4 5 6 7 8 9 0
$ s2a "Split It" a ; printf '%s ' "${a[#]}"
S p l i t I t
If the text can contain spaces:
eval a=( $(echo "this is a test" | sed "s/\(.\)/'\1' /g") )
$ echo hello | awk NF=NF FS=
h e l l o
Or
$ echo hello | awk '$0=RT' RS=[[:alnum:]]
h
e
l
l
o
I know this is a "bash" question, but please let me show you the perfect solution in zsh, a shell very popular these days:
string='this is a string'
string_array=(${(s::)string}) #Parameter expansion. And that's it!
print ${(t)string_array} -> type array
print $#string_array -> 16 items
This is an old post/thread but with a new feature of bash v5.2+ using the shell option patsub_replacement and the =~ operator for regex. More or less same with #mr.spuratic post/answer.
str='There can be only one, the Highlander.'
regexp="${str//?/(&)}"
[[ "$str" =~ $regexp ]] &&
printf '%s\n' "${BASH_REMATCH[#]:1}"
Or by just: (which includes the whole string at index 0)
declare -p BASH_REMATCH
If that is not desired, one can remove the value of the first index (index 0), with
unset -v 'BASH_REMATCH[0]'
instead of using printf or echo to print the value of the array BASH_REMATCH
One can check/see the value of the variable "$regexp" with either
declare -p regexp
Output
declare -- regexp="(T)(h)(e)(r)(e)( )(c)(a)(n)( )(b)(e)( )(o)(n)(l)(y)( )(o)(n)(e)(,)( )(t)(h)(e)( )(H)(i)(g)(h)(l)(a)(n)(d)(e)(r)(.)"
or
echo "$regexp"
Using it in a script, one might want to test if the shopt is enabled or not, although the manual says it is on/enabled by default.
Something like.
if ! shopt -q patsub_replacement; then
shopt -s patsub_replacement
fi
But yeah, check the bash version too! If you're not sure which version of bash is in use.
if ! ((BASH_VERSINFO[0] >= 5 && BASH_VERSINFO[1] >= 2)); then
printf 'No dice! bash version 5.2+ is required!\n' >&2
exit 1
fi
Space can be excluded from regexp variable, change it from
regexp="${str//?/(&)}"
To
regexp="${str//[! ]/(&)}"
and the output is:
declare -- regexp="(T)(h)(e)(r)(e) (c)(a)(n) (b)(e) (o)(n)(l)(y) (o)(n)(e) (t)(h)(e) (H)(i)(g)(h)(l)(a)(n)(d)(e)(r)(.)"
Maybe not as efficient as the other post/answer but it is still a solution/option.
If you want to store this in an array, you can do this:
string=foo
unset chars
declare -a chars
while read -N 1
do
chars[${#chars[#]}]="$REPLY"
done <<<"$string"x
unset chars[$((${#chars[#]} - 1))]
unset chars[$((${#chars[#]} - 1))]
echo "Array: ${chars[#]}"
Array: f o o
echo "Array length: ${#chars[#]}"
Array length: 3
The final x is necessary to handle the fact that a newline is appended after $string if it doesn't contain one.
If you want to use NUL-separated characters, you can try this:
echo -n "$string" | while read -N 1
do
printf %s "$REPLY"
printf '\0'
done
AWK is quite convenient:
a='123'; echo $a | awk 'BEGIN{FS="";OFS=" "} {print $1,$2,$3}'
where FS and OFS is delimiter for read-in and print-out
For those who landed here searching how to do this in fish:
We can use the builtin string command (since v2.3.0) for string manipulation.
↪ string split '' abc
a
b
c
The output is a list, so array operations will work.
↪ for c in (string split '' abc)
echo char is $c
end
char is a
char is b
char is c
Here's a more complex example iterating over the string with an index.
↪ set --local chars (string split '' abc)
for i in (seq (count $chars))
echo $i: $chars[$i]
end
1: a
2: b
3: c
zsh solution: To put the scalar string variable into arr, which will be an array:
arr=(${(ps::)string})
If you also need support for strings with newlines, you can do:
str2arr(){ local string="$1"; mapfile -d $'\0' Chars < <(for i in $(seq 0 $((${#string}-1))); do printf '%s\u0000' "${string:$i:1}"; done); printf '%s' "(${Chars[*]#Q})" ;}
string=$(printf '%b' "apa\nbepa")
declare -a MyString=$(str2arr "$string")
declare -p MyString
# prints declare -a MyString=([0]="a" [1]="p" [2]="a" [3]=$'\n' [4]="b" [5]="e" [6]="p" [7]="a")
As a response to Alexandro de Oliveira, I think the following is more elegant or at least more intuitive:
while read -r -n1 c ; do arr+=("$c") ; done <<<"hejsan"
declare -r some_string='abcdefghijklmnopqrstuvwxyz'
declare -a some_array
declare -i idx
for ((idx = 0; idx < ${#some_string}; ++idx)); do
some_array+=("${some_string:idx:1}")
done
for idx in "${!some_array[#]}"; do
echo "$((idx)): ${some_array[idx]}"
done
Pure bash, no loop.
Another solution, similar to/adapted from Léa Gris' solution, but using read -a instead of readarray/mapfile :
#!/usr/bin/env bash
str='azerty'
# Need extglob for the replacement pattern
shopt -s extglob
# Split string characters into array
# ${str//?()/$'\x1F'} replace each character "c" with "^_c".
# ^_ (Control-_, 0x1f) is Unit Separator (US), you can choose another
# character.
IFS=$'\x1F' read -ra array <<< "${str//?()/$'\x1F'}"
# now, array[0] contains an empty string and the rest of array (starting
# from index 1) contains the original string characters :
declare -p array
# Or, if you prefer to keep the array "clean", you can delete
# the first element and pack the array :
unset array[0]
array=("${array[#]}")
declare -p array
However, I prefer the shorter (and easier to understand for me), where we remove the initial 0x1f before assigning the array :
#!/usr/bin/env bash
str='azerty'
shopt -s extglob
tmp="${str//?()/$'\x1F'}" # same as code above
tmp=${tmp#$'\x1F'} # remove initial 0x1f
IFS=$'\x1F' read -ra array <<< "$tmp" # assign array
declare -p array # verification