I have a project in Zend, in directory: /var/www/Project/public
A content of file httpd.conf is:
<VirtualHost 127.0.0.1:80>
DocumentRoot "/var/www/Project/public"
ServerName project.localhost
# This should be omitted in the production environment
SetEnv APPLICATION_ENV development
<Directory "/var/www/Project/public">
Options Indexes MultiViews FollowSymLinks
AllowOverride All
Order allow,deny
Allow from all
</Directory>
</VirtualHost>
and /etc/hosts:
127.0.0.1 localhost
127.0.1.1 michal-centrala
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
127.0.0.1 project.localhost
When I go to page http://project.localhost i get the following error:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error.
More information about this error may be available in the server error log.
The server log is following:
[Sun Jun 23 01:31:56 2013] [alert] [client 127.0.0.1] /var/www/Project/public/.htaccess: Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Where's the problem?
Enable mod_rewrite in httpd.conf
Most likely line
LoadModule rewrite_module libexec/apache2/mod_rewrite.so
is commented out
#LoadModule rewrite_module libexec/apache2/mod_rewrite.so
Related
Before all, yes I have checked other posts like this, this or even this among others.
This being said, let me expose my case:
It works on the dev-env (localhost) completely fine (of course, it doesn't require any proxy)
I also use this curl command to confirm:
curl 'http://localhost:9021/ws' \
--http1.1 \
-H 'Pragma: no-cache' \
-H 'Sec-WebSocket-Key: W/ZEACBv+gi6xA1JeMaO/A==' \
-H 'Upgrade: websocket' \
-H 'Cache-Control: no-cache' \
-H 'Connection: Upgrade' \
-H 'Sec-WebSocket-Version: 13'
and it connects ok.
When I run it on the remote dev server, I have this Apache config:
<IfModule mod_ssl.c>
<VirtualHost *:443>
ServerName dev.remote.com
LogLevel warn
ErrorLog "| /usr/bin/rotatelogs -l /home/user/log/dev.remote.com/error.%Y-%m-%d 86400"
CustomLog "| /usr/bin/rotatelogs -l /home/user/log/dev.remote.com/access.%Y-%m-%d 86400" combined
ServerSignature Off
DocumentRoot /home/user/www/dev.remote.com
<Directory /home/user/www/dev.remote.com>
Options -Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
<Location />
Options FollowSymLinks
</Location>
#
# Serve static files directly with Apache
#
ProxyPass /public !
Alias /public /home/user/www/dev.remote.com/public
<Directory /home/user/www/dev.remote.com/public>
Options -Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
ProxyPass /assets !
Alias /assets /home/user/www/dev.remote.com/.next/static/assets
<Directory /home/user/www/dev.remote.com/.next/static/assets>
Options -Indexes +FollowSymLinks +MultiViews
AllowOverride All
Require all granted
</Directory>
#
# Serve the rest with NodeJS/express
#
RewriteEngine On
LogLevel alert rewrite:trace6
RewriteCond %{HTTP:Connection} upgrade [NC]
RewriteRule /ws ws://localhost:9021/ws [P]
ProxyPreserveHost On
ProxyRequests off
# WebSocket server (express) is on port 9021
ProxyPass /ws ws://localhost:9021/ws
ProxyPassReverse /ws ws://localhost:9021/ws
# HTTP server (express) is on port 9020
ProxyPass / http://localhost:9020/
ProxyPassReverse / http://localhost:9020/
<Proxy *>
Require all granted
</Proxy>
SSLCertificateFile /etc/letsencrypt/live/dev.remote.com/fullchain.pem
SSLCertificateKeyFile /etc/letsencrypt/live/dev.remote.com/privkey.pem
Include /etc/letsencrypt/options-ssl-apache.conf
</VirtualHost>
</IfModule>
So 2 points here:
1.
I'm sure the WebSocket server is working on the remote server by testing via ssh with the previous curl command. And it connects.
2.
When I try opening the connection from the browser
ws = new WebSocket('wss://dev.remote.com/ws');
the mod_rewrite rule seems ok because the trace is like this:
[Fri May 28 17:37:16.272448 2021] [rewrite:trace2] [pid 15772] mod_rewrite.c(477): [client a.b.c.d:63015] a.b.c.d - - [dev.remote.com/sid#6916462d1a20][rid#69164d3530a0/initial] init rewrite engine with requested uri /ws
[Fri May 28 17:37:16.272475 2021] [rewrite:trace3] [pid 15772] mod_rewrite.c(477): [client a.b.c.d:63015] a.b.c.d - - [dev.remote.com/sid#6916462d1a20][rid#69164d3530a0/initial] applying pattern '/ws' to uri '/ws'
[Fri May 28 17:37:16.272505 2021] [rewrite:trace4] [pid 15772] mod_rewrite.c(477): [client a.b.c.d:63015] a.b.c.d - - [dev.remote.com/sid#6916462d1a20][rid#69164d3530a0/initial] RewriteCond: input='Upgrade' pattern='upgrade' [NC] => matched
[Fri May 28 17:37:16.272513 2021] [rewrite:trace2] [pid 15772] mod_rewrite.c(477): [client a.b.c.d:63015] a.b.c.d - - [dev.remote.com/sid#6916462d1a20][rid#69164d3530a0/initial] rewrite '/ws' -> 'ws://localhost:9021/ws'
[Fri May 28 17:37:16.272521 2021] [rewrite:trace2] [pid 15772] mod_rewrite.c(477): [client a.b.c.d:63015] a.b.c.d - - [dev.remote.com/sid#6916462d1a20][rid#69164d3530a0/initial] forcing proxy-throughput with ws://localhost:9021/ws
[Fri May 28 17:37:16.272529 2021] [rewrite:trace1] [pid 15772] mod_rewrite.c(477): [client a.b.c.d:63015] a.b.c.d - - [dev.remote.com/sid#6916462d1a20][rid#69164d3530a0/initial] go-ahead with proxy request proxy:ws://localhost:9021/ws [OK]
So I deduct the rules are working and it's actually making the request via proxy to :ws://localhost:9021/ws
But... there's no connection received in the WebSocket server.
Therefore, I get this on Chrome:
WebSocket connection to 'wss://dev.remote.com/ws' failed
The key was to have proxy_wstunnel mod active >_<
In case it helps anyone...
cd /etc/apache2/mods-enabled
sudo ln -s ../mods-available/proxy_wstunnel.load
stupid error, but I was too focused on the configuration, and it was about enabled mods
i keep getting this error after running the command
# sudo apache2ctl configtest
[Wed Mar 18 15:19:09.134018 2020] [core:error] [pid 10656:tid 140336746033216] (EAI 2)Name or service not known: AH00547: Could not resolve host name www.toutic.com: -- ignoring!
AH00526: Syntax error on line 1 of /etc/apache2/sites-enabled/toutic.com.conf:
Missing address for VirtualHost
Action 'configtest' failed.
The Apache error log may have more information.
here is the /etc/apache2/sites-enabled/toutic.com.conf file :
<VirtualHost *: 80>
ServerAdmin admin#toutic.com
ServerName toutic.com
ServerAlias www.toutic.com
DocumentRoot /var/www/toutic.com/public_html
ErrorLog ${APACHE_LOG_DIR
}/error.log
CustomLog ${APACHE_LOG_DIR
}/access.log combined
</VirtualHost>
here are the steps i followed : https://www.digitalocean.com/community/tutorials/how-to-install-the-apache-web-server-on-debian-9
Remove everything and try like this:
<VirtualHost *:80>
ServerName toutic.com
ServerAlias www.toutic.com
DocumentRoot /var/www/toutic.com/public_html
ErrorLog ${APACHE_LOG_DIR}/error.log
CustomLog ${APACHE_LOG_DIR}/access.log combined
</VirtualHost>
i have some problems to setup my mod_rewrite for my Joomla-Site.
Im using Apache 2.2.22 on Debian.
Website is on Directory: /home/web/beta/
What i did:
1) Commands:
sudo a2enmod rewrite
sudo mkdir -p /var/run/apache2
sudo chown -R www-data /var/run/apache2
sudo a2enmod actions
sudo /etc/init.d/apache2 force-reload
2) Then i setup following file: /etc/apache2/sites-enabled/000-default
<Directory /home/web/>
Options Indexes FollowSymLinks MultiViews
AllowOverride FileInfo
3) The htaccess file at path /home/web/beta/.htaccess i set:
RewriteEngine On
(I took the .htaccess from this site: http://www.joomla-security.de/downloads.html)
Ok, now the Problem.
As long as i set the AllowOverride to FileInfo i get following error message:
Internal Server Error
The server encountered an internal error or misconfiguration and was
unable to complete your request.
Please contact the server administrator, webmaster#localhost and
inform them of the time the error occurred, and anything you might
have done that may have caused the error.
More information about this error may be available in the server error
log. Apache/2.2.22 (Debian) Server at XXXXXXX.com Port 80
What i did wrong?
Can you help me please?
EDIT: Error Log:
[Wed Nov 11 19:21:56 2015] [notice] caught SIGTERM, shutting down
[Wed Nov 11 19:21:57 2015] [notice] Apache/2.2.22 (Debian) PHP/5.4.45-0+deb7u2 configured -- resuming normal operations
[Wed Nov 11 19:21:57 2015] [alert] [client XX.XX.XX.198] /home/web/beta/.htaccess: Options not allowed here
[Wed Nov 11 19:21:58 2015] [alert] [client XX.XX.XX.198] /home/web/beta/.htaccess: Options not allowed here
[Wed Nov 11 19:21:59 2015] [alert] [client XX.XX.XX.144] /home/web/beta/.htaccess: Options not allowed here
It seems, from the errors you've posted, that you are trying to use the Options directive in .htaccess. To do that, you need to add Options to the AllowOverride directive in 000-default (cf. https://httpd.apache.org/docs/2.2/mod/core.html#options).
So change:
AllowOverride FileInfo
to
AllowOverride FileInfo Options
in 000-default.
Edit:
And if the above doesn't work, try changing it to:
AllowOverride All
And if that doesn't work then it could mean that other configuration files are getting loaded after 000-default and overwrite some of the directives.
I have some issues with setting an clustered environment for weblogic and Apache. The structure is like this: 1 webserver that proxies requests to a clustered environment of 3 weblogic servers.
Everytime i send the request to the apache server , the request gets unhandled. I figured out a part of the problem , but that is something that is not intended in production. whenever i add DynamicServerList On the requests fail. When i switch it to off it works, but that means whenever a server fails , apache will still send requests to that server and user experience would be 0.
EDIT 1: I am using weblogic 12c and apache2.4 for Centos 7
EDIT 2: There is no firewall nor selinux active
Here is my config file for weblogic plugin:
<VirtualHost *:8080>
ServerAdmin postmaster#webserver2
ServerName webserver2
DocumentRoot /var/www/webserver2/htdocs
ErrorLog /var/log/httpd//webserver-error_log
CustomLog /var/log/httpd/webserver-access_log forwarded
<Directory />
AllowOverride all
Order allow,deny
Allow from all
</Directory>
DirectoryIndex index.html
<Location />
SetHandler weblogic-handler
</Location>
<IfModule mod_weblogic.c>
WeblogicCluster 192.168.166.70:8001,192.168.166.71:8001,192.168.166.69:8001
ConnectTimeoutSecs 15
ConnectRetrySecs 10
WLIOTimeoutSecs 600
DynamicServerList ON
Idempotent ON
FileCaching ON
KeepAliveSecs 60
KeepAliveEnabled ON
DebugConfigInfo ON
</IfModule>
</VirtualHost>
And the errors I get are the following:
[Mon Sep 14 09:54:58.480616 2015] [weblogic:error] [pid 15343:tid
140547949991680] [client 172.18.132.50:57991] <1534314422136982>
parseJVMID: could not resolve hostname '-1062689209'. Returning NULL
from parseJVMID
[Mon Sep 14 09:54:58.480681 2015] [weblogic:error]
[pid 15343:tid 140547949991680] [client 172.18.132.50:57991]
<1534314422136982> initJVMID: parseClusterServerList failure
[Mon Sep
14 09:55:28.481215 2015] [weblogic:error] [pid 15343:tid
140547949991680] [client 172.18.132.50:57991] <1534314422136982>
request [/clusterjsp/HaJsp.jsp] did NOT process
successfully..................
I am using WampServer and I would like to debug my rewrite rules from .htaccess, since I still receive 404 errors.
I already enabled rewrite_module, log_debug_module, log_forensic_module and log_config_module, but in my error log I don't receive any information about .htaccess.
In httpd.conf I changed LogLevelto: LogLevel warn mod_rewrite.c:trace8. I also tried the following options: rewrite_module, mod_rewrite.so, rewrite, mod_rewrite.
Then when I restart the server I only get this log, but I don't receive anything about web requests when I try to go to localhost/mysite.
[Sat Oct 12 17:33:07.063441 2013] [mpm_winnt:notice] [pid 8884:tid 412] AH00422: Parent: Received shutdown signal -- Shutting down the server.
[Sat Oct 12 17:33:09.063556 2013] [mpm_winnt:notice] [pid 1632:tid 288] AH00364: Child: All worker threads have exited.
[Sat Oct 12 17:33:09.078557 2013] [mpm_winnt:notice] [pid 8884:tid 412] AH00430: Parent: Child process 1632 exited successfully.
[Sat Oct 12 17:33:48.859832 2013] [mpm_winnt:notice] [pid 8252:tid 412] AH00455: Apache/2.4.4 (Win64) PHP/5.4.12 configured -- resuming normal operations
[Sat Oct 12 17:33:48.859832 2013] [mpm_winnt:notice] [pid 8252:tid 412] AH00456: Server built: Feb 22 2013 22:08:37
[Sat Oct 12 17:33:48.859832 2013] [core:notice] [pid 8252:tid 412] AH00094: Command line: 'c:\\wamp\\bin\\apache\\apache2.4.4\\bin\\httpd.exe -d C:/wamp/bin/apache/Apache2.4.4'
[Sat Oct 12 17:33:48.867833 2013] [mpm_winnt:notice] [pid 8252:tid 412] AH00418: Parent: Created child process 6216
[Sat Oct 12 17:33:49.145848 2013] [mpm_winnt:notice] [pid 6216:tid 288] AH00354: Child: Starting 150 worker threads.
UPDATE
Here is some more information about my folder structure. I have put my DirectoryRoot to D:/www and my .htaccess file is in D:/www/mysite.
Some parts from httpd.conf:
<Directory />
AllowOverride none
Require all granted
</Directory>
DocumentRoot "D:/www"
<Directory "D:/wamp/www">
Options Indexes FollowSymLinks
AllowOverride All
# Require all granted
# onlineoffline tag - don't remove
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
</Directory>
#ErrorLog "logs/error.log"
ErrorLog "c:/wamp/logs/apache_error.log"
#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn rewrite:trace3
Disabling the rewritemodule gives errors on RewriteEngine so I suppose that it does find my .htaccess file.
This is my .htaccess file:
RewriteEngine On
RewriteCond %{REQUEST_FILENAME} !-d
RewriteCond %{REQUEST_FILENAME} !-f
RewriteRule ^(.*?)/?$ index.php/$1
Could it be that you are using Apache 2.4.x, if so they have made major changes in the area of logging.
Try
LogLevel alert rewrite:trace3
Also another change is that logged info gets written to the normal error_log file.
Documentation
ADDED After Additional Info added
You have some fairly obvious errors in your httpd.conf file.
Can I suggest you review this document on the WAMPServer forum Wampserver 2.4 What to do after Installing
I just changed my WAMPServer Apache conf as so:
LogLevel warn rewrite:trace8
And got lots of extra lines in my apache_error.log from the rewrite module.
Make sure you are actually running something on the server that will exercise mod_rewrite and the RewriteRule you have in your .htaccess
ERRORS:
#WRONG Allows access to the root of your D: drive and all subfolders, great for hackers
<Directory />
AllowOverride none
Require all granted
</Directory>
#CORRECTED
<Directory />
AllowOverride none
Require all denied
</Directory>
.
#WRONG
DocumentRoot "D:/www"
#CORRECTED
DocumentRoot "d:/wamp/www"
.
#WRONG
<Directory "D:/wamp/www">
Options Indexes FollowSymLinks
AllowOverride All
# Require all granted
# onlineoffline tag - don't remove
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
Allow from ::1
Allow from localhost
</Directory>
#CORRECTED
<Directory "D:/wamp/www">
Options Indexes FollowSymLinks
AllowOverride All
# onlineoffline tag - don't remove
Require local
</Directory>
After editting yor 'httpd.conf' log to
LogLevel alert rewrite:trace3
You should restart apache server to apply changes.