I want to write a piece of assembly code that generates sounds with different frequencies with access to external speakers (not the internal PC speaker). Can I do such a thing using assembly 8086? If so, where can I get the port number of my external speakers (let's say the built-in laptop speakers)?
Thank you very much in advance
Related
I am trying to accelerate the communication between two FPGA/ARM development boards. Currently, data is passed from RocketCore to the ARM processor to an Ethernet port. This transfer is incredibly slow. Instead, I am trying to connect the RocketCore directly to the development board's peripherals. All documentation I read indicates the only way to get data out of a RocketCore is via MMIO. First is it possible to directly control an FPGA pin via a RocketCore? Second if yes, what command, library etc. would I use?
Functions as simple as would suffice
writePin(pin number, value)
readPin(pin number)
Thank you in advance!
I have tried sending data via the ARM core; however, that is too slow for my application.
I am a college undergrad studying computer engineering and trying to send signals using USB to an FPGA from a windows computer connected to the FPGA using usb. What commands can i use to output/input data from my computer?
For background:
I am working on a windows 10 laptop. I am using python currently to run a program that gets the data from the user. The data is literally just a set of binary bits (up to about 75 bits), our project is to do with encoding, so our fpga is supposed to take the data then encode it using block codes, then send the data back, then the data is to be slightly corrupted, sent back to the FPGA, then error checked and decoded and sent to the computer again. The FPGA we have is a Cyclone 5 (Model Number: 5csema5f31c6).
I have recently started taking an OS class and since the OS controls how hardware is used by programs, i assume my programs will need to issue certain commands to the OS which will then tell the USB to do what we want.
The answer depends on what specific driver you are using to talk to your device. If your device is just a generic USB device and doesn't fit into an existing category (like a keyboard or printer), then I'd recommend using the driver named WinUSB.
You would need to write (and sign) an INF file or use a technology called Microsoft OS 2.0 Descriptors to tell Windows that you want your device to use WinUSB.
After you've done that, you can use a Microsoft-provided DLL called winusb.dll which helps you send the commands that the WinUSB driver expects. You'd also need to use SetupAPI to find your device in the first place. Using those two Microsoft APIs directly can be difficult and it makes your code non-portable, so you might consider using a USB abstraction library like libusb or libusbp instead.
I'm trying to create an interactive voice-tree for an art project. Think of something like a choose-you-own-adventure, but on the phone and with voice commands. I already have a fair amount of experience working with Construct 2 (game-making software), and can easily build a branching, voice controlled interaction loadable through a modern browser with it. For reasons relevant to the overall story, I need players to connect to the interaction through a Google Voice number they will call.
I already have a GV number and have written an AutoHotKey script to auto-answer the Hangouts call, but I'm stuck trying to route the audio from the caller in Hangouts to the browser AND the audio response output of the browser back to the caller.
I know of an extremely primitive way to accomplish this, [which I've illustrated with this diagram:
Unfortunately, this is rather cumbersome and I suspect I can achieve my goal through virtualization or at the VERY least some sort of attenuation cables between two physical machines (I tried running a generic AUX cable between two laptops, but couldn't get speaker audio to go into microphone audio from one to the other).
I've been experimenting on Parallels running Windows 8.1 with Virtual Audio Cable(no luck), JACK(too robust), Chevolume(too limited), and IndieVolume(too limited).
I suspect VAC would be the best bet, but I can't seem to find a way to route Firefox audio output to a microphone input which directs to Chrome and vice versa. If I try accomplishing it all through just one virtual machine I have to use two different browsers for the voice-tree webpage and Hangouts call since Hangouts pushes its audio through Chrome (even the stand-alone application).
Is there any way to route microphone input and speaker output separately between two virtual machines? If not, could I still try and accomplish this with a specific type of cables between two laptops running windows 7/8 that have generic audio jacks?
So I have my computer linked up via bluetooth to two different devices, and I'd like to relay the input from one device to the other device automatically.
I figure I can do this with a script, but I'm pretty green with scripting languages, and I'm not even sure if this is possible.
I know that like Linux, OSX treats serial ports as if they were file directories, so I figure this can't be too hard. I just have no idea where to start.
Can someone point me in the right direction?
I would use a simple python script. Manipulating serial ports is simple with the pyserial module. Then create thread for each port that reads from one port and writes to the other.
I am writing a windows application (written entirely in C++) which reads files from a storage card on a mobile phone running Windows Mobile. The tough part is, I don't know how to make my application detect the event that a user has connected the mobile phone to the USB of laptop. I did some reading on MSDN and have written a small code using RegisterDeviceNotification, which detects whenever a USB disk is attached/removed from the laptop. However, I am unable to tweak this to make it work for phone type devices. Please help me out through any links/tutroials which explains this(preferrably C++, as I don't know .NET or C#).
Thanks
Alok
According to this article you can use RegisterDeviceNotification to get notifications when activesync detects a device has been plugged/unplugged. (See option 3 at the end of the article)
It may just be a matter of setting up the correct notification filter.
Windows Mobile devices use RNDIS, a network interface protocol behind the scenes. Hence, the RegisterDeviceNotification method still works, but you're looking for a DEV_BROADCAST_DEVICEINTERFACE, not DEV_BROADCAST_VOLUME. (i.e. dbch_devicetype==DBT_DEVTYP_DEVICEINTERFACE)
You can use RAPI or RAPI2 to detect when a Windows Mobile device connects to a PC via Active Sync or Windows Mobile Device Center. RAPI can also be used to read the files on the storage card and much more.
RAPI is simpler to program because it is a C based API. RAPI2 has more functionality than RAPI, but is an object oriented COM API. If your needs are simple and you only care about one device/connection at a time then RAPI is good enough. There are two RAPI functions used to detect connections: CeRapiInit (blocking), and CeRapiInitEx (signals an event upon connection).