How can I save the state of a repeat control? - xpages

I have a repeat control generated based on a view.
I'd like to save the state of the repeat control when a user navigates to a document and returns.
I have tried the pager Save State control from ExtLib but that doesn't work.
Please advice!

I dont know if the xe:pagerSaveState should work with the repeat control. I always use the xe:pagerSaveState in combination with a View/DataView/ForumView. But when useing a reapeat i do something like this to get my state back:
When opening the 'EditYourDocument.xsp' XPage write the first element of the xp:repeat control to a scope like:
sessionScope.put('first',getComponent("repeat1").first);
context.redirectToPage("editDocument.xsp");
and add this code to your repteat:
first="#{javascript:return (sessionScope.first != null)?sessionScope.first:0;}">
when comming back to your view from any other site your view should display to the right page and data.

Related

How to destroy a component on navigation

I need to destroy a component on navigating away from it but I cannot figure out how to do it. I've tried clearHistory: true in RouterExtensions, but it doesn't work. The flow of our program is this:
Dashboard > link to Component1
Component1 > Save takes the user back to Dashboard.
If the user clicks the link to go back to Component1, I get an ExpressionChangedAfterItHasBeenCheckedError because the memory of the component is still resident.
It is bit tricky to remove a page from the navigation history in nativescrupt angular. I would suggest you to create a modal page for Component1, save it and when user close the modal, take it back to Dashboard.
or you need to handle the change detection manually, for further reading, you can refer here.
I solved my immediate problem by redesigning the page to use calculated values based on the data rather than ui state settings from the ngrx store which, as I thought about it, is a more stable solution.
I left the question up because I was curious if there was a way to remove pages from the navigation history.

Have to push button twice to get partial refresh to work

Background: Xpage with multiple data sources. Each row of tabbed table contains an edit panel bound to a different data source than the main page. Each page contains a table to enter new documents. These documents are children of the main document. There is a view control that shows the user created documents immediately. The button in the table saves the document in addition to adding some control fields. It does a partial refresh of the editPanel.
Recently I added validation to the fields in the entry table. I use a function, and prevent updating from anything but the button. I am using Tommy Valand's method from this blog post: http://dontpanic82.blogspot.com/2010/03/xpages-making-validation-behave.html. If I don't use Tommy's method, then the validators fire when switching tabs, and are useless.
All of this works sort of, but I am experiencing the following issues.
1) I have to push the button twice to get the partial refresh to fire. Not only that, but the validation messages to not fire until the button is pushed twice. The first part was still an issue prior to adding the validation.
2) The table values do not clear after the refresh does happen. This used to work prior to adding the validation. The only way to get the values to clear now, is to do a full refresh (F5).
I really just need partial refresh to behave like it should. Any help is greatly appreciated.
I am answering my own question because I think that I might have found out why the partial refresh was acting so flaky. Here is what I did that solved my issues: Each tab had an editPanel. If I make the edit panel do a partial refresh to itself then the buttons on that panel seems to behave as you would expect them to.
When I create a new core control panel, the default in No submission. I do not know whether this issue manifests itself only when using multiple data sources and/or tabbed tables. Hopefully this fix will be of use to someone down the road. It is worth a try if you are having issues with partial refresh working correctly.

Dynamic Content Control in Extlib flips out after rebuild

I have an issue with the dynamic content control in ExtLib. Every time I compile my xpage the dynamic content control flips out if I do not reload the page. I need a way to control this, like an onerror event on the control.
this is wahat's happening
I open my webpage, the dynamic content control works fine
I do some changes to my xpages and build (webpage still open)
I click a link on my webpage to reload the content in the dynamic content control.
the webpage flips out and starts to reload constantly using a partial refresh url.
I use various ways to update this control. sometimes it is through a csjs link and somtimes it is per interval using XSP.partialRefreshGet() so I guess I need a way to know if the dynamic content control is available before calling it, or let the control notify me somehow that is is not available
any idea?
Thanks
Thomas
When you change an XPage you must do a manual full reload of that page in any browser. Executing any call from the stale page will not work.

The buttons in a repeat don't hide/show after refreshing the panel the repeat is in?

I have a repeat that has buttons embedded in it. The repeat is in a panel. When the user clicks a button the button should hide/show (I partial refresh the panel). The repeat is tied to a Domino view and I see the other values that I from that view get updated in the repeat, so, it does not seem like a view index issue (I refresh the view index in my code.)
If I use context.reloadPage() in my button onclick code then the buttons will hide/show like they should, but, that seems like I am using a sledge hammer! Any suggestions on how to get the buttons to recompute the visible property when the panel that holds the repeat is rendered? Another strange thing is that the visible property gets computed three times whenever I refresh the panel that holds the repeat.
thanks, Howard
I think your looking for
getComponent("<id>").setRendered(true / false);
Hi For Repeat control's entry is used to make our head hard. Because handling the entry by SSJS, we can get the value and set the value. But rendering part, id of the repeating component are same for all. So if we try to give reder as false. It hides all of our repeating component.
Try to use the following., [Put this in button onclick, and see the value of below]
var entryValue= getComponent("repeat1").getChildren().get(0).getValue()
getComponent("inputText1").setValue(entryValue)
But in client side we can easily handle. Because the id of the DOM object is unique for all repeating component.
var id1="view:_id1:repeat2:"+'2'+":button1"
document.getElementById(id1).style.display="none"
This will hide the third entry of your repeat control component.
Please see the post, You may get better idea
Found a solution. My original solution was getting values from the repeat rows (using the collection object, which was a viewentrycollection and using getColumnValues) to compute the rendered property for the buttons.
Instead, I created a viewScope variable (a Vector) that holds the state of the buttons (which set of buttons to show). This gets populated in the beforePageLoad event of the page.
The button onclick code updates this viewScope variable after performing its processing. All works very nice now. I guess it was something in the JSF lifecycle that kept the buttons from being properly updated. Using the viewScope variable works fine.
With addition to what Ramkumar said, you can use the index variable in the repeat control to identify each and every occurrences inside the repeat control. You will get more idea, if you inspect with element from firefox[You might need firebug]. Usually the field mentioned inside a repeat control itself can be considered as an array

Automatically open document when only one document is listed in repeat control

I have a repeat control for a domino view which displays the results from a search field.
As you type more characters into the search field the number of items in the list is reduced. If/When the the list only contains a single item I would like to open item automatically, without having to click the link.
Any ideas are appreciated.
Edit: after some very interesting responses, here are some screenshots
I have 3 elements on the page, a searchbar, a repeat control and a form:
When I start typing in the search bar, the repeat is refreshed with every keystroke:
the list is reduced, typing the next character ...
again the list is reduced, only 2 left, typing again....
Only one left, now it would be time to open the document in the form ..... without clicking the link.
I've tried several events on the page, but it seems that I could not find the one that will allow me to "select" the document and display the data in the form.
It seems that it's not as simple as I thought
Since you want to open the link automatically I don't know if I would try to base it on the getRowCount() of the repeat itself. You don't want to even get that far right? you just want to go to the single document.
I would put a function in beforePageLoad event maybe. Not totally sure which event but I'd try that first. Use SSJS and do a lookup that would basically return a collection of what the repeat would show. If the collection count = 1 then get your destination from that entry and do your redirection from there.
That what I would try at least. Interesting scenario!
Now that I see the screenshots this might be easier then you think and I have already implemented something similar on an internal application that I have built. It does rely on the fact that each entry in the list is 100% unique.
First of all you will need to bind the search field to a scoped variable and the onchange/onkeypress event will need to perform a partial refresh of a panel that contains both the list and the document portion of the page.
For the list the link on each item should set the value of the same scoped variable used in the search box and clicking the link should be set to run a partial refresh of the document area.
For the document area you will need two panels, the first panel will only display if there is no matching document and the second panel will only display if there is a matching document, you can do this in the rendered section by writing some ssjs that grabs a handle to the db/view and does a dblookup and returns either true or false if the document exists depending on panel your dealing with.
With this setup, when somebody clicks a link or fills out the searchbox the scoped variable will contain a value, the document panels will then check to see if this is a unique value in the view in the db and update themselves to either display the 'no document' panel or the 'document' panel accordingly.
You could add a evaluation script to the entry of your repeat control which checks the size of your repeat control using the method getRowCount() from the component. If this is 1 you could execute a context.redirectToPage("yourpage.xsp?id=yourid",true) this forces the current page to send a redirect request back to the browser and therefore redirects you to the correct page.
All you need to know is which xpage you need to open and which parameters you should use. But these could be retrieved from the content you are iterating over.

Resources