I was following "rTorrent on Windows" tutorial, and i think i installed all requested packages for rTorrent, though i am not 100% sure.
Problem starts with installing and configuring libsigc++
./configure
user#computer ~
$ cd /usr/local/src/libsigc++-2.2.10
user#computer /usr/local/src/libsigc++-2.2.10
$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking how to create a ustar tar archive... gnutar
checking whether to enable maintainer-specific portions of Makefiles... no
checking whether make supports GNU make features... yes
checking for g++... no
checking for c++... no
checking for gpp... no
checking for aCC... no
checking for CC... no
checking for cxx... no
checking for cc++... no
checking for cl.exe... no
checking for FCC... no
checking for KCC... no
checking for RCC... no
checking for xlC_r... no
checking for xlC... no
checking whether the C++ compiler works... no
configure: error: in `/usr/local/src/libsigc++-2.2.10':
configure: error: C++ compiler cannot create executables
See `config.log' for more details
config.log: http://pastebin.com/G1Xn30iL
Did i miss any package or something else?
I am hoping for help. This is my first time with cygwin and rtorrent... obviously i need to figure things out before going further :O
You're missing a C compiler in your cygwin environment. Run the cygwin setup again and choose to install g++, and you should see progress.
Related
I've tried to build some packages from source code. I've been solving many error so far but I reach one point where I can't find any solution even after spending hours of searching online. I think the problem is the line "checking for set-gcc... no" but what is "set-gcc". I've tried "apt install set-gcc" but it is not the package name.
build#shell:~/posixlib$ ./configure --prefix=$HOME/app set CPPFLAGS="-I$HOME/posixlib/lib" set LDFLAGS="$HOME/posixlib/lib/libgnu.a"
configure: WARNING: you should use --build, --host, --target
configure: WARNING: you should use --build, --host, --target
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking for set-gcc... no
checking for gcc... gcc
checking whether the C compiler works... no
configure: error: in /home/build/posixlib': configure: error: C compiler cannot create executables See config.log' for more details
I had install MSVC2017,zlib,msys2.
Run configure in msys2 and have some error:
./configure CC="cl -nologo" CXX="$PWD/compile cl -nologo" CXXFLAGS=-EHsc AR=lib
configure: loading site script /etc/config.site
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
checking whether make supports nested variables... no
checking whether UID '1492654' is supported by ustar format... yes
checking whether GID '1049089' is supported by ustar format... yes
checking how to create a ustar tar archive... pax
checking for style of include used by make... none
checking for gcc... cl -nologo
checking whether the C compiler works... no
configure: error: in /d/xapian_proj/xapian-core-1.4.10':
configure: error: C compiler cannot create executables
Seeconfig.log' for more details
Thanks
Im trying to build pulseaudio-11.1 because firefox asks for it to play audio on video.
Im using knoppix 8.1, 64 bit installation, but it runs in 32bits.
When I configure the pulseaudio source, I get a message stating that intltool is too old. Despite having met their version requirement at 0.35.0. I installed from source version 0.51.0 and 0.50.2 but neither installation satisfied the demand. I get the same message at the end when I run bootstrap.sh
root#kami:/Downloads/pulseaudio-11.1# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... //bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether UID '0' is supported by ustar format... yes
checking whether GID '0' is supported by ustar format... yes
checking how to create a ustar tar archive... gnutar
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for stow... no
checking whether make supports nested variables... (cached) yes
checking whether ln -s works... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking whether gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking whether g++ supports C++11 features by default... yes
checking how to run the C preprocessor... gcc -E
checking for grep that handles long lines and -e... //bin/grep
checking for egrep... //bin/grep -E
checking whether gcc needs -traditional... no
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether it is safe to define __EXTENSIONS__... yes
checking for gm4... no
checking for m4... m4
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking whether NLS is requested... yes
Unescaped left brace in regex is illegal here in regex; marked by <-- HERE in m/^(.*)\${ <-- HERE ?([A-Z_]+)}?(.*)$/ at /usr/local/bin/intltool-update line 1064.
checking for intltool >= 0.35.0... found
configure: error: Your intltool is too old. You need intltool 0.35.0 or later.
This was before and after I removed version 0.35.0 of intltool that was pre-installed and then installed the newer versions, 0.51.0, then 0.50.2 to try a slightly older version if there was something wrong with the newest release, which is ironically quite old dating back to 2015.
Also bizarrly to top it off as you can see in the output before stating that the version is too old that it had found exactly what it is saying it does not have.
So in conclusion pulseaudio asks for intltool >= 0.35.0 which it finds and says right afterwards that it has not, which remained true across 3 seperate instances that satisfied their request on version 0.35.0, 0.51.0 and 0.50.2
Any help is appreciated.
At installation 'NetworkManager-l2tp-master' i stumbled upon an error:
configure: error: Your intltool is too old. You need intltool 0.35 or later.
I used intermediate commands:
./configure
sudo apt update
sudo apt install intltool imagemagick libmagickcore-dev pstoedit libpstoedit-dev
git clone https://github.com/autotrace/autotrace.git
cd autotrace
#unnecessary command for clarification should bugs be introduced later
git rev-parse HEAD
#t86c9c80c4h669302cb2571c0cab0rer7a102731
./autogen.sh
cd .. # necessarily exit from 'autotrace' directory
autoreconf -i
./configure # again
after that, the error is resolved and indicates to:
configure: error: Package requirements (gtk+-3.0 >= 3.4) were not met:
No package 'gtk+-3.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables GTK_CFLAGS
and GTK_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
This alert indicates that possible it is not installed pkg-config (corresponding version of Linux).
I am trying to build GCC on Alpine Linux. I do not have root access or sudo enabled user. I am following GCC Wiki. I got this output.
~/objdir $ $PWD/../gcc-5.2.0/configure --prefix=$HOME/gcc-5.2.0 --enable-languages=c,c++,fortran,go
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking target system type... x86_64-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln works... yes
checking whether ln -s works... yes
checking for a sed that does not truncate output... /bin/sed
checking for gawk... no
checking for mawk... no
checking for nawk... no
checking for awk... awk
checking for libatomic support... yes
checking for libcilkrts support... yes
checking for libitm support... yes
checking for libsanitizer support... yes
checking for libvtv support... yes
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in `/home/asgeek/objdir':
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
I have searched through the internet for couple of days but couldn't find proper solution. Please help me to solve this.
Thanks in advance!
I had the same error while installing python in alpine, I fixed it with this:
apk --update add gcc make g++ zlib-dev
But what I want is to create a script to build GCC for non-root
environment
Well, then create a user (May be you already did), and install {gcc, g++, etc. build requirements} with apk , and do the build in /home/[name]/gcc-build/ with
1) ../gcc-5.4.0/configure --prefix=/home/[name]/gcc54 --program-suffix=54 --enable-languages=c,c++ --disable-multilib
2) make
GCC version 5 or lower is suggested. Note : If e.g. gcc-4.9.x, the configuring command, etc. is different.
I want to build MinGW-w64 where:
A: I want to compile MinGW itself on Linux (64-bit).
B: I want the MinGW tools (compiler, etc) to run on Linux (64-bit).
C: I want the MinGW tools (compiler, etc) to produce code that runs on Windows 64-bit (Win7 & Win8).
I'm having trouble at the configure stage. I've googled around a bit but I can't find out what options I need to pass to configure.
I have downloaded the source for MinGW-w64 SVN from (https://svn.code.sf.net/p/mingw-w64/code/trunk/).
(AFAICT this is the current official repo).
The source has a text help (mingw-w64-doc/howto-build/mingw-w64-howto-build.txt). However, this is primarily intended for those wanting to run MinGW tools on Windows.
The example options (for a non-multilib w64 target) are: --host=x86_64-w64-mingw32 --target=x86_64-w64-mingw32 --disable-multilib
But I think I want the host option to refer to linux (right?). I've tried --host=x86_64-linux-gnuand --host=x86_64-pc-linux-gnu but no luck.
I get the error:
configure: error: Please check if the mingw-w64 header set and the build/host option are set properly.
configure: error: ../../../svn/mingw-w64-v6615-2014-05-07/mingw-w64-crt/configure failed for mingw-w64-crt
The full log is
checking whether to enable maintainer-specific portions of Makefiles... no
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/make/tool/MinGW/svn/mingw-w64-v6615-2014-05-07/build-aux/missing: Unknown `--is-lightweight' option
Try `/make/tool/MinGW/svn/mingw-w64-v6615-2014-05-07/build-aux/missing --help' for more information
configure: WARNING: 'missing' script is too old or missing
checking for x86_64-linux-gnu-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking whether to build the headers... yes
checking whether to build the crt... yes
checking whether to build the optional libraries... no
checking whether to build the optional tools... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating config.h
config.status: config.h is unchanged
=== configuring in mingw-w64-headers (/make/tool/MinGW/build/v6615-2014-05-07/mingw-w64-headers)
configure: running /bin/bash ../../../svn/mingw-w64-v6615-2014-05-07/mingw-w64-headers/configure --disable-option-checking '--prefix=/make/tool/MinGW/use/v6615/x86_64-w64-mingw32' '--target=x86_64-w64-mingw32' '--host=x86_64-linux-gnu' '--disable-multilib' '--with-sysroot=/make/tool/MinGW/use/v6615/x86_64-w64-mingw32' 'host_alias=x86_64-linux-gnu' 'target_alias=x86_64-w64-mingw32' --cache-file=/dev/null --srcdir=../../../svn/mingw-w64-v6615-2014-05-07/mingw-w64-headers
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
/make/tool/MinGW/svn/mingw-w64-v6615-2014-05-07/mingw-w64-headers/build-aux/missing: Unknown `--is-lightweight' option
Try `/make/tool/MinGW/svn/mingw-w64-v6615-2014-05-07/mingw-w64-headers/build-aux/missing --help' for more information
configure: WARNING: 'missing' script is too old or missing
checking for x86_64-linux-gnu-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking whether to rebuild headers with widl... no
checking whether to build a w32api package for Cygwin... no
checking for c-runtime headers... yes
checking for optional sdk headers... ddk,directx
checking if installing idl files is enabled... no
checking whether to enable the secure API... no
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating Makefile
config.status: creating crt/_mingw.h
config.status: creating config.h
config.status: config.h is unchanged
=== configuring in mingw-w64-crt (/make/tool/MinGW/build/v6615-2014-05-07/mingw-w64-crt)
configure: running /bin/bash ../../../svn/mingw-w64-v6615-2014-05-07/mingw-w64-crt/configure --disable-option-checking '--prefix=/make/tool/MinGW/use/v6615/x86_64-w64-mingw32' '--target=x86_64-w64-mingw32' '--host=x86_64-linux-gnu' '--disable-multilib' '--with-sysroot=/make/tool/MinGW/use/v6615/x86_64-w64-mingw32' 'host_alias=x86_64-linux-gnu' 'target_alias=x86_64-w64-mingw32' --cache-file=/dev/null --srcdir=../../../svn/mingw-w64-v6615-2014-05-07/mingw-w64-crt
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for x86_64-linux-gnu-strip... no
checking for strip... strip
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-pc-linux-gnu
checking for sysroot... /make/tool/MinGW/use/v6615/x86_64-w64-mingw32
checking for a sed that does not truncate output... /bin/sed
checking for gawk... (cached) gawk
checking for x86_64-linux-gnu-gcc... x86_64-linux-gnu-gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether x86_64-linux-gnu-gcc accepts -g... yes
checking for x86_64-linux-gnu-gcc option to accept ISO C89... none needed
checking whether x86_64-linux-gnu-gcc understands -c and -o together... yes
checking for style of include used by make... GNU
checking dependency style of x86_64-linux-gnu-gcc... gcc3
checking for x86_64-linux-gnu-g++... x86_64-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether x86_64-linux-gnu-g++ accepts -g... yes
checking dependency style of x86_64-linux-gnu-g++... gcc3
checking how to run the C preprocessor... x86_64-linux-gnu-gcc -E
checking for x86_64-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for x86_64-linux-gnu-dlltool... no
checking for dlltool... no
checking for x86_64-linux-gnu-ar... no
checking for x86_64-linux-gnu-lib... no
checking for x86_64-linux-gnu-link... no
checking for ar... ar
checking the archiver (ar) interface... ar
checking dependency style of x86_64-linux-gnu-gcc... gcc3
checking for x86_64-linux-gnu-as... no
checking for as... as
checking whether to build a w32api package for Cygwin... no
checking whether to build the Win32 libraries... no
checking whether to build the Win64 libraries... yes
checking whether to build the WinCE libraries... no
checking whether to enable globbing... no
checking whether to enable private exports... no
checking whether to enable delay import libs... no
checking whether to enable experimental features... no
checking whether the compiler supports -municode... no
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking _mingw_mac.h usability... no
checking _mingw_mac.h presence... no
checking for _mingw_mac.h... no
configure: error: Please check if the mingw-w64 header set and the build/host option are set properly.
configure: error: ../../../svn/mingw-w64-v6615-2014-05-07/mingw-w64-crt/configure failed for mingw-w64-crt
NOTE: I can successfully compile native GCC & Clang from source.
Purpose:
My ultimate goal is to use the latest Clang to produce C++14 code for Windows 7/8 64-bit (including D3D11 & OpenGL).
I want to build trunk MinGW because the latest Clang produces assembly code that the default MinGW cannot assemble (mainly "junk at end of line" errors).
As of 2014-05-07 (today), only Clang offers full C++14 support, and I am making use of features only available in Clang (eg: variable templates).
Yet, Clang relies on GCC / MinGW for assembling and linking.
Info:
OS: Linux Mint 16 64-bit (XFCE).
Thanks for all assistance.
Old question, but an answer might be helpful to those coming from google.
The host and build flags are a bit misleading. The info from the help page at mingw-w64-crt/configure --help shows:
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
So we want to leave --build alone, and specify the windows system we wish to cross-compile for with --host.
So, the way to build for 64bit windows, and include both 32bit and 64bit libraries and std::experimental features is with:
./configure --enable-lib32 --enable-lib64 --enable-experimental --host=x86_64-w64-mingw32
It's very similar if you want to build for 32bit windows, but of course you can't enable 64bit mode:
./configure --enable-lib32 --enable-experimental --host=i686-w64-mingw32
https://github.com/Zeranoe/mingw-w64-build
I think your answer is here:
./mingw-w64-build x86_64 for 64bit;
or
./mingw-w64-build x86_64 i686 for 32bit.
I met the same error while configuring. After reading the shell in mingw-w64-build this file, I think you will have to execute:
./configure in folder ../x86_64-w64-v8.0.0/mingw-w64-headers,
then
./configure in folder ../x86_64-w64-v8.0.0/mingw-w64-crt,
and finally
./configure in folder ../x86_64-w64-v8.0.0/mingw-w64-libraries/winpthreads.
I did not verify the whole process manually, because this shell file just did the job.
Maybe you could try this - its the latest version of mingw and you dont have to compile it by yourself:
https://github.com/Zeranoe/mingw-w64-build
it supports almost all distros...