I have an app that runs fine in debug but crashes when trying to launch in release. This is the exception that is thrown.
Unhandled exception at 0x5D2F7717 (Windows.UI.Xaml.dll) in Napkin.exe:
0xC000027B: An application-internal exception has occurred
(parameters: 0x034F6C70, 0x00000001).
Any ideas what might be the source of this problem? Thanks.
Here is more of the output window
Unhandled exception at 0x55257717 (Windows.UI.Xaml.dll) in Napkin.exe:
0xC000027B: An application-internal exception has occurred
(parameters: 0x02D029E0, 0x00000001). Unhandled exception at
0x750D2722 (combase.dll) in Napkin.exe: 0xC0000602: A fail fast
exception occurred. Exception handlers will not be invoked and the
process will be terminated immediately.
STATUS_STACK_BUFFER_OVERRUN encountered Napkin.exe has triggered a
breakpoint. The thread 0x1b20 has exited with code -1073740791
(0xc0000409). The thread 0xb50 has exited with code -1073740791
(0xc0000409). The thread 0x108c has exited with code -1073740791
(0xc0000409). The thread 0x16cc has exited with code -1073740791
(0xc0000409). The thread 0x222c has exited with code -1073740791
(0xc0000409). The thread 0x78c has exited with code -1073740791
(0xc0000409). The thread 0x14a4 has exited with code -1073740791
(0xc0000409). The thread 0x2164 has exited with code -1073740791
(0xc0000409). The program '[6392] Napkin.exe' has exited with code
-1073740791 (0xc0000409). Activation of the Windows Store app 'cdbbf746-1a99-4261-8bfa-9cb2934d4ac0_qddg1e943mmj2!App' failed with
error 'Windows was unable to communicate with the target application.
This usually indicates that the target application's process aborted.
More information may be available in the Debug pane of the Output
window (Debug->Windows->Output)'.
Possibly an uninitialized variable. Debug builds will initialize them for you, but Release builds will not.
Could also be an invalid pointer dereference; Debug builds usually treat memory differently than Release builds do.
Related
I just installed EclipseCDT 2022-12, created the HelloWorld example app, compiled, but when I debug I get an error. I have both current MSYS2 (MinGW64) and Cygwin64 installed, neither environment works and fails with the same error:
Error in final launch sequence:
Failed to execute MI command:
-exec-run
Error message from debugger back end:
Error creating process /cygdrive/c/Windows/system32/C:/Projects/cc3135/hello/C:/Projects/cc3135/hello/Debug/hello.exe, (error 2).
Failed to execute MI command:
-exec-run
Error message from debugger back end:
Error creating process /cygdrive/c/Windows/system32/C:/Projects/cc3135/hello/C:/Projects/cc3135/hello/Debug/hello.exe, (error 2).
Error creating process /cygdrive/c/Windows/system32/C:/Projects/cc3135/hello/C:/Projects/cc3135/hello/Debug/hello.exe, (error 2).
Any suggestions?
P.S. The hello executable runs fine in cmd.exe and under gdb.
I have ran the tool and it executes perfectly like how it is. At the end of migration I get the below message "Exiting with return code: 0".
Normally, I wouldnt bother. However, I am implementing the migration using Azure DevOps release pipelines.
With this message the deployment stage always fails.
Does someone has any idea about this error
The last few lines of execution
Migration Processor Complete TfsTeamSettingsProcessor
2021-04-23T07:12:23.4698310Z [07:12:23 INF] TfsTeamSettingsProcessor completed in 00:00:02.9601088
2021-04-23T07:12:23.4746613Z [07:12:23 INF] Application is shutting down...
2021-04-23T07:12:23.4787008Z [07:12:23 DBG] Hosting stopping
2021-04-23T07:12:23.4792590Z [07:12:23 DBG] Exiting with return code: 0
2021-04-23T07:12:23.4797995Z [07:12:23 INF] Terminating: Application forcebly closed.
2021-04-23T07:12:23.4802683Z [07:12:23 INF] Application Ending
It looks like robocopy exit codes 0-7 indicate success. I changed from command line execution to powershell command and added this to the bottom of your script:
if ($lastexitcode -lt 8) { $lastexitcode = 0 }
This works for me.
First of all, I tried to run eclipse (eclipse-jee-neon-3-linux-gtk-x86_64) normally. Each time, it showed a splash screen for few seconds and disappers. Then I check with terminal. Running in the terminal with command ./eclipse prints the error messages. I have attached the full terminal output below.
nalin#nalin:/opt/eclipse-neon$ ./eclipse
org.eclipse.m2e.logback.configuration: The org.eclipse.m2e.logback.configuration bundle was activated before the state location was initialized. Will retry after the state location is initialized.
(Eclipse:5741): GLib-CRITICAL **: g_base64_encode_step: assertion 'in != NULL' failed
Job found still running after platform shutdown. Jobs should be canceled by the plugin that scheduled them during shutdown: org.eclipse.epp.internal.mpc.ui.wizards.MarketplaceDropAdapter$1
Any idea what's going on ?
I have a Crossbar.io server with PHP Thruway workers. Recently, I started getting the following error. It happens about once a day now:
2016-04-17T21:08:12+0000 [Router 9572] Unable to format event {'log_logger': <Logger 'crossbar.router.protocol.WampWebSocketServerProtocol'>, 'log_time': 1460927292.17918, 'log_source': None, 'log_format': 'Traceback (most recent call last):\n File "/usr/local/lib/python2.7/site-packages/autobahn/wamp/websocket.py", line 88, in onMessage\n for msg in self._serializer.unserialize(payload, isBinary):\n File "/usr/local/lib/python2.7/site-packages/autobahn/wamp/serializer.py", line 106, in unserialize\n raise ProtocolError("invalid serialization of WAMP message ({0})".format(e))\nProtocolError: invalid serialization of WAMP message (Expected object or value)\n'}: tuple index out of range
2016-04-17T21:08:15+0000 [Guest 9583] The connected has closed with reason: close
2016-04-17T21:08:19+0000 [Guest 9583] PHP Fatal error: Call to a member function call() on null in /var/www/html/pickupServer/vendor/voryx/thruway/src/Thruway/ClientSession.php on line 106
2016-04-17T21:08:19+0000 [Guest 9583] Fatal error: Call to a member function call() on null in /var/www/html/pickupServer/vendor/voryx/thruway/src/Thruway/ClientSession.php on line 106
2016-04-17T21:08:19+0000 [Controller 9565] Guest worker2 exited with error A process has ended with a probable error condition: process ended with exit code 255.
Does anyone know hot to prevent this?
How do I automatically restart the worker if it fails as in this case?
I solved it in linux with MONIT checking crossbar-controler process and adding the following line:
if children < 3 then restart
3 is the number os child processes that crossbar-controler has on my environment. If any of them exits then crossbar restarts itself and notifies me. You have to check the number of child processes you have running using:
sudo service crossbar status.
This solves the error exit worker but with a cost of restarting the crossbar-controler. I am convinced that must be a crossbar/thruway way of solving the problem.
The ideal way is to try catch all possible errors of php to prevent fatal worker exits.
Thanks
I have a BitBake build process that runs on a Docker container (CentOS 7). The BitBake fails during recipe gcc-cross-i586-5.2.0-r0: task do_compile on each run that I try it in.
An example of bitbake's output:
NOTE: recipe gcc-cross-i586-5.2.0-r0: task do_compile: Started
ERROR: Worker process (367) exited unexpectedly (-9), shutting down...
ERROR: Worker process (367) exited unexpectedly (-9), shutting down...
ERROR: Worker process (367) exited unexpectedly (-9), shutting down...
ERROR: Worker process (367) exited unexpectedly (-9), shutting down...
NOTE: Tasks Summary: Attempted 1538 tasks of which 17 didn't need to be rerun and all succeeded.
Is this a problem with recipe gcc-cross-i586-5.2.0-r0: task do_compile? Perhaps an out-of-memory error? I don't know what the -9 refers to or how to find out more information about it.
Try:
$ bitbake -c cleansstate gcc-cross ; bitbake -k gcc-cross
How much you have memory of ram?
Report log error here.
This worked for me,
Edit conf/local.conf and decrease the number of working threads by adding the following to you conf/local.conf file (under the build directory):
BB_NUMBER_THREADS = "6"
Just a long shot, -9 in kernel land means EBADF (bad file number.) Is it possible you have done some operations as root and some files are not accessible during the build? Is the issue reproducible? ie. can you rm -rf tmp and does it happen again? Make sure you don't have any permissions issues in your project directory and associated file system(s).