I had previously installed screwturn on windows 7 iis and the site was functioning 100%
I have recently installed it on Win Server2008 and it would appear that the scripts are not working.
The website works tabs and logins ok. The problem is in the providers tab, if I click on any displays or on the 'select' label nothing happens. When I had installed this on the windows 7 iis these were clearly working.
All roles should be in place, ISS server, application server.
Do I need to enable anything specific on the server or am I missing a configuration?
SOLVED THE ISSUE"!!!!!#
just downgraded the framework from 4.0 to 2.0 and worked perfectly
I vaguely remember similar issues when running under .NET 4.0 (are you?) - do you have these fixes in your Web.config?
<pages validateRequest="false">
<httpRuntime requestValidationMode="2.0"/>
Related
I am using visual studio 2013. I am trying to run a web app on my browser and I get the following error.
I have searched this forum but is not working. I was running the same web app yesterday and it worked fine.Today it does not.
Thank you for your help
I too faced this problem when my Windows was upgraded.
Doing this fixed the issue on my computer. Also note that you have to select the Server node on the left side panel. (NOT a web site).
Follow the instructions in the screenshots and then
Uncheck the www server checkbox.
Restart the IIS and it worked on my machine!
I was also facing similar issue from last 2-3 days. I am using VS2013 professional for building MVC application. All of sudden, any web application created on VS2013 started giving this kind of error. I tried reinstalling IIS, VS2013; but it does not worked for me.
During event logs checks, I found this error message-
"FailedRequestTracing module detected invalid configuration on path 'MACHINE/WEBROOT/APPHOST'. Trace provider or tracing area name 'WWW Server' is not recognized. Check the section for currently supported list or providers and areas. No logs will be generated until this condition is corrected. The problem happened at least 1 times in the last 5 minutes. The data is the error."
In applicationhost.config file, I did found below tag-
<add provider="WWW Server" areas="Authentication,Security,Filter,StaticFile,CGI,Compression,Cache,RequestNotifications,Module,FastCGI,WebSocket,Rewrite,RequestRouting,iisnode" verbosity="Verbose" />
I removed this tag from applicationhost.config file located under C:\Users\\My Documents\IISExpress\config path on windows 7 machine.
Now my all application started running fine from VS2013 with IISexpress.
See if this helps.
Cheers
Sanket
Today I upgraded my windows 7 ultimate to windows 10 pro. Every thing seems to work fine. But the localhost is now throwing error : HTTP Error 503. The service is unavailable.
I checked IIS, it is running. I checked the version of IIS from IIS Manager, it is showing Version 10.0.10240.16384.
I test my sites on localhost.
Before upgrade, in windows 7 ultimate it was working fine. I also checked "Turn windows feature on or off" and found that IIS is installed properly.
Please guide me.
Thanks Joe Raio for providing the hint. I checked the event log and found that rewrite.dll was causing error. I uninstalled IIS URL rewrite extension and the problem is gone. Now everything is working as before, classic asp, php, everything.
Please try this solution
Go to the Application Pool ...
Advanced Settings ...
Process Model ...
Identity ...
Set it to "LocalSystem"
I've just got a new server setup on Windows 2008 Web edition. I'm trying to set the first asp.net 4 application up on it but am having nothing but problems.
The latest is that I'm getting the 404.17 error, which says "the requested content appears to be script and will not be served by the static file handler.".
I've done a lot of research on google but most suggestions seem to be to run aspnet_regiis -i to install asp.net 4. I've done this several times both on the Framework and Framework64 folders, but with no success.
I tried changing from the default application pool to a .net4 application pool, which appeared to work at first and I instead got a server error to do with permissions. I fixed that, and immediately the 404.17 error returned.
Other suggestions I've read say to go into the "turn windows features on and off" and make sure .net 4 is selected there under IIS. However on this server clicking "turn windows features on and off" takes me to the standard windows 2008 server manager. I click "add features" there, and only ".NET Framework 3.0 Features (Installed)" is listed and selected. .NET 4 isn't shown there, yet it is selectable through the application pools.
What else can I try to get the website running as I'm at a complete loss now. Its annoying because my old server was easy to manage - I did it all through the server itself without a control panel (Windows 2003), now on my new server I have to manage most of it through Plesk because there is no dns.
Any help would be much appreciated.
I too had the same problem but solved it with simple solution. My program was in framework 4.0 but in application pool was mapped to framework 2.0.
Just changed the frame work in application pool to 4.0.
It worked.
I've finally figured out the problem, and it was to do with Plesk itself.
After delving through some of the thousands of links throughout the plesk control panel I found a page for "Website Scripting and Security". Under there it was set to .NET 2.0. However, even though I'd installed .NET 4 on the server, Plesk didn't know about it. Although the application pool I'd set the website to run under through IIS was .NET 4, it still wouldn't work for some reason.
I then found another page under "tools and settings" for server components, and on that page is a refresh button. Hit that and it suddenly realised that .NET 4 was installed, went back to the website scripting and security page, selected .NET 4, and hey presto, I got a server error (never have I been so glad to see a server error).
I then just had to give the application pool identity read access to the web folder, and the website worked.
I wish I'd paid an extra £15 per month for Windows 2008 Standard edition now so I could manage it all manually without Plesk.
Ensure that you are running this application under a Virtual Directory, also ensure that your IIS has ASP, ASP.Net, ISAPI Extensions And Filters, Static Content installed.
Change the .net framework from 'plesk' panel:
go to Domains
select then domain
Go to 'Domain and Websites & Domains'
Hide Advanced Operations
Go to 'Asp.net Settings'
Go to 'Change Version'
select 4.0
If you don't have the 4.0 option then you must install the framework on your server first.
I have taken over an Umbraco (version 4.7.1) installation from a previous coworker. The server hosting the application must be shut down and therefore I'm migrating the application to a new server.
The old server is running IIS6, but the the new server is running IIS7.5. When I try to open the site on the new server, I get a "Object reference not set to an instance of an object" exception. The YSOD does not provide much info on what's going wrong (see below).
When I run the application locally in Visual Studio it works like a charm. Do any of you have a clue to what is going wrong?
Can I suggest that you take a clean web.config from the Umbraco 4.7.1 archive and try that first. You can download v4.7.1 from this unofficial archive http://code.leekelleher.com/umbraco/archive/
Merge your customisations into the web.config e.g. connection string and give that a go as I suspect your web.config is not migrated to IIS7.
I wrote a blog post a few years ago about migrating web.config files from IIS6 > IIS7 which may be of use if the above advice doesn't help:
http://www.prolificnotion.co.uk/use-appcmd-to-migrate-web-config-from-iis6-to-iis7/
Have you checked that your application pool is running the correct version of the .Net Framework? Also check the pipeline mode you are running - mine run in Integrated mode not Classic.
In the <system.webServer> node of your web.config locate the <modules> node and ensure you have the runAllManagedModulesForAllRequests attribute set to true as that has caught me out a few times. It should look something like this:
<modules runAllManagedModulesForAllRequests="true">
I suspect the latter advice is the one that will do it for you.
Simon
Just riffing on some of #Pronotion's suggestions ... I have occasionally had issues installing apps on new server instances and have had to reinstall IIS. It's a single command line: aspnet_regiis -i
Also from your screenshot, it looks like you are running a .Net 4 app pool. Umbraco 4.7.1 should be running under .Net 2 Classic app pool as far as I remember.
I am attempting to install an EPiServer R2 SP2 site on IIS 6.0 and I received the classfactory not initialised error. I managed to overcome this by downgrading my web.config to one that is compliant with IIS 6.0
The site loads fine and works as it should all except for edit/admin mode and the default login screen which all seem to have lost the styles and javascript. As a result they are unusable. Any ideas on what has gone wrong?
Gah! The error lay in not removing one of the name attributes on one of the httpHandlers