Currently i'm working on a project where I need to use Python 3.3 and celery.
I've been following the first steps tutorial, but i keep getting errors due to problems with librarys like _subprocess. Does annyone have some more information on this.
I also tried replacing the _subprocess with _winapi, with more errors as result. I'm open for anny suggestions. anny help on the mather would be appriciated.
ps:
I'm working on a windows machine.
I'm using RabbitMq as broker
celery doesn't yet work perfectly with python3.3 on windows it seems.
I ran the exact same setup on linux fedora and got it to work.
This problem should be fixed in future development of the package so be patient.
Related
I am working with Jupyter notebook for some studying. I just updated all my python libraries and now when I start a new python notebook, it just continuously says connecting to kernel in yellow.
Do I have to change something using my terminal to tell my mac to use the localhost? I have been trying to initiate an EC2 instance for another project, which I put on hold until I can figure out why that is not working, but now I can't connect locally anymore.
Sorry, I am so vague in my explanation but it is literally my first time trying to remote connect and now I think I might have messed up the paths or something.
I am reading something about websockets on git?
Any and all help is greatly appreciated!
I ended up uninstalling and reinstalling anaconda. This seems to have fixed it.
I fixed it by downgrade tornado to 5.1.1 version.
Apparently, the 6.0 version has some issues.
Reference
https://github.com/jupyter/notebook/issues/4399
I am very experienced with eclipse, using it since its Juno days, but today i have ran into one of the strangest bugs and want to know if any of you have had this bug and if you may have an answer as to how to fix it. (Or at least a work-around to getting my favorite IDE working again).
I recently updated to Ubuntu 16.04 (Xenial) and it seems nothing wants to work like it did when i had Wiley, namely eclipse. I used the installer to download the IDE and launched it and i got a strange issue where the IDE would load and ask for a workspace, but would then show a dialog box that is using the screen buffer as its data.
Screenshot with strange eclipse launch
I then thought that it may be an issue with the downloaded file (Corruption or something) so i downloaded the tar from eclipse.org directly. I extracted the tar and launched the eclipse executable and it loaded up and asked for a workspace again and began to launch, and finally it came up, the same old back buffered box.
So i got the idea to run it from the console and got this output, but i have no idea what it means. I saw no stack traces so im sure its fine (Again it may be a GTK error, so any ubuntu people this is where you come in)
Console Run with the same problem
I started to think it was my java version (Oracle JDK 9 for Linux)that was the problem so i did a test compile of the hello world program and everything was fine, it all worked.
(Would add screen shots but im new here so i dont have enough reputation to do so :( )
Any idea what it might be? Any help would be great!
I found the problem, i installed the latest version of java in the apt repository. This version was JDK9 which Eclipse does not support (At least not until Eclipse Oxygen). I purged the computerof JDK9 and installed JDK8 and everything worked fine!
Moral of the story, don't use JDK9 on Neon
I am running a dual boot windows 10 and Ubuntu 16.04, I have similar issue where I can see all the file menu and the eclipse launched on the tool bar, I have selected the application and used ctrl+WindowsKey+left,right to split the application to half of my screen and then magically it appeared,Then I adjusted to fit to my screen.
Would a fresh install work? I didn't have any issues. Perhaps ask this on ask ubuntu, too.
im running a linux box with gtk3 and was re-installing my STS today.
I was choosing the x64 version based on eclipse 4.6 and everything went fine after starting the new installed STS version.
Then i decided to check for updates and was installing the suggested packages (i didnt install any own custom packages/plugins yet).
After the restart the GUI seems to be broken. Please see the Screenhot: http://imgur.com/0lAtByT
Im working already since some years with STS on Linux but never found this strange behavior. Anyone a idea what could fix this problem?
Try:
-Dswt.enable.autoScale=false
when starting STS.
I've been fighting a whole day with UNIX utilities - so sorry if I appear confused! I'm describing my painful and (so far) fruitless process a little because maybe someone may correct me, or maybe describing the process might be helpful to someone later on. If you want to skip this, the question is bolded below.
So I'm trying to convert a Linux program developed using kdevelop. I'm trying to make it run on Windows 7. (This is the SHoUT Speech Took mentioned here, developed by Marijn Huijbregts).
I've wasted half a day trying to install kdevelop on Windows, only to understand that kdevelop can't run on Windows and that I've been installing KDE all that time :( (If kdevelop CAN run on Windows, information would be highly appreciated).
OK, so following the advice in SO's Best environment to port C/C++ code from Linux to Windows, I installed MinGW32 only to find out that SHoUT's makefile contains targets such as aclocal, autoheader etc. - I've come face to face with the hitherto unknown GNU Build System.
I'm now in the middle of installing GnuWin32 using GetGnuWin32. This is taking hours. And I suspect that once it finishes, I'll stumble on something else.
A day of pain - and still not one code line compiled :((.
So, I'm thinking about an alternative approach: Install Linux and run kdevelop as a cross-compiler to compile to Windows. As this is a console application, MAYBE it'll be easier.
So, finally, my question:
If I want to install Linux guest in VMWare Workstation (8, running on Windows 7 host), I understand I need a "distribution". I understand there's a ton of distributions, some free, some paid.
Which distribution should I choose which would run kdevelop and be as simple as possible? I just want to ##$$ing compile, and I can't stand one more day like this...
Avi
Edit:
I've tried compiling the code using VS - very tedious. Many differences between Linuix/GCC and windows/MSVC. Moreover, this is code deveoped by someone else, and I'm not even sure that the program sovles the business needs. So I've decided on the following process:
Configure Linux and run the software on Linux.
Validate that program solves business rule. If not - Abort.
Try cross oompiling on Linux. If running on Windows, verify by comparing outputs to those obtained on Linux. If good - Done.
Try compiling on Windows using ported Windows versions of the GNU Build tools. Use understanding and values obtained from building on the Linux target. If good - Done. Else
Abend and try another solution to the business problem, or try the MS tools (again using understanding and values obtained from building on the Linux target).
Many distributions are possible. Mandriva is KDE based.
But you can also install a Debian distribution, and install KDE in it.
I suggest to contact the ShOUT project community.
You should not cross-compile. MinGW can come handy but it is not required. What you need is to port the code and its dependencies to Windows, and there is nothing wrong if you use Visual Studio, for example.
I am using Ubuntu on VirtualBox OSE and through it use kdevelop and it runs seamlessly. Alternatively you can try kubuntu.
Why VirtualBox OSE - Free, Mature
It is easier to compile with MinGW on Windows than cross compile on Linux.
Build system... It could be quite easy to write Your own. Much easier than actual porting of C++ code. Could be even easier than using GNU Build System.
Please DON'T install Linux! It will take you another half a day and another questions asked here if you're doing it for the first time.
Just install VirtualBox and grab some VirtualBox image from some site. Kubuntu should be working fine with your KDE stuff: http://virtualboxes.org/images/kubuntu/
It will get you a running KDE Linux in just 5 minutes.
I have some time now working with the BlackBerry's Eclipse Plugin with no issues using the Curve 8530 Simulator. Im trying to add the Torch 9800 Simulator but I get this:
Im pretty new on the BB Stuff.
Im I missing something?
Is there a debug-enabled version (I check and apparently the version that I have should be pretty capable of debugging)?
Help will be appreciated.
Edit: I noticed that I can only add simulators using OS v.5 (e.i BlackBerry Storm2 9550). But the why is still a mystery to me.
I've been looking for this issue for over a week, and the only think i can think of (yet not confirm) is that there are no debugging versions for OS other than 5x.
I was able to debug using all available models for OS5x (Pearl, Tour, Storm, Storm2, Bold, Curve)
So the official answer to this (until some one comes up with a more complete one) is...
There is no support for web debugging on versions other than OS 5x Simulators.
Not quite, I have a 4.6.0 simulator here (8220 "T-MobileEU" branded) that is debugging capable, but my 5.0.0 simulator (8530) is not listed as capable. The confusion continues.