I am trying to compile linux 3.5.2 kernel. I followed this tutorial
"http://blog.techveda.org/index.php/adding-system-calls-linux-kernel-3-5-x/"
and everything was going perfect.but when I tried to do build the kernel I get this error
here are the commands I used to build my kernel
sudo cp /boot/config-3.5.0-17-generic ./config
make oldconfig
sudo make -j8
the error when I do the make -j8 is:
ERROR: "__modver_version_show" [drivers/staging/rts5139/rts5139.ko] undefined!
WARNING: modpost: Found 2 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
I really can't find what is the problem it looks like I have a problem with a driver but how could this happen and I am using my old configuration file that is already working. ??
I have met the same problem while compiling kernel 3.2, and solve it by "su -" to root and then recompile.
If you do not need this driver simply mod the config fiel like follows:
CONFIG_RTS5139=n
Related
My environment: python3.8, gcc12.2, cmake4.3. I want to compile and install the glibc library. When I finish compiling and installing, my yum has an error
The following is the error content：
CRITICAL:yum.cli:Config error: Error accessing file for config file:///etc/yum.conf
But I obviously have /etc/yum.conf, but I still get an error
I hope to know why and get a solution, thank you
I downloaded and compiled glibc, and the installation was successful, but there was an error message after installation
collect2: error: ld returned 1 exit status
Execution of gcc failed!
The script has found some problems with your installation!
Please read the FAQ and the README file and check the following:
- Did you change the gcc specs file (necessary after upgrading from
Linux libc5)?
- Are there any symbolic links of the form libXXX.so to old libraries?
Links like libm.so -> libm.so.5 (where libm.so.5 is an old library) are wrong,
libm.so should point to the newly installed glibc file - and there should be
only one such link (check e.g. /lib and /usr/lib)
You should restart this script from your build directory after you've
fixed all problems!
Btw. the script doesn't work if you're installing GNU libc not as your
primary library!
make[1]: *** [Makefile:111: install] Error 1
make[1]: Leaving directory '/opt/glibc-2.29'
make: *** [Makefile:12：install] 错误 2
But I found on the net that this error doesn't affect anything
I am trying to build a Linux kernel version rpi-4.14 for Raspberry Pi on Linux system.
The build is done with cross compiler arm-linux-gnueabihf with the configuration bcm2709_defconfig.
I'm running the command:
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- zImage modules dtbs
But I get the following error:
arch/arm/boot/dts/overlays/midi-uart0-overlay.dts:4:39: fatal error: dt-bindings/clock/bcm2835.h: No such file or directory
compilation terminated.
scripts/Makefile.lib:328: recipe for target 'arch/arm/boot/dts/overlays/midi-uart0.dtbo' failed
make[2]: *** [arch/arm/boot/dts/overlays/midi-uart0.dtbo] Error 1
scripts/Makefile.build:587: recipe for target 'arch/arm/boot/dts/overlays' failed
make[1]: *** [arch/arm/boot/dts/overlays] Error 2
arch/arm/Makefile:350: recipe for target 'dtbs' failed
make: *** [dtbs] Error 2
The file dt-bindings/clock/bcm2835.h is in place, so I do not really know what the problem is.
The error is telling you that there is a file missing.
arch/arm/boot/dts/overlays/midi-uart0-overlay.dts:4:39: fatal error: dt-bindings/clock/bcm2835.h: No such file or directory
Check if the directory exists, look for the file you need and change the directory in the Makefile.
In my case it was an erroneous symbolic link under arch/arm/boot/dts/include. The kernel sources have been packed/unpacked by 7z, maybe that was an issue.
Solved it via
ln -s ~/kernel-building/linux-raspberrypi-kernel_1.20170703-2/include/dt-bindings arch/arm/boot/dts/include/dt-bindings
Trying to link in relative to the current directory did not work.
I have a problem by compiling a driver (WLAN-dongle Edimax ac600).
I´m using an Archlinux on my raspberry-pi and want to install my dongle for 5Ghz. During comiling the driver I get this message. I tried to install the linux-headers without success. (in other threads it will be a solution)
Here is my output of make:
[root#raspberry_pi_1 rtl8812AU]# make make ARCH=arm CROSS_COMPILE= -C
/lib/modules/4.9.43-1-ARCH/build M=/root/rtl8812AU modules make[1]:
*** /lib/modules/4.9.43-1-ARCH/build: No such file or directory. Stop. make: *** [Makefile:1576: modules] Error 2
I found out that my pi has a two-arch...-directories:
4.9.43-1-ARCH/
4.9.51-1-ARCH/
Only the second one has the build directory...
How can I fix the problem?!
thanks a lot,
a Linux noob...
[Reputation is too low to post comment]
Use uname -r to make sure which version of the kernel you use.
If it's 4.9.43 : you have newer version of the kernel and this confuse your installer. You should reboot on the 51 one
If it's 4.9.51 : You messed up your installation step and are trying to compile for an old target. You should review the compilation process and change every mention of the 4.9.43 to 4.9.51 since it's the version you use.
If you upgrade your kernel, you may have to rebuild the thing again (You may like to have script in the future ;) ) with the new kernel version.
I am trying to install QODBC drivers on ubuntu 13.10 for Qt 5.0.2. I have followed the official documentation (see http://qt-project.org/doc/qt-5/sql-driver.html#qodbc) but am stuck at one of the steps. When I try to do
qmake "INCLUDEPATH+=/usr/local/unixODBC/include" "LIBS+=-L/usr/local/unixODBC/lib -lodbc"
it just shows me the help manual for qmake and does nothing.
So I tried to make an empty Makefile and then passed it as an argument
qmake "INCLUDEPATH+=/usr/local/unixODBC/include" "LIBS+=-L/usr/local/unixODBC/lib -lodbc" Makefile
when I try to "make" the generated Makefile, it shows the following errors:
Makefile:183: warning: overriding commands for target `Makefile'
Makefile:130: warning: ignoring old commands for target `Makefile'
make: Circular Makefile <- Makefile dependency dropped.
make: Circular Makefile <- Makefile dependency dropped.
make: Nothing to be done for `first'.
I have just managed to make the odbc driver installation. The main problem here seems to be that you are not including the "pro" target file.
Here all the steps are:
Go to odbc pluggin path. In my case: cd ~/Qt/5.3/Src/qtbase/src/plugins/sqldrivers/odbc
Run qmake including the target LIB paths and also the pro file:
~/Qt/5.3/gcc_64/bin/qmake -makefile "INCLUDEPATH+=/usr/local/include" "LIBS+=-L/usr/local/lib -lodbc" odbc.pro
make and then sudo make install
I hope it will be usefull.
Regards,
I'm trying to install glibc to debug a C-framework I'm working on. But, I'm getting an error in the build process. Here's the error msg:
make[3]: Leaving directory `/root/glibc-source/glibc-2.14/elf'
/usr/bin/install -c /root/glibc-2.14-build/elf/ld.so /usr/local/myglibc/lib/ld-2.14.so.new
mv -f /usr/local/myglibc/lib/ld-2.14.so.new /usr/local/myglibc/lib/ld-2.14.so
/usr/bin/install -c /root/glibc-2.14-build/libc.so /usr/local/myglibc/lib/libc-2.14.so.new
mv -f /usr/local/myglibc/lib/libc-2.14.so.new /usr/local/myglibc/lib/libc-2.14.so
echo ld-2.14.so /usr/local/myglibc/lib/ld-linux-x86-64.so.2 >> /root/glibc-2.14-build/elf/symlink.list
/usr/bin/install -c /root/glibc-2.14-build/elf/sotruss-lib.so /usr/local/myglibc/lib/audit/sotruss-lib.so.new
mv -f /usr/local/myglibc/lib/audit/sotruss-lib.so.new /usr/local/myglibc/lib/audit/sotruss-lib.so
make[2]: *** No rule to make target `/root/glibc-2.14-build/dlfcn/libdl.so.2', needed by `/root/glibc-2.14-build/elf/sprof'. Stop.
make[2]: Leaving directory `/root/glibc-source/glibc-2.14/elf'
make[1]: *** [elf/subdir_install] Error 2
make[1]: Leaving directory `/root/glibc-source/glibc-2.14'
make: *** [install] Error 2
Is this a known problem?
I had built glibc on the same machine earlier last week without any errors. I'm rebuilding it because glibc is compiled with optimization level 2(-O2) by default and I'm unable to look into the values of a few variables inside the library functions from the code dump as they've been optimized out. I'm currently trying to compile with optimization level 1.
Thanks
It looks like you are trying to make install, without first doing a successful make all.
This is for the benefit of anyone who might be trying to build glibc on their ubuntu box.
I went through the following problems and resolved them the following way.
These problems were encountered in ubuntu 12.04
I created a directory glib-build on the same level as the glib-VERSION and ran the following command
$> ../glibc-2.16.0/configure --prefix=/home/gugovind/tsapp/glibc/glibc-build/
that gave me the following error that makeinfo is missing.
for that
$>sudo apt-get install texinfo
will resolve the problem.
It threw and error about LD_LIBRARY_PATH having the current directory (even if it does not exist)
for that run the following in your command prompt
$>set LD_LIBRARY_PATH
this will clear the LD_LIBRARY_PATH only for that console temporarily. Then run the configure again.
You might encounter another problem with configure..
"function strtonum never defined"
look at the config.log file and it might be missing mawk or gawk. install them using
sudo apt-get install gawk
This should get you through the configure part.
now run
make all
if in case you encounter a particular file not compiling.. just copy the gcc ... before that and paste it in the command prompt again after you have cd to that directory (the command lines before the error should tell you where to go.)
make install
You might get a warning about not able to find etc/ld.config... file. ignore that..
you are all set now.