I would like to display the last word in these lines I tried to look for example the word value but no answer, so I thought to look for the words between quotes but my file contains other words between quotes that I have I need not actually want to display the values of the select tag knowing that my html file is.
grep '*' hosts.html | awk '{print $NF}'
For example:
value='www.visit-tunisia.com'>www.visit-tunisia.com
value='www.watania1.tn'>www.watania1.tn
value='www.watania2.tn'>www.watania2.tn
I would have
www.visit-tunisia.com
www.watania1.tn
www.watania2.tn
You need to set the field separator to > you do this with the -F option:
$ awk -F'>' '{print $NF}' hosts.html
www.visit-tunisia.com
www.watania1.tn
www.watania2.tn
Note: I'm not sure what you are trying to achieve by grep '*' hosts.html?
Interpreting the comment liberally, you have input lines which might contain:
value='www.visit-tunisia.com'>www.visit-tunisia.com
value='www.watania1.tn'>www.watania1.tn
value='www.watania2.tn'>www.watania2.tn
and you would like the names which are repeated on a line as the output:
www.visit-tunisia.com
www.watania1.tn
www.watania2.tn
This can be done using sed and capturing parentheses.
sed -n -e "s/.*'\([^']*\)'.*\1.*/\1/p"
The -n says "don't print unless I say to do so". The s///p command prints if the substitute works. The pattern looks for a stream of 'anything' (.*), a single quote, captures what's inside up to the next single quote ('\([^']*\)') followed by any text, the captured text (the first \1), and anything. The replacement text is what was captured (the second \1).
Example:
$ cat data
www and wotnot
value='www.visit-tunisia.com'>www.visit-tunisia.com
blah
value='www.watania1.tn'>www.watania1.tn
hooplah
value='www.watania2.tn'>www.watania2.tn
if 'nothing' is required, nothing will be done.
$ sed -n -e "s/.*'\([^']*\)'.*\1.*/\1/p" data
www.visit-tunisia.com
www.watania1.tn
www.watania2.tn
nothing
$
Clearly, you can refine the [^']* part of the match if you want to. I used double quotes around the expression since the pattern matches on single quotes. Life is trickier if you need to allow both single and double quotes; at that point, I'd put the script into a file and run sed -f script data to make life easier.
sed 's/.*>\(.*\)/\1/g' your_file
Related
I got a file with ^$ as delimiter, the text is like :
tony^$36^$developer^$20210310^$CA
I want to replace the datetime.
I tried awk -F '\^\$' '{print $4}' file.txt | sed -i '/20210310/20221210/' , but it returns nothing. Then I tried the awk part, it returns nothing, I guess it still treat the line as a whole and the delimiter doesn't work. Wondering why and how to solve it?
A simple solution would be:
sed 's/\^\$/\n/g; s/20210310/20221210/g' -i file.txt
which will modify the file to separate each section to a new line.
If you need a different delimiter, change the \n in the command to maybe space or , .. up to you.
And it will also replace the date in the file.
If you want to see the changes, and really modify the file, remove the -i from the command.
When I run your awk command, I get these warnings:
awk: warning: escape sequence `\^' treated as plain `^'
awk: warning: escape sequence `\$' treated as plain `$'
That explains why your output is blank: the field delimiter is interpreted as the regular expression '^$', which matches a completely blank line (only). As a result, each non-blank line of input is without any field separators, and therefore has only a single field. $4 can be non-empty only if there are at least four fields.
You can fix that by escaping the backslashes:
awk -F '\\^\\$' '{print $4}' file.txt
If all you want to do is print the modified datecodes py themselves, then that should get you going. However, the question ...
How to extract and replace columns with a multi-character delimiter?
... sounds like you may want actually to replace the datecode within each line, keeping the rest intact. In that case, it is a non-starter for the awk command to discard the other parts of the line. You have several options here, but two of the more likely would be
instead of sending field 4 out to sed for substitution, do the sub in the awk script, and then reconstitute the input line by printing all fields, with the expected delimiters. (This is left as an exercise.) OR
do the whole thing in sed:
sed -E 's/^((([^^]|\^[^$])*\^\$){3})20210310(\^\$.*)/\120221210\4/' file.txt
If you wanted to modify file.txt in-place then you could add the -i flag (which, on the other hand, is not useful in your original command, where sed's input is coming from a pipe rather than a file).
The -E option engages the POSIX extended regex dialect, which allows the given regex to be more readable (the alternative would require a bunch more \ characters).
Overall, presuming that there are five or more fields delimited by literal '^$' strings, and the fourth contains exactly "20210310", that matches the first three fields, including their trailing delimiters, and captures them all as group 1; matches the leading delimiter of the fifth field and all the remainder of the line and captures it as group 4; and substitutes replaces the whole line with group 1 followed by the new datecode followed by group 4.
I'm trying to write a script and one of the parts of the script requires me to concatenate some variables together to create a URL.
REPO_URL='https://github.com/Example/Repo.Game/'
FILENAME='Example.Game-linux.zip'
latest_version="$(curl -LIs "${REPO_URL}/releases/latest" | grep -i '^location:' | cut -d' ' -f2 | cut -d'/' -f8)"
echo "$latest_version"
echo "$FILENAME"
echo "$REPO_URL"
echo "${REPO_URL}releases/download/${latest_version}/${FILENAME}"
Output:
2.0.5164
Example.Game-linux.zip
https://github.com/Example/Repo.Game/
/Example.Game-linux.ziple/Repo.Game/releases/download/2.0.5164
My actual output:
2.0.5164
Oxide.Rust-linux.zip
https://github.com/OxideMod/Oxide.Rust/
/Oxide.Rust-linux.zipideMod/Oxide.Rust/releases/download/2.0.5164
It looks like some kind of overflow problem? I'm not exactly sure. I added abcabc to the filename and the output became
/Oxide.Rust-linux.zipabcabc/Oxide.Rust/releases/download/2.0.5164
Any help would be appreciated.
I resolved the problem by removing the carriage return value from the variable.
tr -d '\r' seems to have resolved it. I'm not sure where the variable came from and if anyone has advice on how to clean up this mess I would love some advice.
latest_version="$(curl -LIs "${REPO_URL}/releases/latest" | grep -i '^location:' | cut -d' ' -f2 | cut -d'/' -f8 | tr -d '\r')
You can use ANSI quoting, and variable substitution to remove control characters from variables without having to invoke sub-shells.
ANSI quoting uses the special format $'\*' to represent special characters. For example use $'\t' for tab, $'\n' for new-line and $'\r' for carriage-return.
Variable substitution uses extra characters at the end of the variable name to perform actions on the variable. For example
${variable//[pattern]/[substitution]} will replace all instances of [pattern] in ${variable} with [substitution].
${variable%[pattern]} will remove [pattern] from ${variable} if it is at the end.
By combining these two, you can remove carriage-return characters from the end of your variable like this:
echo ${variable%$'\r'}
Note: Variable substitution doesn't actually change the contents of the variable. To do that, you have to re-assign the result back to the variable:
variable="${variable%$'\r'}"
There is a cleaner way to get the version number, minus any trailing carriage-return, from github using sed.
latest_version =$(curl -LIs "${REPO_URL}/releases/latest" | sed -n 's/^Location:.*\/\([^\r]*\).*$/\1/p')
sed reads every line of input (STDIN by default) and performs operations on it defined by the action string parameter. The action string is a little tricky to explain in this case, but here goes:
The -n option suppresses the printing of each input line. Output will then only happen if it is explicitly stated in the action string.
The s/[pattern]/[substitution]/p construct says whenever you find [pattern], replace it with [substitution] and print it. Our [pattern] is ^Location:.*\/\(.*\)$, and our [substitution] is \1.
The expression ^ matches the beginning of the line.
The expression . means any single character, and the expression .* means any number of characters (including zero). This will match the largest possible string, so, for example .*/ will match abc/def/ in the string abc/def/ghi.
The expression \/ just escapes the forward slash (because we are using backslash as a delimiter, we have to escape it).
The expression \([pattern]\) says any time you find [pattern], remember it. in our case, it will remember whatever matches [^\r].
The expression [{chars}] matches any one of the characters in {chars}. [^{chars}] matches any character that is not in {chars}. so [^\r]* matches any number of characters that is not a carriage return.
The expression $ matches the end of a line.
The expression \1 is replaced by the first remembered pattern.
So altogether, our action string says:
If you find a line that starts with Location:, followed by any number of characters, followed by a /, followed by any number of characters that are not a carriage return (which will be remembered), followed by any number of characters, followed by an end of line, then print the remembered characters.
I'm new to shell scripting. My requirement is to retrieve lines between two pattern, its working fine if I run it from the terminal without using variables inside sed cmd. But the problem arises when I put all those below cmd in a file and tried to execute it.
#!/bin/sh
word="ajp-qdcls2228.us.qdx.com%2F156.30.35.204-8009-34"
upto="2017-01-03 23:00"
fileC=`cat test.log`
output=`echo $fileC | sed -e "n/\$word/$upto/p"`
printf '%s\n' "$output"
If I use the below cmd in the terminal it works fine
sed -n '/ajp-qdcls2228.us.qdx.com%2F156.30.35.204-8009-34/,/2017-01-03 23:00/ p' test.log
Please suggest a workaround.
If we put aside for a moment the fact you shouldn't cat a file to a variable and then echo it for sed filtering, the reason why your command is not working is because you're not quoting the file content variable, fileC when echoing. This will munge together multiple whitespace characters and turn them into a single space. So, you're losing newlines from the file, as well as multiple spaces, tabs, etc.
To fix it, you can write:
fileC=$(cat test.log)
output=$(echo "$fileC" | sed -n "/$word/,/$upto/p")
Note the double-quotes around fileC (and a fixed sed expression, similar to your second example). Without the quotes (try echo $fileC), your fileC is expanded (with the default IFS) into a series of words, each being one argument to echo, and echo will just print those words separated with a single space. Additionally, if the file contains some of the globbing characters (like *), those patterns are also expanded. This is a common bash pitfall.
Much better would be to write it like this:
output=$(sed -n "/$word/,/$upto/p" test.log)
And if your patterns include some of the sed metacharacters, you should really escape them before using with sed, like this:
escape() {
sed 's/[^^]/[&]/g; s/\^/\\^/g' <<<"$1";
}
output=$(sed -n "/$(escape "$word")/,/$(escape "$upto")/ p" test.log)
The correct approach will be something like:
word="ajp-qdcls2228.us.qdx.com%2F156.30.35.204-8009-34"
upto="2017-01-03 23:00"
awk -v beg="$word" -v end="$upto" '$0==beg{f=1} f{print; if ($0==end) exit}' file
but until we see your sample input and output we can't know for sure what it is you need to match on (full lines, partial lines, all text on one line, etc.) or what you want to print (include delimiters, exclude one, exclude both, etc.).
I have a file "test.txt" with the lines below and also lot bunch of extra stuff after the "version"
soainfra_metrics{metric_group="sca_composite",partition="test",is_active="true",state="on",is_default="true",composite="test123"} map:stats version:1.0
soainfra_metrics{metric_group="sca_composite",partition="gello",is_active="true",state="on",is_default="true",composite="test234"} map:stats version:1.8
soainfra_metrics{metric_group="sca_composite",partition="bolo",is_active="true",state="on",is_default="true",composite="3415"} map:stats version:3.1
soainfra_metrics{metric_group="sca_composite",partition="solo",is_active="true",state="on",is_default="true",composite="hji"} map:stats version:1.1
I tried:
egrep -r 'partition|is_active|state|is_default|composite' test.txt
It's displaying every line, but I need only specific mentioned fields like this below,ignoring rest of the data/stuff or lines
in a nut shell, i want to display only these fields from a line not the rest
partition="test",is_active="true",state="on",is_default="true",composite="test123"
partition="gello",is_active="true",state="on",is_default="true",composite="test234"
partition="bolo",is_active="true",state="on",is_default="true",composite="3415"
partition="solo",is_active="true",state="on",is_default="true",composite="hji"
If your version of grep supports Perl-style regular expressions, then I'd use this:
grep -oP '.*?,\K[^}]+' file
It removes everything up to the first comma (\K kills any previous output) and prints everything up to the }.
Alternatively, using awk:
awk -F'}' '{ sub(/[^,]+,/, ""); print $1 }' file
This sets the field separator to } so the part you're interested in is the first field. It then uses sub to remove the part up to the first comma.
For completeness, you could also use sed:
sed 's/[^,]*,\([^}]*\).*/\1/' file
This captures the part after the first , up to the } and replaces the content of the line with it.
After the grep to pick out the lines you want, use sed to edit the lines:
sed 's/.*\(partition[^}]*\)} map.*/\1/'
This means: "whenever you see anything .*, followed by partition and
any number of non-}, then } map and anything else, grab the part
from partition up to but not including the brace \(...\) as group 1.
The replacement text is just group 1 \1.
Use a pipe | to connect the output of egrep to the input of sed:
egrep ... | sed ...
As far as i understood your file might have more lines you don't want to see, so i would use:
sed -n 's/.*\(partition.*\)}.*/\1/p' file
we use -n p to show only lines where we made substitution. The substitution part just gets the part of the line you need substituting the whole line with the pattern.
This might work for you (GNU sed):
sed -r 's/(partition|is_active|state|is_default|composite)="[^"]*"/\n&\n/g;s/[^\n]*\n([^\n]*)\n[^\n]*/\1,/g;s/,$//' file
Treat the problem as if it were a "decomposed club sandwich". Identify the fillings, remove the bread and tidy up.
I'm stumped with how to remove a portion of a string that has forward slashes and question marks in it.
Example: /diag/PeerManager/list?deviceid=RXMWANT8WFYJNF7K6DXXXJLJVN
and I need the output to be RXMWANT8WFYJNF7K6DXXXJLJVN
I've tried tr and sed but tr removes some of the characters I need in the output. sed is giving me trouble because of the forward slashes.
What's a quick method to remove the /diag/PeerManager/list?deviceid= portion of my string?
thanks!
echo "/diag/PeerManager/list?deviceid=RXMWANT8WFYJNF7K6DXXXJLJVN" | sed -n 's:/[a-zA-Z]/[a-zA-Z]/[a-zA-Z]?[a-zA-Z]=::p'
This should do the trick. I chose the colon as the delimiter as it will not cause any issues with the forward slash. This makes a lot of assumptions about the type of input it will be receiving, specifically that it will only contain three backslashes with lower and uppercase letters between them, a series of letters ending in a question mark, another series of letters ending in an equals sign. This then removes those items and prints the remaining characters (your device id).
This worked for me:
sed 's/.*deviceid=\([^&]*\).*/\1/'
Example:
$ echo '/diag/PeerManager/list?deviceid=RXMWANT8WFYJNF7K6DXXXJLJVN' | sed 's/.*deviceid=\([^&]*\).*/\1/'
RXMWANT8WFYJNF7K6DXXXJLJVN
This is not the most robust solution, but if you have a fixed set of input that will never change, it's probably good enough.
One way using awk, if there is only a single occurrence of an = on each line:
awk -F= '{ print $2 }' file.txt
Results:
RXMWANT8WFYJNF7K6DXXXJLJVN
Use Equals Sign as Field Delimiter
If you know that your GET query string will always have only one parameter (in this case, deviceid) then you can just use the equals sign as a field delimiter with the standard cut utility. For example:
$ echo '/diag/PeerManager/list?deviceid=RXMWANT8WFYJNF7K6DXXXJLJVN' |
cut -d= -f2-
RXMWANT8WFYJNF7K6DXXXJLJVN
How about:
$ echo /diag/PeerManager/list?deviceid=RXMWANT8WFYJNF7K6DXXXJLJVN | sed 's/^.*=//'
RXMWANT8WFYJNF7K6DXXXJLJVN