How can I select different portions of multiple non-contiguous lines and replace them with the same/different text?
Example: Let's say my buffer looks like this-
Roses are reed,
Violets aree blue,
Sugaar is sweet,
And so are you,
I want to change in 1st line the 3rd word ('reed') to 'red, yellow and green', in 2nd line 'aree' to 'are', in 3rd line 'Sugaar' to 'Sugar and molasses' and in 4th line 'you,' to 'you.'.
Say my cursor is at 'R' of 'Roses'. I want to select all four of these wrongs at once and nothing other the wrongs. After I'm done selecting I want to be able to move to 'reed' by pressing some key (say Ctrl+j), then after changing I want to be able to press some key (say Ctrl+j) and move the next visual selection which is 'aree'.
Is there any plugin that does this?
There are multiple cursors plugins that attempt to create parallel editing functionality seen in other editors to Vim (which is difficult). If I understand your use case right, that wouldn't help here, though, because all places would be edited in the same way (so reed, areee, etc. would all be replaced with the same red).
Instead, what you seem to be asking for, is a way to search for all wrongly spelled words, and then edit them one by one, individually. You can do this with standard search, using regular expression branches:
/reed\|areee\|Sugaar\|you,/
You can then simply press next to go to the next match after you're done. Note that the branches have to be unique (so I searched for you, instead of simply ,). Adding word boundaries (\<reed\> instead of reed) is a good idea, too.
plugin recommendations
multiple cursors is a famous plugin for parallel editing
My SearchAlternatives plugin lets you add the current word under the cursor as a search branch with a quick (<Leader>+ by default) key mapping. (However, if you're already on the word, why not correct it immediately?)
My SpellCheck plugin populates the quickfix list with all misspelled words and locations. You can then use quickfix navigation (e.g. :cnext) to quickly go to each. The plugin also offers mappings to fix spelling errors directly from the quickfix list.
I would like to extract some data from a piece of text with Vim. The input looks like so:
72" title="(168,72)" onmouseover="posizione('(168,72)');" onmouseout="posizione('(-,-)');">>
72" title="(180,72)" onmouseover="posizione('(180,72)');" onmouseout="posizione('(-,-)');">>
72" title="(192,72)" onmouseover="posizione('(192,72)');" onmouseout="posizione('(-,-)');">>
72" title="(204,72)" onmouseover="posizione('(204,72)');" onmouseout="posizione('(-,-)');">>
The data I need to extract is contained in the title="(168,72)" portions of the input. In particular, I am interested in extracting coordinate pairs in parentheses.
I thought about using Vim to first delete everything before title=", but I am not really a regex guru, so I am asking you. If anyone has any hint, please let me know! :)
This will replace each line with a tab-delimited list of coordinates per line:
:%s/.* title="(\(\d\+\),\(\d\+\))".*/\1\t\2
This task can be achieved with a much simpler solution and with few keystrokes using normal command:
:%normal df(f)D
This means:
% - Run normal command on all file lines;
normal - run the following commands in normal mode;
df( - delete everything until you find a parenthesis (parenthesis included);
f) - move the cursor to );
D - delete everything until the end of the line.
You can also set a range, for example, run this from line 5 to 10:
:5,10normal df(f)D
If you want an ad hoc solution for this one-off case, it might be quicker simply to select a visual block using CTRL-v. This will let you select an arbitrary column of text (in your case, the column containing title="(X,Y)"), which can then be copied as usual using y.
you can match everything inside title=() and discard everything else like this:
:%s,.*title="(\(.*\))".*,\1,
I have this dataset in a csv file
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504, 0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644, 0.00078635, 0.000730052, 0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669, 0.00230171, 0.00217917
As you can see, the numbers are formatted differently and misaligned. Is there a way in vim to quickly align the columns properly, so that the result is this
1.33570301776, 3.61194e-06, 7.24503e-06, -9.91572e-06, 1.25098e-05, 0.0102828, 0.010352, 0.0102677, 0.0103789, 0.00161604, 0.00167978, 0.00159998, 0.00182596, 0.0019804, 0.0133687, 0.010329, 0.00163437, 0.00191202, 0.0134425
1.34538754675, 3.3689e-06, 9.86066e-06, -9.12075e-06, 1.18058e-05, 0.00334344, 0.00342207, 0.00332897, 0.00345504,0.00165532, 0.00170412, 0.00164234, 0.00441903, 0.00459294, 0.00449357, 0.00339737, 0.00166596, 0.00451926, 0.00455153
1.34808186291, -1.99011e-06, 6.53026e-06, -1.18909e-05, 9.52337e-06, 0.00158065, 0.00166529, 0.0015657, 0.0017022, 0.000740644,0.00078635, 0.000730052,0.00219736, 0.00238191, 0.00212762, 0.00163783, 0.000750669,0.00230171, 0.00217917
That would be great to copy and paste sections with ctrl-v. Any hints?
If you're on some kind of UNIX (Linux, etc), you can cheat and filter it through the column(1) command.
:%!column -t
The above will parse on delimiters inside string literals which is wrong, so you will likely need pre-processing steps and specifying the delimiter for this file for example:
%!sed 's/","/\&/' | column -t -s '&'
Sometimes we want to align just two columns. In that case, we don't need any plugins and can use pure Vim functionality like this:
Choose a separator. In OP's post this is a comma, in my example this is =.
Add spaces before/after it. I use s/=/= ...spaces... / in visual selection for this.
Locate to the longest word and place cursor after it.
Remove all the extra whitespace using dw and vertical movement.
Example of this technique demonstrated below:
I don't find myself needing to align things often enough to install another plugin, so this was my preferred way of accomplishing it - especially that it doesn't require much thinking.
As sunny256 suggested, the column command is a great way of doing this on Unix/Linux machines, but if you want to do it in pure Vim (so that it can be used in Windows as well), the easiest way is to install the Align plugin and then do:
:%Align ,
:%s/\(\s\+\),\s/,\1/g
The first line aligns the entries on the commas and the second moves the comma so that it's flush with the preceding value. You may be able to use AlignCtrl to define a custom mapping that does the whole lot in one go, but I can never remember how to use it...
Edit
If you don't mind two spaces between entries and you want to do this in one command, you can also do:
:%Align ,\zs
This is a great answer using vim macros: https://stackoverflow.com/a/8363786/59384 - basically, you start recording a macro, format the first column, stop recording then repeat the macro for all remaining lines.
Copy/pasted from that answer:
qa0f:w100i <Esc>19|dwjq4#a
Note the single space after the 100i, and the <Esc> means "press escape"--don't type "<Esc>" literally.
Translation:
qa -- record macro in hotkey a
0 -- go to beginning of line
f: -- go to first : symbol
w -- go to next non-space character after the symbol
100i <Esc> -- insert 100 spaces
19| -- go to 19th column (value 19 figured out manually)
dw -- delete spaces until : symbol
j -- go to next line
q -- stop recording macro
4#a -- run the macro 4 times (for the remaining 4 lines)
We now also have the fabulous EasyAlign plugin, written by junegunn.
Demonstration GIF from its README:
Also, Tabularize is quite good http://vimcasts.org/episodes/aligning-text-with-tabular-vim/
You could use the csv.vim plugin.
:%ArrangeColumn
However, this will not do exactly what you have asked: it will right adjust the contents of cells, whereas you have your values aligned by the decimal point or by the first digit.
The plugin has many other useful commands for working with CSV files.
also if you have very long columns it can be handy to disable default wrapping
:set nowrap
:%!column -t
(note in debian you also have a further option for column -n which if you want to split multiple adjacent delimiters)
Here’s a pure Vim script answer, no plugins, no macros:
It might be most clear to start out with my problem’s solution as an example. I selected the lines of code I wanted to affect, then used the following command (recall that entering command mode from visual mode automatically prepends the “'<,'>”, so it acts on the visual range):
:'<,'>g``normal / "value<0d>D70|P`
Except I did NOT actually type “<0d>”. You can enter unprintable characters on the command line by pressing ctrl-v, then the key you want to type. “<0d>” is what is rendered on the command line after I typed ‘ctrl-v enter’. Here, it’s parsed by the “normal” command as the exit from “/” search mode. The cursor then jumps to “ value” in the current line.
Then we simply [D]elete the rest of the line, jump to column 70 (or whatever you need in your case), and [P]ut what we just deleted. This does mean we have to determine the width of the widest line, up to our search. If you haven’t put that information in your statusline, you can see the column of the cursor by entering the normal mode command ‘g ctrl-g’. Also note that jumping to a column that doesn’t exist requires the setting 'virtualedit'!
I left the search term for the :g(lobal) command empty, since we used a visual block and wanted to affect every line, but you can leave off using a visual selection (and the “'<,'>”) and put a search term there instead. Or combine a visual selection and a search term to narrow things more finely/easily.
Here’s something I learned recently: if you mess up on a complex command mode command, undo with ‘u’ (if it affected the buffer), then press “q:” to enter a special command history buffer that acts much like a conventional buffer. Edit any line and press enter, and the changed command is entered as a new command. Indispensable if you don’t want to have to stress over formulating everything perfectly the first time.
I just wrote tablign for this purpose. Install with
pip3 install tablign --user
Then simply mark the table in vim and do
:'<,'>:!tablign
Pretty old question, but I've recently availed myself of an excellent vim plugin that enables table formatting either on the fly or after-the-fact (as your use case requires):
https://github.com/dhruvasagar/vim-table-mode
I have this in my .vimrc.
command! CSV set nowrap | %s/,/,|/g | %!column -n -t -s "|"
This aligns the columns while keeping the comma, which may be needed later for correct reading. For example, with Python Pandas read_csv(..., skipinitialspace=True), thanks Pandas guys for this smart option, otherwise in vim %s/,\s\+/,/g. It may be easier if your column has the option --output-separator I guess, my doesn't and I'm not sure why (my man page for column says 2004, on ubuntu 18.04, not sure ubuntu will get a new version). Anyway, this works for me, and comment if you have any suggestions.
I made a cli tool written in Perl.
You can find it here: https://github.com/bas080/colcise
How do you convert all text in Vim to lowercase? Is it even possible?
I assume you want lowercase the text. Solution is pretty simple:
ggVGu
Explanation:
gg - goes to first line of text
V - turns on Visual selection, in line mode
G - goes to end of file (at the moment you have whole text selected)
u - lowercase selected area
If you really mean small caps, then no, that is not possible – just as it isn’t possible to convert text to bold or italic in any text editor (as opposed to word processor). If you want to convert text to lowercase, create a visual block and press u (or U to convert to uppercase). Tilde (~) in command mode reverses case of the character under the cursor.
If you want to see all text in Vim in small caps, you might want to look at the guifont option, or type :set guifont=* if your Vim flavour supports GUI font chooser.
use this command mode option
ggguG
gg - Goto the first line
g - start to converting from current line
u - Convert into lower case for all characters
G - To end of the file.
Similar to mangledorf's solution, but shorter and layman friendly
:%s/.*/\L&/g
Many ways to skin a cat... here's the way I just posted about:
:%s/[A-Z]/\L&/g
Likewise for upper case:
:%s/[a-z]/\U&/g
I prefer this way because I am using this construct (:%s/[pattern]/replace/g) all the time so it's more natural.
Toggle case "HellO" to "hELLo" with g~ then a movement.
Uppercase "HellO" to "HELLO" with gU then a movement.
Lowercase "HellO" to "hello" with gu then a movement.
For examples and more info please read this:
http://vim.wikia.com/wiki/Switching_case_of_characters
use ggguG
gg: goes to the first line.
gu: change to lowercase.
G: goes to the last line.
Usually Vu (or VU for uppercase) is enough to turn the whole line into lowercase as V already selects the whole line to apply the action against.
Tilda (~) changes the case of the individual letter, resulting in camel case or the similar.
It is really great how Vim has many many different modes to deal with various occasions and how those modes are neatly organized.
For instance, v - the true visual mode, and the related V - visual line, and Ctrl+Q - visual block modes (what allows you to select blocks, a great feature some other advanced editors also offer usually by holding the Alt key and selecting the text).
If you are running under a flavor of Unix
:0,$!tr "[A-Z]" "[a-z]"
I had a similar issue, and I wanted to use ":%s/old/new/g", but ended up using two commands:
:0
gu:$
Say I have the following style of lines in a text file:
"12" "34" "some text "
"56" "78" "some more text"
.
.
.
etc.
I want to be able to remove the quotes surrounding the first two columns. What is the best way to do this with Vim (I'm currently using gVim)?
I figured out how to at least delete the beginning quote of each line by using visual mode and then enter the command '<,'>s!^"!!
I'm wondering if there is a way to select an entire column of text (one character going straight down the file... or more than 1, but in this case I would only want one). If it is possible, then would you be able to apply the x command (delete the character) to the entire column.
There could be better ways to do it. I'm looking for any suggestions.
Update
Just and FYI, I combined a couple of the suggestions. My _vimrc file now has the following line in it:
let #q=':%s/"\([0-9]*\)"/\1/g^M'
(Note: THE ^M is CTRLQ + Enter to emulate pressing the Enter key after running the command)
Now I can use a macro via #q to remove all of the quotes from both number columns in the file.
use visual block commands:
start mode with Ctrl-v
specify a motion, e.g. G (to the end of the file),
or use up / down keys
for the selected block specify an action, e.g. 'd' for delete
For more see
:h visual-mode
Control-V is used for block select. That would let you select things in the same character column.
It seems like you want to remove the quotes around the numbers. For that use,
:%s/"\([0-9]*\)"/\1/g
Here is a list of what patterns you can do with vim.
There is one more (sort of ugly) form that will restrict to 4 replacements per line.
:%s/^\( *\)"\([ 0-9]*\)"\([ 0-9]*\)"\([ 0-9]*\)"/\1\2\3\4/g
And, if you have sed handy, you can try these from the shell too.
head -4 filename.txt | sed 's/pattern/replacement/g'
that will try your command on the first 4 lines of the file.
Say if you want to delete all columns but the first one, the simple and easy way is to input this in Vim:
:%!awk '{print $1}'
Or you want all columns but the first one, you can also do this:
:%!awk '{$1="";$0=$0;$1=$1;print}'
Indeed it requires external tool to accomplish the quest, but awk is installed in Linux and Mac by default, and I think folks with no UNIX-like system experience rarely use Vim in Windows, otherwise you probably known how to get a Windows version of awk.
Although this case was pretty simple to fix with a regex, if you want to do something even a bit more advanced I also recommend recording a macro like Bryan Ward. Also macros come easier to me than remembering which characters need to be escaped in vim's regexes. And macros are nice because you can see your changes take place immediately and work on your line transformation in smaller bits at a time.
So in your case you would have pressed qw to start recording a macro in register w (you can of course use any letter you want). I usually start my macros with a ^ to move to the start of the line so the macro doesn't rely on the location of the cursor. Then you could do a f" to jump to the first ", x to delete it, f" to jump to the next " and x to delete that too. Then q to finish recording.
Instead of making your macro end on the next line I actually as late as today figured out you can just V (visually line select) all lines you want to apply your macro to and execute :normal #w which applies your macro in register w to each visually selected line.
See column editing in vim. It describes column insert, but basically it should work in the same way for removing.
You could also create a macro (q) that deletes the quotes and then drops down to the next line. Then you can run it a bunch of times by telling vi how many times to execute it. So if you store the macro to say the letter m, then you can run 100#m and it will delete the quotes for 100 lines. For some more information on macros:
http://vim.wikia.com/wiki/Macros
The other solutions are good. You can also try...
:1,$s/^"\(\w\+\)"/\1/gc
For more Vim regex help also see http://vim.wikia.com/wiki/Search_patterns.
Start visual-block by Ctrl+v.
Jump at the end and select first two columns by pressing: G, EE.
Type: :s/\%V"//g which would result in the following command:
:'<,'>s/\%V"//g
Press Enter and this will remove all " occurrences in the selected block.
See: Applying substitutes to a visual block at Vim Wikia