I have a problem that have me stumped.
I have been searching for a solution, but haven't found a working one yet. The solutions I seen introduces other issues.
Here is the scenario:
I have a frameset with two frames: 'Navigator' and 'Main'.
In the 'Navigator' frame I display a form called 'Navigator'. It contains an outline, to display a menu.
In the 'Main' frame I display the view selected by the user in the navigator.
So this is a very traditional Notes client application.
I now want to add a checkbox at the top of the view (in the action bar), allowing the user to filter the view by his/her own name. I use #SetViewInfo for this, and it all works perfect.
The issue is when the user switch views. The #SetViewInfo filter stays active when switching to a different view, so after some searching I found some solutions:
In http://www-01.ibm.com/support/docview.wss?uid=swg21204481 IBM suggests to put the following code in the QuerySave event:
#SetViewInfo([SetViewFilter]; temp ; 0 ;1)
When I am switching view or closing the view, I get the error message "Cannot execute the specified command".
In http://www-10.lotus.com/ldd/bpmpblog.nsf/dx/using-setviewinfo-in-a-notes-client-application-to-create-a-user-specific-view Andre Guirard suggests to put the following code in the QuerySave event:
#SetTargetFrame("frameName");
#UpdateFormulaContext;
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "columnName"; 1)
I modify this to match my frame name and the programatic name of the first column in my view:
#SetTargetFrame("Main");
#UpdateFormulaContext;
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "Adjuster"; 1)
This works perfectly when switching between view. But when I close the application while I am in this particular filtered view, the application is re-opened automatically. This happens no matter if the filter is enabled or not when closing the view.
However, when the view repopens, the frameset is not reloaded, it is just the view with the built-in view navigator to the left.
I finally got this to work by (in the built-in view navigator) selecting another view that the one where I filter data. This fixed the issue for a while, but then it starts again, and the filtered view is active in the navigator.
Obviously it is the OpenView command that is causing this, but if I remove just that line, I get the "Cannot execute the specified command" error again.
Any suggestions/pointers? I am using Notes 8.5.3 running on Windows 7 Professional.
This question can also be found in the IBM developerWorks forum for Notes 8.5:
http://www-10.lotus.com/ldd/nd85forum.nsf/DateAllThreadedWeb/08c73910571306c485257b2b0061ef91
First thing, I would suggest to make sure your view frame is always called "NotesView". You will have much less compatibility issues if you do this.
Secondly, I presume when you say you put it in the QuerySave event you really mean the QueryClose event? Views do not have a QuerySave event.
Thirdly, I find the #UpdateFormulaContext line is not needed. This is what I have in my view QueryClose...
#SetTargetFrame("NotesView");
#Command([OpenView]; #Subset(#ViewTitle; -1));
#SetViewInfo([SetViewFilter]; ""; "<programmaticColumnName>"; 1)
And I can close the app while in the view without any problems.
Related
One of my clients has a replica copy of a database on two different Domino Servers. On one of the servers if the user clicks on any white space on a view or form they get the following error:
While the database on the test server does not throw this error. My server likewise does not throw this error either. as far as I can determine they are both running the same release of Domino.
I have search my code but can't find any reason for this error.
Any pointers where to look.
Check for eventHandlers on your page, looking for one associated to a component that does not have an ID. I think what happens is that if you have an eventHandler on a button, comboBox etc that does not have an ID, it gets associated to whatever contains the button, comboBox etc. So it triggers when you click in that area.
If you find one, add an ID and it will resolve the click problem.
I'm not 100% sure what the refreshId issue is, maybe the eventHandler in question is set refreshMode="partial" but not refreshId set, so it's trying to refresh the component containing the eventHandler, which is the one that doesn't have an ID. I could understand how that would cause a problem.
I'm writing a Primefaces 5.1 portlet.
It consists in a unique page containing a panelMenu, and I need that it starts with any panel collapsed everytime a user change page (on page loading).
But, if I open a panel, then change page, it will start showing that panel still opened.
I wasn't able to find any option to achieve this goal (e.g. collapsed=true, ignoreCookie=true or something similar).
The only solution I found was the following Javascript code:
PrimeFaces.widgets.myPanelMenu.collapseRootSubmenu(PrimeFaces.widgets.myPanelMenu.headers);
The problem is that this code will collapse any opened panel (so on page loading user is able to see panel menu collapsing animation) but it seems it doesn't store this state in its cookie/localstorage... the result is that on any page loading user can see this animation.
I'm sure it doesn't save its state, because the only way to "solve" the problem is to manually re-open and re-collapse the panels... then, on following page change, these menus start closed (and there is no animation).
I also tried to use PrimeFaces.widgets.sideMenuPanel.saveState() after collapsing, but with no success.
Do you have any idea about?
Thank you...
I found a solution to the problem.
If you read my discussion with Kukeltje (comments on my question), you will find that latest Primefaces' versions will solve the problem.
Otherwise, if you want to avoid upgrade or modify sources, and you need a quick fix based on Javascript only please read the following part of the answer.
It directly works on the component's state using JavaScript.
First of all you need to have a variable reference to your component:
<p:panelMenu model="#{menuBackingBean.menuModel}" widgetVar="sidePanelMenu" />
Then you should add the following JS code on document ready:
var panelMenu = PrimeFaces.widgets.sidePanelMenu;
// 1. On page loading collapses possible opened panels
panelMenu.collapseRootSubmenu(panelMenu.headers);
// following line is commented because it never should be necessary is not necessary (unless unexpected situation I never verified)
//clearSidePanelMenuPreferences();
// 2. Call the "clear preferences" actions on click on two tpe of links: first level are the panel link (used to open/close the menu) and second level are the destination links
// We need to fork also on the first level links to be sure it works after user clicks there then exit from the page in another way
panelMenu.headers.children("a").click(function(){setTimeout(clearSidePanelMenuPreferences, 500)}); // setTimeout is necessary because this event should be fired after preferences are written
panelMenu.headers.siblings().find("a").click(function(){clearSidePanelMenuPreferences();});
The function called to clear preferences are the following:
function clearSidePanelMenuPreferences() {
var panelMenu = PrimeFaces.widgets.sidePanelMenu;
panelMenu.expandedNodes = []; // clear the opened panels lists
panelMenu.saveState(); // store this information
}
Hope it helps
Please check this block of code
PF('myPanelMenu').headers.each(
function(){
var header = jQuery(this);
PF('myPanelMenu').collapseRootSubmenu(header);
header.removeClass('ui-state-hover');
}
);
I prefer to do this in order to execute this method only once and keep the menu option selected.
$(document).ready(function() {
if(location.pathname == "/cotizador/" || location.pathname == "/cotizador/faces/login.xhtml"){
var panelMenu = PrimeFaces.widgets.sidePanelMenu;
// 1. On page loading collapses possible opened panels
panelMenu.collapseRootSubmenu(panelMenu.headers);
panelMenu.expandedNodes = []; // clear the opened panels lists
panelMenu.saveState();
}
});
I'm new to Domino Designer. I'm trying to modify an existing application which is running on a remote server. I create a blank xPage and view in browser and it works. I add a label and view in browser and it works. I add a combo box and setup a data source for my xPage. The data source is in the current application and I'm using a view. I setup my combo to point to that data source and specify BindTo value. I view it in browser and I get Error 500 "HTTP Web Server: Command Not Handled Exception" I can open the view that I've used and see all the data in the view. I can even add, edit, and delete from the view.
Ideas... Thnxs in advance.
Additional Info. I've added a "View" from "Container Controls" and used the same data source and the same view and it also works in the browser.
The error being printed is:
javax.faces.el.PropertyNotFoundException: Error getting property 'CompanyName' from bean of type lotus.domino.local.View
com.sun.faces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:119)
com.ibm.xsp.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:144)
com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:182)
com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:163)
com.sun.faces.el.impl.ExpressionEvaluatorImpl.evaluate(ExpressionEvaluatorImpl.java:257)
com.sun.faces.el.ValueBindingImpl.getValue(ValueBindingImpl.java:150) ....
This was already answered in the comments, but I want to write a better answer.
The problem in this case is that a view data source is being used for editing a document. Directly, this is not a possibility, though there are a few great ways to get around this. The first way, and my favorite, is to use an inline form. I think the Extension Library Demo database offers a few great examples of how to go about doing this. One way is to use a tooltip dialog. Another way is an inline form. A repeater is used and for every row in the view, a hidden panel can be made which contains the document data source and all field which are required to be changeable. By clicking on a button or link, the panel is made visible. This is my favorite variant because it is simple, quick, and generally looks great.
Another way to go about this is to have a view data source only, but use scripts to retrieve the document and set the values in the background and then save and release. It all depends on what you are trying to achieve.
My main recommendation is to look at the ExtLib demo and take a look at what they are doing there.
This is a rather strange one I think, and I'm sure I made a mistake here myself:
in one of my applications I'm showing a fileDownload control bound to a Richtext field in my underlying NotesDocument. The control's properties a are set to Hide if no attachments, show size, type and created as well as allow delete. The control itself sits inside a custom control, being part of another custom control, similar to this:
Xpage.xsp
- ccContainer
- - ccInnerDoc
Document datasources for both the container and the "inner" doc are defined at the root of ccContainer and passed into the inner doc.
The inner doc's datasource is comnputed based on a document selection, and it's igenoreRequestParams property is set to false so that I can display the contents of the selected datasource in a given panel etc.
The selected doc is first opened in read mode, and I can set it to edit mode using a button.
Problem now is that my file download control always is showing the delete icon (trashcan) no matter which mode the doc is opened in. And it's not only the icon showing, it also pretends to work by asking me whether I really want to delete and then really removes the file attachment. Only that this change of course cannot be stored into the datasource because it's only open in read mode.
I'm sure that this behaviour is some side-effect of something else in my application (to a certain extent I rebuilt this in a plain new db and until now cannot reproduce it), but I'm at the end of my knowledge of what this could be.
Any hint of what could be causing this is more than welcome.
In place of #Frantisek Kossuth I answer this myself: see compute dynamically the allowDelete property of file download xpages
Thanks again, Frantisek!
Background: Xpage with multiple data sources. Each row of tabbed table contains an edit panel bound to a different data source than the main page. Each page contains a table to enter new documents. These documents are children of the main document. There is a view control that shows the user created documents immediately. The button in the table saves the document in addition to adding some control fields. It does a partial refresh of the editPanel.
Recently I added validation to the fields in the entry table. I use a function, and prevent updating from anything but the button. I am using Tommy Valand's method from this blog post: http://dontpanic82.blogspot.com/2010/03/xpages-making-validation-behave.html. If I don't use Tommy's method, then the validators fire when switching tabs, and are useless.
All of this works sort of, but I am experiencing the following issues.
1) I have to push the button twice to get the partial refresh to fire. Not only that, but the validation messages to not fire until the button is pushed twice. The first part was still an issue prior to adding the validation.
2) The table values do not clear after the refresh does happen. This used to work prior to adding the validation. The only way to get the values to clear now, is to do a full refresh (F5).
I really just need partial refresh to behave like it should. Any help is greatly appreciated.
I am answering my own question because I think that I might have found out why the partial refresh was acting so flaky. Here is what I did that solved my issues: Each tab had an editPanel. If I make the edit panel do a partial refresh to itself then the buttons on that panel seems to behave as you would expect them to.
When I create a new core control panel, the default in No submission. I do not know whether this issue manifests itself only when using multiple data sources and/or tabbed tables. Hopefully this fix will be of use to someone down the road. It is worth a try if you are having issues with partial refresh working correctly.