Working on a web site. A number of third party javascript libraries use mixed-case in their files and folders.
I am working on a windows system.
When ready to upload from my local windows XAMPP environment to my linux hosting, I use 7zip to create a zip file of my site. I use 7zip's -xr! feature to skip certain directories like my .git repository.
I FTP the resulting .zip file to my server and use the server's "unzip" function to explode it. All my files are there but they are all changed to lowercase!
This kills the website as the third party libraries that are mixed-case are no longer found.
I've tried unzip -C but that did not seem to do anything.
I also look in the archive prior to uploading and on windows, all the file name cases are preserved.
Tried using GNU32's windows tar but the --exclude function is not allowing me to skip the .git directories.
I need some help in the form of:
How to use unzip in linux such that is preserves case (googled until hairless, but no love found...)
How to use tar on windows such that it excludes particular directories
How to use something else to achieve my goal. I honestly don't care what it is... I'm downloading CYGWIN right now to see if it'll help at all. I may end up installing Linux in a virtual box just to try tar-gz from a virtual machine actually running linux but would REALLY rather avoid that hassle every time I want to pack up a pretty simple archive.
Zip works fine for packing, but unpacking is not kosher.
Use tar's --exclude-vcs option:
--exclude-vcs
exclude version control system directories
Example:
tar --exclude-vcs czf foo.tar.gz foo
or for a *.tar.bz2 archive
tar --exclude-vcs cjf foo.tar.bz2 foo
Try unzip -U file.zip; this might work if you have an old version of unzip. Otherwise, post the output of unzip -v and unzip -l file.zip.
Related
I need to get the content of archives and then I want to uncompress the selected one - but I dont want to uncompress the archives to know what's in it. I'd like to list and uncompress at least zip and rar, but (if that's possible) I don't want to be limited to only these two.
Can you advise good npm modules or other projects to achieve this?
Here's what I came up with:
zip
I found node-zip can only unzip files, but not list archive content.
rar
The best solution seems node-rar, but I can't install it on Windows.
node-uncompress This does what it says: It's an "Command-line wrapper for uncompressing various file types." So there is again no possibility to list archive content.
Currently I try to get node-uncompress to list files and hopefully it must never run cross-platform.
Solution:
I am now using 7zip with the node module node-7z instead of trying to get every archive working on its own. The corresponding site is: https://www.npmjs.com/package/node-7z
This library uses the OS independent archive manager 7zip. On Windows 7za is used. "7za.exe (a = alone) is a standalone version of 7-Zip". I've tested it on Windows and Ubuntu and it works great.
Update:
At Windows: Somehow I just got it working by adding 7za to the Path variables - not by adding 7za.exe to the "the same directory of your package.json file." like the description says.
Update 2:
On Windows 7za, that's referred in the node-7z post, cannot handle .rar-archives. So I'm using the "casual" 7-zip instead of 7za.exe. I just renamed the commanline 7z.exe to 7za.exe and added the 7-zip folder to the Path Variables.
I hope to pack the nodejs(includes its installed module via npm) and javascript code to one execute file for different plateform(windows, osx, linux).
Is it possible or any solution?
Your comment welcome
From my understanding, you can't really create an executable file for multiplatforms. Each platform has it's own packaging format to make it binary executable. What you can do is to create a x.tar.gz file and expand it to your target platform. I myself haven't done it but theoretically it's possible. Here is an example (assuming you're using GNU tar for all your platforms):
To pack it, do:
tar cvzf nodeproject.tar.gz nodeproject
To expand, do
tar xvzf nodeproject.tar.gz
I'm able to extract files from a RPM file, but how do I "rebuild" it, for example cpio2rpm?
I have extracted RPM file using following command.
rpm2cpio theFileName.rpm | cpio –idmv
I have to modify the few web application files like *.php, *.html or .js. These files don’t require any source recompilation. So I would like to replaces or change these files with modification without rebuilding rpm. Since, I need to do this for multiple platforms like Redhat Linux and SUSE, and multiple architecture like 32 and 64 bit OS.
I am expecting to do these changes on only on system and without rebuild rpm and there would not be have target system architecture dependency (like i386, 64).
I am not looking like command rpmbuild –rebuild the.src.rpm since, I don’t have source. I need to be rebuild binary .RPM file(not source .rpm)
I want to do this without source and platform or architecture independent and without using spec file if possible.
Any buddy, could you please suggest any solution or any free tools.
Thank you to all whoever spends time to read and reply to my thread.
You can use rpmrebuild to modify an actual rpm file (it doesn't need to be installed).
Most of the examples for this use complicated inline edit commands to modify known files in particular ways, but you can use a normal editor. I used this to fix a shell script in an rpm file that I didn't have the source for. Call the command as
rpmrebuild -ep theFileName.rpm
This puts you in an editor with the spec file for the RPM. The name of the file will be something like ~/.tmp/rpmrebuild.12839/work/spec.2. If you look in, in this example, ~/.tmp/rpmrebuild.12839/work, you will find all of the files used to make the RPM (in my case, the file was in root/usr/sbin within that directory). So, go to another window, cd to that directory, and edit any files you need to change.
When you have finished editing files, go back to the edit window with the spec file, make any changes you need to that file (I didn't have any, since I wasn't adding or deleting files), save the file, and say "y" to the "Do you want to continue" question. It will then build a new RPM file, and tell you where it has put it (in my case, in ~/rpmbuild/RPMS/x86_64/)
You can repackage an installed RPM (including modified files) using rpmrebuild. http://rpmrebuild.sourceforge.net/
Obviously your binaries (if any) would have to be platform/architecture independent to work on all the OS flavors you're hoping for, but it sounds like if they're just web files that shouldn't be a problem.
Principially you can pack everything you want into a RPM file. Just treat what you have as "source" and write a SPEC file which puts the data where the compiled binaries would normally go.
Concerning RPM, I consider "source" "what I have" and "binary" "what I need to run". Not very exact terminology, but it helps working with RPMs.
Your spec file looks like any other spec file, what concerns the parameters etc. But the code part is different:
[...]
%prep
# Here you either have nothing to do or you already unpack the cpio and possibly modify it.
# %build can be omitted
%install
[ "${buildroot}" != "/" ] && [ -d ${buildroot} ] && rm -rf ${buildroot};
# Here you can either unpack the cpio or copy the data unpacked in %prep.
# Be careful to put it into %{buildroot} or $RPM_BUILD_ROOT.
I made a perl script that creates a deb binary package from scratch.
I created the data, control, etc.
But when I run dpkg -i on my deb package it complains that it is unable to files from data.
Example:
unable to create '.dpkg-new'(while processing ''): No such file or directory.
I have downloaded some .deb packages to look at and they do not use the preinst script to create the directory structure.
I am thinking I am doing something wrong, I consider having to create my own directories in preinst but it does not seem right... perhaps I am missing something?
Do I have to create directories where my files from data will be copied in the preinst sh, or should dpkg do it and I am doing something wrong?
I had the same problem in a Ruby script I wrote.
I was generating a list of files to pass to tar when building the data.tar.gz archive. When I ungzip and untared the archive manually it would deflate fine, but dpkg would fail.
It turns out that the list of files must also include each directory to create as well.
Note that when I created data.tar.gz I built it with nearly the same options as dpkg-deb/build.c does in the dpkg-1.15.8.11 source.
execlp(TAR, "tar", "-cf", "-", "--format=gnu", "--null", "-T", "-", "--no-recursion", NULL);
Instead I used
IO.popen("gnutar -czf - --format=gnu -T - --no-recursion", "r+")
In addition to what #Arrowmaster said, check the http://www.debian.org/doc/debian-policy/ for some detailed explanation of the files. After you build the package itself, you can check it with lintian tool to see if there is anything obvious you might have missed.
If any one looks for a solution to the problem:
"Build a deb package from an rpm spec file."
Look here http://www.deepnet.cx/debbuild/
I have made my own perl build script much simple then the mentioned one so I can easily maintain it.
Some useful knowledge gained in the process:
0. the deb is an ar archive that contains 3 files, the order of the files is important.
1. the scripts from control.tar.gz must be made executable.
2. it is good to have a preinstall script to make directories if dirs do not exist.
3. sometimes dpkg decides to unzip your zips (this happened if the zip was the only file in the data.tar.gz) so check for that in an postinstall script.
4. when you tar.gz some files be sure to chmod to the dir that contains the directory structure for your tar.
You should not attempt to manually create a .deb binary package by hand. The Debian New Maintainers' Guide covers how to get started creating a Debian package using the correct tools.
Your hand created package may look correct to you but because it is not installing it is obviously flawed in either a minor way that you have not noticed or in a more serious way that is not visible to you (for example most people don't realize a .deb is actually an ar archive).
There are lots of reasons for this. You really need to run:
dpkg -i -D1110 mydeb.deb
And post the result to have any hope of someone being able to solve the problem.
I basically want rsync, but don't have the luxury of being able to install it.
But I need a way to deploy files from one server to another. I edit one or more files on one server and then need to copy all modified files to another server by comparing files that aren't the same (and being able to exclude .htaccess files)
Does anyone know of an easy way to do this?
Thanks,
Scott
(I will assume that you have shell access to both servers)
You do not need to install rsync system-wide. You can install it in your home-directory. First get a copy of the rsync binary for your distribution:
You can extract it from the rsync RPM package using rpm2cpio and cpio
You can copy it from another RedHat installation
You can copy it from another Linux installation for the same platform - there is a string possibility that it will work fine
Then you need to permanently modify the PATH environment variable so that the rsync command is found by your shell. If you do that for your user accounts in both servers, you can use rsync normally without the need for root privileges.
If you have access to install rsync on one server, that's all you need minimum.
If not, the question is what tools do you currently have available? scp? sftp? ftp? ssh? telnet? find?