I'm using Raphael to draw rectangles. Whoo-hoo!
Is there a way to right align contents of an SVG file?
Not just text, but shapes as well?
I can do the math and get the computed x value, but I'm looking for the lazy-simple solution.
Thank you.
There isn't. Unlike normal web pages where the window is resized and the content flows into it, when a Raphael paper is resized, there is no sort of flow, so aligning is irrelevant. Instead of setting align=right, you just set the right edge to be the same position you set the width of the paper to be. If you enlarge the paper, you can scale the contents with a single operation. Once you've set the position of the right edge, you've essentially set the align position. You don't need to re-set all edge values when the paper changes size, you just scale everything with one command. Hope that helps
Related
Is it possible to have the vtkAxesActor small in a corner of the window?
Here is a image of what I currently got and what I would like to have. The colorful axes are the standard axesActor. But I would like the axes in a corner of the window and only there (bottom left in black). They shouldn't move around the window when the view is rotated. Only around their origin.
Is this possible? And if yes, how?
A possible solution is to put the vtkAxesActor into an orientation widget:
widget = vtk.vtkOrientationMarkerWidget()
widget.SetOrientationMarker(axisActor)
widget.SetInteractor(interactor)
widget.SetViewport(0, 0, size, size)
widget.InteractiveOff()
widget.EnabledOn()
The vtkAxesActor location is functional and it's location has a purpose. The anchor point of the AxesActor is the anchor point of the model. This provides context of where any transformations or translations would be calculated from.
Unfortunately the example of the axisActor in the corner you have proposed would only provide context of the orientation of the model and so not part of the standard options.
In a webpage created with node/webpack, vega-lite, and vegaEmbed, I have a layer with rect marks with short annotations inside them using text marks. I'd like to clip the text to its surrounding rect but haven't figured out a way to do this and hope someone can point me in the right direction.
I realize text has a limit property in pixel units. If I could determine the pixel units of my rect marks (I don't know how to do this), using limit seems like a reasonable approach.
Also, if I knew the pixel extents of my rectangle, I can then write code to align the text within the rect which would be desirable. Currently I just use the same x as the rect, with a dx offset.
I've read about background for text which is a similar problem, but not the same.
By default, the anchor for the text element in SVG is at the bottom left, but I want it to be at the top left, since I am also creating a rectangle to act as the background for the text, but it is displayed incorrectly since the text is higher than the rectangle (because rectangle anchor/offset is at the top left). Is there a way to fix this, so both text and rectangle can be drawn at same coordinates and be displayed in the same location.
The dominant-baseline property/attribute worked for me:
svg {
dominant-baseline: hanging;
}
The coordinates (x and y) you supply for text elements is used as the baseline of the text. This makes sense because if there is text with varying font sizes on the same line, you would want their baselines to line up.
There is no "automatic" way to do what you want. SVG elements are always absolutely positioned.
You will just have to move the text down a bit by making the y coordinate a bit larger.
Alternatively, you could add a dy attribute to shift the text down a bit. Or even use a transform attribute to do the same. But using either of those methods wouldn't really be simplifying the process for you.
I have a multiviewport OpenGL modeler application. It has three different viewports : perspective, front and top. Now I want to paint a label for each viewport and not succeeding in doing it.
What is the best way to print a label for each different perspective?
EDITED : The result
Here is the result of my attempt:
I don't understand why the perspective viewport label got scrambled like that. And, Actually I want to draw it in the upper left corner. How do I accomplished this, because I think it want 3D coordinate... is that right? Here is my code of drawing the label
glColor3f(1,0,0);
glDisable(GL_DEPTH_TEST);
glDepthMask(GL_FALSE);
glRasterPos2f(0,0);
glPushAttrib(GL_LIST_BIT); // Pushes The Display List Bits
glListBase(base - 32); // Sets The Base Character to 32
glCallLists(strlen("Perspective"), GL_UNSIGNED_BYTE, "Perspective"); // Draws The Display List Textstrlen(label)
glPopAttrib();
I use the code from here http://nehe.gamedev.net/data/lessons/lesson.asp?lesson=13
thanks
For each viewport switch into a projection that allows you to supply "viewport space" coordinates, disable depth testing (glDisable(GL_DEPTH_TEST)) and depth writes (glDepthMask(GL_FALSE)) and draw the text using one of the methods used to draw text in OpenGL (texture mapped fonts, rendering the full text into a texture drawing that one, draw glyphs as actual geometry).
Along with #datenwolf's excellent answer, I'd add just one bit of advice: rather than drawing the label in the viewport, it's usually easier (and often looks better) to draw the label just outside the viewport. This avoids the label covering anything in the viewport, and makes it easy to get nice, cleanly anti-aliased text (which you can normally do in OpenGL as well, but it's more difficult).
If you decide you need to draw the text inside the viewport anyway, I'll add just one minor detail to what #datenwolf said: since you generally do want your text anti-aliased (even if the rest of the picture isn't) you generally want to draw the label after all the other geometry of the picture itself. If you haven't turned on anti-aliasing otherwise, you generally will want to turn it on for drawing the text.
This question already has answers here:
How can I cut one shape inside another?
(4 answers)
Closed 6 years ago.
So basically as my title says, I want to "cut a hole" in a rect element.
I have two rect elements, one on top of the other. The one on the bottom has a fill colour of white, and the one on the top has a fill colour of grey.
What I want to do is cut a triangle out of the top rect element so that the rect element below shows through.
This svg element is going to be used as an audio button for a media player on a page. In other words, you'll be able to click (or drag) your mouse left/right and the change in audio level will be represented by a change in the width of the rect element on the bottom, which shows through the triangle cut out of the top rect element.
I hope that's not too confusing. :P
Here is a quick mockup of what it should look like: http://forboden.com/coding/s1.png
Here is my code: http://forboden.com/coding/svgClipTest.html
Where am I going wrong here?
You should be able to use the fill-rule: evenodd(default) property to achieve this effect, if you want to prevent the fill of the rectangle from painting where the circle is. See this example from the SVG specification:
The key point is draw outer shape and inner shapes(holes) in different direction (clockwise vs anti-clockwise).
Draw the outer shape clockwise and draw the inner(holes) shapes anti-clockwise.
Or conversely, draw the outer shape(holes) anti-clockwise and draw the inner shapes clockwise.
Concat the path datas of outer shape and inner shapes(holes).
You can cut more holes by concat more hole path data.
This image explain how to cut a hole:
I see that you have it solved already, just wanted to add that if you want something more advanced then it's often quite easy to use a <mask>, see http://dev.w3.org/SVG/profiles/1.1F2/test/svg/masking-path-11-b.svg for example.
However, if you can avoid masking and clipping (e.g by just drawing things on top) that usually leads to better performance/user-experience.
Easiest way is to use <path> with the hole, and set pointer-events to none so events can pass through to the <rect> under. Of course there are many other ways to handle events such as wrapping them with a <g> and handling events on it.
You don't need to limit yourself to the basic shapes and use complicated clipping. Make things felxible enough so you can copy&paste path data generated by tools like inkscape.