I would like to use a VLOOKUP function referring to a data table placed in a different sheet from the one where the VLOOKUP function in written.
Example: in Sheet 1, cell AA3 I would like to insert the VLOOKUP function.
I want the function to check the number in cell M3, find the same number in Sheet 2 range address A2:Q47 first column, and reproduce the value in the 13th column of that table.
I've written this function but it reports #N/A as a result:
=VLOOKUP(M3,Sheet1!$A$2:$Q$47,13,FALSE)
One of the common problems with VLOOKUP is "data mismatch" where #N/A is returned because a numeric lookup value doesn't match a text-formatted value in the VLOOKUP table (or vice versa)
Does either of these versions work?
=VLOOKUP(M3&"",Sheet1!$A$2:$Q$47,13,FALSE)
or
=VLOOKUP(M3+0,Sheet1!$A$2:$Q$47,13,FALSE)
The former converts a numeric lookup value to text (assuming that lookup table 1st column contains numbers formatted as text). The latter does the reverse, changing a text-formatted lookup value to a number.
Depending on which one works (assuming one does) then you may want to permanently change the format of your data so that the standard VLOOKUP will work
I faced this problem and when i started searching the important point i found is, the value u are looking up i.e M3 column should be present in the first column of the table u want to search
https://support.office.com/en-us/article/VLOOKUP-function-0bbc8083-26fe-4963-8ab8-93a18ad188a1
check in lookup_value
Your formula looks fine. Maybe the value you are looking for is not in the first column of the second table?
If the second sheet is in another workbook, you need to add a Workbook reference to your formula:
=VLOOKUP(M3,[Book1]Sheet1!$A$2:$Q$47,13,FALSE)
There might be something wrong with your formula if you are looking from another sheet maybe you have to change Sheet1 to Sheet2 ---> =VLOOKUP(M3,Sheet2!$A$2:$Q$47,13,FALSE) --- Where Sheet2 is your table array
This lookup only features exact matches. If you have an extra space in one of the columns or something similar it will not recognize it.
I have faced similar problem and it was returning #N/A. That means matching data is present but you might having extra space in the M3 column record, that may prevent it from getting exact value. Because you have set last parameter as FALSE, it is looking for "exact match".
This formula is correct: =VLOOKUP(M3,Sheet1!$A$2:$Q$47,13,FALSE)
Copy =VLOOKUP(M3,A$2:Q$47,13,FALSE) to other sheets, then search for ! replace by !$, search for : replace by :$ one time for all sheets
Related
I can't figure out a function that would automatically copy the first row value if the value on another rows matches 1. I would need the red dates to be automated.
Any advice would be very appreciated, thank you!
Excel problem
You can do it with
=INDIRECT(ADDRESS(1; MATCH(1;E2:ZZ2)+4))
The inner MATCH searched for "1" in the given array (from E2 to ZZ2). The "+4" is there, because you are beginning to search in column E (=5) and MATCH returns the column within your array.
The ADDRESS takes the first row and the column found by MATCH.
The INDIRECT returns the value of the given ADDRESS.
If you copy this formula down the rows, the search array (E2:ZZ2) is automatically adjusted to search the corresponding row.
=INDEX($E$1:$O$1;1;MATCH(1;E2:O2;0))
Replace semicolon with comma if your Excel version needs it.
If you have, you can also use Xlookup, it's a bit easier.
=XLOOKUP(1;E2:O2;$E$1:$O$1;"not found")
I have below data where I need to get the most frequent text in column A based on column B,
Data Set:
I used the below code but it returns #N/A as I think it's possibly due to empty cells
=INDEX($A$1:$A$11,MODE(IF($B$1:$B$11=3, MATCH($A$1:$A$11,$A$1:$A$11,0))))
Expected Result: "RED"
How to get the most frequent text ignoring blank cells and based on another column value?
You can add another IF() to check and ignore blank cells.
=INDEX($A$1:$A$10,MODE(IF($B$1:$B$10=3, IF(A1:A10<>"",MATCH($A$1:$A$10,$A$1:$A$10,0),""))))
You may need array entry with CTRL+SHIFT+ENTER for non 365 version of excel.
With Excel365 can use
=#SORTBY(A1:A10,COUNTIF(A1:A10,A1:A10),-1)
I got the answer but it seems little lengthy..
I have a spreadsheet that I'm importing data into. I need to find the value within a column that is closest to zero. The column contains both positive and negative values, and the value closest to zero will be used in another formula. I've found an answer using an array formula, but it will only work for a fixed range (e.g. K2:K10), and the number of records imported into my sheet will vary each time I use it.
Here's what I have so far:
=INDEX(K:K,MATCH(MIN(ABS(K:K)),ABS(K:K),0))
Is there a way to apply an array formula over an entire column and just include non-zero cells other than the column title? Or possibly just cells with numerical values? Or is it possible to control the range that it applies to?
We can dynamically find the last cell in the range by using another INDEX/MATCH formula that is not an array:
=INDEX(K:K,MATCH(1E+99,K:K))
This will find the last cell that has a number in column K.
So we now use this as the last cell in the range:
=INDEX($K$2:INDEX(K:K,MATCH(1E+99,K:K)),MATCH(MIN(ABS($K$2:INDEX(K:K,MATCH(1E+99,K:K)))),ABS($K$2:INDEX(K:K,MATCH(1E+99,K:K))),0))
And now the formula is dynamic.
This formula is still an array formula and must be confirmed with Ctrl-Shift-Enter when exiting edit mode. If done correctly then Excel will put{} around the formula.
If as you pointed out there is a chance of deleting row 2 then all the K2 references will also be deleted.
In place of K2 we can use INDEX(K:K,2) It will now always look at the second row and will not error when row 2 is erased. So use this instead:
=INDEX(INDEX(K:K,2):INDEX(K:K,MATCH(1E+99,K:K)),MATCH(MIN(ABS(INDEX(K:K,2):INDEX(K:K,MATCH(1E+99,K:K)))),ABS(INDEX(K:K,2):INDEX(K:K,MATCH(1E+99,K:K))),0))
There is nothing wrong with the Offset() function in small amounts, but it is a volatile function. Which means that it will calculate EVERY TIME excel calculate whether the data to which it is dependent has changed or not.
For the benefit of anyone reading this post, I ran into another issue and found a way around it. Scott Craner's answer above worked well until I ran a macro that I had for that sheet, which would delete certain rows. If row 2 got deleted, the formula would give a #REF error, because it was trying to call $K$2.
My solution was to replace $K$2 with
OFFSET(K1,1,0)
Therefore, the complete formula would be:
=INDEX(OFFSET(K1,1,0):INDEX(K:K,MATCH(1E+99,K:K)),MATCH(MIN(ABS(OFFSET(K1,1,0):INDEX(K:K,MATCH(1E+99,K:K)))),ABS(OFFSET(K1,1,0):INDEX(K:K,MATCH(1E+99,K:K))),0))
And as Scott mentioned, remember to hit Ctrl-Shift-Enter to execute the array formula.
I used this VLookup formula to retrieve value from another sheet Sheet2 which contains a table with two columns NumEchelon, Indice:
=RECHERCHEV("1/1";Sheet2[NumEchelon];Sheet2[Indice];faux)
But it doesn't return any value, when i click on the cell i found just the formula not the value i want to retrieve from the sheet Sheet2.
Looks like you are using french version of Excel, so I will leave it up to you to find the translated commands. The basic problem from what I am gathering is you are looking up "1/1" in the named range NumEchelon. I am going to guess that this named range is 1 column wide. sheet2[Indice] is a separate chunk of data.
Vloopkup is supposed to search for a specified term in a table (usually 2 or more columns wide located to the right of the search column) and return a value in the same row as the found value in a specified column. The columns are numbered left to right with the first column being zero. The false or FAUX at the end tells it you want an exact match.
So without seeing your data I would say make sure that NumEchelon covers both columns of information, and INDICE column is to the right of NumEchelon. Where you have Sheet2 Indice replace with with a numeric value for the column its from the table you made for the vlookup.
So Assuming NumEchelon is A1:A8 and Indice is B1:B8 I would do the following:
Use a new named range "MonTableaux" and define it as sheet2!A1:B8
=VLOOKUP("1/1",MonTableaux,2,0)
Without the named range it would look like
=VLOOKUP("1/1",sheet2!$A$1:$B$8,2,0)
'note the 0 is the same as false
Now you may be using TABLES and I am not all that familiar with table so there may be short cuts. If that is the case someone point it out to me and I will delete my answer.
If your information you want to return in not lined up vertically with the information you are searching for or if the information you want to return is located to the left of what you are searching for you will want to use a combination of INDEX and MATCH. maybe something like this:
=INDEX(sheet2[Indice],match("1/1",sheet2[NumEchelon],0))
If the formula is showing up in the cell, and not a result like #N/A then the cell is likely formatted as Text, change it to General and click in the formula bar and hit enter again to show the formula result instead of the formula text.
I know there's several posts about this, here and other places, but I seem to get errors no matter which method I try.
I'm trying to fill an adjacent cell with a value based on the corresponding value from a list of values. For example, there's a list of Test -> Action pairs, defined in two columns. In another cell, I want to type in a value which exists in column B, and then fill the adjacent cell with the corresponding value in column A.
Here's my Sheet.
The columns "Actions" and "Tests (test groups)" define the corresponding values.
I'm using VLOOKUP in the "Test (test grop)" column (below the first two columns, from row 10 and down), to fill the cells when I'm entering a value in the "Action" value. Simple enough.
However, now I need this exact functionality in another sheet. I need to move the "Action" and "Test (test group)" columns - row 10 and down - to another sheet, and still reference the values in this sheet (row 2 - 6).
I've tried INDIRECT and a couple of other alternatives, and all give me either "#REF" or "#VALUE" in the cell where I use VLOOKUP.
Anyone able to explain how to do this, related to this example?
You need to add the worksheet name to your formula. Use single quotes if you have spaces or special characters in the name. Like this:
=VLOOKUP(A1,'sheet-name-with-dash'!$A$1:$B$9,2,FALSE)
may seem out of place, but whenever I see this kind of problems (in defining and using ranges) I think of the Excel option to define those ranges (like in Ctrl+F3, Name Manager).Showcase:
select your area: in your case A2:B6,
hit: Ctrl+F3,
name the range: i.e. LookupRange
use that range in Vlookup formula like: Vlookup($A12,LookupRange,2,0)
I do not use this on regular basis,but might get handy in a workbook with many sheets, ranges, formulas. Try this for fun at least.
Hope it helps.