I am getting warnings at the end of my VS2012Pro install that I do not understand and was wondering if anyone else had the same issue or knew of a reason/fix. I receive 2 warnings that are almost identical:
Microsoft Visual Studio Preparation
The system cannot find the file specified.
and
Microsoft Visual Studio 2012 Preparation
The system cannot find the file specified.
I'm installing from an ISO. I've tried mounting with Virtual Clone Drive and just extracting the files with 7-Zip and using the exe. Both scenarios give the warnings.
Any advice? Thanks.
Related
I have installed VS2013 and VS2015 on Windows 7.
I have an existing C++ Dll project that was building fine but now all of a sudden it wont build using VS2015 and gives me the error:
LINK : fatal error LNK1104: cannot open file 'kernel32.lib'
From this post: fatal error LNK1104: cannot open file 'kernel32.lib' I went looking for the kernel32.lib file and it is located here:
C:\Program Files (x86)\Windows Kits\8.1\Lib\winv6.3\um\x86
When I go to my Projects Properties-->Linker-->Input and select Macros I see that this path is indeed there:
My Platform Toolset is set to Visual Studio 2013 - Windows XP (v120_xp) which is what it always has been set to.
Why has my Project all of a sudden stopped building? What could have gone wrong?
I had this similar problem today with Visual Studio 2013 when I changed my VC++ Directories:
Project->Properties->VC++ Directories:
Include Directories
If the cause is some plug-in/extension that changes your props files, it may in consequence change the "Visual C++ Directories" settings of your project.
So, the solution that worked for me is described on my own answer Can't compile 64 bits Visual Studio 2010 projects, which I fully transcribe to here:
After I asked a colleague for help, we noticed, that even getting
clean builds of the projects from TFS, with overwrite option, the
Project's Configuration Properties > VC++ Directories on my computer
were always different from other computers.
Searching more we found the solution on the last post of Reset
include/lib path, which I will fully transcribe:
use "del %HOMEPATH%\AppData\Local\Microsoft\MSBuild\v4.0\Microsoft.Cpp.Win32.user.props"
is not always the right way.
Better use "del %USERPROFILE%\AppData\Local\Microsoft\MSBuild\v4.0\Microsoft.Cpp.Win32.user.props"
where the application data folder is normally placed in.
Then I've looked inside the contents of Microsoft.Cpp.x64.user.props
and I've seen that there were things added by Visual Leaks Detector.
Which is reasonable, as one month before, I did a memory leak analysis
using VLD.
So, I deleted the file and now everything compiles fine at 64bits!
I had to install the Visual C++ for Desktop Development.
Open Visual Studio Installer and go to Installed tab. Click on the Change Button on your installed Visual Studio Community Edition. -> On the Workloads Tab there should be a option Desktop Development with C++. Activate that option and modify the changes.
Afterwards it was working for me.
I had the same problem today. As it turned out somehow the SDK 10.0.15063.0 got installed on my system but without the Desktop C++ files. Selecting the SDK in the list of installed programs, doing a change install and there selecting the Desktop C++ options added the necessary files and now I can link again.
I got this error fatal error lnk1104: cannot open file 'kernel32.lib'.
this error is getting because there is no path in VC++ directories.
To solve this probelem
open visual studio 2008
go to Tools-options-Projects and Solutions-VC++ directories-*
then at right corner select Library files
here you need to add path of kernel132.lib
In my case It is C:\Program Files\Microsoft SDKs\Windows\v6.0A\Lib
Thank you.
I had this following upgrade of some projects from VS2013 to VS2017.
Original project had a manual modification to the "Library Directories" item under VC++ Directories in the project settings.
This meant it did not pick up changes from the upgrade.
Using the option will reset this to something that works (assuming the SDK is installed OK) provided anything other than the default is not needed of course. In my case it was trying to point at the v7.1 SDK but that was not installed for vs2017.
in vs 2019, just run the installer, click modify, and then in the individual components tab, remove windows 10 SDK. then again run the installer and add windows 10 sdk!
I had this similar problem today with Visual Studio 2017. My cause turned out to be a bad environment setting in NETFXSDKDir, specifically:
NETFXSDKDir=C:\Program Files (x86)\Windows Kits\NETFXSDK\4.6.1
It needed to have a value of:
C:\Program Files (x86)\Windows Kits\10\Lib\10.0.10240.0\um\x86
I have a more detailed response here:
fatal error LNK1104: cannot open file 'kernel32.lib'
In VS 2022 I was trying to compile an old solution that originally ran in VS 2010 then in VS 2019. It continually gave me the "cannot find Kernel32.lib" error. I spent 8 hours trying everything, including everything on this page. What worked for me: Configuration Properties -> VC++ Directories -> Library Directories and "inherit from parent" (guessing this sets to defaults) fixed this for me. Also note: I'm using winsock and directinput.
I want to take some of MSDN help files offline on a windows machine which does not have visual studio installed on it. the problem is that I cannot find a way to get and install Help Library manager and Help viewer without installing the visual studio or sql server.
How can I install them without installing the visual studio or sql server?
I just wrote an answer on how to do this for an older question, which can be found here.
For convenience, here are the essential steps to get Help Viewer 2.2 to run without going to the trouble of installing a complete copy of Visual Studio 2015:
Most of the files required by HlpViewer.exe can be found on the Visual Studio DVD in two different MSI packages. By passing some additional command line arguments to msiexec, it's quite easy to install them manually:
msiexec.exe /i help3_vs_net.msi VS_SETUP=1
msiexec.exe /i vs_minshellcore.msi MSIFASTINSTALL="7" VSEXTUI="1"
While this installs most necessary files, it doesn't account for all of them ... to keep things simple, I copied the rest of them from a working installation on another computer:
C:\ProgramData\Microsoft\HelpLibrary2
Essentially only contains a CatalogType.xml and some empty directories.
C:\Program Files (x86)\Microsoft Help Viewer\v2.2\CatalogInfo\VS11_en-us.cab
Moreover, it's necessary to provide the application with a valid ContentStore path by importing the following .reg file:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Help\v2.2\Catalogs\VisualStudio14]
"LocationPath"="%ProgramData%\\Microsoft\\HelpLibrary2\\Catalogs\\VisualStudio14\\"
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Help\v2.2\Catalogs\VisualStudio14\en-US]
"SeedFilePath"="C:\\Program Files (x86)\\Microsoft Help Viewer\\v2.2\\CatalogInfo\\VS11_en-us.cab"
"catalogName"="Visual Studio Documentation"
Finally, I created a new Application Shortcut and changed its Target: to read as follows:
"C:\Program Files (x86)\Microsoft Help Viewer\v2.2\HlpViewer.exe" /catalogName VisualStudio14 /launchingApp Microsoft,VisualStudio,14
Et voilà!, with that HlpViewer.exe should finally execute without any problems!
In MSDN to USB v2.5, you don't have to have any Visual Studio IDE installed:
https://stackoverflow.com/a/66595500/3268088
I know its old question. I just run into a problem involving Help Viewer.
my recovery steps are :
get sqlexress installer (if you haven't got one)
after extracting the files, check its folder and find for "help" folder
I got mine "SQLEXPRWT_x64_ENU\redist\VisualStudioShell\Help\x64"
run install.exe with administration priveleges (Run as Administrator)
all done.
I am using Windows 8 64 bit machine with VS 2012 ultimate. After installing Update 3 and restarting the machine, I get following error whenever I try to open VS.
---------------------------
devenv.exe - System Error
---------------------------
The program can't start because MSVCR110.dll is missing from your computer. Try reinstalling the program to fix this problem.
---------------------------
OK
---------------------------
The said file is already present in C:\Windows\System32 folder. Please let me know what can be done here..don't want to reinstall that monster again.
You need to check where your projects are being loaded. I have VS installs under both x86 and 64. You'll need downloads for both on a 64 bit operating system.
http://www.microsoft.com/en-us/download/details.aspx?id=14632
http://www.microsoft.com/en-us/download/details.aspx?id=30679
Please see:
http://social.msdn.microsoft.com/Forums/vstudio/en-US/d081943f-fbe8-4a28-b8c0-d83ded9b1a67/msvcr100dll-missing
Some basic tips:
Ensure you have run the install with Administrator rights.
VS won't always ask for a computer restart. However, reboot your computer.
A note about this update.
Note Visual Studio and Team Foundation Server (TFS) installation
mechanics are different. The Visual Studio update installs on top of
whatever is already installed on the computer. The TFS update is a
full layout that replaces whatever is installed on the computer.
Before you try to apply the TFS update, make sure that you have a full
backup of your current databases. If the TFS update installation
fails, you will be unable to restart the update or roll back to the
earlier version of TFS without performing a restore procedure.
http://support.microsoft.com/kb/2835600
If you get this error it means you don't have Microsoft Visual C++ Redistributable 2012 Update 3.Try to download it from http://www.microsoft.com/en-us/download/details.aspx?id=30679 .Hope this helps.
Since it is a 64bit system, copying the missing file to the C:\Windows\SysWOW64 folder should solve your problem. If it keeps failing for other dll just keep copying.
With same error (MSVCR110.dll not found) really reinstalled Microsoft Visual C++ Redistributable 2012 not solved all problems. Some VS tools report - not found msvcr110_clr0400.dll. After repair installation of .net 4.0 (or 4.5/4.5.1) all work fine.
I just installed visual studio 2012 and tried running my C++ project on it.
compilation fails due to missing "SDKDDKVer.h", "windows.h", etc.
I installed the windows 8 sdk from Windows Software Development Kit (SDK) for Windows 8, but after successfully running the installer with the default components (including the windows headers), I can't find any include folder under C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0 or C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A.
I ran the SDK installer twice + tried to repair and still I can't find any trace of the windows header files.
Did anyone encounter something similar?
what am I missing? my OS is win7 x64. I uninstalled VS2010 before installing VS2012.
thanks,
It's a bug caused by VS2012 using the configuration of VS2010.
You have to manually fix the include libraries to get around this (through the property manager).
The substantial modifications needed are :
adding $(WindowsSDK_IncludePath) to the include paths
adding $(WindowsSDK_LibraryPath_x86) or $(WindowsSDK_LibraryPath_x64)
to the library path depending if your building for x84 or x64.
The same problem also exists when you upgrade a VS2010 project to VS2012.
To me, manually fixing the include dirs (see step 1 in previous answer) took care of the problem.
When I try building just a simple program into VS2010, compiling succeeds yet when I try to build the solution it gives me this error:
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
What am I doing wrong?
I had this issue and I solved it with this thread
disable incremental linking, by going to
Project Properties
-> Configuration Properties
-> Linker (General)
-> Enable Incremental Linking -> "No (/INCREMENTAL:NO)"
This issue occurred after Visual Studio 2012 installation.
The issue resolved by replacing the cvtres.exe from VS2010 with the one from VS2012.
Thank you to "social.msdn"!
I had this issue after installing dotnetframework4.5.
Open path below:
"C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin" ( in 64 bits machine)
or
"C:\Program Files\Microsoft Visual Studio 10.0\VC\bin" (in 32 bits machine)
In this path find file cvtres.exe and rename it to cvtres1.exe then compile your project again.
Had to install VS 2010 SP1 in order to get it to work again for myself. Lame microsoft.
Do you have Visual Studio 2012 installed as well? If so, 2012 stomps your 2010 IDE, possibly because of compatibility issues with .NET 4.5 and .NET 4.0.
See http://social.msdn.microsoft.com/Forums/da-DK/vssetup/thread/d10adba0-e082-494a-bb16-2bfc039faa80
I am using Visual Studio 2010.
This happened to me when I installed .NET 4.5.
Uninstall of .NET 4.5 and install of .NET 4.0 helped me and error messages disappeared.
If you have installed VS2012 as well, the old cvtres file will no longer work.
Try removing the file (I simply renamed):
C:\Program Files
(x86)\Microsoft Visual Studio 10.0\VC\BIN\cvtres.exe
You can also debug using the /VERBOSE linker option in order to get more information regarding the linker error. There you should see an error message that the invoke to cvtres fails.
In my case it was just caused because there was not enough space on the disk for cvtres.exe to write the files it had to.
The error was preceded by this line
CVTRES : fatal error CVT1106: cannot write to file