I'm new with node and compound. While i tried to scaffold
compound g crud leaveApplication leave_code:string description:string applicable:string carry_forward:boolean limit_type:boolean lop:boolean od:boolean co:boolean leave_revision:boolean active:boolean
I was getting some errors, then i tried
compound g crud leave code:string description:string applicable:string cForward:boolean limit:boolean lop:boolean od:boolean co:boolean leave_revision:boolean active:boolean
But the error now occurred was in the name of routes
leaves GET /leaves.:format? leaves#index
leaves POST /leaves.:format? leaves#create
new_leafe GET /leaves/new.:format? leaves#new
edit_leafe GET /leaves/:id/edit.:format? leaves#edit
leafe DELETE /leaves/:id.:format? leaves#destroy
leafe PUT /leaves/:id.:format? leaves#update
leafe GET /leaves/:id.:format? leaves#show
These were the routes i was getting.
Why is that so?
it looks like compound is turning your model name into plural (=leaves) and then, instead of using your provided singular name, turning this plural name back, resulting in "leaf".
Does this make any sense? ;-) Or did I get you question wrong?
If you could provide the "some errors" and the full error message, it would be easier to help ;)
Btw, I just experienced that using camel case for models doesn't seem to be a good idea with compound.js.
It's mangeling the camelcase in some places (e.g. inside the controllers), but in others not (schema.js) creating a application with some errors...
Related
today when I try to run my Strapi with some exercises, there was an error showing that inversedBy attribute flight not found target api::airport.airport. However, the command shows Admin UI was built successfully. but I cannot access the Admin panel and do anything with it. It seems that the error is belonging to one of the content, but the entire API is not working. What should I do? Does anyone know how to fix this bug?
enter image description here
Thank you.
Firstly, I tried to run the start command(npm run develop) for several time, it keep reporting same error.
Secondly, I tried to access the administration panel directly, it is apparently that I failed.
Hopes someone can help me to figure out, how can I solve this bug/error.
I had a similar error.
The issue for me related to a problem where the 'key'(i.e. attribute key in JSON) didn't match that was referenced by the model in the mappedBy & inversedBy.
e.g. mappedBy:"f_light" should point to
"f_light":{type:"relation",...) --
At least that was the problem for me
Strapi Docs on how the schema is supposed to look
My issue: Error on attribute a_token in model a-request(api::a-request.a-request): inversedBy attribute a-requests not found target api::a-token.a-token
This occurred because I inversedBy:'a-token' when the attribute key was 'a_token'. Changing them so they matched solved my issue ('a-token' -> 'a_token').
The naming conventions of mappedBy, inversedBy, and the attribute keys MUST use '_' instead of '-' for spaces, otherwise it will fail the naming convention tests.
I use jooq to generate objects against a local database, but when running "for real" later in production the actual databases will have different names. To remedy this I use the <outputSchemaToDefault>true</outputSchemaToDefault> config option (maven).
At the same time, we have multiple databases (schemas), and are using a connection pool to the server like "jdbc:mysql://localhost:3306/" (without specifying a database here).
How do I tell jooq which database to use when running queries?
I have tried all config I can think of:
new Settings()
.withRenderSchema(true) // true/false seems to make no difference.
.withRenderCatalog(true) // true/false seems to make no difference.
.withRenderMapping(new RenderMapping()
.withDefaultSchema("my_database") // Seems to have no effect.
// The above 3 configs always give me an error saying "no database selected".
// Adding this gives me 'my_database.my_table' does not exist - while it actually does.
.withSchemata(new MappedSchema()
.withInputExpression(Pattern.compile(".*"))
.withOutput("my_database")
));
I have also tried using a database/schema name, as in not configuring outputSchemaToDefault. But then, adding the MappedSchema code above, but that gives me errors with "'my_databasemy_database.my_table' does not exist", which is correct. I have no clue why that code gives me the database/schema name twice?
Edit:
When jooq tells me that the db.table does not exist, if I put a break point in a good place and get the sql from jooq and run exactly that against my database it does work. But jooq fails to run it.
Also, I'm using version 3.15.3 of jooq.
I solved it. Instead of using .withInputExpression(Pattern.compile(".*")), it seems to work with .withInput("").
I'm still not sure why it works, or if this is the "correct" way of solving it. But at least it is a way forward.
No clue why using the pattern, I got the name twice though. But that one I'll leave alone.
Ok so I just started looking into databases yesterday
index.js: https://hatebin.com/pvqnubsrrs
database.js: https://hatebin.com/csgvmvolfz
I just want it to insert into the DB,
how would I accomplish that?
Someone told me it's creating a new DB, but when I run the command it says the table doesn't exist
The error says:
Error: SequelizeDatabaseError: SQLITE_ERROR: no such table: PointsSystems
However, I cannot find a spot in the code where I use PointsSystems, I only use PointsSystem, without the s
Edit: Thank you SigFried for making this more readable.
The error says PointSystems because, by default, Sequelize will pluralize the name you gave to the table. Your code looks O.K, the only missing part and the solution to your problem is the await sequelize.sync({ force: true })}. I made a little example to show you how it's done in a very basic way.
You should be able to find out why the sequelize.sync() methods is needed if you read this.
I'm trying to learn django but the instructor uses django 1.X.X.
So far, I've been able to update stuff to Django 3.X.X to get it working.
But I'm stuck now.
Specifically, in the below urlpatterns code:
urlpatterns = [
path('',views.SchoolListView.as_view(),name='list'),
path('<int:pk>/',views.SchoolDetailView.as_view(),name='detail')
]
The first path works. The second one doesn't.
When I click on the url nothing happens. No error code, nothing.
I think there is a problem with the syntax? Is it different for Django3?
I checked the documentation and couldn't find anything wrong.
Thank you.
For example:
path ('',views.index , name='index')
For your code:
path('',views.SchoolListView,name='list')
The second pattern is part of djangos generic view .Generic views abstract common patterns to the point where you don’t even need to write Python code to write an app.
path('<int:pk>/',views.SchoolDetailView.as_view(),name='detail')
Here pk represents primary key. Check if you have data with primary key you are giving in database.
Alternatively if u dont want to use generic method, you can use this
path('<int:school_id>/‘, views. SchoolListView, name='schoollist')
, where school_id(it can be other name depending on your model, verify it in db) should be the primary key in database created by django.
I am sure I am not the first to encounter this, but I was unable to find a solution while Googling.
I am trying to add a drop-down list to my document. At the top of my model I am adding these namespaces:
use \DocuSign\eSign\Model\List;
use \DocuSign\eSign\Model\ListItem;
When doing so I get this error because "List" is a reserved word in PHP.
A PHP Error was encountered
Severity: Parsing Error
Message: syntax error, unexpected List (T_LIST), expecting identifier (T_STRING)
Filename: models/Docusign_model.php
Line Number: 19
I tried changing the name of the class from List to Elist but then I got errors from ObjectSerializer that it could not find Elist:swaggerType.
What am I missing on how to add a list to my document?
Thom
#thom I think this is really a "PHP" parsing question as is answered here for you Parse error: syntax error, unexpected (T_STRING), expecting variable (T_VARIABLE)
So I think the $ missing is your real issue as discussed in the referenced article above and below from PHP Manual.
http://www.php.net/manual/en/language.oop5.basic.php
Recommend you look at GIT example from SDK using CustomFieldList at https://github.com/docusign/docusign-php-client/blob/ccc86ac37334f34728361d73b2f8c4592225b8d2/src/Model/CustomFieldsEnvelope.php
excerpt
protected static $swaggerTypes = [
'list_custom_fields' => '\DocuSign\eSign\Model\ListCustomField[]',
'text_custom_fields' => '\DocuSign\eSign\Model\TextCustomField[]'
];
http://www.php.net/manual/en/language.oop5.basic.php
Also, maybe the first place to validate if you even need a specific "use" is by reviewing this PHP sample code from a good friend Ergin https://gist.github.com/Ergin008/d4a8b9210fbea41414b0
As I see it with most of the DocuSign SDK's, you have the client and specific services you want to use per excerpt below:
// Download PHP client: https://github.com/docusign/DocuSign-PHP-Client
require_once './DocuSign-PHP-Client/src/DocuSign_Client.php';
require_once './DocuSign-PHP-Client/src/service/DocuSign_RequestSignatureService.php';
require_once './DocuSign-PHP-Client/src/service/DocuSign_ViewsService.php';
Regardless if I am right or wrong, let us know if this helped you go in the right direction :-)