So I am integrating AdMob banners in an android application. The Banner is situated at the bottom of view, working fine, not overlapping with the list view when scrolling and it's all good. I think that bottom position is a very good place to put the banner, but when clicking on the menu button, the menu does cover the banner. I guess this normal behavior but want to make sure it does not break the admob policies, specifically:
Ads should not be placed very close to or underneath buttons or any other object which users may accidentally click while interacting with your application.
Does anybody have a similar situation?
Thanks,
I think until you dont have it very close to the menu it would be fine.
All you need to make sure is that it should not interfere with user inputs and produce incorrect clicks.
Its usually on a more case to case basis.
Related
I've been doing searches trying to find help on this, but so far all I have found is how to set options for popping up a SharePoint modal dialog box from custom code.
However, I haven't created any custom web parts to display modal dialogs. What's happening, is if someone clicks the upload document button in a library, the upload document modal dialog comes up, but the ok and cancel buttons are half off of the bottom of the box. Users can click on them, but it just doesn't look very good.
I started playing with the CSS to make the modal dialog box bigger to reveal the buttons, and that works for the most part, but the real problem is the grant user permission dialog box.
When that is clicked, it doesn't show the ok and cancel buttons, and maximizing the dialog box doesn't reveal them. The user has to hit tab about 5-10 times before the focus moves to the ok button and is then clickable.
I would post an image, but I don't have enough reputation to do so.
Has anyone come across this? It seems very strange that the out of the box setting would have this problem.
The CSS that I use to adjust the height and width of the modal dialog is:
.ms-dlgFrame, .ms-dlgContent, .ms-dlgBorder, .ms-dlgFrameContainer
I'm just trying to set the height/min-height values, but I haven't had much luck.
We're using Internet Explorer 11 to view the pages.
Stevangelista actually pointed me in the right direction, I wish I could mark comments as answers, and since I'm new I can't upvote the comment, but here's the solution:
I am using a customized master page, and that comment had me take a look at the elements in the page.
Since the master page is being used in the dialog boxes as well, I used the s4-notdlg class to remove parts that weren't needed in the dialogs. Those parts were pushing the buttons below the bottom of the screen.
I'm not a css expert, so there may be ways of keeping those parts and still have the buttons accessible, but the particular issue I was trying to fix was resolved by using the s4-notdlg class to objects in my custom master page.
**Hello..
i am creating English To Gujarati Dictionary WinForm Application.
I need to set a system wide hook to the right click context menu on for text selection.
it means when this application is running,and if user selects word from any program and right click on it gujarati meaning of that word should be displayed as menu item.
How to do this?
or any other options like Registery Programming,shell extentions etc...?
i have to do this,even if you say its not possible.
so please help me.**
Hooking the mouse activity is the easy part. See SetWindowsHookEx, and lots of questions regarding hooking in SO. This way, you can tell when the mouse is right-clicked.
Getting the selected text is the harder part. See WindowFromPoint, for starters. You'd have to recognize the control, and if appropriate get the selected text from it. This will not always be possible using simple Win32 functions, if the control is complex.
Adding the translation to the right-click menu is probably the impossible part. Adding stuff to explorer context menu is not a problem, because explorer provides that possibility. But various applications will have various right-click menus, without a way to extend them. They might not even use Win32 for the menus, for whatever reason. A better option, IMO, would be one of the following:
Forget about changing the right-click menu. Open a window next to the point of selection with whatever content you want, and let the application show its own right-click menu.
If the user right-clicks while, say, pressing shift, show your own right-click menu, and don't pass the message to the application. So the user will see only one menu, which is yours. The user must of course be aware of this combination.
I have an android spinner which I call via the performClick method to show a list of items (the actual control is hidden from the user and is called from a checkbox, too complex to explain why I have done it this way).
If I do not want an item in the list, how can I dismiss the popup by clicking on the black area?
Does this make sense? :/
Edit: Sorry, forgot to mention that the users will not be able to operate the bottom buttons (device is going to be galaxy tab) as they will be covered up with protective layer due as they will be outdoors.
usually such a control is dismissed using the back key in the android applications. So I would suggest that you find a way to do it the same way on your control.
'Esc' button should do the same job..
I want to develop a panel with animation same as notification panel. I mean to say the notification panel is a cool control where you grab and slide down the notification bar and see all the notifications.
Actually, I am having 2 UI , 1st should be shown with Button at top, when user click on that button, the 2nd UI with listview items should be slide down same as notification panel and again when user click or drag the 2nd UI at the top side, then 2nd UI should be become invisible. I hope i made clear my question.
From Christian's answer, I am trying to use a sliding drawer that will display a
list of options. I need this to expand over the current ListView on the page.
So if anybody know how to implement such layout or UI with sliding down animation then please share it.
Please suggest how to build with such control or layout? any ideas or suggestions
Thanx
Have you tried the SlidingDrawer widget?
Paresh I found a solution in this post about sliding drawers.
android misc widgets has it implemented , though it still has some flaws but it will definitely prove helpful.
Though in the same SO post CommonsWare has quoted :
...
You similarly cannot make a
SlidingDrawer that descends from the
top.
Good Luck.
You can use SlidingTray from: http://aniqroid.sileria.com to make this happen
http://aniqroid.sileria.com/doc/api/com/sileria/android/view/SlidingTray.html
Alternatively you can also use a custom PopupWindow class which is part of Android API.
In SharePoint 2007, there's a top nav that the user can hover over, which reveals a dropdown menu of subitems. When they remove their mouse from the dropdown, it disappears, but only after a short delay. This can cause problems, as if people are trying to click a link on the page somewhere, but the nav menu hasn't hidden itself yet, they'll accidentally click it instead. This is compounded with the fact that the menu appearing in the first place is delayed as well, so right before they mouse over the link on the page they actually want to click, the menu will suddenly appear and intercept their click when they weren't meaning to.
I've poked at core.js at some suspect areas, but can't seem to nail it down. Any thoughts?
This is the normal behaviour of SharePoint. This control is the asp:Menu control of ASP.Net 2.0 and the only thing you can do is customized the MasterPage or the DefaultPage of your Site.
If you change the core.js file of "layouts" folder you'll lose Microsoft support, so take care about change any of the file from this folder.
I recommend that you modify the existent control or create a new one and put it in this position of the MasterPage.
This bit of CSS will fix it. I just had the same thing in sharepoint 2010 and this was all that was required to make the list disappear as soon as you roll off:
li.hover-off>ul
{
display:none;
}
The way it works is when you hover over an item in the nav it adds a css class called "hover" and as soon as your mouse leaves the area it changes the class to "hover-off" for 1 second before removing it completely. This CSS will hide the unordered list directly below the list item that has the class "hover-off" thus hiding the flyout as soon as your mouse leaves the parent.