BYTE name[1000];
In my visual c++ project there is a variable defined name with the BYTE data type. If i am not wrong then BYTE is equivalent to unsigned char. Now i want to convert this unsigned char * to LPCTSTR.
How should i do that?
LPCTSTR is defined as either char const* or wchar_t const* based on whether UNICODE is defined or not.
If UNICODE is defined, then you need to convert the multi-byte string to a wide-char string using MultiByteToWideChar.
If UNICODE is not defined, a simple cast will suffice: static_cast< char const* >( name ).
This assumes that name is a null-terminated c-string, in which case defining it BYTE would make no sense. You should use CHAR or TCHAR, based on how are you operating on name.
You can also assign 'name' variable to CString object directly like:
CString strName = name;
And then you can call CString's GetBuffer() or even preferably GetString() method which is more better to get LPCTSTR. The advantage is CString class will perform any conversions required automatically for you. No need to worry about Unicode settings.
LPCTSTR pszName = strName.GetString();
Related
Trying to create LPCTSTR conversion operator for my class:
AuthData::operator LPCTSTR() const
{
const char* k = "aaaa";
return k;
}
Error: return value type does not match the function type
Why it don't match?
If Unicode Character Set is enabled, LPCTSTR type is const wchar_t *.
#Edit
You can read about these types here:
https://softwareengineering.stackexchange.com/a/194768
In a Multi-Byte project, LPCTSTR is defined as LPCSTR, which is CONST CHAR*, so your code should compile (if it is in fact non-Unicode).
NEVER mix TCHARs with chars! At least - not without a conversion. Your declaration practically implies that TCHAR is defined as char, so why would you suggest to the readers that you are TCHAR-aware (since you are not)?
I am writing small application which uses com technology. I want to convert BSTR string to an unsigned char. To do this, i used W2A() Macro to convert from BSTR to String and then copied String.C_STR() to an unsigned char array. The code snippet is as follows:
Send(BSTR *packet, int length)
{
std::string strPacket = W2A(*packet);
unsigned char * pBuffer = new unsigned char [strPacket.length()+1];
memset(pBuffer,0,strPacket.length()+1);
memcpy(pBuffer,strPacket.c_str(),strPacket.length()+1);
}
This works fine when packet contains normal string. But if the packet contains a NUL character in it, the problem occurs. Some unknown characters appear after that NUL in the pBuffer i.e, after conversion.
Can anyone please let me know how to avoid that? Or is there any other way to do it correctly?
A BSTR is a Windows API type and must be managed with API macros or functions. If you cannot use W2A macro because your string may have null chars inside, you will have to use functions as WideCharToMultiByte that can convert from wide characters of BSTR to narrow chararacters for a char*. Be sure to have the SDK documentation. Alternatively, you could make you program use WCHARs
I want to know if is there any way to convert a unicode code to a string or char in C++ 11.
I've been trying with extended latin unicode letter Á (as an example) which has this codification:
letter: Á
Unicode: 0x00C1
UTF8 literal: \xc3\x81
I've been able to do so if it's hardcoded as:
const char* c = u8"\u00C1";
But if i got the byte sequence as a short, how can I do the equivalent to get the char* or std::string 'Á'?
EDIT, SOLUTION:
I was finally able to do so, here is the solution if anyone needs it:
std::wstring ws;
for(short input : inputList)
{
wchar_t wc(input);
ws += wc;
}
std::wstring_convert<std::codecvt_utf8<wchar_t>> cv;
str = cv.to_bytes(ws);
Thanks for the comments they were very helpful.
The C++11 standard contains codecvt_utf8, which converts between some internal character type (try char16_t if your compiler has it, otherwise wchar_t) and UTF-8 encoding.
The problems is that char is only one byte length, while unicode characters require a size of two bytes.
You can still treat it as char*, but you must remember that you are not dealing with an ascii string (there will be zeros).
You may have to switch to wchar_t.
I am trying to store some contents into a string variable by passing it as a parameter in various types of Windows API functions which accepts variable like char *.
For example, my code is:-
std::string myString;
GetCurrentDirectoryA( MAX_PATH, myString );
Now how do I convert the string variable to LPSTR in this case.
Please see, this function is not meant for passing the contents of string as input, but the function stores some contents into string variable after execution. So, myString.c_str( ) is ruled out.
Edit: I have a workaround solution of removing the concept of string and replacing it with something like
char myString[ MAX_PATH ];
but that is not my objective. I want to make use of string. Is there any way possible?
Also casting like
GetCurrentDirectoryA( MAX_PATH, ( LPSTR ) myString );
is not working.
Thanks in advance for the help.
Usually, people rewrite the Windows functions they need to be std::string friendly, like this:
std::string GetCurrentDirectoryA()
{
char buffer[MAX_PATH];
GetCurrentDirectoryA( MAX_PATH, buffer );
return std::string(buffer);
}
or this for wide char support:
std::wstring GetCurrentDirectoryW()
{
wchar_t buffer[MAX_PATH];
GetCurrentDirectoryW( MAX_PATH, buffer );
return std::wstring(buffer);
}
LPTSTR is defined as TCHAR*, so actually it is just an ordinary C-string, BUT it depends on whether you are working with ASCII or with Unicode in your code. So do
LPTSTR lpStr = new TCHAR[256];
ZeroMemory(lpStr, 256);
//fill the string using i.e. _tcscpy
const char* cpy = myString.c_str();
_tcscpy (lpStr, cpy);
//use lpStr
See here for a reference on _tcscpy and this thread.
Typically, I would read the data into a TCHAR and then copy it into my std::string. That's the simplest way.
Some body help me regarding to the following problem
strFixFactorSide = _T("0.5");
dFixFactorSide = atof((const char *)(LPCTSTR)strFixFactorSide);
"dFixFactorSide" takes value as 0.0000;
How I will get correct value?
Use _tstof() instead of atof(), and cast CString to LPCTSTR, and leave it as such, instead of trying to get it to const char *. Forget about const char * (LPCSTR) while you're working with unicode and use only const _TCHAR * (LPCTSTR).
int _tmain(int argc, TCHAR* argv[], TCHAR* envp[])
{
int nRetCode = 0;
CString s1 = _T("123.4");
CString s2 = _T("567.8");
double v1 = _tstof((LPCTSTR)s1);
double v2 = _tstof((LPCTSTR)s2);
_tprintf(_T("%.3f"), v1 + v2);
return nRetCode;
}
and running this correctly gives the expected answer.
I think your CString strFixFactorSide is a Unicode (UTF-16) string.
If it is, the cast (const char *) only changes the pointer type, but the string it points to still remains Unicode.
atof() doesn't work with Unicode strings. If you shove L"0.5" into it, it will fetch bytes 0x30 ('0') and 0x00 (also part of UTF-16 '0'), treat that as a NUL-terminated ASCII string "0" and convert it to 0.0.
If CString strFixFactorSide is a Unicode string, you need to either first convert it to an ASCII string and then apply atof() or use a function capable of converting Unicode strings to numbers. _wtof() can be used for Unicode strings.