Currently, I am creating a web application for an online shopping cart and I need to maintain session on each jsf page..
My questions are :
How can I create and destroy session in managed bean
How can I access value stored in session variable? Like this?
FacesContext.getCurrentInstance().getExternalContext().getSessionMap.put("key",object);
How can I destroy a session in jsf
I also need to destroy the session using session.invalidate() but i am failed !!
How can I create and destroy session in managed bean
You don't need to create it yourself. The servletcontainer will do it automatically for you on demand. In other words, whenever you (or JSF) need to set an object in the session scope, then the servletcontainer will automatically create the session. In a JSF web application, this will happen when you
Reference a #SessionScoped or #ViewScoped managed bean for the first time.
Obtain the session by ExternalContext#getSession(), passing true for the first time.
Store an object in session map by ExternalContext#getSessionMap() for the first time.
Return a page with a <h:form> for the first time while the state saving method is set to "server".
You can destroy the session by ExternalContext#invalidateSession(). E.g.
public String logout() {
FacesContext.getCurrentInstance().getExternalContext().invalidateSession();
return "login?faces-redirect=true";
}
Remember to send a redirect afterwards, because the session objects are still available in the response of the current request, but not anymore in the next request.
How can I access value stored in session variable?
Just make it a property of a #SessionScoped managed bean. Alternatively, you can also manually manipulate the ExternalContext#getSessionMap(), yes.
How can I destroy a session in jsf
This is already answered in the first question.
See also:
How do servlets work? Instantiation, sessions, shared variables and multithreading
Basic steps for starting session in jsf
How to choose the right bean scope?
Related
I noticed that there are different bean scopes like:
#RequestScoped
#ViewScoped
#FlowScoped
#SessionScoped
#ApplicationScoped
What is the purpose of each? How do I choose a proper scope for my bean?
Introduction
It represents the scope (the lifetime) of the bean. This is easier to understand if you are familiar with "under the covers" working of a basic servlet web application: How do servlets work? Instantiation, sessions, shared variables and multithreading.
#Request/View/Flow/Session/ApplicationScoped
A #RequestScoped bean lives as long as a single HTTP request-response cycle (note that an Ajax request counts as a single HTTP request too). A #ViewScoped bean lives as long as you're interacting with the same JSF view by postbacks which call action methods returning null/void without any navigation/redirect. A #FlowScoped bean lives as long as you're navigating through the specified collection of views registered in the flow configuration file. A #SessionScoped bean lives as long as the established HTTP session. An #ApplicationScoped bean lives as long as the web application runs. Note that the CDI #Model is basically a stereotype for #Named #RequestScoped, so same rules apply.
Which scope to choose depends solely on the data (the state) the bean holds and represents. Use #RequestScoped for simple and non-ajax forms/presentations. Use #ViewScoped for rich ajax-enabled dynamic views (ajaxbased validation, rendering, dialogs, etc). Use #FlowScoped for the "wizard" ("questionnaire") pattern of collecting input data spread over multiple pages. Use #SessionScoped for client specific data, such as the logged-in user and user preferences (language, etc). Use #ApplicationScoped for application wide data/constants, such as dropdown lists which are the same for everyone, or managed beans without any instance variables and having only methods.
Abusing an #ApplicationScoped bean for session/view/request scoped data would make it to be shared among all users, so anyone else can see each other's data which is just plain wrong. Abusing a #SessionScoped bean for view/request scoped data would make it to be shared among all tabs/windows in a single browser session, so the enduser may experience inconsitenties when interacting with every view after switching between tabs which is bad for user experience. Abusing a #RequestScoped bean for view scoped data would make view scoped data to be reinitialized to default on every single (ajax) postback, causing possibly non-working forms (see also points 4 and 5 here). Abusing a #ViewScoped bean for request, session or application scoped data, and abusing a #SessionScoped bean for application scoped data doesn't affect the client, but it unnecessarily occupies server memory and is plain inefficient.
Note that the scope should rather not be chosen based on performance implications, unless you really have a low memory footprint and want to go completely stateless; you'd need to use exclusively #RequestScoped beans and fiddle with request parameters to maintain the client's state. Also note that when you have a single JSF page with differently scoped data, then it's perfectly valid to put them in separate backing beans in a scope matching the data's scope. The beans can just access each other via #ManagedProperty in case of JSF managed beans or #Inject in case of CDI managed beans.
See also:
Difference between View and Request scope in managed beans
Advantages of using JSF Faces Flow instead of the normal navigation system
Communication in JSF2 - Managed bean scopes
#CustomScoped/NoneScoped/Dependent
It's not mentioned in your question, but (legacy) JSF also supports #CustomScoped and #NoneScoped, which are rarely used in real world. The #CustomScoped must refer a custom Map<K, Bean> implementation in some broader scope which has overridden Map#put() and/or Map#get() in order to have more fine grained control over bean creation and/or destroy.
The JSF #NoneScoped and CDI #Dependent basically lives as long as a single EL-evaluation on the bean. Imagine a login form with two input fields referring a bean property and a command button referring a bean action, thus with in total three EL expressions, then effectively three instances will be created. One with the username set, one with the password set and one on which the action is invoked. You normally want to use this scope only on beans which should live as long as the bean where it's being injected. So if a #NoneScoped or #Dependent is injected in a #SessionScoped, then it will live as long as the #SessionScoped bean.
See also:
Expire specific managed bean instance after time interval
what is none scope bean and when to use it?
What is the default Managed Bean Scope in a JSF 2 application?
Flash scope
As last, JSF also supports the flash scope. It is backed by a short living cookie which is associated with a data entry in the session scope. Before the redirect, a cookie will be set on the HTTP response with a value which is uniquely associated with the data entry in the session scope. After the redirect, the presence of the flash scope cookie will be checked and the data entry associated with the cookie will be removed from the session scope and be put in the request scope of the redirected request. Finally the cookie will be removed from the HTTP response. This way the redirected request has access to request scoped data which was been prepared in the initial request.
This is actually not available as a managed bean scope, i.e. there's no such thing as #FlashScoped. The flash scope is only available as a map via ExternalContext#getFlash() in managed beans and #{flash} in EL.
See also:
How to show faces message in the redirected page
Pass an object between #ViewScoped beans without using GET params
CDI missing #ViewScoped and #FlashScoped
Since JSF 2.3 all the bean scopes defined in package javax.faces.bean package have been deprecated to align the scopes with CDI. Moreover they're only applicable if your bean is using #ManagedBean annotation. If you are using JSF versions below 2.3 refer to the legacy answer at the end.
From JSF 2.3 here are scopes that can be used on JSF Backing Beans:
1. #javax.enterprise.context.ApplicationScoped: The application scope persists for the entire duration of the web application. That scope is shared among all requests and all sessions. This is useful when you have data for whole application.
2. #javax.enterprise.context.SessionScoped: The session scope persists from the time that a session is established until session termination. The session context is shared between all requests that occur in the same HTTP session. This is useful when you wont to save data for a specific client for a particular session.
3. #javax.enterprise.context.ConversationScoped: The conversation scope persists as log as the bean lives. The scope provides 2 methods: Conversation.begin() and Conversation.end(). These methods should called explicitly, either to start or end the life of a bean.
4. #javax.enterprise.context.RequestScoped: The request scope is short-lived. It starts when an HTTP request is submitted and ends after the response is sent back to the client. If you place a managed bean into request scope, a new instance is created with each request. It is worth considering request scope if you are concerned about the cost of session scope storage.
5. #javax.faces.flow.FlowScoped: The Flow scope persists as long as the Flow lives. A flow may be defined as a contained set of pages (or views) that define a unit of work. Flow scoped been is active as long as user navigates with in the Flow.
6. #javax.faces.view.ViewScoped: A bean in view scope persists while the same JSF page is redisplayed. As soon as the user navigates to a different page, the bean goes out of scope.
The following legacy answer applies JSF version before 2.3
As of JSF 2.x there are 4 Bean Scopes:
#SessionScoped
#RequestScoped
#ApplicationScoped
#ViewScoped
Session Scope: The session scope persists from the time that a session is established until session termination. A session terminates
if the web application invokes the invalidate method on the
HttpSession object, or if it times out.
RequestScope: The request scope is short-lived. It starts when an HTTP request is submitted and ends after the response is sent back
to the client. If you place a managed bean into request scope, a new
instance is created with each request. It is worth considering request
scope if you are concerned about the cost of session scope storage.
ApplicationScope: The application scope persists for the entire duration of the web application. That scope is shared among all
requests and all sessions. You place managed beans into the
application scope if a single bean should be shared among all
instances of a web application. The bean is constructed when it is
first requested by any user of the application, and it stays alive
until the web application is removed from the application server.
ViewScope: View scope was added in JSF 2.0. A bean in view scope persists while the same JSF page is redisplayed. (The JSF
specification uses the term view for a JSF page.) As soon as the user
navigates to a different page, the bean goes out of scope.
Choose the scope you based on your requirement.
Source: Core Java Server Faces 3rd Edition by David Geary & Cay Horstmann [Page no. 51 - 54]
I noticed that there are different bean scopes like:
#RequestScoped
#ViewScoped
#FlowScoped
#SessionScoped
#ApplicationScoped
What is the purpose of each? How do I choose a proper scope for my bean?
Introduction
It represents the scope (the lifetime) of the bean. This is easier to understand if you are familiar with "under the covers" working of a basic servlet web application: How do servlets work? Instantiation, sessions, shared variables and multithreading.
#Request/View/Flow/Session/ApplicationScoped
A #RequestScoped bean lives as long as a single HTTP request-response cycle (note that an Ajax request counts as a single HTTP request too). A #ViewScoped bean lives as long as you're interacting with the same JSF view by postbacks which call action methods returning null/void without any navigation/redirect. A #FlowScoped bean lives as long as you're navigating through the specified collection of views registered in the flow configuration file. A #SessionScoped bean lives as long as the established HTTP session. An #ApplicationScoped bean lives as long as the web application runs. Note that the CDI #Model is basically a stereotype for #Named #RequestScoped, so same rules apply.
Which scope to choose depends solely on the data (the state) the bean holds and represents. Use #RequestScoped for simple and non-ajax forms/presentations. Use #ViewScoped for rich ajax-enabled dynamic views (ajaxbased validation, rendering, dialogs, etc). Use #FlowScoped for the "wizard" ("questionnaire") pattern of collecting input data spread over multiple pages. Use #SessionScoped for client specific data, such as the logged-in user and user preferences (language, etc). Use #ApplicationScoped for application wide data/constants, such as dropdown lists which are the same for everyone, or managed beans without any instance variables and having only methods.
Abusing an #ApplicationScoped bean for session/view/request scoped data would make it to be shared among all users, so anyone else can see each other's data which is just plain wrong. Abusing a #SessionScoped bean for view/request scoped data would make it to be shared among all tabs/windows in a single browser session, so the enduser may experience inconsitenties when interacting with every view after switching between tabs which is bad for user experience. Abusing a #RequestScoped bean for view scoped data would make view scoped data to be reinitialized to default on every single (ajax) postback, causing possibly non-working forms (see also points 4 and 5 here). Abusing a #ViewScoped bean for request, session or application scoped data, and abusing a #SessionScoped bean for application scoped data doesn't affect the client, but it unnecessarily occupies server memory and is plain inefficient.
Note that the scope should rather not be chosen based on performance implications, unless you really have a low memory footprint and want to go completely stateless; you'd need to use exclusively #RequestScoped beans and fiddle with request parameters to maintain the client's state. Also note that when you have a single JSF page with differently scoped data, then it's perfectly valid to put them in separate backing beans in a scope matching the data's scope. The beans can just access each other via #ManagedProperty in case of JSF managed beans or #Inject in case of CDI managed beans.
See also:
Difference between View and Request scope in managed beans
Advantages of using JSF Faces Flow instead of the normal navigation system
Communication in JSF2 - Managed bean scopes
#CustomScoped/NoneScoped/Dependent
It's not mentioned in your question, but (legacy) JSF also supports #CustomScoped and #NoneScoped, which are rarely used in real world. The #CustomScoped must refer a custom Map<K, Bean> implementation in some broader scope which has overridden Map#put() and/or Map#get() in order to have more fine grained control over bean creation and/or destroy.
The JSF #NoneScoped and CDI #Dependent basically lives as long as a single EL-evaluation on the bean. Imagine a login form with two input fields referring a bean property and a command button referring a bean action, thus with in total three EL expressions, then effectively three instances will be created. One with the username set, one with the password set and one on which the action is invoked. You normally want to use this scope only on beans which should live as long as the bean where it's being injected. So if a #NoneScoped or #Dependent is injected in a #SessionScoped, then it will live as long as the #SessionScoped bean.
See also:
Expire specific managed bean instance after time interval
what is none scope bean and when to use it?
What is the default Managed Bean Scope in a JSF 2 application?
Flash scope
As last, JSF also supports the flash scope. It is backed by a short living cookie which is associated with a data entry in the session scope. Before the redirect, a cookie will be set on the HTTP response with a value which is uniquely associated with the data entry in the session scope. After the redirect, the presence of the flash scope cookie will be checked and the data entry associated with the cookie will be removed from the session scope and be put in the request scope of the redirected request. Finally the cookie will be removed from the HTTP response. This way the redirected request has access to request scoped data which was been prepared in the initial request.
This is actually not available as a managed bean scope, i.e. there's no such thing as #FlashScoped. The flash scope is only available as a map via ExternalContext#getFlash() in managed beans and #{flash} in EL.
See also:
How to show faces message in the redirected page
Pass an object between #ViewScoped beans without using GET params
CDI missing #ViewScoped and #FlashScoped
Since JSF 2.3 all the bean scopes defined in package javax.faces.bean package have been deprecated to align the scopes with CDI. Moreover they're only applicable if your bean is using #ManagedBean annotation. If you are using JSF versions below 2.3 refer to the legacy answer at the end.
From JSF 2.3 here are scopes that can be used on JSF Backing Beans:
1. #javax.enterprise.context.ApplicationScoped: The application scope persists for the entire duration of the web application. That scope is shared among all requests and all sessions. This is useful when you have data for whole application.
2. #javax.enterprise.context.SessionScoped: The session scope persists from the time that a session is established until session termination. The session context is shared between all requests that occur in the same HTTP session. This is useful when you wont to save data for a specific client for a particular session.
3. #javax.enterprise.context.ConversationScoped: The conversation scope persists as log as the bean lives. The scope provides 2 methods: Conversation.begin() and Conversation.end(). These methods should called explicitly, either to start or end the life of a bean.
4. #javax.enterprise.context.RequestScoped: The request scope is short-lived. It starts when an HTTP request is submitted and ends after the response is sent back to the client. If you place a managed bean into request scope, a new instance is created with each request. It is worth considering request scope if you are concerned about the cost of session scope storage.
5. #javax.faces.flow.FlowScoped: The Flow scope persists as long as the Flow lives. A flow may be defined as a contained set of pages (or views) that define a unit of work. Flow scoped been is active as long as user navigates with in the Flow.
6. #javax.faces.view.ViewScoped: A bean in view scope persists while the same JSF page is redisplayed. As soon as the user navigates to a different page, the bean goes out of scope.
The following legacy answer applies JSF version before 2.3
As of JSF 2.x there are 4 Bean Scopes:
#SessionScoped
#RequestScoped
#ApplicationScoped
#ViewScoped
Session Scope: The session scope persists from the time that a session is established until session termination. A session terminates
if the web application invokes the invalidate method on the
HttpSession object, or if it times out.
RequestScope: The request scope is short-lived. It starts when an HTTP request is submitted and ends after the response is sent back
to the client. If you place a managed bean into request scope, a new
instance is created with each request. It is worth considering request
scope if you are concerned about the cost of session scope storage.
ApplicationScope: The application scope persists for the entire duration of the web application. That scope is shared among all
requests and all sessions. You place managed beans into the
application scope if a single bean should be shared among all
instances of a web application. The bean is constructed when it is
first requested by any user of the application, and it stays alive
until the web application is removed from the application server.
ViewScope: View scope was added in JSF 2.0. A bean in view scope persists while the same JSF page is redisplayed. (The JSF
specification uses the term view for a JSF page.) As soon as the user
navigates to a different page, the bean goes out of scope.
Choose the scope you based on your requirement.
Source: Core Java Server Faces 3rd Edition by David Geary & Cay Horstmann [Page no. 51 - 54]
I noticed that there are different bean scopes like:
#RequestScoped
#ViewScoped
#FlowScoped
#SessionScoped
#ApplicationScoped
What is the purpose of each? How do I choose a proper scope for my bean?
Introduction
It represents the scope (the lifetime) of the bean. This is easier to understand if you are familiar with "under the covers" working of a basic servlet web application: How do servlets work? Instantiation, sessions, shared variables and multithreading.
#Request/View/Flow/Session/ApplicationScoped
A #RequestScoped bean lives as long as a single HTTP request-response cycle (note that an Ajax request counts as a single HTTP request too). A #ViewScoped bean lives as long as you're interacting with the same JSF view by postbacks which call action methods returning null/void without any navigation/redirect. A #FlowScoped bean lives as long as you're navigating through the specified collection of views registered in the flow configuration file. A #SessionScoped bean lives as long as the established HTTP session. An #ApplicationScoped bean lives as long as the web application runs. Note that the CDI #Model is basically a stereotype for #Named #RequestScoped, so same rules apply.
Which scope to choose depends solely on the data (the state) the bean holds and represents. Use #RequestScoped for simple and non-ajax forms/presentations. Use #ViewScoped for rich ajax-enabled dynamic views (ajaxbased validation, rendering, dialogs, etc). Use #FlowScoped for the "wizard" ("questionnaire") pattern of collecting input data spread over multiple pages. Use #SessionScoped for client specific data, such as the logged-in user and user preferences (language, etc). Use #ApplicationScoped for application wide data/constants, such as dropdown lists which are the same for everyone, or managed beans without any instance variables and having only methods.
Abusing an #ApplicationScoped bean for session/view/request scoped data would make it to be shared among all users, so anyone else can see each other's data which is just plain wrong. Abusing a #SessionScoped bean for view/request scoped data would make it to be shared among all tabs/windows in a single browser session, so the enduser may experience inconsitenties when interacting with every view after switching between tabs which is bad for user experience. Abusing a #RequestScoped bean for view scoped data would make view scoped data to be reinitialized to default on every single (ajax) postback, causing possibly non-working forms (see also points 4 and 5 here). Abusing a #ViewScoped bean for request, session or application scoped data, and abusing a #SessionScoped bean for application scoped data doesn't affect the client, but it unnecessarily occupies server memory and is plain inefficient.
Note that the scope should rather not be chosen based on performance implications, unless you really have a low memory footprint and want to go completely stateless; you'd need to use exclusively #RequestScoped beans and fiddle with request parameters to maintain the client's state. Also note that when you have a single JSF page with differently scoped data, then it's perfectly valid to put them in separate backing beans in a scope matching the data's scope. The beans can just access each other via #ManagedProperty in case of JSF managed beans or #Inject in case of CDI managed beans.
See also:
Difference between View and Request scope in managed beans
Advantages of using JSF Faces Flow instead of the normal navigation system
Communication in JSF2 - Managed bean scopes
#CustomScoped/NoneScoped/Dependent
It's not mentioned in your question, but (legacy) JSF also supports #CustomScoped and #NoneScoped, which are rarely used in real world. The #CustomScoped must refer a custom Map<K, Bean> implementation in some broader scope which has overridden Map#put() and/or Map#get() in order to have more fine grained control over bean creation and/or destroy.
The JSF #NoneScoped and CDI #Dependent basically lives as long as a single EL-evaluation on the bean. Imagine a login form with two input fields referring a bean property and a command button referring a bean action, thus with in total three EL expressions, then effectively three instances will be created. One with the username set, one with the password set and one on which the action is invoked. You normally want to use this scope only on beans which should live as long as the bean where it's being injected. So if a #NoneScoped or #Dependent is injected in a #SessionScoped, then it will live as long as the #SessionScoped bean.
See also:
Expire specific managed bean instance after time interval
what is none scope bean and when to use it?
What is the default Managed Bean Scope in a JSF 2 application?
Flash scope
As last, JSF also supports the flash scope. It is backed by a short living cookie which is associated with a data entry in the session scope. Before the redirect, a cookie will be set on the HTTP response with a value which is uniquely associated with the data entry in the session scope. After the redirect, the presence of the flash scope cookie will be checked and the data entry associated with the cookie will be removed from the session scope and be put in the request scope of the redirected request. Finally the cookie will be removed from the HTTP response. This way the redirected request has access to request scoped data which was been prepared in the initial request.
This is actually not available as a managed bean scope, i.e. there's no such thing as #FlashScoped. The flash scope is only available as a map via ExternalContext#getFlash() in managed beans and #{flash} in EL.
See also:
How to show faces message in the redirected page
Pass an object between #ViewScoped beans without using GET params
CDI missing #ViewScoped and #FlashScoped
Since JSF 2.3 all the bean scopes defined in package javax.faces.bean package have been deprecated to align the scopes with CDI. Moreover they're only applicable if your bean is using #ManagedBean annotation. If you are using JSF versions below 2.3 refer to the legacy answer at the end.
From JSF 2.3 here are scopes that can be used on JSF Backing Beans:
1. #javax.enterprise.context.ApplicationScoped: The application scope persists for the entire duration of the web application. That scope is shared among all requests and all sessions. This is useful when you have data for whole application.
2. #javax.enterprise.context.SessionScoped: The session scope persists from the time that a session is established until session termination. The session context is shared between all requests that occur in the same HTTP session. This is useful when you wont to save data for a specific client for a particular session.
3. #javax.enterprise.context.ConversationScoped: The conversation scope persists as log as the bean lives. The scope provides 2 methods: Conversation.begin() and Conversation.end(). These methods should called explicitly, either to start or end the life of a bean.
4. #javax.enterprise.context.RequestScoped: The request scope is short-lived. It starts when an HTTP request is submitted and ends after the response is sent back to the client. If you place a managed bean into request scope, a new instance is created with each request. It is worth considering request scope if you are concerned about the cost of session scope storage.
5. #javax.faces.flow.FlowScoped: The Flow scope persists as long as the Flow lives. A flow may be defined as a contained set of pages (or views) that define a unit of work. Flow scoped been is active as long as user navigates with in the Flow.
6. #javax.faces.view.ViewScoped: A bean in view scope persists while the same JSF page is redisplayed. As soon as the user navigates to a different page, the bean goes out of scope.
The following legacy answer applies JSF version before 2.3
As of JSF 2.x there are 4 Bean Scopes:
#SessionScoped
#RequestScoped
#ApplicationScoped
#ViewScoped
Session Scope: The session scope persists from the time that a session is established until session termination. A session terminates
if the web application invokes the invalidate method on the
HttpSession object, or if it times out.
RequestScope: The request scope is short-lived. It starts when an HTTP request is submitted and ends after the response is sent back
to the client. If you place a managed bean into request scope, a new
instance is created with each request. It is worth considering request
scope if you are concerned about the cost of session scope storage.
ApplicationScope: The application scope persists for the entire duration of the web application. That scope is shared among all
requests and all sessions. You place managed beans into the
application scope if a single bean should be shared among all
instances of a web application. The bean is constructed when it is
first requested by any user of the application, and it stays alive
until the web application is removed from the application server.
ViewScope: View scope was added in JSF 2.0. A bean in view scope persists while the same JSF page is redisplayed. (The JSF
specification uses the term view for a JSF page.) As soon as the user
navigates to a different page, the bean goes out of scope.
Choose the scope you based on your requirement.
Source: Core Java Server Faces 3rd Edition by David Geary & Cay Horstmann [Page no. 51 - 54]
I have a JSF 1.2 app that has a session based bean. This bean is used for searching our database.
On our homepage I have a few HTML controls with build up a URL of search parameters, which then sets the browser URL to the JSP.
Since the bean is session based, the first time you access via the home page, the parameters are passed through correctly. However, subsequent access means the parameters are ignored as no functions in the bean are executed.
What is the best way to force the init function in the bean to reload?
This is fully expected behavior for a session scoped bean. It's stored in the HTTP session and reused as long as the HTTP session lives and not recreated/reinitialized on every HTTP request. If you intend to recreate/reinitialize the bean on every HTTP request, then you should be placing it in the request scope instead.
However, if the bean represents a mix of request scoped data and session scoped data, then you should rather split down the bean in two separate beans, a request scoped one for the request scoped data and a session scoped one for the session scoped data. You can use <managed-property> on the request scoped one to inject the session scoped one as a property of the request scoped one. This way you can put actions in the request scoped one which would need to access/manipulate the data of the session scoped one.
See also:
How to choose the right bean scope?
Passing data between managed components in JSF
I want a method in a session scoped backing bean to be called after a user logs in. How can I do that?
Environment: Spring Security 3.0.x, Spring 3.0.x and JSF 1.2. The backing beans are managed by Spring.
Background: Sessions are created even without login. My session scoped bean holds settings, that are initially set to default values. After login I want to update the session state to the preferences stored in the database for that particular user. To achieve that I imagined an interface or even simpler an annotated (e.g. #PostLogin) method, but so far I have not found anything like that.
It would be OK if that method is called on every principal change, i.e. also on logout. It would also be acceptable if the whole bean is destructed and recreated on login, though my other session scoped beans should survive.
What I have found so far is:
ApplicationListener<AuthenticationSuccessEvent>: The listener apparently needs to be application scoped, and I can't get access to my session scoped bean in it. #Autowired plus scope proxy don't work. The injected object is broken; it does not contain its dependencies although the real backing bean does.
<form-login authentication-success-handler-ref="..">: haven't tried this, but I need the method to be called independent of the used login procedure. Other than form based we support remember me and programmatic login (e.g. automatically logged in after password forgotten process).
Answering my own question:
ApplicationListener was the right track, however #Autowired was not.
I defined an interface with one method, that is implemented by my session scoped bean. The (singleton scoped) event listener class then uses ApplicationContext.getBeansOfType(..) to find the session beans by that interface and invokes the interface's method on each of them.