I am having a strange Excel 2007 issue, and I am not quite sure how to explain this. So bear with me please....
I have created a few right click buttons to call various backend VBA functions that I have written. They were working fine earlier today, and now for some reason, a button is appearing that is not from the code in my worksheet. When you click it, it is attempting to open another worksheet and execute code from it. The two files are not in the same directory nor are they named anything similar. I deleted the file that the button is trying to execute from and now it just simply gives me an error 400.
So, I couldn’t figure that out, and have since deleted every single scrap of code in the backend of this file, and the button still appears. Any ideas what could be causing this? It seems like maybe its mixing files up or saving a copy somewhere in a temp directory and trying to access that instead of the actual code that is written in the VBA. Is there a cache I need to clear out or something?
I know I didn’t exactly do a great job describing this, so I will be more than happy to provide any and all other details that you may need. Just let me know what is going on.
EDIT #1 -- New Information ==
I can even open a new, completely blank excel file and the right click button is still there.
EDIT #2 -- Tried Diagnostics ==
I just tried running the Excel diagnostics and it found no problems. It is strange, it is like this macro has somehow became global or stored in some type of cache or something.
I hope I'm understanding your issue correctly.
If you know what right-click (context) menus the button is appearing in you should be able to fix them with a Reset command. For example if it's appearing in the Cell context menu, you could try this in the VBE's Immediate window:
Application.Commandbars("Cell").Reset
This will reset the entire menu to its default state.
Also, you might be interested in a tool I wrote, MenuRighter, that allows you to tweak your right-click menus. It also has a setting to show you the Caption and ID of any context menu.
Related
Not sure if this is the correct place to post this but this issue is driving me insane....
The Issue:
I have come to use my PC after the weekend and for some reason the layout of the VBA Project stuff is completely messed up...
Usually when my VBA is set up very nicely in what I believe is the standard viewing mode IE the Project box to the left and the code to right and the intermediate window at the bottom...
For some reason now I get the following:
As you can see it is just the code...
I then click on the project explorer window and the project details appear, but as one ridiculously large page....
Then I minimise the window and alter its shape to try and get it at least look like it used to...
I can live with this to an extent although everything is floating and annoying... But now, every time I click onto a module (to view the code). It opens each module as its own seperate window!
This as you can imagine is unsustainable when working with as lot of code and having to flick between different modules
What I have Tried:
I have tried looking in different settings and I can not see anything different...
I have restarted my PC and it is still the same...
I have tired opening a different spreadsheet and still the same....
Does anyone have any suggestions? I just want it to be back to the simple layout of everything joined together etc...
I am making a simple tool for my job. It involves opening a file dialog box, selecting a file, opening it, analyzing it for different items, then creating a new workbook with the results. This is all done with VBA macros, activated via a command button.
The code works fine, all does what it's supposed to. However, at the start when the file dialog box is first opened, sometimes this error message pops up:
It doesn't affect the code or how it runs whatsoever, but it is a bit of a nuisance. There is no further detail provided for this "error". Does anyone know what might cause this popup?
This has been happening increasingly, when I have a sheets.add or sheets.delete in excel VBA. After searching and searching I finally found the official Microsoft support page on it. My question is, does anyone know why I could have stepped through this code just fine over and over, and then all of a sudden it starts doing what Microsoft says it would always do, and is there a way to fix it?
Sub foo()
Sheets.add
debug.print "sheet added" 'breakpoint here
End sub
It's as simple as that. You won't be able to recreate it, because the issue I'm asking about is the fact that it doesn't happen at first. It works just fine over and over then randomly presents the error described in the linked Microsoft support page.
Check if Microsoft Visual Basic for Applications Extensibility is being referenced in the project.
You can check that in the Tools/References Menu on the Visual Basic window of the project.
Referencing Visual Basic for Applications Extensibility prevents the program having its execution suspended:
Excel helps says specifically:
A change was made programmatically to the project using the extensibility (add-in) object model. This prevents the program from having execution suspended. You can continue running, or end execution, but can't suspend execution.
You are unable to step through code when making changes to the project (dynamically eg using InsertLine etc). the code can be run but not stepped through.
Deleting certain objects including ActiveX objects actually changes the VB project. It took me some time to realize that the following line of code prevented the VBE from entering break mode:
Excel.ActiveSheet.DrawingObjects.Delete
If you can identify the code causing the issue, and the order of operations isn't important, move it to the end of your script.
Here are a few suggestions which are not fool-proof,
Firstly, verify that the error does not occur if a breakpoint is not set.
If it doesn't, try a few other things:
From the VBE Debug menu, "Compile VBA Project", it's worth a shot.
Delete the line entirely. Run the code. Then put the line back in and try again with the breakpoint.
Add a DoEvents statement after the Sheets.Add
Use a MsgBox instead of a breakpoint on a Debug.Print. With the message box displayed, attempt to manually break using ctrl+fn+End. (At this point, "breaking" isn't necessary but it would be interesting to see whether you can break this way)
Put a breakpoint on Sheets.Add instead; practically speaking, there's no reason to put the breakpoint on a Print statement if you can just put it on the preceding line.
Are there any Addins? If so, disable all of them and re-enable one at a time, testing to see which one may contribute to the error.
Yet another Excel/VBA glitch.
When it happens to me when I click a button running a macro:
I first try to directly run the macro from VBE,
if it fails, then I put a breakpoint at the first instruction of the macro,
if it still fails, I try both,
or, after clicking the button and breaking on the first breakpoint, I do a single step (SHIFT F8) and then I can let debug run freely as usual (F5).
And so far I don't get this error anymore.
Probably not foolproof either but worth a try.
Ran into the same issue, and (as far as I can tell) the only relevant answer here is Answer 5 (i.e. the one provided by Chrisb).
I've been working with vba for (too many) years now, and never encountered this until I had a project that needed vba to delete ActiveX controls. In my case, the 'ActiveX controls' were a spurious result of data copied in from a web page.
Additionally, there appears to be a way around the issue. Using the following code (versus, e.g. deleting the ActiveX as a shape), seems to circumvent the issue:
On Error Resume Next
ActiveSheet.OLEObjects.Visible = True
ActiveSheet.OLEObjects.Delete
On Error GoTo 0
I say 'appears' and 'seems' above as implementing the above solved the issue for me. However, before I implemented same, I had made other code changes and I have not yet fully regression tested for all possible other reasons the problem was resolved. :)
This has happened to me multiple times and this solution works for me.
Run a different macro within the same VBA project.
Then go back and run the same macro that is causing the pop-up message to appear. The message should no longer appear.
I'm using the Ribbon control located on CodePlex, and following the tutorial located here . Once I add the reference, and the proper code in the designer I get this error when I try to view the form:
Exception of type 'System.ComponentModel.Design.ExceptionCollection' was thrown
And I cant figure out what I'm doing wrong. Anyone worked with this control and know how to resolve this issue?
Interesting; I just ran into this same issue with one of my own forms; which is how I found your relevant and recent question.
Here's how I solved it:
Open two instances of Visual Studio. Open the same project in both.
In one instance, goto Debug->Exceptions and enable all the 'Thrown' options to stop at first chance exceptions. This will stop the debugger when the exception is generated.
In the same instance, select Debug->Attach to Process, select devenv.exe.
In the other instance, open the form to cause the exception
With any luck the first instance should stop somewhere that yields a more relevant exception.
In my case it turned out to be something that I should have conditioned with:
if (!DesignMode)
{
// Do something that should only happen at runtime
}
Don't forget turn turn off all those 'Thrown' options later.
A workaround for me was:
Right-click on the form and 'View Code'
Keep the code loaded in the editor and then attempt to view the designer again.
This feels very glitchy and I cannot confirm whether it's a problem with my code (as I'm working on an entirely new codebase) or whether it's a VS2012 bug. If I find out, I will report back.
Since the solution outlined by pilotcam didn't work for me, I took a different approach:
Make a SVN commit for the file.
Open the “*.designer.cs” file of the form that shows the error in source view.
Remove larger blocks of form element declarations.
Fix all compilation errors with ReSharper (i.e. ensure that nothing is red anymore on the side-indicator).
Save the file. No need to compile.
Open the Windows Forms Designer of the form.
If the error still shows up, do a SVN revert to go back to the initial state.
Repeat steps 2 to 7 until the error does not show up anymore.
Now you’ve encircled the erroneous child control that causes the error.
Repeat steps 2 to 7 with a smaller amount of controls you remove, until you have only one control left.
In my case it was a user control inside a group control inside a tab control, so I first identified the tab control, then the group control and then the user control.
You could isolate the user control inside a new form to further investigate. In my case it was rather easy; I put checks for design mode around most of the functions inside my control to ensure the code only gets executed if the control is not in design mode.
This fixed my error.
I had the same issue and none of the above answers solved the problem.
At the end, emptying the "bin" folder and rebuild has worked for me.
Let me add two more cases when such exception can happen, along with when control tries to do something that is not allowed under design mode:
When it's impossible to compile the user control.
When designer code contains multiple similar (or identical) lines with initialization of same controls or properties, this can easily happen on merge.
All that cases produce same extremely meaningful error message, and in this particular two debugging of Visual Studio won't help, so I just ended up with bisecting my designer code.
[ReadOnly(true)]
[Browsable(false)]
Above all properties worked for me
Is there a way to convince the VBA editor in Excel to stop auto-formatting lines to remove the space at the end when I pause in my typing for a quarter second?
I had this exact problem and the following worked for me.
Click the Microsoft Office Button, and then click Excel Options
Click the Add-Ins category
In the Manage box, click COM Add-ins, and then click Go.
Look for an add in called 'Load Test Report AddIn' then uncheck it
restart excel
This addin is installed with VS2010 Beta2
In Excel 2010, toggling Design Mode button on the Developer Ribbon Tab solves the problem for me.
I've definitely had that issue before, where the vba editor would format as I was typing (not just when I went to another line). For me, it seemed to be related to a Microsoft Web Browser control that I had in an open workbook. When I took out the web browser, the VBA editor started acting normally again. I have no idea why that worked, but it did. Now I avoid using that control in my workbooks.
Something is causing your spreadsheet to recalculate while you are in the VBA Editor and this 'compiles' your code and thus strips the spaces. You need to stop the cells recalculating while you are editing. Turning the calculation to manual in the spreadsheet.
Tools > Options > Calculation should do the trick.
I noticed this when I had cells recalculating thanks to a DDE connection.
There is sort of a way to turn off the auto-"correction" in the VBA Editor.
Tools Menu -> Options -> Editor Tab -> Clear the Auto Syntax Check box
Sadly, this won't solve all your problems, as the VBA Editor tends to have a mind of its own, for better or worse.
Taking it out of design mode fixes it every-time on vba2003 - its was driving me crazy at first ... i did notice it might have something to do with the web control but when i take it out of design mode it works fine ... just toggle that to get it to behave :)
I have had this same problem several times recently, and has driven me crazy.
After reading this post all the different fix-ups mentioned (none worked for me), I recalled I have been playing lately with Internet Explorer Control, opening Internet Explorer from VBA.
This is mentioned in some of the answers in this post.
This got me in the right path and, in order to fix it, I had to first delete all iexplore.exe instances (alt+control+delete), closed Excel and open excel again.
(iexplore.exe had been opened invisible from the VBA code, and I didn't know they were running)
That fixed the bug.
I have been programming quite heavily with VBA for over 4 years, and never had this problem.
Just a couple of weeks ago I started using IE control, and I started getting this problem...so in my case I can only assume the bug is directly related to the IE control.
I am running both excel 2003 and 2007 in same PC at the same time, and the problem only happens with excel 2007.
None of the above for me.
I had a Application.OnTime timer that fired every second and this triggered a recalculation of something: commenting it made my day.
This has started happening to me recently after adding a Timer event to an Access 2007 form. The VB editor "finalizes" the current line (as if you had moved the cursor off of the statement; I have auto syntax checking off) each time the event fires (initially I had it set to 1 second, now it is set to 5 seconds, and the behavior scales accordingly). In order for the event code to execute, the application has to ensure that it has been compiled. Presumably, the editor needs to be in a "sane" state to do this, as it probably has to check for code dependencies among modules. Note that the behavior occurs regardless of whether any dependent code is actually loaded into the editor at the time. Note also that resetting the execution state doesn't affect the timer event firing. As a practical matter, one could close the triggering form, switch it to design view, set a breakpoint in the triggered code, or increase the timer interval while working with the editor.
In contrast to abhishek's comment, changing the settings of Tools/Options.../General/Compile On Demand and/or Background Compile did not affect the issue.
If it helps, none of the previous answers solved mine. Only solution appeared to be to close the xls file and reopen it. Frustrating to have to do every 30 mins but at least it works. Would love to know why it's recompiling and cleaning the text... should really be an option to disable the text cleanup but couldn't find it.
Turn off Tools > Options > General > Background Compile. This solved it for me.
This is a long standing problem that could have various causes. I had this same issue occur in the Access VBE (so naturally the Excel answers weren't relevant). After a LOT of digging I finally got it fixed with the solution below. First a recap though:
If you are here because of this issue in Excel, try the solutions above first. To summarize:
The most common issue in Excel is that the Design button is toggled. Toggle that and see if the behavior changes as submitted by Dmitry Frenkel above
If that doesn't work, check for the "Load Test Report" AddIn as mentioned by Ade.
Those are really the two main causes in Excel, but if neither of those solutions work, then scroll through the rest of the solutions here. All are valid possibilities for the cause. In Access the cause is pretty straight forward. It's a timer issue on a form somewhere. I found this solution from here by User Kevin K. Sullivan.
Copy the following line of code onto the clipboard. (You might need to
paste it into a text editor first and coerce it onto one line, depending on
your newsreader. It must be one line.)
For i = 0 to Forms.Count -1: Debug.Print Forms(i).Name, Forms(i).TimerInterval: Next i
Switch to Access.
Press Ctrl-G to go to the Immediate Window.
Press Ctrl-V to paste in the code.
Press enter to to run the code. All open forms will be listed. Any non-zero timer intervals are your culprits. Simply close that form (It may be invisibly open from another process than the one you thought you were dealing with).
I think the solution for Access here is what the user Dom was trying to say above. I guess the down votes were because it wasn't explained very well and/or because he was speaking of Access when the OG issue was in Excel. Regardless, he is likely on point if you are here because of the VBE in Access.
I hope this helps people. I know I kept finding this page when researching this issue, so that's why I thought I'd update this solution here.
I hit this problem today on a fresh install of Excel 2010 Beta 2. None of the above made any difference, but going into the trust center and disabling all application add-ins fixed the problem for me.
I have Office 2010 Pro and I had the same issue. As I type the space between each word was being deleted. After trying each of the options turning them on and off the only way I found working was to disable the Winzip Courie(excel) add-in. This is done thru the Options dialog box Add-Ins section.
In office 365 I had the same issue - what worked for me is I saved the file with a different name and when I re-opened the new file the problem went away.
I found this issue pops up when I had AutoSave on. Turning that off let me code without it compiling every second.
I don't think I've ever seen the VBE remove a space when I've stopped typing. It will remove trailling spaces from lines if you move to another line, but that's something different and not behaviour that I think can be altered.
The removal of spaces in the VBA editor for Access occurs when a form is open in Form("Execute") mode. This is probably due to background executions based on "On Timer" methods. Close the form in Access solves the problem in VBA.