I want to install node.js on QNAP NAS, it's a linux OS I can use ipkg install package.
but ipkg not have node.js...
I reference web forum as http://forum.qnap.com/viewtopic.php?p=248556, installed V8 JavaScript Engine.
Then install node.js
When I'm typing make on /opt/node, that shows an error message as follows:
make -C out BUILDTYPE=Release V=1 make[1]: Entering directory
/share/HDA_DATA/.qpkg/Optware/node/out' flock
/share/HDA_DATA/.qpkg/Optware/node/out/Release/linker.lock g++
-pthread -rdynamic -o /share/HDA_DATA/.qpkg/Optware/node/out/Release/mksnapshot
-Wl,--start-group /share/HDA_DATA/.qpkg/Optware/node/out/Release/obj.target/mksnapshot/deps/v8/src/mksnapshot.o
/share/HDA_DATA/.qpkg/Optware/node/out/Release/obj.target/deps/v8/tools/gyp/libv8_base.a
/share/HDA_DATA/.qpkg/Optware/node/out/Release/obj.target/deps/v8/tools/gyp/libv8_nosnapshot.a
-Wl,--end-group make[1]: flock: Command not found make[1]: *** [/share/HDA_DATA/.qpkg/Optware/node/out/Release/mksnapshot] Error 127
make[1]: Leaving directory/share/HDA_DATA/.qpkg/Optware/node/out'
make: * [node] Error 2
The QNAP NAS(TS-119P2) does not have flock command line,
What can I do? Could somebody help me?
ipkg install util-linux
It contains flock command.
Goto node source dir.
./configure --prefix=/opt
...
LINK=g++ make
...
LINK=g++ make install
Worked for me.
I had to export CC as my compiler, and then run the commands babalooi suggested:
export CC=/opt/bin/gcc
./configure --prefix=/opt
...
LINK=g++ make
...
LINK=g++ make install
Related
I'm testing the new bash on ubuntu on windows 10 and the first thing I tried to do is to install node. Of course, since I now have a "Linux system" I went ahead and installed nvm.
I also had to
apt-get make gcc g++
One done i tried
nvm install v4.4.2
but I got:
make -C out BUILDTYPE=Release V=1
make[1]: Entering directory `/root/.nvm/src/node-v4.4.2/out'
g++ -pthread -rdynamic -m64 -fuse-ld=gold -B/root/.nvm/src/node-
v4.4.2/third_party/binutils/Linux_x64/Release/bin -m64 -o /root/.nvm/src/node-v4.4.2/out/Release/mksnapshot -Wl,--start-group /root/.nvm/src/node-v4.4.2/out/Release/obj.target/mksnapshot/deps/v8/src/snapshot/mksnapshot.o /root/.nvm/src/node-v4.4.2/out/Release/obj.target/deps/v8/tools/gyp/libv8_base.a /root/.nvm/src/node-v4.4.2/out/Release/obj.target/deps/v8/tools/gyp/libv8_nosnapshot.a /root/.nvm/src/node-v4.4.2/out/Release/obj.target/deps/v8/tools/gyp/libv8_libplatform.a /root/.nvm/src/node-v4.4.2/out/Release/obj.target/deps/v8/tools/gyp/libv8_libbase.a -Wl,--end-group -ldl -lrt
/usr/bin/ld.gold: fatal error: /root/.nvm/src/node-v4.4.2/out/Release/mksnapshot: Invalid argument
collect2: error: ld returned 1 exit status
make[1]: *** [/root/.nvm/src/node-v4.4.2/out/Release/mksnapshot] Error 1
make[1]: Leaving directory `/root/.nvm/src/node-v4.4.2/out'
make: *** [node] Error 2
nvm: install v4.4.2 failed!
Do you know what's causing this? I think that I may have something missconfigured on the make command maybe?
NOTE: installing node using the "official way" works, that is:
curl -sL https://deb.nodesource.com/setup_4.x | sudo -E bash -
sudo apt-get install -y nodejs
I think it's an issue in the bash subsystem. There are several open issues on github.com relating to installing nvm, rbenv, rvm, as well as creating symlinks.
These two issues appear to be directly related to the problem you're experiencing.
https://github.com/Microsoft/BashOnWindows/issues/6
https://github.com/Microsoft/BashOnWindows/issues/9
Also, FYI, I have attempted to build node 4 and node 5 from source, but fail during the make command with this message:
/usr/bin/ld.gold: fatal error: /root/working/node-v5.10.1/out/Release/mksnapshot: Invalid argument
collect2: error: ld returned 1 exit status
I wish to install redis on my red-hat environment. I do the following:
wget http://download.redis.io/redis-stable.tar.gz
tar xvzf redis-stable.tar.gz
cd redis-stable
make
I got the next error:
make[3]: *** [net.o] Error 127
make[3]: Leaving directory `/tmp/redis-stable/deps/hiredis'
make[2]: *** [hiredis] Error 2
make[2]: Leaving directory `/tmp/redis-stable/deps'
make[1]: [persist-settings] Error 2 (ignored)
CC adlist.o
/bin/sh: cc: command not found
make[1]: *** [adlist.o] Error 127
make[1]: Leaving directory `/tmp/redis-stable/src'
make: *** [all] Error 2
How can I fix it?
You are trying to install redis from source code. What this process do is to compile and create executable on your machine and then install it. For doing this you need various tools like gcc etc. Best way is to install all of them together by installing that group. Run this from terminal
yum grouplist
This will show all groups available and then choose group you want to install or run directly
yum groupinstall 'Development Tools'
This will save you from other problems which might come in future while installing from source.
for those of you who encounter this error
check this github issue
before make run this command
$ cd deps; make hiredis lua jemalloc linenoise
Install build essential first
sudo apt-get install build-essential
then install the dependencies
cd deps
make hiredis lua jemalloc linenoise
If you're not an advanced user maybe it is not a good idea to install REDIS from the source.
Instead you should install a packaged version. For example on Fedora / Centos / RHEL:
sudo yum install redis
Come out from your extracted folder/Dir and remove the extracted redis-x.x.x folder with rm -rf redis-x.x.x
now again extract the redis folder with tar xzf redis-x.x.x.tar.gz
go to redis directory again and run the make or make test again. it works for me.
When I run the command, make from the 0.4.4 oculus linux package, I keep getting this error:
g++ -o ./Release/OculusWorldDemo_x86_64_Debug ./Obj/Linux/Debug/x86_64/OculusWorldDemo.o ./Obj/Linux/Debug/x86_64/OculusWorldDemo_Scene.o ./Obj/Linux/Debug/x86_64/Player.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Util/RenderProfiler.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Util/OptionMenu.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Platform/Linux_Gamepad.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Platform/Linux_Platform.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Platform/Platform.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Render/Render_Device.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Render/Render_GL_Device.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Render/Render_LoadTextureDDS.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Render/Render_LoadTextureTGA.o ./Obj/Linux/Debug/x86_64/../CommonSrc/Render/Render_XmlSceneLoader.o ./Obj/Linux/Debug/x86_64/../../3rdParty/TinyXml/tinyxml2.o -L../../LibOVR/Lib/Linux/Debug/x86_64 -lovr -ludev -lpthread -lGL -lX11 -lXrandr -lrt
/usr/bin/ld: cannot find -ludev
collect2: error: ld returned 1 exit status
make[1]: *** [Release/OculusWorldDemo_x86_64_Debug] Error 1
make[1]: Leaving directory `/mo/software/oculus/ovr_sdk_linux_0.4.4/Samples/OculusWorldDemo'
make: *** [Samples/OculusWorldDemo/Release/OculusWorldDemo_x86_64_Debug] Error 2
What do I need to do to make Oculus work? I've had this for over 2 months now and haven't used yet because installation hasnt been possible to resolve.
You need to install the libudevand libudev-dev packages.
sudo apt-get install libudev-dev libudev0
get ludev from http://packages.ubuntu.com/precise/i386/libudev0/download
download it, then install package with
sudo dpkg -i libudev0_175-0ubuntu9_i386.deb
you may have to do a
sudo apt-get install libudev-dev libudev0
for good measure
now you can do the make , make run
I'm installing valgrind now, until the ‘make install’ command it goes good.
The next command- ‘make regtest’ outputs the next error:
../../depcomp: line 689: exec: g++: not found
make[5]: *** [leak_cpp_interior.o] Error 127
make[5]: Leaving directory `/home/kbubuntu/valgrind-3.9.0/memcheck/tests'
make[4]: *** [check-am] Error 2
make[4]: Leaving directory `/home/kbubuntu/valgrind-3.9.0/memcheck/tests'
make[3]: *** [check-recursive] Error 1
make[3]: Leaving directory `/home/kbubuntu/valgrind-3.9.0/memcheck/tests'
make[2]: *** [check-recursive] Error 1
make[2]: Leaving directory `/home/kbubuntu/valgrind-3.9.0/memcheck'
make[1]: *** [check-recursive] Error 1
make[1]: Leaving directory `/home/kbubuntu/valgrind-3.9.0'
make: *** [check] Error 2
How can I solve it?
Thanks.
Short answer: Make from source.
How?
Uninstall the non working valgrind version with root rights (eg. sudo):
apt-get --purge valgrind
or
dpkg --remove valgrind
or
yum remove valgrind
Obtain sources from here.
Identify the latest version (for example 3.17.0)
Download sources : wget https://sourceware.org/pub/valgrind/valgrind-3.17.0.tar.bz2
Decompress archive tar xvf valgrind-3.17.0.tar.bz2
Go to uncompressed archive cd valgrind-3.17.0
Configure ./configure
Compile make
Install make install (with root rights, eg. sudo)
Note: very useful for Raspberry Pi 4 users - Default valgrind installation generate a lot of internal errors. See Valgrind reports hundreds of errors in Hello World program on RaspberryPi 4B
All major linux distributions will include valgrind in their repositories. You can find this on debian derived, apt based systems with:
apt search valgrind
But first just try:
apt install valgrind
It should work, and pull in any dependencies. Remember, if you are not the superuser, you'll need to preface those with sudo.
It's a great tool, have fun.
i think its due to dependency not met.
install g++
by
sudo apt-get install g++
then try again.
error is due to exec is unable to find any package named g++
When trying to install Valgrind in Ubuntu 20.04, you can use apt or snap (notice the version number):
:~/valgrind-3.18.1$ valgrind
Command 'valgrind' not found, but can be installed with:
sudo snap install valgrind # version 3.18.1, or sudo apt install
valgrind # version 1:3.15.0-1ubuntu9.1
Although snap provides the latest version, I preferred to install it natively by compiling the source code following the #g10guang instructions.
I am trying to run the make command over the NVIDIA CUDA Sample files. I navigated to the directory and typed make. Below is the output.
root#ubuserver3:/home/ubuadmin/CUDA/SampleInstalled/NVIDIA_CUDA-5.5_Samples# make
make[1]: Entering directory `/home/ubuadmin/CUDA/SampleInstalled/NVIDIA_CUDA-5.5_Samples/0_Simple/simpleAssert'
"/home/ubuadmin/CUDA"/bin/nvcc -ccbin g++ -I../../common/inc -m32 -gencode arch=compute_20,code=sm_20 -gencode arch=compute_30,code=sm_30 -gencode arch=compute_35,code=\"sm_35,compute_35\" -o simpleAssert.o -c simpleAssert.cu
g++: No such file or directory
make[1]: *** [simpleAssert.o] Error 1
make[1]: Leaving directory `/home/ubuadmin/CUDA/SampleInstalled/NVIDIA_CUDA-5.5_Samples/0_Simple/simpleAssert'
make: *** [0_Simple/simpleAssert/Makefile.ph_build] Error 2
root#ubuserver3:/home/ubuadmin/CUDA/SampleInstalled/NVIDIA_CUDA-5.5_Samples#
There is an error which I do not understand why.
If you search you'll find many answers for this question. Basically, you don't have a compiler installed on your system.
Since you're running Ubuntu, run sudo apt-get install build-essential to get all the packages needed to compile software.